The local (DEFER_TASKRUN) task_work list is an llist, which is LIFO
ordered, and hence __io_run_local_work() has to restore the right
running order with an O(n) llist_reverse_order() pass first. On top of
that, a batch that gets capped by max_events needs the leftover entries
parked on a separate ->retry_llist, as they can't be pushed back to the
shared list.
Switch it to the FIFO mpscq. Adds are wait-free instead of a cmpxchg
retry loop, entries are popped in queue order with no reversal pass,
capping a run simply leaves the remainder on the queue, and
->retry_llist goes away entirely. The consumer cursor, ->work_head,
lives with the rest of the ->uring_lock protected state rather than
next to the queue, so that popping entries doesn't dirty the producer
side cacheline.
For low amounts of task_work, this ends up being a bit more efficient
than the existing scheme. As an example of that, doing multishot
receives for 8 clients has the following task_work overhead:
1.02% sock-test [kernel.kallsyms] [k] io_req_local_work_add
0.88% sock-test [kernel.kallsyms] [k] __io_run_local_work_loop
0.60% sock-test [kernel.kallsyms] [k] llist_reverse_order
0.14% sock-test [kernel.kallsyms] [k] __io_run_local_work
2.64% at ~46Gb/sec
and after this change:
1.08% sock-test [kernel.kallsyms] [k] io_req_local_work_add
1.03% sock-test [kernel.kallsyms] [k] __io_run_local_work
2.11% at ~53Gb/sec
which has less overhead even though that test run was faster. For a case
of having 1024 clients on a single ring:
2.22% sock-test [kernel.kallsyms] [k] llist_reverse_order
0.84% sock-test [kernel.kallsyms] [k] __io_run_local_work_loop
0.42% sock-test [kernel.kallsyms] [k] io_req_local_work_add
0.02% sock-test [kernel.kallsyms] [k] __io_run_local_work
3.50% at ~24Gb/sec
we start to see the llist reversing taking a considerable amount of
time, and the total add+run task_work overhead is around 3.5%. After
the change:
0.90% sock-test [kernel.kallsyms] [k] __io_run_local_work
0.42% sock-test [kernel.kallsyms] [k] io_req_local_work_add
1.32% at ~26Gb/sec
most of that overhead is gone, and performance is better as well.
Caleb Sander Mateos <csander@purestorage.com> reports that it improves
the performance of a ublk 4kb workload by 4% [1], while testing v1 of
this patchset.
[1] https://lore.kernel.org/io-uring/CADUfDZr-MMYBaP-e+y9+xuRhuiunO2sBTUCmwZyd7AgT8sVtiQ@mail.gmail.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Local task_work is currently using llists for managing the work,
but that's a LIFO type of list. This means that running this task_work
needs to reverse the list first, to ensure fairness in running the
queued items.
Add a lockless FIFO queued, based on Dmitry Vyukov's intrusive MPSC
node-based queue algorithm, modified with an externally held consumer
cursor and conditional stub reinsertion. See comments in the header.
Producers are wait-free: a push is a single xchg() on the queue tail,
which serializes concurrent producers and defines the FIFO order, plus
a store linking the node to its predecessor. There are no cmpxchg retry
loops, and pushing is safe from any context, including hardirq.
The cost of linked list FIFO ordering is that a push publishes the node
in two steps - the xchg() makes it visible as the new tail before the
subsequent store links it into the chain that is reachable from the
head. A consumer hitting that window gets a NULL from mpscq_pop() while
mpscq_empty() reports false, and must retry later rather than treat the
queue as empty. The window is two instructions wide, but a producer can
get preempted inside it, so the consumer must not busy wait on it.
The consumer side supports a single consumer at a time, with callers
providing their own serialization. A stub node, which also defines the
empty state (tail == stub), allows the consumer to detach the final
node without racing against producer link stores: that node is only
handed out once the stub has been cmpxchg'ed back in as the tail. This
also guarantees that the previous tail returned by mpscq_push() cannot
get freed before that push has linked it, making it always valid for
comparisons.
The consumer cursor is deliberately not part of the queue struct - the
caller owns it and passes it to mpscq_pop(). This is done to separate
the consumer and producers cacheline. The cursor is written for every
popped entry, and keeping it on the same cacheline as ->tail would have
the consumer invalidating the line that producers need for every push.
Keeping it external lets the caller place it with its own consumer side
data instead.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Not required right now, as io_req_local_work_add() already calls this
helper with the RCU read lock held. But in preparation for that not
being the case, grab it locally.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit:
809b997a5c ("x86-64/arm64/powerpc: clean up and rename __copy_from_user_flushcache")
sanitized that any provided copy helper should separately validate
destination and source addresses, but we should also ensure that
anything that is retrieved from a buffer is validated upfront. For ring
provided buffers, always include an access_ok() when grabbing a new
buffer.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
So far IORING_RECVSEND_FIXED_BUF is only honoured on the SEND_ZC path,
even though the import wiring is already present for plain send and
completely absent for recv. Targets such as ublk's NBD backend want to
push/pull I/O data directly to/from an io_uring registered buffer over a
plain send/recv on a TCP socket.
Wire IORING_RECVSEND_FIXED_BUF into the plain IORING_OP_SEND and
IORING_OP_RECV paths:
- Accept the flag in SENDMSG_FLAGS / RECVMSG_FLAGS and, at prep time,
restrict it to the non-vectorized IORING_OP_SEND / IORING_OP_RECV
opcodes. It is mutually exclusive with buffer select, bundles and
(for recv) multishot, and records sqe->buf_index.
- For recv, set REQ_F_IMPORT_BUFFER in setup so the registered buffer
is imported lazily at issue time, mirroring the send path.
- In io_send()/io_recv(), import the registered buffer via
io_import_reg_buf() (ITER_SOURCE for send, ITER_DEST for recv) and
clear REQ_F_IMPORT_BUFFER. The resulting bvec iter persists in
async_data, so MSG_WAITALL partial send/recv retries resume at the
right offset.
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260608142511.659240-2-ming.lei@redhat.com
[axboe: combine flags checks]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both IORING_OP_CONNECT and IORING_OP_BIND reuse the msghdr object just
to store the sockaddr. Beyond allocating a much larger object than
needed, msghdr can also wrap an iovec, which will be recycled
unnecessarily. This uses the sockaddr directly.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://patch.msgid.link/20260602215327.1885109-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BPF programs should have no need in looking into struct io_ring_ctx, if
anything, most of such cases would be anti patterns like looking up ring
indices directly via the context.
Replace it with a new empty structure, which is just an alias to struct
io_ring_ctx. It'll create a new BTF type and fail verification if a BPF
program tries to access it (beyond the first byte). It'll also give more
flexibility for the future, and otherwise it can be made aligned with
io_ring_ctx as before with struct groups if ever needed or extended in a
different way.
Fixes: d0e437b76b ("io_uring/bpf-ops: implement loop_step with BPF struct_ops")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/5f6ca3649e9e0bae8667db4357e28dd00cd07901.1780394491.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 10dc959398 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time.
Fixes: 10dc959398 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop")
Cc: stable@vger.kernel.org
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260527172203.2043962-1-runyu.xiao@seu.edu.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_provide_buffers_prep() accepts nbufs up to MAX_BIDS_PER_BGID, but
io_add_buffers() stops when bl->nbufs reaches USHRT_MAX. This makes the
effective add limit one lower than the validated limit.
Use MAX_BIDS_PER_BGID in the add-side boundary check so validation and
execution use the same limit, and update the comment to refer to the
actual limit constant.
Signed-off-by: liyouhong <liyouhong@kylinos.cn>
Link: https://patch.msgid.link/20260528024936.3672659-1-dayou5941@163.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for an optional stats struct embedded in the refill queue
region, allowing userspace to monitor copy-fallback in real-time.
Userspace queries the stats struct size and alignment via
IO_URING_QUERY_ZCRX_NOTIF (notif_stats_size / notif_stats_alignment),
then provides a stats_offset in zcrx_notification_desc pointing to a
location within the refill queue region.
The kernel updates the stats counters in-place on every copy-fallback
event.
Signed-off-by: Clément Léger <cleger@meta.com>
[pavel: rename io_uring_zcrx_notif_stats]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/f6af5a21015efea4b733b9d77aba22c637788fe4.1779189667.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are currently no easy ways for the user to know if zcrx is out of
buffers and page pool fails to allocate. Add uapi for zcrx to communicate
it back.
It's implemented as a separate CQE, which for now is posted to the creator
ctx. To use it, on registration the user space needs to pass an instance
of struct zcrx_notification_desc, which tells the kernel the user_data
for resulting CQEs and which event types are expected / allowed.
When an allowed event happens, zcrx will post a CQE containing the
specified user_data, and lower bits of cqe->res will be set to the event
mask. Before the kernel could post another notification of the given
type, the user needs to acknowledge that it processed the previous one
by issuing IORING_REGISTER_ZCRX_CTRL with ZCRX_CTRL_ARM_NOTIFICATION.
The only notification type the patch implements is
ZCRX_NOTIF_NO_BUFFERS, but we'll need more of them in the future.
Co-developed-by: Vishwanath Seshagiri <vishs@meta.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Vishwanath Seshagiri <vishs@meta.com>
Link: https://patch.msgid.link/35cd307a03a43583838a2e151fc641c69abd786f.1779189667.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, zcrx_export() allocates a file descriptor and copies the
control structure to userspace before the backing file is created.
While the operation returns an error on failure, it is cleaner to
follow the standard kernel pattern of performing the copy_to_user()
and fd_install() only after all resource allocations (like the
anon_inode) have succeeded. This aligns the code with other
fd-publishing paths in the VFS.
Signed-off-by: Bertie Tryner <Bertie.Tryner@warwick.ac.uk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/1513a3f4ae7161692ca6e991b9f01278a6bc60e4.1779189667.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace trace_foo() with the new trace_call__foo() at sites already
guarded by trace_foo_enabled(), avoiding a redundant
static_branch_unlikely() re-evaluation inside the tracepoint.
trace_call__foo() calls the tracepoint callbacks directly without
utilizing the static branch again.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Assisted-by: Claude:claude-sonnet-4-6
Link: https://patch.msgid.link/20260515135903.2238731-1-vineeth@bitbyteword.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no real reason to have a limit, as the memory is accounted by
the lockmem limits anyway, if any exist. io_pin_pages() will still
restrict the maximum allowed limit per buffer, which is INT_MAX
number of pages. Cap it a bit lower than that, at 1TB for a 64-bit
system. Surely that should be enough for everyone. For now.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for supporting bigger individual buffers, bump the length
field to a full 8-bytes with size_t rather than an unsigned int.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track huge page references in a per-ring xarray to prevent double
accounting when the same huge page is used by multiple registered
buffers, either within the same ring or across cloned rings.
When registering buffers backed by huge pages, we need to account for
RLIMIT_MEMLOCK. But if multiple buffers share the same huge page (common
with cloned buffers), we must not account for the same page multiple
times. Similarly, we must only unaccount when the last reference to a
huge page is released.
Maintain a per-ring xarray (hpage_acct) that tracks reference counts for
each huge page. When registering a buffer, for each unique huge page,
increment its accounting reference count, and only account pages that
are newly added.
When unregistering a buffer, for each unique huge page, decrement its
refcount. Once the refcount hits zero, the page is unaccounted.
Note: any account is done against the ctx->user that was assigned when
the ring was setup. As before, if root is running the operation, no
accounting is done.
With these changes, any use of imu->acct_pages is also dead, hence kill
it from struct io_mapped_ubuf. This shrinks it from 56b to 48b on a
64-bit arch. Additionally, hpage_already_acct() is gone, which was an
O(M*M) scan over current + previous registrations.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This adds custom filtering for IORING_OP_CONNECT, where the target
family is always exposed, and (for AF_INET / AF_INET6) port and
address are exposed. port and v4_addr are in network byte order so
filter authors can compare against on-wire constants.
Skip population unless addr_len covers the populated fields, to
avoid leaking stale io_async_msghdr data on short connects.
Signed-off-by: Shouvik Kar <auxcorelabs@gmail.com>
Link: https://patch.msgid.link/20260512110242.26219-1-auxcorelabs@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull EDAC fix from Borislav Petkov:
- Fix a string leak in the versalnet driver
* tag 'edac_urgent_for_v7.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versalnet: Fix device name memory leak
The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE
handler in rxrpc_verify_response() copy the skb to a linear one before
calling into the security ops only when skb_cloned() is true. An skb
that is not cloned but still carries externally-owned paged fragments
(e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via
__ip_append_data, or a chained skb_has_frag_list()) falls through to
the in-place decryption path, which binds the frag pages directly into
the AEAD/skcipher SGL via skb_to_sgvec().
Extend the gate to also unshare when skb_has_frag_list() or
skb_has_shared_frag() is true. This catches the splice-loopback vector
and other externally-shared frag sources while preserving the
zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC
page_pool RX, GRO). The OOM/trace handling already in place is reused.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull clk driver fixes from Stephen Boyd:
- Mark the DDR bus clk critical in the SpaceMiT driver so that
boot doesn't fail
- Fix boot on Mobile EyeQ by creating the auxiliary device for
the ethernet PHY
- Plug an OF node leak in Rockchip rk808 clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rk808: fix OF node reference imbalance
MAINTAINERS: add myself as a reviewer for the clk subsystem
reset: eyeq: drop device_set_of_node_from_dev() done by parent
clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs
clk: eyeq: use the auxiliary device creation helper
clk: spacemit: k3: mark top_dclk as CLK_IS_CRITICAL
BPF_MAP_TYPE_ARENA accepts BPF_PSEUDO_MAP_VALUE offsets at exactly
the end of the arena mapping (off == arena_size). The boundary check
in arena_map_direct_value_addr() uses `>` instead of `>=`, which
incorrectly allows a one-past-end pointer to be accepted.
Change the condition to `>=` to correctly reject offsets that fall
outside the valid arena user_vm range.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Signed-off-by: Junyoung Jang <graypanda.inzag@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260426172505.1947915-1-graypanda.inzag@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XSKMAP entries are used as redirect targets for incoming XDP frames.
A TX-only AF_XDP socket lacks an Rx ring and cannot handle redirected
traffic, but xsk_map_update_elem() currently allows such sockets to
be inserted into the map.
Redirecting packets to such a socket on the veth generic-XDP path
causes a kernel crash in xsk_generic_rcv().
This became possible after xsk_is_setup_for_bpf_map() was removed from
the XSKMAP update path, which allowed bound TX-only sockets to be
inserted into the map.
Reject TX-only sockets during XSKMAP updates to avoid the crash.
They remain fully operational for pure Tx purposes outside XSKMAP.
Fixes: 968be23cea ("xsk: Fix possible segfault at xskmap entry insertion")
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Signed-off-by: Linpu Yu <linpu5433@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20260508144344.694-1-linpu5433@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Because subprog 0, the main subprog, is considered a global function,
we end up running the arg-tracking dataflow analysis twice on it. That
results in slightly longer verification but mostly in more verbose
verifier logs. This patch fixes it by keeping only the iteration over
global subprogs.
When running over all of Cilium's programs with BPF_LOG_LEVEL2, this
reduces verbosity by ~20% on average.
Fixes: bf0c571f7f ("bpf: introduce forward arg-tracking dataflow analysis")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/e4d7b53d4963ef520541a782f5fc8108a168877c.1778176504.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull fsverity fix from Eric Biggers:
"Fix a regression in overlayfs caused by an fsverity API change"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
ovl: fix verity lazy-load guard broken by fsverity_active() semantic change
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Add 'bindgen' target to make UML 32-bit builds work with GCC
- Disable two Clippy warnings ('collapsible_{if,match}')
'pin-init' crate:
- Fix unsoundness issue that created &'static references"
* tag 'rust-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: allow `clippy::collapsible_if` globally
rust: allow `clippy::collapsible_match` globally
rust: pin-init: fix incorrect accessor reference lifetime
rust: pin-init: internal: move alignment check to `make_field_check`
rust: arch: um: Fix building 32-bit UML with GCC
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for 7.1-rc3. They are:
- vme_user root device leak fix
- NULL dereference bugfix in the rtl8723bs driver
Both of these have been in linux-next all this week with no reported
issues"
* tag 'staging-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: os_dep: avoid NULL pointer dereference in rtw_cbuf_alloc
staging: vme_user: fix root device leak on init failure
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 7.1-rc3 to resolve some
reported issues, and a new device id. These are:
- usblp driver heap leak fixes
- ulpi driver memory leak fix
- typec driver fixes
- dwc3 driver fix
- omap dma driver fix
- new option driver device id addition
All of these have been in linux-next for over a week with no reported
issues"
* tag 'usb-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit Cinterion LE910Cx compositions
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usb: dwc3: Move GUID programming after PHY initialization
usb: typec: tcpm: fix debug accessory mode detection for sink ports
usb: typec: tcpm: reset internal port states on soft reset AMS
usb: ulpi: fix memory leak on ulpi_register() error paths
USB: omap_udc: DMA: Don't enable burst 4 mode
Pull i2c fixes from Wolfram Sang:
- sanitize more input parameters in the core (found by syzkaller)
- usual set of driver fixes (proper completion handling, applying
quirks, correct workqueue selection...)
- ID additions to simplify dependency handling
- new email address for Peter Rosin
* tag 'i2c-for-7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: smbus: reject oversized block transfers in the common path
MAINTAINERS: Update mail for Peter Rosin
i2c: stub: Reject I2C block transfers with invalid length
i2c: Compare the return value of gpiod_get_direction against GPIO_LINE_DIRECTION_OUT
i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl
i2c: acpi: Add ELAN0678 to i2c_acpi_force_100khz_device_ids
dt-bindings: i2c: apple,i2c: Add t8122 compatible
i2c: stm32f7: reinit_completion() per transfer not per msg
dt-bindings: i2c: amlogic: Add compatible for T7 SOC
i2c: testunit: Replace system_long_wq with system_dfl_long_wq
Pull powerpc fixes from Madhavan Srinivasan:
- Fix KASAN sanitization flag for core_$(BITS).o
- Fixes for handling offset values in pseries htmdump
- Fix interrupt mask in cpm1_gpiochip_add16()
- ps3/pasemi fixes to drop redundant result assignment
- Fixes in papr-hvpipe code path
- powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
Thanks to Aboorva Devarajan, Athira Rajeev, Christophe Leroy (CS GROUP),
Geert Uytterhoeven, Haren Myneni, Krzysztof Kozlowski, Mukesh Kumar
Chaurasiya (IBM), Nathan Chancellor, Ritesh Harjani (IBM), Shivani
Nittor, Sourabh Jain, Thomas Zimmermann, and Venkat Rao Bagalkote.
* tag 'powerpc-7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
powerpc/pasemi: Drop redundant res assignment
powerpc/ps3: Drop redundant result assignment
powerpc/vdso: Drop -DCC_USING_PATCHABLE_FUNCTION_ENTRY from 32-bit flags with clang
arch/powerpc: Drop CONFIG_FIRMWARE_EDID from defconfig files
powerpc/perf: Update check for PERF_SAMPLE_DATA_SRC marked events
powerpc/8xx: Fix interrupt mask in cpm1_gpiochip_add16()
powerpc/vmx: avoid KASAN instrumentation in enter_vmx_ops() for kexec
powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o
pseries/papr-hvpipe: Fix style and checkpatch issues in enable_hvpipe_IRQ()
pseries/papr-hvpipe: Refactor and simplify hvpipe_rtas_recv_msg()
pseries/papr-hvpipe: Kill task_struct pointer from struct hvpipe_source_info
pseries/papr-hvpipe: Simplify spin unlock usage in papr_hvpipe_handle_release()
pseries/papr-hvpipe: Fix the usage of copy_to_user()
pseries/papr-hvpipe: Fix & simplify error handling in papr_hvpipe_init()
pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle()
pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace
pseries/papr-hvpipe: Fix race with interrupt handler
powerpc/pseries/htmdump: Add memory configuration dump support to htmdump module
powerpc/pseries/htmdump: Fix the offset value used in htm status dump
powerpc/pseries/htmdump: Fix the offset value used in processor configuration dump
...
Pull x86 fixes from Ingo Molnar:
- Fix memory map enumeration bug in the Xen e820 parsing code (Juergen
Gross)
- Re-enable e820 BIOS fallback if e820 table is empty (David Gow)
* tag 'x86-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/e820: Re-enable BIOS fallback if e820 table is empty
x86/xen: Fix a potential problem in xen_e820_resolve_conflicts()
Pull timer fix from Ingo Molnar:
"Fix CPU hotplug activation race in the timer migration code, by
Frederic Weisbecker"
* tag 'timers-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix another hotplug activation race
Pull scheduler fixes from Ingo Molnar:
- Fix spurious failures in rseq self-tests (Mark Brown)
- Fix rseq rseq::cpu_id_start ABI regression due to TCMalloc's creative
use of the supposedly read-only field
The fix is to introduce a new ABI variant based on a new (larger)
rseq area registration size, to keep the TCMalloc use of rseq
backwards compatible on new kernels (Thomas Gleixner)
- Fix wakeup_preempt_fair() for not waking up task (Vincent Guittot)
- Fix s64 mult overflow in vruntime_eligible() (Zhan Xusheng)
* tag 'sched-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix wakeup_preempt_fair() for not waking up task
sched/fair: Fix overflow in vruntime_eligible()
selftests/rseq: Expand for optimized RSEQ ABI v2
rseq: Reenable performance optimizations conditionally
rseq: Implement read only ABI enforcement for optimized RSEQ V2 mode
selftests/rseq: Validate legacy behavior
selftests/rseq: Make registration flexible for legacy and optimized mode
selftests/rseq: Skip tests if time slice extensions are not available
rseq: Revert to historical performance killing behaviour
rseq: Don't advertise time slice extensions if disabled
rseq: Protect rseq_reset() against interrupts
rseq: Set rseq::cpu_id_start to 0 on unregistration
selftests/rseq: Don't run tests with runner scripts outside of the scripts
Pull perf events fixes from Ingo Molnar:
- Fix deadlock in the perf_mmap() failure path (Peter Zijlstra)
- Intel ACR (Auto Counter Reload) fixes (Dapeng Mi):
- Fix validation and configuration of ACR masks
- Fix ACR rescheduling bug causing stale masks
- Disable the PMI on ACR-enabled hardware
- Enable ACR on Panther Cover uarch too
* tag 'perf-urgent-2026-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Enable auto counter reload for DMR
perf/x86/intel: Disable PMI for self-reloaded ACR events
perf/x86/intel: Always reprogram ACR events to prevent stale masks
perf/x86/intel: Improve validation and configuration of ACR masks
perf/core: Fix deadlock in perf_mmap() failure path
Pull arm64 fix from Catalin Marinas:
- ptrace(PTRACE_SETREGSET) fix to zero the target's fpsimd_state rather
than the tracer's
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/fpsimd: ptrace: zero target's fpsimd_state, not the tracer's
Pull PCI fixes from Bjorn Helgaas:
- Don't fallback to bus reset after failed slot reset; a bus reset
isn't safe if the .reset_slot() callback is implemented (Keith Busch)
- Update saved_config_space upon resource assignment to fix passthrough
regressions when x86 pcibios_assign_resources() updates BARs (Lukas
Wunner)
- Initialize a temporary pci_dev->dev in sysfs 'new_id' attribute to
fix a lockdep regression after driver_override was moved from PCI to
device core (Samiullah Khawaja)
- Update MAINTAINERS email addresses (Marek Vasut, Hans Zhang)
- Add MAINTAINERS reviewer for PCIe Cadence IP (Aksh Garg)
* tag 'pci-v7.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Aksh Garg as PCIe CADENCE reviewer
MAINTAINERS: Update Hans Zhang email for PCIe CIX Sky1
MAINTAINERS: Update Marek Vasut email for PCIe R-Car
PCI: Initialize temporary device in new_id_store()
PCI: Update saved_config_space upon resource assignment
PCI: Don't fallback to bus reset after failed slot reset
Jens Axboe
Ming Lei
Gabriel Krisman Bertazi
Pavel Begunkov
Runyu Xiao
liyouhong
Clément Léger
Bertie Tryner
Vineeth Pillai
Shouvik Kar
Yi Xie
Linus Torvalds
Hyunwoo Kim
Junyoung Jang
Linpu Yu
Paul Chaignon
Aksh Garg
Hans Zhang
Marek Vasut