Merge tag 'riscv-soc-fixes-for-v6.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into HEAD

RISC-V soc fixes for v6.12-rc6

StarFive:
Two minor dts fixes, one setting the correct eth phy delay parameters
and one disabling unused nodes that caused warnings at probe time.

Firmware:
Fix the poll_complete() implementation in the auto-update driver so that
it behaves as the framework expects.

Misc:
Update the maintainer pattern for my dts entry, so that it covers
the specific platforms listed , rather than including all riscv
platforms with the list platforms excluded.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-soc-fixes-for-v6.12-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  MAINTAINERS: invert Misc RISC-V SoC Support's pattern
  riscv: dts: starfive: Update ethernet phy0 delay parameter values for Star64
  riscv: dts: starfive: disable unused csi/camss nodes
  firmware: microchip: auto-update: fix poll_complete() to not report spurious timeout errors

Link: https://lore.kernel.org/r/20241031-colossal-cassette-617817c9bec3@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -19786,12 +19786,10 @@ L:	linux-riscv@lists.infradead.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-riscv/list/
 T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
-F:	Documentation/devicetree/bindings/riscv/
-F:	arch/riscv/boot/dts/
-X:	arch/riscv/boot/dts/allwinner/
-X:	arch/riscv/boot/dts/renesas/
-X:	arch/riscv/boot/dts/sophgo/
-X:	arch/riscv/boot/dts/thead/
+F:	arch/riscv/boot/dts/canaan/
+F:	arch/riscv/boot/dts/microchip/
+F:	arch/riscv/boot/dts/sifive/
+F:	arch/riscv/boot/dts/starfive/
 
 RISC-V PMU DRIVERS
 M:	Atish Patra <atishp@atishpatra.org>

arch/riscv/boot/dts/starfive/jh7110-common.dtsi

@@ -128,7 +128,6 @@
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
 			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
 	assigned-clock-rates = <49500000>, <198000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;
@@ -151,7 +150,6 @@
 &csi2rx {
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
 	assigned-clock-rates = <297000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;

arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts

@@ -44,8 +44,7 @@
 };
 
 &phy0 {
-	rx-internal-delay-ps = <1900>;
-	tx-internal-delay-ps = <1500>;
+	rx-internal-delay-ps = <1500>;
 	motorcomm,rx-clk-drv-microamp = <2910>;
 	motorcomm,rx-data-drv-microamp = <2910>;
 	motorcomm,tx-clk-adj-enabled;

drivers/firmware/microchip/mpfs-auto-update.c

@@ -76,14 +76,11 @@
 #define AUTO_UPDATE_INFO_SIZE		SZ_1M
 #define AUTO_UPDATE_BITSTREAM_BASE	(AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_INFO_SIZE)
 
-#define AUTO_UPDATE_TIMEOUT_MS		60000
-
 struct mpfs_auto_update_priv {
 	struct mpfs_sys_controller *sys_controller;
 	struct device *dev;
 	struct mtd_info *flash;
 	struct fw_upload *fw_uploader;
-	struct completion programming_complete;
 	size_t size_per_bitstream;
 	bool cancel_request;
 };
@@ -156,19 +153,6 @@ static void mpfs_auto_update_cancel(struct fw_upload *fw_uploader)
 
 static enum fw_upload_err mpfs_auto_update_poll_complete(struct fw_upload *fw_uploader)
 {
-	struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
-	int ret;
-
-	/*
-	 * There is no meaningful way to get the status of the programming while
-	 * it is in progress, so attempting anything other than waiting for it
-	 * to complete would be misplaced.
-	 */
-	ret = wait_for_completion_timeout(&priv->programming_complete,
-					  msecs_to_jiffies(AUTO_UPDATE_TIMEOUT_MS));
-	if (!ret)
-		return FW_UPLOAD_ERR_TIMEOUT;
-
 	return FW_UPLOAD_ERR_NONE;
 }
 
@@ -349,33 +333,23 @@ static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader,
 						 u32 offset, u32 size, u32 *written)
 {
 	struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
-	enum fw_upload_err err = FW_UPLOAD_ERR_NONE;
 	int ret;
 
-	reinit_completion(&priv->programming_complete);
-
 	ret = mpfs_auto_update_write_bitstream(fw_uploader, data, offset, size, written);
-	if (ret) {
-		err = FW_UPLOAD_ERR_RW_ERROR;
-		goto out;
-	}
+	if (ret)
+		return FW_UPLOAD_ERR_RW_ERROR;
 
-	if (priv->cancel_request) {
-		err = FW_UPLOAD_ERR_CANCELED;
-		goto out;
-	}
+	if (priv->cancel_request)
+		return FW_UPLOAD_ERR_CANCELED;
 
 	if (mpfs_auto_update_is_bitstream_info(data, size))
-		goto out;
+		return FW_UPLOAD_ERR_NONE;
 
 	ret = mpfs_auto_update_verify_image(fw_uploader);
 	if (ret)
-		err = FW_UPLOAD_ERR_FW_INVALID;
+		return FW_UPLOAD_ERR_FW_INVALID;
 
-out:
-	complete(&priv->programming_complete);
-
-	return err;
+	return FW_UPLOAD_ERR_NONE;
 }
 
 static const struct fw_upload_ops mpfs_auto_update_ops = {
@@ -461,8 +435,6 @@ static int mpfs_auto_update_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, ret,
 				     "The current bitstream does not support auto-update\n");
 
-	init_completion(&priv->programming_complete);
-
 	fw_uploader = firmware_upload_register(THIS_MODULE, dev, "mpfs-auto-update",
 					       &mpfs_auto_update_ops, priv);
 	if (IS_ERR(fw_uploader))