tmakin/tegra-linux-noble
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

platform/chrome: cros_ec_lpc: Choose Microchip EC at runtime

Browse Source 
On many boards, communication between the kernel and the Embedded
Controller happens over an LPC bus. In these cases, the kernel config
CONFIG_CROS_EC_LPC is enabled. Some of these LPC boards contain a
Microchip Embedded Controller (MEC) that is different from the regular
EC. On these devices, the same LPC bus is used, but the protocol is
a little different. In these cases, the CONFIG_CROS_EC_LPC_MEC kernel
config is enabled. Currently, the kernel decides at compile-time whether
or not to use the MEC variant, and, when that kernel option is selected
it breaks the other boards. We would like a kind of runtime detection to
avoid this.

This patch adds that detection mechanism by probing the protocol at
runtime, first we assume that a MEC variant is connected, and if the
protocol fails it fallbacks to the regular EC. This adds a bit of
overload because we try to read twice on those LPC boards that doesn't
contain a MEC variant, but is a better solution than having to select the
EC variant at compile-time.

While here also fix the alignment in Kconfig file for this config option
replacing the spaces by tabs.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Nick Crews <ncrews@chromium.org>
This commit is contained in:
Enric Balletbo i Serra
2019-06-14 23:43:01 +02:00
parent 4116fd25c5
commit 22c040fa21
4 changed files with 95 additions and 97 deletions
Download Patch File Download Diff File Expand all files Collapse all files
drivers/platform/chrome/Kconfig
+9 -20
View File
@@ -95,28 +95,17 @@ config CROS_EC_SPI
'pre-amble' bytes before the response actually starts.
config CROS_EC_LPC
tristate "ChromeOS Embedded Controller (LPC)"
depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
help
If you say Y here, you get support for talking to the ChromeOS EC
over an LPC bus. This uses a simple byte-level protocol with a
checksum. This is used for userspace access only. The kernel
typically has its own communication methods.
To compile this driver as a module, choose M here: the
module will be called cros_ec_lpc.
config CROS_EC_LPC_MEC
bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant"
depends on CROS_EC_LPC
default n
tristate "ChromeOS Embedded Controller (LPC)"
depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
help
If you say Y here, a variant LPC protocol for the Microchip EC
will be used. Note that this variant is not backward compatible
with non-Microchip ECs.
If you say Y here, you get support for talking to the ChromeOS EC
over an LPC bus, including the LPC Microchip EC (MEC) variant.
This uses a simple byte-level protocol with a checksum. This is
used for userspace access only. The kernel typically has its own
communication methods.
If you have a ChromeOS Embedded Controller Microchip EC variant
choose Y here.
To compile this driver as a module, choose M here: the
module will be called cros_ec_lpcs.
config CROS_EC_PROTO
bool
drivers/platform/chrome/Makefile
+1 -2
View File
@@ -10,8 +10,7 @@ obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_CROS_EC_ISHTP) += cros_ec_ishtp.o
obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
cros_ec_lpcs-objs := cros_ec_lpc.o
cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_mec.o
obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o cros_ec_trace.o
obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o
drivers/platform/chrome/cros_ec_lpc.c
+84 -74
View File
@@ -31,7 +31,26 @@
/* True if ACPI device is present */
static bool cros_ec_lpc_acpi_device_found;
static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
/**
* struct lpc_driver_ops - LPC driver operations
* @read: Copy length bytes from EC address offset into buffer dest. Returns
* the 8-bit checksum of all bytes read.
* @write: Copy length bytes from buffer msg into EC address offset. Returns
* the 8-bit checksum of all bytes written.
*/
struct lpc_driver_ops {
u8 (*read)(unsigned int offset, unsigned int length, u8 *dest);
u8 (*write)(unsigned int offset, unsigned int length, const u8 *msg);
};
static struct lpc_driver_ops cros_ec_lpc_ops = { };
/*
* A generic instance of the read function of struct lpc_driver_ops, used for
* the LPC EC.
*/
static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
u8 *dest)
{
int sum = 0;
int i;
@@ -45,7 +64,12 @@ static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest)
return sum;
}
static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
/*
* A generic instance of the write function of struct lpc_driver_ops, used for
* the LPC EC.
*/
static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
const u8 *msg)
{
int sum = 0;
int i;
@@ -59,10 +83,12 @@ static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg)
return sum;
}
#ifdef CONFIG_CROS_EC_LPC_MEC
static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
u8 *dest)
/*
* An instance of the read function of struct lpc_driver_ops, used for the
* MEC variant of LPC EC.
*/
static u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length,
u8 *dest)
{
int in_range = cros_ec_lpc_mec_in_range(offset, length);
@@ -73,11 +99,15 @@ static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
cros_ec_lpc_io_bytes_mec(MEC_IO_READ,
offset - EC_HOST_CMD_REGION0,
length, dest) :
lpc_read_bytes(offset, length, dest);
cros_ec_lpc_read_bytes(offset, length, dest);
}
static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
u8 *msg)
/*
* An instance of the write function of struct lpc_driver_ops, used for the
* MEC variant of LPC EC.
*/
static u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length,
const u8 *msg)
{
int in_range = cros_ec_lpc_mec_in_range(offset, length);
@@ -87,45 +117,10 @@ static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
return in_range ?
cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE,
offset - EC_HOST_CMD_REGION0,
length, msg) :
lpc_write_bytes(offset, length, msg);
length, (u8 *)msg) :
cros_ec_lpc_write_bytes(offset, length, msg);
}
static void cros_ec_lpc_reg_init(void)
{
cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0,
EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE);
}
static void cros_ec_lpc_reg_destroy(void)
{
cros_ec_lpc_mec_destroy();
}
#else /* CONFIG_CROS_EC_LPC_MEC */
static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length,
u8 *dest)
{
return lpc_read_bytes(offset, length, dest);
}
static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length,
u8 *msg)
{
return lpc_write_bytes(offset, length, msg);
}
static void cros_ec_lpc_reg_init(void)
{
}
static void cros_ec_lpc_reg_destroy(void)
{
}
#endif /* CONFIG_CROS_EC_LPC_MEC */
static int ec_response_timed_out(void)
{
unsigned long one_second = jiffies + HZ;
@@ -133,7 +128,7 @@ static int ec_response_timed_out(void)
usleep_range(200, 300);
do {
if (!(cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_CMD, 1, &data) &
if (!(cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_CMD, 1, &data) &
EC_LPC_STATUS_BUSY_MASK))
return 0;
usleep_range(100, 200);
@@ -153,11 +148,11 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
ret = cros_ec_prepare_tx(ec, msg);
/* Write buffer */
cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout);
/* Here we go */
sum = EC_COMMAND_PROTOCOL_3;
cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);
if (ec_response_timed_out()) {
dev_warn(ec->dev, "EC responsed timed out\n");
@@ -166,15 +161,15 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
}
/* Check result */
msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
ret = cros_ec_check_result(ec, msg);
if (ret)
goto done;
/* Read back response */
dout = (u8 *)&response;
sum = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
dout);
sum = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET, sizeof(response),
dout);
msg->result = response.result;
@@ -187,9 +182,9 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec,
}
/* Read response and process checksum */
sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET +
sizeof(response), response.data_len,
msg->data);
sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET +
sizeof(response), response.data_len,
msg->data);
if (sum) {
dev_err(ec->dev,
@@ -229,17 +224,17 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
sum = msg->command + args.flags + args.command_version + args.data_size;
/* Copy data and update checksum */
sum += cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
msg->data);
sum += cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PARAM, msg->outsize,
msg->data);
/* Finalize checksum and write args */
args.checksum = sum;
cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
(u8 *)&args);
cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
(u8 *)&args);
/* Here we go */
sum = msg->command;
cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum);
cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum);
if (ec_response_timed_out()) {
dev_warn(ec->dev, "EC responsed timed out\n");
@@ -248,14 +243,13 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
}
/* Check result */
msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum);
msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum);
ret = cros_ec_check_result(ec, msg);
if (ret)
goto done;
/* Read back args */
cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args),
(u8 *)&args);
cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_ARGS, sizeof(args), (u8 *)&args);
if (args.data_size > msg->insize) {
dev_err(ec->dev,
@@ -269,8 +263,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec,
sum = msg->command + args.flags + args.command_version + args.data_size;
/* Read response and update checksum */
sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PARAM, args.data_size,
msg->data);
sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PARAM, args.data_size,
msg->data);
/* Verify checksum */
if (args.checksum != sum) {
@@ -300,13 +294,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset,
/* fixed length */
if (bytes) {
cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + offset, bytes, s);
return bytes;
}
/* string */
for (; i < EC_MEMMAP_SIZE; i++, s++) {
cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + i, 1, s);
cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + i, 1, s);
cnt++;
if (!*s)
break;
@@ -343,10 +337,25 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
return -EBUSY;
}
cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
/*
* Read the mapped ID twice, the first one is assuming the
* EC is a Microchip Embedded Controller (MEC) variant, if the
* protocol fails, fallback to the non MEC variant and try to
* read again the ID.
*/
cros_ec_lpc_ops.read = cros_ec_lpc_mec_read_bytes;
cros_ec_lpc_ops.write = cros_ec_lpc_mec_write_bytes;
cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf);
if (buf[0] != 'E' || buf[1] != 'C') {
dev_err(dev, "EC ID not detected\n");
return -ENODEV;
/* Re-assign read/write operations for the non MEC variant */
cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes;
cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes;
cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2,
buf);
if (buf[0] != 'E' || buf[1] != 'C') {
dev_err(dev, "EC ID not detected\n");
return -ENODEV;
}
}
if (!devm_request_region(dev, EC_HOST_CMD_REGION0,
@@ -541,13 +550,14 @@ static int __init cros_ec_lpc_init(void)
return -ENODEV;
}
cros_ec_lpc_reg_init();
cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0,
EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE);
/* Register the driver */
ret = platform_driver_register(&cros_ec_lpc_driver);
if (ret) {
pr_err(DRV_NAME ": can't register driver: %d\n", ret);
cros_ec_lpc_reg_destroy();
cros_ec_lpc_mec_destroy();
return ret;
}
@@ -557,7 +567,7 @@ static int __init cros_ec_lpc_init(void)
if (ret) {
pr_err(DRV_NAME ": can't register device: %d\n", ret);
platform_driver_unregister(&cros_ec_lpc_driver);
cros_ec_lpc_reg_destroy();
cros_ec_lpc_mec_destroy();
}
}
@@ -569,7 +579,7 @@ static void __exit cros_ec_lpc_exit(void)
if (!cros_ec_lpc_acpi_device_found)
platform_device_unregister(&cros_ec_lpc_device);
platform_driver_unregister(&cros_ec_lpc_driver);
cros_ec_lpc_reg_destroy();
cros_ec_lpc_mec_destroy();
}
module_init(cros_ec_lpc_init);
drivers/platform/chrome/wilco_ec/Kconfig
+1 -1
View File
@@ -1,6 +1,6 @@
config WILCO_EC
tristate "ChromeOS Wilco Embedded Controller"
depends on ACPI && X86 && CROS_EC_LPC && CROS_EC_LPC_MEC
depends on ACPI && X86 && CROS_EC_LPC
help
If you say Y here, you get support for talking to the ChromeOS
Wilco EC over an eSPI bus. This uses a simple byte-level protocol