usb: typec: tcpm: print error on hard reset

A USB-C hard reset involves removing the voltage from VBUS for some
time. So basically it has the same effect as removing the USB-C plug
for a short moment. If the machine is powered from the USB-C port and
does not have a fallback supply (e.g. a battery), this will result in
a full machine reset due to power loss.

Ideally we want to avoid triggering a hard reset on these boards. A
non-working USB-C port is probably better than unplanned reboots. But
boards with a backup supply should do the hard reset to get everything
working again.

In theory it would be enough to check the self_powered property, but
it seems the property might not be configured consistently enough in
system firmwares.

So let's start with just printing an error message when a hard reset is
triggered on systems we expect to be affected. This at least makes
debugging issues on affected systems easier without impacting unaffected
systems too much.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240523171645.223225-1-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/typec/tcpm/tcpm.c

@@ -5208,6 +5208,8 @@ static void run_state_machine(struct tcpm_port *port)
 	case HARD_RESET_SEND:
 		if (port->ams != NONE_AMS)
 			tcpm_ams_finish(port);
+		if (!port->self_powered && port->port_type == TYPEC_PORT_SNK)
+			dev_err(port->dev, "Initiating hard-reset, which might result in machine power-loss.\n");
 		/*
 		 * State machine will be directed to HARD_RESET_START,
 		 * thus set upcoming_state to INVALID_STATE.