Merge tag 'extcon-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v6.7

Detailed description for this pull request:
- Add new Realtek DHC(Digital Home Hub) RTD SoC external connector driver
: Detect USB Type C cable detection for USB and USB_HOST cable
  and support USB Type-C connector class. The extcon-rtk-type-c.c driver
  supports the following Realtek RTD SoC:
  - realtek,rtd1295-type-c
  - realtek,rtd1312c-type-c
  - realtek,rtd1315e-type-c
  - realtek,rtd1319-type-c
  - realtek,rtd1319d-type-c
  - realtek,rtd1395-type-c
  - realtek,rtd1619-type-c
  - realtek,rtd1619b-type-c

- Add device-tree compatible string for extcon-max77693 and extcon-77843.c.

* tag 'extcon-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: realtek: add the error handler for nvmem_cell_read
  extcon: max77843: add device-tree compatible string
  extcon: max77693: add device-tree compatible string
  dt-bindings: usb: Add Realtek DHC RTD SoC Type-C
  extcon: add Realtek DHC RTD SoC Type-C driver

Documentation/devicetree/bindings/usb/realtek,rtd-type-c.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/realtek,rtd-type-c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC RTD SoCs USB Type-C Connector detection
+
+maintainers:
+  - Stanley Chang <stanley_chang@realtek.com>
+
+description:
+  Realtek digital home center (DHC) RTD series SoCs include a type c module.
+  This module is able to detect the state of type c connector.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-type-c
+      - realtek,rtd1312c-type-c
+      - realtek,rtd1315e-type-c
+      - realtek,rtd1319-type-c
+      - realtek,rtd1319d-type-c
+      - realtek,rtd1395-type-c
+      - realtek,rtd1619-type-c
+      - realtek,rtd1619b-type-c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  nvmem-cell-names:
+    items:
+      - const: usb-cal
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      The phandle to nvmem cell that contains the trimming data.
+      The type c parameter trimming data specified via efuse.
+      If unspecified, default value is used.
+
+  realtek,rd-ctrl-gpios:
+    description: The gpio node to control external Rd on board.
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    description: Properties for usb c connector.
+    type: object
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    type-c@7220 {
+        compatible = "realtek,rtd1619b-type-c";
+        reg = <0x7220 0x20>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&usb_cc1_pins>, <&usb_cc2_pins>;
+        nvmem-cells = <&otp_usb_cal>;
+        nvmem-cell-names = "usb-cal";
+
+        connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            data-role = "dual";
+            power-role = "dual";
+        };
+    };

drivers/extcon/Kconfig

@@ -191,4 +191,15 @@ config EXTCON_USBC_TUSB320
 	  Say Y here to enable support for USB Type C cable detection extcon
 	  support using a TUSB320.
 
+config EXTCON_RTK_TYPE_C
+	tristate "Realtek RTD SoC extcon Type-C Driver"
+	depends on ARCH_REALTEK || COMPILE_TEST
+	depends on TYPEC
+	select USB_COMMON
+	help
+	  Say Y here to enable extcon support for USB Type C cable detection
+	  when using the Realtek RTD SoC USB Type-C port.
+	  The DHC (Digital Home Hub) RTD series SoC contains a type c module.
+	  This driver will detect the status of the type-c port.
+
 endif

drivers/extcon/Makefile

@@ -25,3 +25,4 @@ obj-$(CONFIG_EXTCON_SM5502)	+= extcon-sm5502.o
 obj-$(CONFIG_EXTCON_USB_GPIO)	+= extcon-usb-gpio.o
 obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o
 obj-$(CONFIG_EXTCON_USBC_TUSB320) += extcon-usbc-tusb320.o
+obj-$(CONFIG_EXTCON_RTK_TYPE_C) += extcon-rtk-type-c.o

drivers/extcon/extcon-max77693.c

@@ -1258,9 +1258,16 @@ static int max77693_muic_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static const struct of_device_id of_max77693_muic_dt_match[] = {
+	{ .compatible = "maxim,max77693-muic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_max77693_muic_dt_match);
+
 static struct platform_driver max77693_muic_driver = {
 	.driver		= {
 		.name	= DEV_NAME,
+		.of_match_table = of_max77693_muic_dt_match,
 	},
 	.probe		= max77693_muic_probe,
 };

drivers/extcon/extcon-max77843.c

@@ -946,9 +946,16 @@ static const struct platform_device_id max77843_muic_id[] = {
 };
 MODULE_DEVICE_TABLE(platform, max77843_muic_id);
 
+static const struct of_device_id of_max77843_muic_dt_match[] = {
+	{ .compatible = "maxim,max77843-muic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, of_max77843_muic_dt_match);
+
 static struct platform_driver max77843_muic_driver = {
 	.driver		= {
 		.name		= "max77843-muic",
+		.of_match_table = of_max77843_muic_dt_match,
 	},
 	.probe		= max77843_muic_probe,
 	.remove		= max77843_muic_remove,