Steps on the way to 6.12-rc1
Bug: 367265496
Change-Id: I1ece105acb05b97d8cd9299ed0ee6a81a74fd353
Signed-off-by: Matthias Maennich <maennich@google.com>
Steps on the way to 6.12-rc1
Bug: 367265496
Change-Id: I115d487c6294c249dd30b708b3164f34be34d874
Signed-off-by: Matthias Maennich <maennich@google.com>
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
vdso_test_correctness test fails on powerpc:
~ # ./vdso_test_correctness
...
[RUN] Testing clock_gettime for clock CLOCK_REALTIME_ALARM (8)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_BOOTTIME_ALARM (9)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_SGI_CYCLE (10)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
...
[RUN] Testing clock_gettime for clock invalid (-1)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (-2147483648)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (2147483647)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
On powerpc, a call to a VDSO function is not an ordinary C function
call. Unlike several architectures which returns a negative error code
in case of an error, powerpc sets CR[SO] and returns the error code
as a positive value.
Define and use a macro called VDSO_CALL() which takes a pointer
to the function to call, the number of arguments and the arguments.
Also update ABI vdso documentation to reflect this subtlety.
Provide a specific version of VDSO_CALL() for powerpc that negates
the error code on return when CR[SO] is set.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Fixes: 2e9a972566 ("selftests: vdso: Add a selftest for vDSO getcpu()")
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Fixes: b2f1c3db28 ("kselftest: Extend vdso correctness test to clock_gettime64")
Fixes: 4920a2590e ("selftests/vDSO: add tests for vgetrandom")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Pull char / misc and other driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.11-rc1. Nothing major in here, just loads of new drivers and
updates. Included in here are:
- IIO api updates and new drivers added
- wait_interruptable_timeout() api cleanups for some drivers
- MODULE_DESCRIPTION() additions for loads of drivers
- parport out-of-bounds fix
- interconnect driver updates and additions
- mhi driver updates and additions
- w1 driver fixes
- binder speedups and fixes
- eeprom driver updates
- coresight driver updates
- counter driver update
- new misc driver additions
- other minor api updates
All of these, EXCEPT for the final Kconfig build fix for 32bit
systems, have been in linux-next for a while with no reported issues.
The Kconfig fixup went in 29 hours ago, so might have missed the
latest linux-next, but was acked by everyone involved"
* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
misc: delete Makefile.rej
binder: fix hang of unregistered readers
misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
virtio: add missing MODULE_DESCRIPTION() macro
agp: uninorth: add missing MODULE_DESCRIPTION() macro
spmi: add missing MODULE_DESCRIPTION() macros
dev/parport: fix the array out-of-bounds risk
samples: configfs: add missing MODULE_DESCRIPTION() macro
misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
misc: keba: Fix missing AUXILIARY_BUS dependency
slimbus: Fix struct and documentation alignment in stream.c
MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
misc: fastrpc: use coherent pool for untranslated Compute Banks
misc: fastrpc: support complete DMA pool access to the DSP
misc: fastrpc: add missing MODULE_DESCRIPTION() macro
misc: fastrpc: Add missing dev_err newlines
misc: fastrpc: Use memdup_user()
nvmem: core: Implement force_ro sysfs attribute
nvmem: Use sysfs_emit() for type attribute
...
Pull backlight updates from Lee Jones:
"New Drivers:
- Texas Instruments LM3509 Backlight Driver
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Drop i2c_device_id::driver_data where the value is unused
- Make use of the new *_scoped() guard APIs
- Decouple from fbdev by providing Backlight with its own
BACKLIGHT_POWER_* constrains
Bug Fixes:
- Correctly assess return values (NULL vs IS_ERR())
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings"
* tag 'backlight-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (23 commits)
backlight: sky81452-backlight: Use backlight power constants
backlight: rave-sp-backlight: Use backlight power constants
backlight: pwm-backlight: Use backlight power constants
backlight: pcf50633-backlight: Use backlight power constants
backlight: pandora-backlight: Use backlight power constants
backlight: mp3309c: Use backlight power constants
backlight: lm3533-backlight: Use backlight power constants
backlight: led-backlight: Use backlight power constants
backlight: ktd253-backlight: Use backlight power constants
backlight: kb3886-bl: Use backlight power constants
backlight: journada_bl: Use backlight power constants
backlight: ipaq-micro-backlight: Use backlight power constants
backlight: gpio-backlight: Use backlight power constants
backlight: corgi-lcd: Use backlight power constants
backlight: ams369fb06: Use backlight power constants
backlight: aat2870-backlight: Use blacklight power constants
backlight: Add BACKLIGHT_POWER_ constants for power states
backlight: lm3509_bl: Fix early returns in for_each_child_of_node()
backlight: Drop explicit initialization of struct i2c_device_id::driver_data to 0
backlight: Add missing MODULE_DESCRIPTION() macros
...
Implement "force_ro" sysfs attribute to allow users to set read-write
devices as read-only and back to read-write from userspace. The choice
of the name is based on MMC core 'force_ro' attribute.
This solves a situation where an AT24 I2C EEPROM with GPIO based nWP
signal may have to be occasionally updated. Such I2C EEPROM device is
usually set as read-only during most of the regular system operation,
but in case it has to be updated in a controlled manner, it could be
unlocked using this new "force_ro" sysfs attribute and then re-locked
again.
The "read-only" DT property and config->read_only configuration is
respected and is used to set default state of the device, read-only
or read-write, for devices which do implement .reg_write function.
For devices which do not implement .reg_write function, the device
is unconditionally read-only and the "force_ro" attribute is not
visible.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-16-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Duplicate FB_BLANK_ constants as BACKLIGHT_POWER__ constants in the
backlight header file. Allows backlight drivers to avoid including
the fbdev header file and removes a compile-time dependency between
the two subsystems.
The new BACKLIGHT_POWER_ constants have the same values as their
FB_BLANK_ counterparts. Hence UAPI and internal semantics do not
change. The backlight drivers can be converted one by one. Each
instance of FB_BLANK_UNBLANK becomes BACKLIGHT_POWER_ON, each of
FB_BLANK_POWERDOWN becomes BACKLIGHT_POWER_OFF, and FB_BLANK_NORMAL
becomes BACKLIGHT_POWER_REDUCED.
Backlight code or drivers do not use FB_BLANK_VSYNC_SUSPEND and
FB_BLANK_HSYNC_SUSPEND, so no new constants for these are being
added.
The semantics of FB_BLANK_NORMAL appear inconsistent. In fbdev,
NORMAL means display off with sync enabled. In backlight code,
this translates to turn the backlight off, but some drivers
interpret it as backlight on. So we keep the current code as is,
but mark BACKLIGHT_POWER_REDUCED as deprecated. Drivers should be
fixed and the constant removed. This affects ams369fg06 and a few
DRM panel drivers.
v2:
- rename BL_CORE_ power constants to BACKLIGHT_POWER_ (Sam)
- fix documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag
New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
of an atomic write which the device may support. It is not
necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
and atomic_write_max_sectors would be the limit on a merged atomic write
request size. This value is not capped at max_sectors, as the value in
max_sectors can be controlled from userspace, and it would only cause
trouble if userspace could limit atomic_write_unit_max_bytes and the
other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
min/max length of an atomic write unit which the device may support. They
both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
indicates an LBA space boundary at which an atomic write straddles no
longer is atomically executed by the disk. The value must be a
power-of-2. Note that it would be acceptable to enforce a rule that
atomic_write_hw_boundary_sectors is a multiple of
atomic_write_hw_unit_max, but the resultant code would be more
complicated.
All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.
An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.
New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
bytes
- atomic_write_max_bytes - same as atomic_write_max_sectors in bytes
Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary
Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.
FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.
Flag REQ_ATOMIC is used for indicating an atomic write.
Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
Pull EFI updates from Ard Biesheuvel:
"Only a handful of changes this cycle, consisting of cleanup work and a
low-prio bugfix:
- Additional cleanup by Tim for the efivarfs variable name length
confusion
- Avoid freeing a bogus pointer when virtual remapping is omitted in
the EFI boot stub"
* tag 'efi-next-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: only free priv.runtime_map when allocated
efi: Clear up misconceptions about a maximum variable name size
efivarfs: Remove unused internal struct members
Documentation: Mark the 'efivars' sysfs interface as removed
efi: pstore: Request at most 512 bytes for variable names
One the one hand, it's marked EXPERIMENTAL since 2017, and looks like
there are no users since then, and no testers and no developers, it's
just not active at all.
On the other hand, even if the config is disabled, there are still many
fields in throtl_grp and throtl_data and many functions that are only
used for throtl low.
At last, currently blk-throtl is initialized during disk initialization,
and destroyed during disk removal, and it exposes many functions to be
called directly from block layer.
Remove throtl low to make code much more cleaner and follow up work much
easier.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240509121107.3195568-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add sysfs entry to allow users of MHI bus to force device to enter EDL
(Emergency Download) mode to download the device firmware. Since there is
no guarantee that all the devices will support EDL mode, the sysfs entry
is kept as an optional one and will appear only for the supported devices.
Controllers supporting the EDL mode are expected to provide edl_trigger()
callback that puts the device into EDL mode.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1713928915-18229-2-git-send-email-quic_qianyu@quicinc.com
[mani: fixed the kernel version and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The 'efivars' sysfs interface was removed in commit 0f5b2c69a4 ("efi:
vars: Remove deprecated 'efivars' sysfs interface"), but the ABI
documentation was not updated properly.
Strip down the documentation file for /sys/firmware/efi/vars to a very
basic description of what the interface was about, add a section about
the rough removal timeline, and inform the reader about the intended
replacement.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Steps on the way to 6.6-rc1
Resolves merge conflict in:
drivers/dma-buf/heaps/system_heap.c
Change-Id: I48f2f1ef6f3caa51f220705c3c53be266e0dcefc
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Pull x86 platform driver updates from Hans de Goede:
- hp-bioscfg: New firmware-attributes driver for changing BIOS settings
from within Linux
- asus-wmi: Add charger mode, middle fan and eGPU settings support
- ideapad: Support keyboard backlight control on more models
- mellanox: Support for new models
- sel-3350: New LED and power-supply driver for this industrial
mainboard
- simatic-ipc: Add RTC battery monitor and various new models support
- miscellaneous other cleanups / fixes
* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
platform/x86: asus-wmi: corrections to egpu safety check
platform/x86: mlx-platform: Add dependency on PCI to Kconfig
platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
platform/x86/amd/pmc: Fix build error with randconfig
platform/x86/amd/pmf: Fix a missing cleanup path
watchdog: simatic: Use idiomatic selection of P2SB
platform/x86: p2sb: Make the Kconfig symbol hidden
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform: mellanox: nvsw-sn2201: change fans i2c busses.
platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
platform: mellanox: Add initial support for PCIe based programming logic device
platform: mellanox: mlx-platform: Get interrupt line through ACPI
platform: mellanox: mlx-platform: Introduce ACPI init flow
platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
platform: mellanox: mlx-platform: Add reset callback
platform: mellanox: Cosmetic changes
platform: mellanox: mlx-platform: Modify power off callback
platform: mellanox: mlx-platform: add support for additional CPLD
platform: mellanox: mlx-platform: Add reset cause attribute
platform: mellanox: mlx-platform: Modify health and power hotplug action
...
Add documentation for the new attributes:
- CPLD versioning: "cpld5_pn", "cpld5_version", "cpld5_version_min".
- JTAG capability: "jtag_cap", indicating the available method of
CPLD/FPGA devices field update.
- System lid status: "lid_open".
- Reset caused by long press of power button: "reset_long_pwr_pb".
- Reset caused by switch board DC-DC converter device failure:
"reset_swb_dc_dc_pwr_fail".
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230822113451.13785-17-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
@codeaurora.org email addresses are no longer valid and will bounce to
sender. Also, Bhaumik has previously indicated he is no longer interested
in participating in MHI bus discussions.
Update contact info from Bhaumik to the mhi mail list so that mails will
be routed to the MHI maintainers and interested parties.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230628182346.3855-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Config MODULE_SCMVERSION introduces a new module attribute --
`scmversion` -- which can be used to identify a given module's SCM
version. This is very useful for developers that update their kernel
independently from their kernel modules or vice-versa since the SCM
version provided by UTS_RELEASE (`uname -r`) will now differ from the
module's vermagic attribute.
For example, we have a CI setup that tests new kernel changes on the
hikey960 and db845c devices without updating their kernel modules. When
these tests fail, we need to be able to identify the exact device
configuration the test was using. By including MODULE_SCMVERSION, we can
identify the exact kernel and modules' SCM versions for debugging the
failures.
Additionally, by exposing the SCM version via the sysfs node
/sys/module/MODULENAME/scmversion, one can also verify the SCM versions
of the modules loaded from the initramfs. Currently, modinfo can only
retrieve module attributes from the module's ko on disk and not from the
actual module that is loaded in RAM.
You can retrieve the SCM version in two ways,
1) By using modinfo:
> modinfo -F scmversion MODULENAME
2) By module sysfs node:
> cat /sys/module/MODULENAME/scmversion
Bug: 180027765
Bug: 236871190
Link: https://lore.kernel.org/all/20210121213641.3477522-1-willmcvicker@google.com/
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Yifan Hong <elsk@google.com>
Change-Id: Iad77caff63c4ddef3a3c92182cdacb0b90b124c7
Pull dmaengine updates from Vinod Koul:
"New support:
- Apple admac t8112 device support
- StarFive JH7110 DMA controller
Updates:
- Big pile of idxd updates to support IAA 2.0 device capabilities,
DSA 2.0 Event Log and completion record faulting features and
new DSA operations
- at_xdmac supend & resume updates and driver code cleanup
- k3-udma supend & resume support
- k3-psil thread support for J784s4"
* tag 'dmaengine-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (57 commits)
dmaengine: idxd: add per wq PRS disable
dmaengine: idxd: add pid to exported sysfs attribute for opened file
dmaengine: idxd: expose fault counters to sysfs
dmaengine: idxd: add a device to represent the file opened
dmaengine: idxd: add per file user counters for completion record faults
dmaengine: idxd: process batch descriptor completion record faults
dmaengine: idxd: add descs_completed field for completion record
dmaengine: idxd: process user page faults for completion record
dmaengine: idxd: add idxd_copy_cr() to copy user completion record during page fault handling
dmaengine: idxd: create kmem cache for event log fault items
dmaengine: idxd: add per DSA wq workqueue for processing cr faults
dmanegine: idxd: add debugfs for event log dump
dmaengine: idxd: add interrupt handling for event log
dmaengine: idxd: setup event log configuration
dmaengine: idxd: add event log size sysfs attribute
dmaengine: idxd: make misc interrupt one shot
dt-bindings: dma: snps,dw-axi-dmac: constrain the items of resets for JH7110 dma
dt-bindings: dma: Drop unneeded quotes
dmaengine: at_xdmac: align declaration of ret with the rest of variables
dmaengine: at_xdmac: add a warning message regarding for unpaused channels
...
Hsin-chen Chuang
Greg Kroah-Hartman
Yafang Shao
Matthias Maennich
Linus Torvalds
Matthew Wilcox
Christophe Leroy
Lee Jones
Will McVicker
Marek Vasut
Thomas Zimmermann
Gerhard Engleder
John Garry
Yu Kuai
Christoph Hellwig
Qiang Yu
Tim Schumacher
Dave Jiang
Vadim Pasternak
Bjorn Helgaas
Jeffrey Hugo
Rex Zhang
Anthony Iliopoulos
Treehugger Robot
Armin Wolf