Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "Likely our final small batch of fixes for 5.2:

   - Some fixes for USB on davinci, regressions were due to the recent
     conversion of the OCHI driver to use GPIO regulators

   - A fixup of kconfig dependencies for a TI irq controller

   - A switch of armada-38x to avoid dropped characters on uart, caused
     by switch of base inherited platform description earlier this year"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: davinci: da830-evm: fix GPIO lookup for OHCI
  ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
  ARM: davinci: da830-evm: add missing regulator constraints for OHCI
  soc: ti: fix irq-ti-sci link error
  ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node

arch/arm/boot/dts/armada-xp-98dx3236.dtsi

@@ -336,3 +336,11 @@
 	status = "disabled";
 };
 
+&uart0 {
+	compatible = "marvell,armada-38x-uart";
+};
+
+&uart1 {
+	compatible = "marvell,armada-38x-uart";
+};
+

arch/arm/mach-davinci/board-da830-evm.c

@@ -61,6 +61,9 @@ static struct regulator_consumer_supply da830_evm_usb_supplies[] = {
 static struct regulator_init_data da830_evm_usb_vbus_data = {
 	.consumer_supplies	= da830_evm_usb_supplies,
 	.num_consumer_supplies	= ARRAY_SIZE(da830_evm_usb_supplies),
+	.constraints    = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
 };
 
 static struct fixed_voltage_config da830_evm_usb_vbus = {
@@ -88,7 +91,7 @@ static struct gpiod_lookup_table da830_evm_usb_oc_gpio_lookup = {
 static struct gpiod_lookup_table da830_evm_usb_vbus_gpio_lookup = {
 	.dev_id		= "reg-fixed-voltage.0",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
+		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, NULL, 0),
 		{ }
 	},
 };

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -306,6 +306,9 @@ static struct regulator_consumer_supply hawk_usb_supplies[] = {
 static struct regulator_init_data hawk_usb_vbus_data = {
 	.consumer_supplies	= hawk_usb_supplies,
 	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
+	.constraints    = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
 };
 
 static struct fixed_voltage_config hawk_usb_vbus = {

drivers/soc/Makefile

@@ -22,7 +22,7 @@ obj-$(CONFIG_ARCH_ROCKCHIP)	+= rockchip/
 obj-$(CONFIG_SOC_SAMSUNG)	+= samsung/
 obj-y				+= sunxi/
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
-obj-$(CONFIG_SOC_TI)		+= ti/
+obj-y				+= ti/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
 obj-y				+= xilinx/

drivers/soc/ti/Kconfig

@@ -75,10 +75,10 @@ config TI_SCI_PM_DOMAINS
 	  called ti_sci_pm_domains. Note this is needed early in boot before
 	  rootfs may be available.
 
+endif # SOC_TI
+
 config TI_SCI_INTA_MSI_DOMAIN
 	bool
 	select GENERIC_MSI_IRQ_DOMAIN
 	help
 	  Driver to enable Interrupt Aggregator specific MSI Domain.
-
-endif # SOC_TI