* Wanted to avoid this, but permissive domain for impossible allowance,
PLUS now vendor HAL needing a system_ext app to set properties... meh.
* Allow jc_setup everything it needs to keep functionallity.
Change-Id: I6d4c949d8c955d9deff687dcf2bf4004e6c55c6b
There was no common kernel version flag when this was first added, now
there is. So change all references to use the common name.
Change-Id: I661d558df18e7055b2f83424c8987dfa8a83bb19
We will be changing AB to be the default, existing non-AB targets
need to explicitly set AB_OTA_UPDATER to false
Test: th
Change-Id: I86a76296937a6abab1b4495cd66a35144348aafd
* CTC's 2018 u-boot is more feature-complete for nx for now.
* We may revisit this later.
* This remediates issues with RAM carveout, clocks
(on erista models), mod chip issues (on mariko models),
and brings us almost in-line with L4t releases for nx.
Change-Id: I622cc67acb543b6ac54c8ee7a585d88e8066606c
* Reduce crashing and other issues resulting from density
disagreements. Also, AAPT should not be set as per cuttlefish
and newer Pixel devices.
Change-Id: Ibca27b4a77c84f2e57a534da10c278c7d0f0cf91
* As per cuttlefish etc. and cypress/nxp reference, set overlays for
MAC randomization support. Also enable
WIFI_HIDL_FEATURE_DUAL_INTERFACE and
WIFI_AVOID_IFACE_RESET_MAC_CHANGE as per cypress/nxp reference.
Change-Id: I5ad1539e400d9f79fce641faf284246743b08915
* I don't like this, but adding the required allowances for wifi_reset
results in few insurmountable neverallows.
Change-Id: I6fa3f0cfc62b253c0f30399a3d54b26a5426b855
As of Android 14 QPR2, galen Lineage release key fingerprints are
longer than 92 characters. This cause crashes on prop read. So,
hardcode a default that is shorter than 92 characters, so it can be
overridden later.
Change-Id: I47abbac4344252262c47b865fbda871559fcbf30
* Was tested on odin, modin, frig, and vali.
* Note: Due to the various sensors configurations across SKUs,
sensors will likely need additional labeling after test release.
Change-Id: I0f8b159acc0ae14e8e4c7d8ec29a0cb406d3bff8
* We are aren't launched with Android at all to, but
our partitions were origianlly set up to match
foster, as it is our closest hardware counterpart.
* Those partition sizes are now to small to fit
almost any form of GMS.
* The fact that users have to exploit their console,
run a custom first stage bootloader (Hekate), and
applications bootloader (u-boot) that we control
means that instead of retrofitting dynamic partitions
we can just _launch with them_ (as we have yet to ship
this device).
* Treat this device as if it has always had dynamic
partitions and let Hekate set us up to reflect that.
* Do away with SAR in the process, as Hekate can turn
that off.
* Nuke MDA, we don't support hardware backed encryption
anyway, so it doesn't make any sense to house.
Reference: https://github.com/CTCaer/hekate/pull/922
Change-Id: I1e5d8c309d08559873ea3c93ac5b4b6e197b528e
* Ensure users are always on the latest recovery image
Signed-off-by: Jarl-Penguin <jarlpenguin@outlook.com>
Change-Id: I033ac4442622b737639d678993daf602a89f9bac
* Sadly in PRODUCT_PROPERTY_OVERRIDES this
translates to 3 seperate props, example:
```
bluetooth.device.default_name=SHIELD
Android
TV
```
* The build system flips out when quotes are
used.
* Can't move whole device to *.prop because we
ifdef so many of these in tegra trees that it
would be disgusting.
Change-Id: I4c611c64652d28f65505382db7b3e08bc6f3fabf
* This allows infra to sign successfully, I hate it, but it builds,
boots, and works fine enough as a workaround.
* The underlying issue is that this flag causes avbtool args and location
to be set in `misc_info.txt` whereas before it was not.
Change-Id: I7bdf237ec30d692c7d8b5c626a6e761e2c1a2593
Lineage has switched to clang for kernel builds by default. The
nvidia 4.9 kernel does not build with clang.
Change-Id: Ie00632002a532a7a090d50c1951575c361244f7d
We are migrating from coreboot to an ATF loader
built into hekate-ipl. This will load sc7 bins etc. along
with ATF (bl31) and U-Boot (bl33), which will chainload
kernel (as is currently the case). This also migrates to new
R2P method/driver as the new loader/ATF will stash a
copy of the bootloader in RAM so we do not have to
load a hekate payload.
Change-Id: I11e4a1810829ab3ac4c8830fd03afd6054e40bad
* This is really only needed on devkits to allow
recovery flashed to `LNX` as opposed to `SOS` to
actually boot.
Change-Id: I238f356a0bee74ba2b6b60168d3b072ad490a796
* This is a tree for all Nintendo Switch variants:
`odin`, `modin`, `vali`, and `frig`.
* `ro.hardware` will be NX on all variants with
`ro.hardware.sku` being set per variant by u-boot.
Changes are as follows:
* At the moment the packaged DTB is only for `odin`, more to follow.
* Note: We may make `modin`, `vail`, and `frig` device-tree-overlays
on the `odin` base DTB to simplify things.
* Use darcy's thermal config as it's the most lenient, and is a same SoC STB.
* Unlike `icosa_sr` previously did, we will use the BCM HAL for BT over
BTLinux, as A2DP is tested and verified, no need to deviate.
Changes that will require follow-up commits to build out:
* Update init to reflect nx's needs - will need more work to support devices
other than `odin`.
Removals are as follows:
* Remove all non-nx device support files.
Co-authored-by: Thomas Makin <halorocker89@gmail.com>
Co-authored-by: Billy Laws <blaws05@gmail.com>
Co-authored-by: Aaron Kling <webgeek1234@gmail.com>
Co-authored-by: CTCaer <ctcaer@gmail.com>
Co-authored-by: John Smith <nemui3353@gmail.com>
Co-authored-by: langerhans <langerhans@users.noreply.github.com>
Co-authored-by: Nolen Johnson <johnsonnolen@gmail.com>
Change-Id: I9bab4d94c6e94a9c6e2a7cf04d16c4b76c0b6ac5
* Allows us to conditionally drop sif support when TV GMS is
included, which sif has no hope in fitting the full version
of.
Change-Id: I4ad8ac851fc12d53622a107fe9ed0acf6c102067
For simplicity, refactor TARGET_TEGRA_KERNEL to contain the decimal
point, and pass that to NV_BUILD_KERNEL_OPTIONS.
Change-Id: I08311ab07358cdd1d6e180dac8230f22f8de317c
The previous limit was set based on sif per the rel-30 BoardConfig,
which doesn't match the production sif partition layout. This is
updating the size to match the consumer hardware.
Change-Id: I0abb65140e2f52a1c57223fd95bd62db1a45a53a
tmakin
Aaron Kling
Nolen Johnson
Kelvin Zhang
LuK1337
Michael Bestas
Jarl-Penguin
Arne Coucheron
