Merge tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - fix a probe failure for Tegra241 GPIO controller in gpio-tegra186

 - revert changes that caused a regression in the sysfs user-space
   interface

 - correct the debounce time conversion in GPIO ACPI

 - statify a struct in gpio-sim and fix a typo

 - update registers in correct order (hardware quirk) in gpio-ts4900

* tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: fix a typo
  gpio: ts4900: Do not set DAT and OE together
  gpio: sim: Declare gpio_sim_hog_config_item_ops static
  gpiolib: acpi: Convert ACPI value of debounce to microseconds
  gpio: Revert regression in sysfs-gpio (gpiolib.c)
  gpio: tegra186: Add IRQ per bank for Tegra241

drivers/gpio/gpio-sim.c

@@ -547,7 +547,7 @@ struct gpio_sim_bank {
 	 *
 	 * So we need to store the pointer to the parent struct here. We can
 	 * dereference it anywhere we need with no checks and no locking as
-	 * it's guaranteed to survive the childred and protected by configfs
+	 * it's guaranteed to survive the children and protected by configfs
 	 * locks.
 	 *
 	 * Same for other structures.
@@ -1322,7 +1322,7 @@ static void gpio_sim_hog_config_item_release(struct config_item *item)
 	kfree(hog);
 }
 
-struct configfs_item_operations gpio_sim_hog_config_item_ops = {
+static struct configfs_item_operations gpio_sim_hog_config_item_ops = {
 	.release	= gpio_sim_hog_config_item_release,
 };
 

drivers/gpio/gpio-tegra186.c

@@ -1075,6 +1075,7 @@ static const struct tegra_gpio_soc tegra241_main_soc = {
 	.ports = tegra241_main_ports,
 	.name = "tegra241-gpio",
 	.instance = 0,
+	.num_irqs_per_bank = 8,
 };
 
 #define TEGRA241_AON_GPIO_PORT(_name, _bank, _port, _pins)	\
@@ -1095,6 +1096,7 @@ static const struct tegra_gpio_soc tegra241_aon_soc = {
 	.ports = tegra241_aon_ports,
 	.name = "tegra241-gpio-aon",
 	.instance = 1,
+	.num_irqs_per_bank = 8,
 };
 
 static const struct of_device_id tegra186_gpio_of_match[] = {

drivers/gpio/gpio-ts4900.c

@@ -1,7 +1,7 @@
 /*
  * Digital I/O driver for Technologic Systems I2C FPGA Core
  *
- * Copyright (C) 2015 Technologic Systems
+ * Copyright (C) 2015, 2018 Technologic Systems
  * Copyright (C) 2016 Savoir-Faire Linux
  *
  * This program is free software; you can redistribute it and/or
@@ -55,19 +55,33 @@ static int ts4900_gpio_direction_input(struct gpio_chip *chip,
 {
 	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
 
-	/*
-	 * This will clear the output enable bit, the other bits are
-	 * dontcare when this is cleared
+	/* Only clear the OE bit here, requires a RMW. Prevents potential issue
+	 * with OE and data getting to the physical pin at different times.
 	 */
-	return regmap_write(priv->regmap, offset, 0);
+	return regmap_update_bits(priv->regmap, offset, TS4900_GPIO_OE, 0);
 }
 
 static int ts4900_gpio_direction_output(struct gpio_chip *chip,
 					unsigned int offset, int value)
 {
 	struct ts4900_gpio_priv *priv = gpiochip_get_data(chip);
+	unsigned int reg;
 	int ret;
 
+	/* If changing from an input to an output, we need to first set the
+	 * proper data bit to what is requested and then set OE bit. This
+	 * prevents a glitch that can occur on the IO line
+	 */
+	regmap_read(priv->regmap, offset, &reg);
+	if (!(reg & TS4900_GPIO_OE)) {
+		if (value)
+			reg = TS4900_GPIO_OUT;
+		else
+			reg &= ~TS4900_GPIO_OUT;
+
+		regmap_write(priv->regmap, offset, reg);
+	}
+
 	if (value)
 		ret = regmap_write(priv->regmap, offset, TS4900_GPIO_OE |
 							 TS4900_GPIO_OUT);

drivers/gpio/gpiolib-acpi.c

@@ -307,7 +307,8 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
 	if (IS_ERR(desc))
 		return desc;
 
-	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout);
+	/* ACPI uses hundredths of milliseconds units */
+	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10);
 	if (ret)
 		dev_warn(chip->parent,
 			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
@@ -1035,7 +1036,8 @@ int acpi_dev_gpio_irq_get_by(struct acpi_device *adev, const char *name, int ind
 			if (ret < 0)
 				return ret;
 
-			ret = gpio_set_debounce_timeout(desc, info.debounce);
+			/* ACPI uses hundredths of milliseconds units */
+			ret = gpio_set_debounce_timeout(desc, info.debounce * 10);
 			if (ret)
 				return ret;
 

drivers/gpio/gpiolib.c

@@ -1701,11 +1701,6 @@ static inline void gpiochip_irqchip_free_valid_mask(struct gpio_chip *gc)
  */
 int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset)
 {
-#ifdef CONFIG_PINCTRL
-	if (list_empty(&gc->gpiodev->pin_ranges))
-		return 0;
-#endif
-
 	return pinctrl_gpio_request(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_request);
@@ -1717,11 +1712,6 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_request);
  */
 void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset)
 {
-#ifdef CONFIG_PINCTRL
-	if (list_empty(&gc->gpiodev->pin_ranges))
-		return;
-#endif
-
 	pinctrl_gpio_free(gc->gpiodev->base + offset);
 }
 EXPORT_SYMBOL_GPL(gpiochip_generic_free);
@@ -2227,6 +2217,16 @@ static int gpio_set_bias(struct gpio_desc *desc)
 	return gpio_set_config_with_argument_optional(desc, bias, arg);
 }
 
+/**
+ * gpio_set_debounce_timeout() - Set debounce timeout
+ * @desc:	GPIO descriptor to set the debounce timeout
+ * @debounce:	Debounce timeout in microseconds
+ *
+ * The function calls the certain GPIO driver to set debounce timeout
+ * in the hardware.
+ *
+ * Returns 0 on success, or negative error code otherwise.
+ */
 int gpio_set_debounce_timeout(struct gpio_desc *desc, unsigned int debounce)
 {
 	return gpio_set_config_with_argument_optional(desc,