Replace GFP_ATOMIC with GFP_KERNEL for dma_alloc_coherent() calls. This
change improves memory allocation reliability during firmware loading,
particularly during system resume when memory pressure is high. Because
of using GFP_KERNEL, reclaim can happen which can reduce the probability
of failure.
Fixes memory allocation failures observed during system resume with
fragmented memory conditions.
snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP firmware after resume -12
Fixes: 145d7e5ae8 ("ASoC: SOF: amd: add option to use sram for data bin loading")
Fixes: 7e51a9e38a ("ASoC: SOF: amd: Add fw loader and renoir dsp ops to load firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://patch.msgid.link/20250725190254.1081184-1-usama.anjum@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware requests 2 segments at first. The first segment is of 6799360
whose allocation fails due to dma remapping not available. The success
is returned to firmware. Then firmware asks for 22 smaller segments
instead of 2 big ones. Those get allocated successfully. At suspend/
hibernation time, these segments aren't freed as they will be reused
by firmware after resuming.
After resuming, the firmware asks for the 2 segments again with the
first segment of 6799360 size. Since chunk->vaddr is not NULL, the
type and size are compared with the previous type and size to know if
it can be reused or not. Unfortunately, it is detected that it cannot
be reused and this first smaller segment is freed. Then we continue to
allocate 6799360 size memory which fails and ath11k_qmi_free_target_mem_chunk()
is called which frees the second smaller segment as well. Later success
is returned to firmware which asks for 22 smaller segments again. But
as we had freed 2 segments already, we'll allocate the first 2 new
smaller segments again and reuse the remaining 20. Hence 20 small
segments are being reused instead of 22.
Add skip logic when vaddr is set, but size/type don't match. Use the
same skip and success logic as used when dma_alloc_coherent() fails.
By skipping, the possibility of resume failure due to kernel failing to
allocate memory for QMI can be avoided.
kernel: ath11k_pci 0000:03:00.0: failed to allocate dma memory for qmi (524288 B type 1)
ath11k_pci 0000:03:00.0: failed to allocate qmi target memory: -22
Tested-on: WCN6855 WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.6
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250428080242.466901-1-usama.anjum@collabora.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Patch series "selftest/mm: Remove warnings found by adding compiler flags".
Recently, I reviewed a patch on the mm/kselftest mailing list about a test
which had obvious type mismatch fix in it. It was strange why that wasn't
caught during development and when patch was accepted. This led me to
discover that those extra compiler options to catch these warnings aren't
being used. When I added them, I found tens of warnings in just mm suite.
In this series, I'm fixing those warnings in a few files. More fixes will
be sent later.
This patch (of 4):
Remove cost from the return type as it is ignored anyways and generates
the warning:
warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
Link: https://lkml.kernel.org/r/20241209185624.2245158-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20241209185624.2245158-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test should be skipped if initial conditions aren't fulfilled in the
start instead of failing and outputting non-compliant TAP logs. This kind
of failure pollutes the results. The initial conditions are:
- The test should only execute if /tmp file can be allocated.
- The test should only execute if huge pages are free.
Before:
TAP version 13
1..4
Bail out! Error opening file
: Read-only file system (30)
# Planned tests != run tests (4 != 0)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
TAP version 13
1..0 # SKIP Unable to allocate file: Read-only file system
Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes: 3a103b5315 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()")
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
grep -rnIF "#define __NR_userfaultfd"
tools/include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
arch/x86/include/generated/uapi/asm/unistd_32.h:374:#define
__NR_userfaultfd 374
arch/x86/include/generated/uapi/asm/unistd_64.h:327:#define
__NR_userfaultfd 323
arch/x86/include/generated/uapi/asm/unistd_x32.h:282:#define
__NR_userfaultfd (__X32_SYSCALL_BIT + 323)
arch/arm/include/generated/uapi/asm/unistd-eabi.h:347:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
arch/arm/include/generated/uapi/asm/unistd-oabi.h:359:#define
__NR_userfaultfd (__NR_SYSCALL_BASE + 388)
include/uapi/asm-generic/unistd.h:681:#define __NR_userfaultfd 282
The number is dependent on the architecture. The above data shows that:
x86 374
x86_64 323
The value of __NR_userfaultfd was changed to 282 when asm-generic/unistd.h
was included. It makes the test to fail every time as the correct number
of this syscall on x86_64 is 323. Fix the header to asm/unistd.h.
Link: https://lkml.kernel.org/r/20240923053836.3270393-1-usama.anjum@collabora.com
Fixes: a5c6bc5900 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52d ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The strscpy test loads test_strscpy module for testing. But test_strscpy
was converted to Kunit (see fixes). Hence remove strscpy.
Fixes: 41eefc46a3 ("string: Convert strscpy() self-test to KUnit")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The user test suite has only one test, test_user_copy which loads
test_user_copy module for testing. But test_user_copy module has already
been converted to kunit (see fixes). Hence remove the entire suite.
Fixes: cf6219ee88 ("usercopy: Convert test_user_copy to KUnit test")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The python unittest module writes all its output to stderr, even when
the run is clean. Redirect its output logs to stdout.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use fisttps instead of fisttp to specify correctly that the output
variable is of size short.
test_FISTTP.c:28:3: error: ambiguous instructions require an explicit suffix (could be 'fisttps', or 'fisttpl')
28 | " fisttp res16""\n"
| ^
<inline asm>:3:2: note: instantiated into assembly here
3 | fisttp res16
| ^
...followed by three more cases of the same warning for other lines.
[jh: removed a bit of duplication from the warnings report, above, and
fixed a typo in the title]
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Although "TAP" word is being used already in documentation, but it hasn't
been defined in informative way for developers that how to write TAP
conformant tests and what are the benefits. Write a short brief about it.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This test outputs lots of information. Let's conform the core part of
the test to TAP and leave the information printing messages for now.
Include ktap_helpers.sh to print conformed logs. Use KSFT_* macros to
return the correct exit code for the kselftest framework and CIs to
understand the exit status.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let the compilers (clang) know that this function would just call
exit() and would never return. It is needed to avoid false positive
static analysis errors. All similar functions calling exit()
unconditionally have been marked as __noreturn.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use ksft_exit_fail_perror() to print the value of errno and its string
form. This is the first user of the ksft_exit_fail_perror() and proves
the usefulness of this API.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a version of ksft_exit_fail_msg() which prints the errno and its
string form with ease. There is no benefit of exit message without
errno. Whenever some error occurs, instead of printing errno manually,
this function would be very helpful. In the next TAP ports or new tests,
this function will be used instead of ksft_exit_fail_msg() as it prints
errno.
Resolved merge conflict found in next between the following commits:
f7d5bcd35d ("selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn")
f07041728422 ("selftests: add ksft_exit_fail_perror()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The comment on top of the file is used by many developers to glance over
all the available functions. Add the recently added ksft_perror() to it.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Improve the TAP messages as well.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Add more logic code to skip the tests if particular configuration isn't
available to make sure that either we skip each test or mark it pass/fail.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are multiple #ifdef blocks inside functions where they return just
0 if #ifdef is false. This makes number of tests counting difficult.
Move those functions inside one #ifdef block and move all of them
together. This is preparatory patch for next patch to convert this into
TAP format. So in this patch, we are just moving functions around
without any changes.
With and without this patch, the output of this patch is same.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash.
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The save/restore of nr_hugepages was added to the test itself by using the
atexit() functionality. But it is broken as parent exits after creating
child. Hence calling the atexit() function early. That's not it. The
child exits after creating its child and so on.
The parent cannot wait to get the termination status for its children as
it'll keep on holding the resources until the new pkey allocation fails.
It is impossible to wait for exits of all the grand and great grand
children. Hence the restoring of nr_hugepages value from parent is wrong.
Let's save/restore the nr_hugepages settings in the launch script
instead of doing it in the test.
Link: https://lkml.kernel.org/r/20240419115027.3848958-1-usama.anjum@collabora.com
Fixes: c52eb6db7b ("selftests: mm: restore settings from only parent process")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reported-by: Joey Gouly <joey.gouly@arm.com>
Closes: https://lore.kernel.org/all/20240418125250.GA2941398@e124191.cambridge.arm.com
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix the warnings by initializing and marking the variable as unused.
I've caught the warnings by using clang.
split_huge_page_test.c:303:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable]
303 | int dummy;
| ^
split_huge_page_test.c:343:3: warning: variable 'dummy' is uninitialized when used here [-Wuninitialized]
343 | dummy += *(*addr + i);
| ^~~~~
split_huge_page_test.c:303:11: note: initialize the variable 'dummy' to silence this warning
303 | int dummy;
| ^
| = 0
2 warnings generated.
Link: https://lkml.kernel.org/r/20240416162658.3353622-1-usama.anjum@collabora.com
Fixes: fc4d182316 ("mm: huge_memory: enable debugfs to split huge pages to any order")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The config fragment enlists all the config options needed for the test.
This config is merged into the kernel's config on which this test is
run.
Fixed whitespace errors during commit:
Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Skip instead of failing when prerequisite conditions aren't fulfilled,
such as invalid xstate values etc.
Make the tests show as 'SKIP' when run:
make -C tools/testing/selftests/ TARGETS=x86 run_tests
...
# timeout set to 45
# selftests: x86: amx_64
# # xstate cpuid: invalid tile data size/offset: 0/0
ok 42 selftests: x86: amx_64 # SKIP
# timeout set to 45
# selftests: x86: lam_64
# # Unsupported LAM feature!
ok 43 selftests: x86: lam_64 # SKIP
...
In the AMX test, Move away from check_cpuid_xsave() and start using
arch_prctl() to find out if AMX support is present or not. In the
kernels where AMX isn't present, arch_prctl() returns -EINVAL, hence it is
backward compatible.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/r/20240327111720.3509180-1-usama.anjum@collabora.com
Patch series "selftests/mm: Improve run_vmtests.sh", v3.
In this series, I'm trying to add 3 missing tests to vm_runtests.sh which
is used to run all the tests in mm suite. These tests weren't running by
CIs. While enabling them and through review feedback, I've fixed some
problems in tests as well. I've found more flakiness in more tests which
I'll be fixing with future patches.
hugetlb-read-hwpoison test is being added where it can only run with newly
added "-d" (destructive) flag only. Not sure why it is failing again. So
once it become stable, we can think of moving it to default set of tests
if it doesn't have any side-effect to them.
This patch (of 5):
Do not unmount the cgroup if it wasn't mounted by the test. The earlier
patch had fixed this for charge_reserved_hugetlb, but not for this test.
I'm adding fixes tag to that earlier patch.
Link: https://lkml.kernel.org/r/20240125154608.720072-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20240125154608.720072-2-usama.anjum@collabora.com
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Conform the layout, informational and status messages to TAP. No
functional change is intended other than the layout of output messages.
Also remove unneeded logging which isn't enabled. Skip a hugepage size if
it has less free pages to avoid unnecessary failures. For examples, some
systems may not have 1GB hugepage free. So skip 1GB for testing in this
test instead of failing the entire test.
Link: https://lkml.kernel.org/r/20240202113119.2047740-11-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706 ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fix build warnings:
pagemap_ioctl.c:1154:38: warning: format `%s' expects a matching `char *' argument [-Wformat=]
pagemap_ioctl.c:1162:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1192:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1600:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1628:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
Link: https://lkml.kernel.org/r/20231103182343.2874015-2-usama.anjum@collabora.com
Fixes: 46fd75d4a3 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PAGEMAP_SCAN IOCTL on the pagemap file can be used to get or optionally
clear the info about page table entries. The following operations are
supported in this IOCTL:
- Scan the address range and get the memory ranges matching the provided
criteria. This is performed when the output buffer is specified.
- Write-protect the pages. The PM_SCAN_WP_MATCHING is used to write-protect
the pages of interest. The PM_SCAN_CHECK_WPASYNC aborts the operation if
non-Async Write Protected pages are found. The ``PM_SCAN_WP_MATCHING``
can be used with or without PM_SCAN_CHECK_WPASYNC.
- Both of those operations can be combined into one atomic operation where
we can get and write protect the pages as well.
Following flags about pages are currently supported:
- PAGE_IS_WPALLOWED - Page has async-write-protection enabled
- PAGE_IS_WRITTEN - Page has been written to from the time it was write protected
- PAGE_IS_FILE - Page is file backed
- PAGE_IS_PRESENT - Page is present in the memory
- PAGE_IS_SWAPPED - Page is in swapped
- PAGE_IS_PFNZERO - Page has zero PFN
- PAGE_IS_HUGE - Page is THP or Hugetlb backed
This IOCTL can be extended to get information about more PTE bits. The
entire address range passed by user [start, end) is scanned until either
the user provided buffer is full or max_pages have been found.
[akpm@linux-foundation.org: update it for "mm: hugetlb: add huge page size param to set_huge_pte_at()"]
[akpm@linux-foundation.org: fix CONFIG_HUGETLB_PAGE=n warning]
[arnd@arndb.de: hide unused pagemap_scan_backout_range() function]
Link: https://lkml.kernel.org/r/20230927060257.2975412-1-arnd@kernel.org
[sfr@canb.auug.org.au: fix "fs/proc/task_mmu: hide unused pagemap_scan_backout_range() function"]
Link: https://lkml.kernel.org/r/20230928092223.0625c6bf@canb.auug.org.au
Link: https://lkml.kernel.org/r/20230821141518.870589-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The smp_processor_id() shouldn't be called from preemptible code.
Instead use get_cpu() and put_cpu() which disables preemption in
addition to getting the processor id. Enable preemption back after
calling schedule_work() to make sure that the work gets scheduled on all
cores other than the current core. We want to avoid a scenario where
current core's stack trace is printed multiple times and one core's
stack trace isn't printed because of scheduling of current task.
This fixes the following bug:
[ 119.143590] sysrq: Show backtrace of all active CPUs
[ 119.143902] BUG: using smp_processor_id() in preemptible [00000000] code: bash/873
[ 119.144586] caller is debug_smp_processor_id+0x20/0x30
[ 119.144827] CPU: 6 PID: 873 Comm: bash Not tainted 5.10.124-dirty #3
[ 119.144861] Hardware name: QEMU QEMU Virtual Machine, BIOS 2023.05-1 07/22/2023
[ 119.145053] Call trace:
[ 119.145093] dump_backtrace+0x0/0x1a0
[ 119.145122] show_stack+0x18/0x70
[ 119.145141] dump_stack+0xc4/0x11c
[ 119.145159] check_preemption_disabled+0x100/0x110
[ 119.145175] debug_smp_processor_id+0x20/0x30
[ 119.145195] sysrq_handle_showallcpus+0x20/0xc0
[ 119.145211] __handle_sysrq+0x8c/0x1a0
[ 119.145227] write_sysrq_trigger+0x94/0x12c
[ 119.145247] proc_reg_write+0xa8/0xe4
[ 119.145266] vfs_write+0xec/0x280
[ 119.145282] ksys_write+0x6c/0x100
[ 119.145298] __arm64_sys_write+0x20/0x30
[ 119.145315] el0_svc_common.constprop.0+0x78/0x1e4
[ 119.145332] do_el0_svc+0x24/0x8c
[ 119.145348] el0_svc+0x10/0x20
[ 119.145364] el0_sync_handler+0x134/0x140
[ 119.145381] el0_sync+0x180/0x1c0
Cc: jirislaby@kernel.org
Cc: stable@vger.kernel.org
Fixes: 47cab6a722 ("debug lockups: Improve lockup detection, fix generic arch fallback")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20231009162021.3607632-1-usama.anjum@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove duplicate defines which are already defined in kernel headers and
re-definition isn't required.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove duplicate defines which are already included in kernel headers.
MAX_PID_NS_LEVEL macro is used inside kernel only. It isn't exposed to
userspace. So it is never defined in test application. Remove #ifndef in
this case.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These duplicate defines should automatically be picked up from kernel
headers. Use KHDR_INCLUDES to add kernel header files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
mwriteprotect_range() errors out if [start, end) doesn't fall in one VMA.
We are facing a use case where multiple VMAs are present in one range of
interest. For example, the following pseudocode reproduces the error
which we are trying to fix:
- Allocate memory of size 16 pages with PROT_NONE with mmap
- Register userfaultfd
- Change protection of the first half (1 to 8 pages) of memory to
PROT_READ | PROT_WRITE. This breaks the memory area in two VMAs.
- Now UFFDIO_WRITEPROTECT_MODE_WP on the whole memory of 16 pages errors
out.
This is a simple use case where user may or may not know if the memory
area has been divided into multiple VMAs.
We need an implementation which doesn't disrupt the already present users.
So keeping things simple, stop going over all the VMAs if any one of the
VMA hasn't been registered in WP mode. While at it, remove the un-needed
error check as well.
[akpm@linux-foundation.org: s/VM_WARN_ON_ONCE/VM_WARN_ONCE/ to fix build]
Link: https://lkml.kernel.org/r/20230217105558.832710-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reported-by: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
make versioncheck reports the following:
./drivers/soc/tegra/cbb/tegra-cbb.c: 19 linux/version.h not needed.
./drivers/soc/tegra/cbb/tegra194-cbb.c: 26 linux/version.h not needed.
./drivers/soc/tegra/cbb/tegra234-cbb.c: 27 linux/version.h not needed.
So remove linux/version.h from these files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
make versioncheck reports the following:
./drivers/net/ethernet/qlogic/qede/qede.h: 10 linux/version.h not needed.
./drivers/net/ethernet/qlogic/qede/qede_ethtool.c: 7 linux/version.h not needed.
So remove linux/version.h from both of these files. Also remove
linux/compiler.h while at it as it is also not being used.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230309225206.2473644-1-usama.anjum@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
