Merge ed6c23b175 ("Merge tag 'pinctrl-v6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl") into android-mainline
Steps on the way to v6.8-rc1 Signed-off-by: Lee Jones <joneslee@google.com> Change-Id: Ide9aeec28438a0b0ae9f0783b0657f3b249a607e
This commit is contained in:
Lee Jones
@@ -114,6 +114,45 @@ Description:
|
||||
speed of 1000Mbps of the named network device.
|
||||
Setting this value also immediately changes the LED state.
|
||||
|
||||
What: /sys/class/leds/<led>/link_2500
|
||||
Date: Nov 2023
|
||||
KernelVersion: 6.8
|
||||
Contact: linux-leds@vger.kernel.org
|
||||
Description:
|
||||
Signal the link speed state of 2500Mbps of the named network device.
|
||||
|
||||
If set to 0 (default), the LED's normal state is off.
|
||||
|
||||
If set to 1, the LED's normal state reflects the link state
|
||||
speed of 2500Mbps of the named network device.
|
||||
Setting this value also immediately changes the LED state.
|
||||
|
||||
What: /sys/class/leds/<led>/link_5000
|
||||
Date: Nov 2023
|
||||
KernelVersion: 6.8
|
||||
Contact: linux-leds@vger.kernel.org
|
||||
Description:
|
||||
Signal the link speed state of 5000Mbps of the named network device.
|
||||
|
||||
If set to 0 (default), the LED's normal state is off.
|
||||
|
||||
If set to 1, the LED's normal state reflects the link state
|
||||
speed of 5000Mbps of the named network device.
|
||||
Setting this value also immediately changes the LED state.
|
||||
|
||||
What: /sys/class/leds/<led>/link_10000
|
||||
Date: Nov 2023
|
||||
KernelVersion: 6.8
|
||||
Contact: linux-leds@vger.kernel.org
|
||||
Description:
|
||||
Signal the link speed state of 10000Mbps of the named network device.
|
||||
|
||||
If set to 0 (default), the LED's normal state is off.
|
||||
|
||||
If set to 1, the LED's normal state reflects the link state
|
||||
speed of 10000Mbps of the named network device.
|
||||
Setting this value also immediately changes the LED state.
|
||||
|
||||
What: /sys/class/leds/<led>/half_duplex
|
||||
Date: Jun 2023
|
||||
KernelVersion: 6.5
|
||||
|
||||
@@ -4,3 +4,59 @@ KernelVersion: 5.10
|
||||
Contact: linux-leds@vger.kernel.org
|
||||
Description:
|
||||
Specifies the tty device name of the triggering tty
|
||||
|
||||
What: /sys/class/leds/<led>/rx
|
||||
Date: February 2024
|
||||
KernelVersion: 6.8
|
||||
Description:
|
||||
Signal reception (rx) of data on the named tty device.
|
||||
If set to 0, the LED will not blink on reception.
|
||||
If set to 1 (default), the LED will blink on reception.
|
||||
|
||||
What: /sys/class/leds/<led>/tx
|
||||
Date: February 2024
|
||||
KernelVersion: 6.8
|
||||
Description:
|
||||
Signal transmission (tx) of data on the named tty device.
|
||||
If set to 0, the LED will not blink on transmission.
|
||||
If set to 1 (default), the LED will blink on transmission.
|
||||
|
||||
What: /sys/class/leds/<led>/cts
|
||||
Date: February 2024
|
||||
KernelVersion: 6.8
|
||||
Description:
|
||||
CTS = Clear To Send
|
||||
DCE is ready to accept data from the DTE.
|
||||
If the line state is detected, the LED is switched on.
|
||||
If set to 0 (default), the LED will not evaluate CTS.
|
||||
If set to 1, the LED will evaluate CTS.
|
||||
|
||||
What: /sys/class/leds/<led>/dsr
|
||||
Date: February 2024
|
||||
KernelVersion: 6.8
|
||||
Description:
|
||||
DSR = Data Set Ready
|
||||
DCE is ready to receive and send data.
|
||||
If the line state is detected, the LED is switched on.
|
||||
If set to 0 (default), the LED will not evaluate DSR.
|
||||
If set to 1, the LED will evaluate DSR.
|
||||
|
||||
What: /sys/class/leds/<led>/dcd
|
||||
Date: February 2024
|
||||
KernelVersion: 6.8
|
||||
Description:
|
||||
DCD = Data Carrier Detect
|
||||
DTE is receiving a carrier from the DCE.
|
||||
If the line state is detected, the LED is switched on.
|
||||
If set to 0 (default), the LED will not evaluate CAR (DCD).
|
||||
If set to 1, the LED will evaluate CAR (DCD).
|
||||
|
||||
What: /sys/class/leds/<led>/rng
|
||||
Date: February 2024
|
||||
KernelVersion: 6.8
|
||||
Description:
|
||||
RNG = Ring Indicator
|
||||
DCE has detected an incoming ring signal on the telephone
|
||||
line. If the line state is detected, the LED is switched on.
|
||||
If set to 0 (default), the LED will not evaluate RNG.
|
||||
If set to 1, the LED will evaluate RNG.
|
||||
|
||||
@@ -0,0 +1,137 @@
|
||||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Allwinner A100 LED Controller
|
||||
|
||||
maintainers:
|
||||
- Samuel Holland <samuel@sholland.org>
|
||||
|
||||
description:
|
||||
The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
|
||||
interface to drive up to 1024 RGB LEDs.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: allwinner,sun50i-a100-ledc
|
||||
- items:
|
||||
- enum:
|
||||
- allwinner,sun20i-d1-ledc
|
||||
- allwinner,sun50i-r329-ledc
|
||||
- const: allwinner,sun50i-a100-ledc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
"#address-cells":
|
||||
const: 1
|
||||
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: Bus clock
|
||||
- description: Module clock
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: bus
|
||||
- const: mod
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
maxItems: 1
|
||||
description: TX DMA channel
|
||||
|
||||
dma-names:
|
||||
const: tx
|
||||
|
||||
allwinner,pixel-format:
|
||||
description: Pixel format (subpixel transmission order), default is "grb"
|
||||
enum:
|
||||
- bgr
|
||||
- brg
|
||||
- gbr
|
||||
- grb
|
||||
- rbg
|
||||
- rgb
|
||||
|
||||
allwinner,t0h-ns:
|
||||
default: 336
|
||||
description: Length of high pulse when transmitting a "0" bit
|
||||
|
||||
allwinner,t0l-ns:
|
||||
default: 840
|
||||
description: Length of low pulse when transmitting a "0" bit
|
||||
|
||||
allwinner,t1h-ns:
|
||||
default: 882
|
||||
description: Length of high pulse when transmitting a "1" bit
|
||||
|
||||
allwinner,t1l-ns:
|
||||
default: 294
|
||||
description: Length of low pulse when transmitting a "1" bit
|
||||
|
||||
allwinner,treset-ns:
|
||||
default: 300000
|
||||
description: Minimum delay between transmission frames
|
||||
|
||||
patternProperties:
|
||||
"^multi-led@[0-9a-f]+$":
|
||||
type: object
|
||||
$ref: leds-class-multicolor.yaml#
|
||||
unevaluatedProperties: false
|
||||
properties:
|
||||
reg:
|
||||
minimum: 0
|
||||
maximum: 1023
|
||||
description: Index of the LED in the series (must be contiguous)
|
||||
|
||||
required:
|
||||
- reg
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- clocks
|
||||
- clock-names
|
||||
- resets
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
ledc: led-controller@2008000 {
|
||||
compatible = "allwinner,sun20i-d1-ledc",
|
||||
"allwinner,sun50i-a100-ledc";
|
||||
reg = <0x2008000 0x400>;
|
||||
interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&ccu 12>, <&ccu 34>;
|
||||
clock-names = "bus", "mod";
|
||||
resets = <&ccu 12>;
|
||||
dmas = <&dma 42>;
|
||||
dma-names = "tx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
multi-led@0 {
|
||||
reg = <0x0>;
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
@@ -10,15 +10,19 @@ maintainers:
|
||||
- Martin Kurbanov <mmkurbanov@sberdevices.ru>
|
||||
|
||||
description: |
|
||||
This controller is present on AW20036/AW20054/AW20072.
|
||||
It is a 3x12/6x9/6x12 matrix LED programmed via
|
||||
an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
|
||||
3 pattern controllers for auto breathing or group dimming control.
|
||||
It is a matrix LED driver programmed via an I2C interface. Devices have
|
||||
a set of individually controlled leds and support 3 pattern controllers
|
||||
for auto breathing or group dimming control. Supported devices:
|
||||
- AW20036 (3x12) 36 LEDs
|
||||
- AW20054 (6x9) 54 LEDs
|
||||
- AW20072 (6x12) 72 LEDs
|
||||
- AW20108 (9x12) 108 LEDs
|
||||
|
||||
For more product information please see the link below:
|
||||
aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
|
||||
aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
|
||||
aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
|
||||
aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
@@ -26,6 +30,7 @@ properties:
|
||||
- awinic,aw20036
|
||||
- awinic,aw20054
|
||||
- awinic,aw20072
|
||||
- awinic,aw20108
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
@@ -36,13 +41,11 @@ properties:
|
||||
"#size-cells":
|
||||
const: 0
|
||||
|
||||
awinic,display-rows:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Leds matrix size
|
||||
enable-gpios:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"^led@[0-9a-f]$":
|
||||
"^led@[0-9a-f]+$":
|
||||
type: object
|
||||
$ref: common.yaml#
|
||||
unevaluatedProperties: false
|
||||
@@ -60,16 +63,11 @@ patternProperties:
|
||||
since the chip has a single global setting.
|
||||
The maximum output current of each LED is calculated by the
|
||||
following formula:
|
||||
IMAXled = 160000 * (592 / 600.5) * (1 / display-rows)
|
||||
IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
|
||||
And the minimum output current formula:
|
||||
IMINled = 3300 * (592 / 600.5) * (1 / display-rows)
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- awinic,display-rows
|
||||
IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
|
||||
where max-current-switch-number is determinated by led configuration
|
||||
and depends on how leds are physically connected to the led driver.
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
@@ -78,18 +76,67 @@ allOf:
|
||||
contains:
|
||||
const: awinic,aw20036
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[0-9a-f]+$":
|
||||
properties:
|
||||
reg:
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 36
|
||||
|
||||
- if:
|
||||
properties:
|
||||
awinic,display-rows:
|
||||
enum: [1, 2, 3]
|
||||
else:
|
||||
compatible:
|
||||
contains:
|
||||
const: awinic,aw20054
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[0-9a-f]+$":
|
||||
properties:
|
||||
reg:
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 54
|
||||
|
||||
- if:
|
||||
properties:
|
||||
awinic,display-rows:
|
||||
enum: [1, 2, 3, 4, 5, 6, 7]
|
||||
compatible:
|
||||
contains:
|
||||
const: awinic,aw20072
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[0-9a-f]+$":
|
||||
properties:
|
||||
reg:
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 72
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: awinic,aw20108
|
||||
then:
|
||||
patternProperties:
|
||||
"^led@[0-9a-f]+$":
|
||||
properties:
|
||||
reg:
|
||||
items:
|
||||
minimum: 0
|
||||
maximum: 108
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
i2c {
|
||||
@@ -101,7 +148,7 @@ examples:
|
||||
reg = <0x3a>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
awinic,display-rows = <3>;
|
||||
enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
led@0 {
|
||||
reg = <0x0>;
|
||||
|
||||
@@ -167,7 +167,7 @@ properties:
|
||||
Note that this flag is mainly used for PWM-LEDs, where it is not possible
|
||||
to map brightness to current. Drivers for other controllers should use
|
||||
led-max-microamp.
|
||||
$ref: /schemas/types.yaml#definitions/uint32
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
panic-indicator:
|
||||
description:
|
||||
|
||||
@@ -89,9 +89,11 @@ additionalProperties: false
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/leds/common.h>
|
||||
spmi {
|
||||
|
||||
pmic {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led-controller@ee00 {
|
||||
compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
|
||||
reg = <0xee00>;
|
||||
|
||||
@@ -23,6 +23,24 @@ properties:
|
||||
- qcom,ipq8074-apcs-apps-global
|
||||
- qcom,ipq9574-apcs-apps-global
|
||||
- const: qcom,ipq6018-apcs-apps-global
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,qcs404-apcs-apps-global
|
||||
- const: qcom,msm8916-apcs-kpss-global
|
||||
- const: syscon
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,msm8976-apcs-kpss-global
|
||||
- const: qcom,msm8994-apcs-kpss-global
|
||||
- const: syscon
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,msm8998-apcs-hmss-global
|
||||
- qcom,sdm660-apcs-hmss-global
|
||||
- qcom,sm4250-apcs-hmss-global
|
||||
- qcom,sm6115-apcs-hmss-global
|
||||
- qcom,sm6125-apcs-hmss-global
|
||||
- const: qcom,msm8994-apcs-kpss-global
|
||||
- items:
|
||||
- enum:
|
||||
- qcom,sc7180-apss-shared
|
||||
@@ -34,22 +52,14 @@ properties:
|
||||
- qcom,msm8916-apcs-kpss-global
|
||||
- qcom,msm8939-apcs-kpss-global
|
||||
- qcom,msm8953-apcs-kpss-global
|
||||
- qcom,msm8976-apcs-kpss-global
|
||||
- qcom,msm8994-apcs-kpss-global
|
||||
- qcom,qcs404-apcs-apps-global
|
||||
- qcom,sdx55-apcs-gcc
|
||||
- const: syscon
|
||||
- enum:
|
||||
- qcom,ipq6018-apcs-apps-global
|
||||
- qcom,ipq8074-apcs-apps-global
|
||||
- qcom,msm8996-apcs-hmss-global
|
||||
- qcom,msm8998-apcs-hmss-global
|
||||
- qcom,qcm2290-apcs-hmss-global
|
||||
- qcom,sdm660-apcs-hmss-global
|
||||
- qcom,sdm845-apss-shared
|
||||
- qcom,sm4250-apcs-hmss-global
|
||||
- qcom,sm6115-apcs-hmss-global
|
||||
- qcom,sm6125-apcs-hmss-global
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
@@ -80,10 +90,9 @@ allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,msm8916-apcs-kpss-global
|
||||
- qcom,msm8939-apcs-kpss-global
|
||||
- qcom,qcs404-apcs-apps-global
|
||||
contains:
|
||||
enum:
|
||||
- qcom,msm8916-apcs-kpss-global
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
@@ -95,6 +104,25 @@ allOf:
|
||||
- const: pll
|
||||
- const: aux
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- qcom,msm8939-apcs-kpss-global
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: primary pll parent of the clock driver
|
||||
- description: auxiliary parent
|
||||
- description: reference clock
|
||||
clock-names:
|
||||
items:
|
||||
- const: pll
|
||||
- const: aux
|
||||
- const: ref
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
@@ -113,6 +141,7 @@ allOf:
|
||||
- const: ref
|
||||
- const: pll
|
||||
- const: aux
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
@@ -137,16 +166,10 @@ allOf:
|
||||
compatible:
|
||||
enum:
|
||||
- qcom,msm8953-apcs-kpss-global
|
||||
- qcom,msm8976-apcs-kpss-global
|
||||
- qcom,msm8994-apcs-kpss-global
|
||||
- qcom,msm8996-apcs-hmss-global
|
||||
- qcom,msm8998-apcs-hmss-global
|
||||
- qcom,qcm2290-apcs-hmss-global
|
||||
- qcom,sdm660-apcs-hmss-global
|
||||
- qcom,sdm845-apss-shared
|
||||
- qcom,sm4250-apcs-hmss-global
|
||||
- qcom,sm6115-apcs-hmss-global
|
||||
- qcom,sm6125-apcs-hmss-global
|
||||
then:
|
||||
properties:
|
||||
clocks: false
|
||||
@@ -192,7 +215,8 @@ examples:
|
||||
#define GCC_APSS_AHB_CLK_SRC 1
|
||||
#define GCC_GPLL0_AO_OUT_MAIN 123
|
||||
apcs: mailbox@b011000 {
|
||||
compatible = "qcom,qcs404-apcs-apps-global", "syscon";
|
||||
compatible = "qcom,qcs404-apcs-apps-global",
|
||||
"qcom,msm8916-apcs-kpss-global", "syscon";
|
||||
reg = <0x0b011000 0x1000>;
|
||||
#mbox-cells = <1>;
|
||||
clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
|
||||
|
||||
@@ -35,6 +35,7 @@ properties:
|
||||
- qcom,sm8450-ipcc
|
||||
- qcom,sm8550-ipcc
|
||||
- qcom,sm8650-ipcc
|
||||
- qcom,x1e80100-ipcc
|
||||
- const: qcom,ipcc
|
||||
|
||||
reg:
|
||||
|
||||
@@ -37,7 +37,9 @@ maintainers:
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: xlnx,zynqmp-ipi-mailbox
|
||||
enum:
|
||||
- xlnx,zynqmp-ipi-mailbox
|
||||
- xlnx,versal-ipi-mailbox
|
||||
|
||||
method:
|
||||
description: |
|
||||
@@ -58,6 +60,12 @@ properties:
|
||||
'#size-cells':
|
||||
const: 2
|
||||
|
||||
reg:
|
||||
maxItems: 2
|
||||
|
||||
reg-names:
|
||||
maxItems: 2
|
||||
|
||||
xlnx,ipi-id:
|
||||
description: |
|
||||
Remote Xilinx IPI agent ID of which the mailbox is connected to.
|
||||
@@ -76,7 +84,17 @@ patternProperties:
|
||||
properties:
|
||||
|
||||
compatible:
|
||||
const: xlnx,zynqmp-ipi-dest-mailbox
|
||||
enum:
|
||||
- xlnx,zynqmp-ipi-dest-mailbox
|
||||
- xlnx,versal-ipi-dest-mailbox
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
|
||||
reg-names:
|
||||
minItems: 1
|
||||
maxItems: 4
|
||||
|
||||
xlnx,ipi-id:
|
||||
description:
|
||||
@@ -88,23 +106,44 @@ patternProperties:
|
||||
description:
|
||||
It contains tx(0) or rx(1) channel IPI id number.
|
||||
|
||||
reg:
|
||||
maxItems: 4
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- xlnx,zynqmp-ipi-dest-mailbox
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
maxItems: 4
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: local_request_region
|
||||
- const: local_response_region
|
||||
- const: remote_request_region
|
||||
- const: remote_response_region
|
||||
reg-names:
|
||||
items:
|
||||
- const: local_request_region
|
||||
- const: local_response_region
|
||||
- const: remote_request_region
|
||||
- const: remote_response_region
|
||||
else:
|
||||
properties:
|
||||
reg:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: Remote IPI agent control register region
|
||||
- description: Remote IPI agent optional message buffers
|
||||
|
||||
reg-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: ctrl
|
||||
- const: msg
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- "#mbox-cells"
|
||||
|
||||
additionalProperties: false
|
||||
- xlnx,ipi-id
|
||||
|
||||
required:
|
||||
- compatible
|
||||
@@ -113,6 +152,36 @@ required:
|
||||
- '#size-cells'
|
||||
- xlnx,ipi-id
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- xlnx,zynqmp-ipi-mailbox
|
||||
then:
|
||||
properties:
|
||||
reg: false
|
||||
reg-names: false
|
||||
|
||||
else:
|
||||
properties:
|
||||
reg:
|
||||
items:
|
||||
- description: Host IPI agent control register region
|
||||
- description: Host IPI agent optional message buffers
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: ctrl
|
||||
- const: msg
|
||||
|
||||
required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include<dt-bindings/interrupt-controller/arm-gic.h>
|
||||
@@ -144,4 +213,41 @@ examples:
|
||||
};
|
||||
};
|
||||
|
||||
- |
|
||||
#include<dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
bus {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
mailbox@ff300000 {
|
||||
compatible = "xlnx,versal-ipi-mailbox";
|
||||
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
reg = <0x0 0xff300000 0x0 0x1000>,
|
||||
<0x0 0xff990000 0x0 0x1ff>;
|
||||
reg-names = "ctrl", "msg";
|
||||
xlnx,ipi-id = <0>;
|
||||
ranges;
|
||||
|
||||
/* buffered IPI */
|
||||
mailbox@ff340000 {
|
||||
compatible = "xlnx,versal-ipi-dest-mailbox";
|
||||
reg = <0x0 0xff340000 0x0 0x1000>,
|
||||
<0x0 0xff990400 0x0 0x1ff>;
|
||||
reg-names = "ctrl", "msg";
|
||||
#mbox-cells = <1>;
|
||||
xlnx,ipi-id = <4>;
|
||||
};
|
||||
|
||||
/* bufferless IPI */
|
||||
mailbox@ff370000 {
|
||||
compatible = "xlnx,versal-ipi-dest-mailbox";
|
||||
reg = <0x0 0xff370000 0x0 0x1000>;
|
||||
reg-names = "ctrl";
|
||||
#mbox-cells = <1>;
|
||||
xlnx,ipi-id = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
||||
@@ -0,0 +1,223 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger
|
||||
|
||||
maintainers:
|
||||
- Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
|
||||
|
||||
description:
|
||||
AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO
|
||||
power supplies, a battery charger and an RTC. So far only bindings for the
|
||||
two step-up DC/DC converters are defined.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ams,as3711
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
backlight:
|
||||
description:
|
||||
Step-up converter configuration, to be used as a backlight source
|
||||
type: object
|
||||
additionalProperties: false
|
||||
properties:
|
||||
compatible:
|
||||
const: ams,as3711-bl
|
||||
|
||||
su1-dev:
|
||||
description: Framebuffer phandle for the first step-up converter
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
|
||||
su1-max-uA:
|
||||
description: Maximum current for the first step-up converter
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
su2-dev:
|
||||
description: Framebuffer phandle for the second step-up converter
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
|
||||
su2-max-uA:
|
||||
description: Maximum current for the second step-up converter
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
su2-feedback-voltage:
|
||||
description: Second step-up converter uses voltage feedback
|
||||
type: boolean
|
||||
|
||||
su2-feedback-curr1:
|
||||
description:
|
||||
Second step-up converter uses CURR1 input for current feedback
|
||||
type: boolean
|
||||
|
||||
su2-feedback-curr2:
|
||||
description:
|
||||
Second step-up converter uses CURR2 input for current feedback
|
||||
type: boolean
|
||||
|
||||
su2-feedback-curr3:
|
||||
description:
|
||||
Second step-up converter uses CURR3 input for current feedback
|
||||
type: boolean
|
||||
|
||||
su2-feedback-curr-auto:
|
||||
description:
|
||||
Second step-up converter uses automatic current feedback selection
|
||||
type: boolean
|
||||
|
||||
su2-fbprot-lx-sd4:
|
||||
description:
|
||||
Second step-up converter uses LX_SD4 for over-voltage protection
|
||||
type: boolean
|
||||
|
||||
su2-fbprot-gpio2:
|
||||
description:
|
||||
Second step-up converter uses GPIO2 for over-voltage protection
|
||||
type: boolean
|
||||
|
||||
su2-fbprot-gpio3:
|
||||
description:
|
||||
Second step-up converter uses GPIO3 for over-voltage protection
|
||||
type: boolean
|
||||
|
||||
su2-fbprot-gpio4:
|
||||
description:
|
||||
Second step-up converter uses GPIO4 for over-voltage protection
|
||||
type: boolean
|
||||
|
||||
su2-auto-curr1:
|
||||
description:
|
||||
Second step-up converter uses CURR1 input for automatic current
|
||||
feedback
|
||||
type: boolean
|
||||
|
||||
su2-auto-curr2:
|
||||
description:
|
||||
Second step-up converter uses CURR2 input for automatic current
|
||||
feedback
|
||||
type: boolean
|
||||
|
||||
su2-auto-curr3:
|
||||
description:
|
||||
Second step-up converter uses CURR3 input for automatic current
|
||||
feedback
|
||||
type: boolean
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
dependentRequired:
|
||||
# To use the SU1 converter as a backlight source the following two
|
||||
# properties must be provided:
|
||||
su1-dev: [ su1-max-uA ]
|
||||
su1-max-uA: [ su1-dev ]
|
||||
|
||||
# To use the SU2 converter as a backlight source the following two
|
||||
# properties must be provided:
|
||||
su2-dev: [ su2-max-uA ]
|
||||
su2-max-uA: [ su2-dev ]
|
||||
|
||||
su2-feedback-voltage: [ su2-dev ]
|
||||
su2-feedback-curr1: [ su2-dev ]
|
||||
su2-feedback-curr2: [ su2-dev ]
|
||||
su2-feedback-curr3: [ su2-dev ]
|
||||
su2-feedback-curr-auto: [ su2-dev ]
|
||||
su2-fbprot-lx-sd4: [ su2-dev ]
|
||||
su2-fbprot-gpio2: [ su2-dev ]
|
||||
su2-fbprot-gpio3: [ su2-dev ]
|
||||
su2-fbprot-gpio4: [ su2-dev ]
|
||||
su2-auto-curr1: [ su2-feedback-curr-auto ]
|
||||
su2-auto-curr2: [ su2-feedback-curr-auto ]
|
||||
su2-auto-curr3: [ su2-feedback-curr-auto ]
|
||||
|
||||
dependentSchemas:
|
||||
su2-dev:
|
||||
allOf:
|
||||
- oneOf:
|
||||
- required:
|
||||
- su2-feedback-voltage
|
||||
- required:
|
||||
- su2-feedback-curr1
|
||||
- required:
|
||||
- su2-feedback-curr2
|
||||
- required:
|
||||
- su2-feedback-curr3
|
||||
- required:
|
||||
- su2-feedback-curr-auto
|
||||
- oneOf:
|
||||
- required:
|
||||
- su2-fbprot-lx-sd4
|
||||
- required:
|
||||
- su2-fbprot-gpio2
|
||||
- required:
|
||||
- su2-fbprot-gpio3
|
||||
- required:
|
||||
- su2-fbprot-gpio4
|
||||
|
||||
su2-feedback-curr-auto:
|
||||
anyOf:
|
||||
- required:
|
||||
- su2-auto-curr1
|
||||
- required:
|
||||
- su2-auto-curr2
|
||||
- required:
|
||||
- su2-auto-curr3
|
||||
|
||||
regulators:
|
||||
description: Other DC/DC and LDO supplies
|
||||
type: object
|
||||
unevaluatedProperties: false
|
||||
patternProperties:
|
||||
"^(sd[1-4]|ldo[1-8])$":
|
||||
type: object
|
||||
$ref: /schemas/regulator/regulator.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pmic@40 {
|
||||
compatible = "ams,as3711";
|
||||
reg = <0x40>;
|
||||
|
||||
regulators {
|
||||
sd4 {
|
||||
regulator-name = "1.215V";
|
||||
regulator-min-microvolt = <1215000>;
|
||||
regulator-max-microvolt = <1235000>;
|
||||
};
|
||||
ldo2 {
|
||||
regulator-name = "2.8V CPU";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "ams,as3711-bl";
|
||||
su2-dev = <&lcdc>;
|
||||
su2-max-uA = <36000>;
|
||||
su2-feedback-curr-auto;
|
||||
su2-fbprot-gpio4;
|
||||
su2-auto-curr1;
|
||||
su2-auto-curr2;
|
||||
su2-auto-curr3;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1,73 +0,0 @@
|
||||
AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
|
||||
supplies, a battery charger and an RTC. So far only bindings for the two stepup
|
||||
DCDC converters are defined. Other DCDC and LDO supplies are configured, using
|
||||
standard regulator properties, they must belong to a sub-node, called
|
||||
"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
|
||||
configuration should be placed in a subnode, called "backlight."
|
||||
|
||||
Compulsory properties:
|
||||
- compatible : must be "ams,as3711"
|
||||
- reg : specifies the I2C address
|
||||
|
||||
To use the SU1 converter as a backlight source the following two properties must
|
||||
be provided:
|
||||
- su1-dev : framebuffer phandle
|
||||
- su1-max-uA : maximum current
|
||||
|
||||
To use the SU2 converter as a backlight source the following two properties must
|
||||
be provided:
|
||||
- su2-dev : framebuffer phandle
|
||||
- su1-max-uA : maximum current
|
||||
|
||||
Additionally one of these properties must be provided to select the type of
|
||||
feedback used:
|
||||
- su2-feedback-voltage : voltage feedback is used
|
||||
- su2-feedback-curr1 : CURR1 input used for current feedback
|
||||
- su2-feedback-curr2 : CURR2 input used for current feedback
|
||||
- su2-feedback-curr3 : CURR3 input used for current feedback
|
||||
- su2-feedback-curr-auto: automatic current feedback selection
|
||||
|
||||
and one of these to select the over-voltage protection pin
|
||||
- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection
|
||||
- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection
|
||||
- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection
|
||||
- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection
|
||||
|
||||
If "su2-feedback-curr-auto" is selected, one or more of the following properties
|
||||
have to be specified:
|
||||
- su2-auto-curr1 : use CURR1 input for current feedback
|
||||
- su2-auto-curr2 : use CURR2 input for current feedback
|
||||
- su2-auto-curr3 : use CURR3 input for current feedback
|
||||
|
||||
Example:
|
||||
|
||||
as3711@40 {
|
||||
compatible = "ams,as3711";
|
||||
reg = <0x40>;
|
||||
|
||||
regulators {
|
||||
sd4 {
|
||||
regulator-name = "1.215V";
|
||||
regulator-min-microvolt = <1215000>;
|
||||
regulator-max-microvolt = <1235000>;
|
||||
};
|
||||
ldo2 {
|
||||
regulator-name = "2.8V CPU";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "ams,as3711-bl";
|
||||
su2-dev = <&lcdc>;
|
||||
su2-max-uA = <36000>;
|
||||
su2-feedback-curr-auto;
|
||||
su2-fbprot-gpio4;
|
||||
su2-auto-curr1;
|
||||
su2-auto-curr2;
|
||||
su2-auto-curr3;
|
||||
};
|
||||
};
|
||||
@@ -17,7 +17,7 @@ description: |
|
||||
node.
|
||||
|
||||
The SPMI controller part is provided by
|
||||
Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
|
||||
Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
@@ -42,13 +42,6 @@ properties:
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
properties:
|
||||
'#address-cells':
|
||||
const: 1
|
||||
|
||||
'#size-cells':
|
||||
const: 0
|
||||
|
||||
patternProperties:
|
||||
'^ldo[0-9]+$':
|
||||
type: object
|
||||
@@ -66,72 +59,75 @@ additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/spmi/spmi.h>
|
||||
|
||||
pmic: pmic@0 {
|
||||
compatible = "hisilicon,hi6421v600-spmi";
|
||||
reg = <0 0>;
|
||||
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gpio28>;
|
||||
interrupts = <0 0>;
|
||||
|
||||
regulators {
|
||||
#address-cells = <1>;
|
||||
spmi {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ldo3: ldo3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
pmic@0 {
|
||||
compatible = "hisilicon,hi6421v600-spmi";
|
||||
reg = <0 SPMI_USID>;
|
||||
|
||||
ldo4: ldo4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <1725000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gpio28>;
|
||||
interrupts = <0 0>;
|
||||
|
||||
ldo9: ldo9 {
|
||||
regulator-name = "ldo9";
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
regulators {
|
||||
ldo3 {
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo15: ldo15 {
|
||||
regulator-name = "ldo15";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
ldo4 {
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <1725000>;
|
||||
regulator-max-microvolt = <1900000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo16: ldo16 {
|
||||
regulator-name = "ldo16";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
ldo9 {
|
||||
regulator-name = "ldo9";
|
||||
regulator-min-microvolt = <1750000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo17: ldo17 {
|
||||
regulator-name = "ldo17";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
ldo15 {
|
||||
regulator-name = "ldo15";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo33: ldo33 {
|
||||
regulator-name = "ldo33";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
ldo16 {
|
||||
regulator-name = "ldo16";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo34: ldo34 {
|
||||
regulator-name = "ldo34";
|
||||
regulator-min-microvolt = <2600000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
ldo17 {
|
||||
regulator-name = "ldo17";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo33 {
|
||||
regulator-name = "ldo33";
|
||||
regulator-min-microvolt = <2500000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo34 {
|
||||
regulator-name = "ldo34";
|
||||
regulator-min-microvolt = <2600000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -99,10 +99,12 @@ examples:
|
||||
- |
|
||||
#include <dt-bindings/mfd/qcom-pm8008.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
qupv3_se13_i2c {
|
||||
|
||||
i2c {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pm8008i@8 {
|
||||
|
||||
pmic@8 {
|
||||
compatible = "qcom,pm8008";
|
||||
reg = <0x8>;
|
||||
#address-cells = <1>;
|
||||
|
||||
@@ -66,6 +66,7 @@ properties:
|
||||
- qcom,pm8841
|
||||
- qcom,pm8909
|
||||
- qcom,pm8916
|
||||
- qcom,pm8937
|
||||
- qcom,pm8941
|
||||
- qcom,pm8950
|
||||
- qcom,pm8953
|
||||
@@ -134,9 +135,15 @@ patternProperties:
|
||||
type: object
|
||||
$ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml#
|
||||
|
||||
"^battery@[0-9a-f]+$":
|
||||
type: object
|
||||
oneOf:
|
||||
- $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml#
|
||||
|
||||
"^charger@[0-9a-f]+$":
|
||||
type: object
|
||||
oneOf:
|
||||
- $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml#
|
||||
- $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
|
||||
- $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
|
||||
- $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml#
|
||||
|
||||
@@ -29,6 +29,8 @@ properties:
|
||||
- qcom,sdx65-tcsr
|
||||
- qcom,sm4450-tcsr
|
||||
- qcom,sm8150-tcsr
|
||||
- qcom,sm8250-tcsr
|
||||
- qcom,sm8350-tcsr
|
||||
- qcom,sm8450-tcsr
|
||||
- qcom,tcsr-apq8064
|
||||
- qcom,tcsr-apq8084
|
||||
|
||||
@@ -19,7 +19,9 @@ description:
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: sprd,ums512-glbregs
|
||||
- enum:
|
||||
- sprd,ums512-glbregs
|
||||
- sprd,ums9620-glbregs
|
||||
- const: syscon
|
||||
- const: simple-mfd
|
||||
|
||||
|
||||
@@ -61,8 +61,6 @@ required:
|
||||
- interrupts
|
||||
- clocks
|
||||
- clock-names
|
||||
- dmas
|
||||
- dma-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
|
||||
@@ -31,6 +31,7 @@ properties:
|
||||
- ti,omap3-padconf
|
||||
- ti,omap4-padconf
|
||||
- ti,omap5-padconf
|
||||
- ti,j7200-padconf
|
||||
- const: pinctrl-single
|
||||
|
||||
reg:
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 24
|
||||
@@ -95,7 +88,10 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
allOf:
|
||||
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -26,13 +26,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 27
|
||||
@@ -100,7 +93,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -22,12 +22,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -100,7 +94,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 35
|
||||
@@ -103,7 +96,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 33
|
||||
@@ -97,7 +90,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -0,0 +1,75 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-common.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm SoC LPASS LPI TLMM Common Properties
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <andersson@kernel.org>
|
||||
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
||||
|
||||
description:
|
||||
Common properties for the Top Level Mode Multiplexer pin controllers in the
|
||||
Low Power Audio SubSystem (LPASS) Low Power Island (LPI) of Qualcomm SoCs.
|
||||
|
||||
properties:
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description:
|
||||
Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
$defs:
|
||||
qcom-tlmm-state:
|
||||
properties:
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-bus-hold: true
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
allOf:
|
||||
- $ref: pincfg-node.yaml#
|
||||
- $ref: pinmux-node.yaml#
|
||||
|
||||
additionalProperties: true
|
||||
|
||||
@@ -25,19 +25,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -110,6 +98,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -23,18 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
'#interrupt-cells': true
|
||||
gpio-controller: true
|
||||
'#gpio-cells': true
|
||||
gpio-ranges: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -74,6 +62,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -23,12 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
maxItems: 1
|
||||
|
||||
@@ -82,7 +76,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 86
|
||||
@@ -92,7 +85,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -25,19 +25,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -108,6 +96,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 61
|
||||
@@ -114,7 +107,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -22,12 +22,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -117,7 +112,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 76
|
||||
@@ -108,7 +101,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 73
|
||||
@@ -124,7 +117,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 73
|
||||
@@ -104,7 +97,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -25,13 +25,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 73
|
||||
@@ -114,7 +107,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 75
|
||||
@@ -133,7 +126,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,13 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 75
|
||||
@@ -118,7 +111,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -158,34 +158,40 @@ examples:
|
||||
- |
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||
|
||||
pm8841_mpp: mpps@a000 {
|
||||
compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
|
||||
reg = <0xa000 0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pm8841_mpp 0 0 4>;
|
||||
gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
|
||||
"BT_LED_CTRL", "GPIO-F";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
pmic {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pm8841_default>;
|
||||
pm8841_mpp: mpps@a000 {
|
||||
compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
|
||||
reg = <0xa000>;
|
||||
|
||||
mpp1-state {
|
||||
pins = "mpp1";
|
||||
function = "digital";
|
||||
input-enable;
|
||||
power-source = <PM8841_MPP_S3>;
|
||||
};
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&pm8841_mpp 0 0 4>;
|
||||
gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
|
||||
"BT_LED_CTRL", "GPIO-F";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
default-state {
|
||||
gpio-pins {
|
||||
pins = "mpp1", "mpp2", "mpp3", "mpp4";
|
||||
function = "digital";
|
||||
input-enable;
|
||||
power-source = <PM8841_MPP_S3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pm8841_default>;
|
||||
|
||||
mpp1-state {
|
||||
pins = "mpp1";
|
||||
function = "digital";
|
||||
input-enable;
|
||||
power-source = <PM8841_MPP_S3>;
|
||||
};
|
||||
|
||||
default-state {
|
||||
gpio-pins {
|
||||
pins = "mpp1", "mpp2", "mpp3", "mpp4";
|
||||
function = "digital";
|
||||
input-enable;
|
||||
power-source = <PM8841_MPP_S3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
||||
@@ -22,13 +22,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -92,7 +85,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -29,13 +29,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 60
|
||||
@@ -130,7 +123,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,10 +23,8 @@ properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
@@ -35,10 +33,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 151
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -101,7 +95,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -22,13 +22,8 @@ properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
@@ -37,12 +32,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 148
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -108,6 +97,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -29,13 +29,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 60
|
||||
@@ -112,7 +105,7 @@ required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -20,16 +20,6 @@ properties:
|
||||
reg:
|
||||
maxItems: 2
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -45,7 +35,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -68,42 +59,14 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-bus-hold: true
|
||||
bias-disable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
allOf:
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,24 +23,6 @@ properties:
|
||||
description: Specifies the TLMM summary IRQ
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
'#interrupt-cells':
|
||||
description:
|
||||
Specifies the PIN numbers and Flags, as defined in defined in
|
||||
include/dt-bindings/interrupt-controller/irq.h
|
||||
const: 2
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
'#gpio-cells':
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 88
|
||||
@@ -48,8 +30,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 175
|
||||
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -124,14 +104,8 @@ allOf:
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
- interrupt-controller
|
||||
- '#interrupt-cells'
|
||||
- gpio-controller
|
||||
- '#gpio-cells'
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -31,20 +31,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
'#interrupt-cells': true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
'#gpio-cells': true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -106,6 +93,13 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -32,16 +32,6 @@ properties:
|
||||
- const: core
|
||||
- const: audio
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -57,7 +47,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -79,48 +70,16 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-bus-hold: true
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -25,19 +25,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -108,6 +96,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -34,10 +34,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 57
|
||||
@@ -45,10 +41,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 114
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -130,7 +122,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -25,23 +25,10 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 75
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -98,6 +85,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -26,10 +26,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 75
|
||||
@@ -37,10 +33,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 150
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -110,7 +102,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -23,12 +23,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
maxItems: 1
|
||||
|
||||
@@ -102,7 +96,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -22,12 +22,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
maxItems: 1
|
||||
|
||||
@@ -122,7 +116,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -22,10 +22,8 @@ properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
@@ -34,10 +32,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 133
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -100,7 +94,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -0,0 +1,151 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/qcom,sm4450-tlmm.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. SM4450 TLMM block
|
||||
|
||||
maintainers:
|
||||
- Tengfei Fan <quic_tengfan@quicinc.com>
|
||||
|
||||
description:
|
||||
Top Level Mode Multiplexer pin controller in Qualcomm SM4450 SoC.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,sm4450-pinctrl
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 68
|
||||
|
||||
gpio-line-names:
|
||||
maxItems: 136
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
- $ref: "#/$defs/qcom-sm4450-tlmm-state"
|
||||
- patternProperties:
|
||||
"-pins$":
|
||||
$ref: "#/$defs/qcom-sm4450-tlmm-state"
|
||||
additionalProperties: false
|
||||
|
||||
$defs:
|
||||
qcom-sm4450-tlmm-state:
|
||||
type: object
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
description:
|
||||
List of gpio pins affected by the properties specified in this
|
||||
subnode.
|
||||
items:
|
||||
oneOf:
|
||||
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-5])$"
|
||||
- enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
|
||||
minItems: 1
|
||||
maxItems: 36
|
||||
|
||||
function:
|
||||
description:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
|
||||
atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
|
||||
atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
|
||||
cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
|
||||
cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
|
||||
cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
|
||||
dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
|
||||
jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
|
||||
mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
|
||||
mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
|
||||
mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
|
||||
phase_flag0, phase_flag1, phase_flag10, phase_flag11,
|
||||
phase_flag12, phase_flag13, phase_flag14, phase_flag15,
|
||||
phase_flag16, phase_flag17, phase_flag18, phase_flag19,
|
||||
phase_flag2, phase_flag20, phase_flag21, phase_flag22,
|
||||
phase_flag23, phase_flag24, phase_flag25, phase_flag26,
|
||||
phase_flag27, phase_flag28, phase_flag29, phase_flag3,
|
||||
phase_flag30, phase_flag31, phase_flag4, phase_flag5,
|
||||
phase_flag6, phase_flag7, phase_flag8, phase_flag9,
|
||||
pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
|
||||
prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
|
||||
qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
|
||||
qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
|
||||
qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
|
||||
qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
|
||||
qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
|
||||
qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
|
||||
qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
|
||||
qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
|
||||
tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
|
||||
tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
|
||||
uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
|
||||
uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
|
||||
vsense_trigger ]
|
||||
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
tlmm: pinctrl@f100000 {
|
||||
compatible = "qcom,sm4450-tlmm";
|
||||
reg = <0x0f100000 0x300000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&tlmm 0 0 137>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
gpio-wo-state {
|
||||
pins = "gpio1";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
uart-w-state {
|
||||
rx-pins {
|
||||
pins = "gpio23";
|
||||
function = "qup1_se2";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
tx-pins {
|
||||
pins = "gpio22";
|
||||
function = "qup1_se2";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
@@ -31,16 +31,6 @@ properties:
|
||||
items:
|
||||
- const: audio
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -56,7 +46,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -75,48 +66,17 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-bus-hold: true
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -29,13 +29,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
gpio-reserved-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -97,7 +91,7 @@ required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -30,20 +30,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -105,6 +92,13 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -26,10 +26,6 @@ properties:
|
||||
minItems: 9
|
||||
maxItems: 9
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 78
|
||||
@@ -37,16 +33,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 156
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -112,6 +98,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -25,19 +25,7 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
gpio-reserved-ranges: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
@@ -113,6 +101,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -32,13 +32,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 60
|
||||
@@ -111,7 +104,7 @@ required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -30,13 +30,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 88
|
||||
@@ -113,7 +106,7 @@ required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -30,16 +30,6 @@ properties:
|
||||
- const: core
|
||||
- const: audio
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -55,7 +45,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -78,48 +69,16 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-bus-hold: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -28,13 +28,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 90
|
||||
@@ -106,7 +99,7 @@ required:
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -33,16 +33,6 @@ properties:
|
||||
- const: core
|
||||
- const: audio
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -58,7 +48,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -81,48 +72,16 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-bus-hold: true
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -25,10 +25,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 102
|
||||
@@ -36,16 +32,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 203
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -108,6 +94,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -32,16 +32,6 @@ properties:
|
||||
- const: core
|
||||
- const: audio
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -57,7 +47,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -81,48 +72,16 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-bus-hold: true
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -25,10 +25,6 @@ properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 105
|
||||
@@ -36,16 +32,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 210
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -107,6 +93,12 @@ $defs:
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
@@ -16,7 +16,11 @@ description:
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,sm8550-lpass-lpi-pinctrl
|
||||
oneOf:
|
||||
- const: qcom,sm8550-lpass-lpi-pinctrl
|
||||
- items:
|
||||
- const: qcom,x1e80100-lpass-lpi-pinctrl
|
||||
- const: qcom,sm8550-lpass-lpi-pinctrl
|
||||
|
||||
reg:
|
||||
items:
|
||||
@@ -33,16 +37,6 @@ properties:
|
||||
- const: core
|
||||
- const: audio
|
||||
|
||||
gpio-controller: true
|
||||
|
||||
"#gpio-cells":
|
||||
description: Specifying the pin number and flags, as defined in
|
||||
include/dt-bindings/gpio/gpio.h
|
||||
const: 2
|
||||
|
||||
gpio-ranges:
|
||||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -58,7 +52,8 @@ $defs:
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: /schemas/pinctrl/pincfg-node.yaml
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
@@ -81,48 +76,16 @@ $defs:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
drive-strength:
|
||||
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
||||
default: 2
|
||||
description:
|
||||
Selects the drive strength for the specified pins, in mA.
|
||||
|
||||
slew-rate:
|
||||
enum: [0, 1, 2, 3]
|
||||
default: 0
|
||||
description: |
|
||||
0: No adjustments
|
||||
1: Higher Slew rate (faster edges)
|
||||
2: Lower Slew rate (slower edges)
|
||||
3: Reserved (No adjustments)
|
||||
|
||||
bias-bus-hold: true
|
||||
bias-pull-down: true
|
||||
bias-pull-up: true
|
||||
bias-disable: true
|
||||
input-enable: true
|
||||
output-high: true
|
||||
output-low: true
|
||||
|
||||
required:
|
||||
- pins
|
||||
- function
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
allOf:
|
||||
- $ref: pinctrl.yaml#
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
- gpio-controller
|
||||
- "#gpio-cells"
|
||||
- gpio-ranges
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -22,10 +22,8 @@ properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
interrupt-controller: true
|
||||
"#interrupt-cells": true
|
||||
gpio-controller: true
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
@@ -34,10 +32,6 @@ properties:
|
||||
gpio-line-names:
|
||||
maxItems: 210
|
||||
|
||||
"#gpio-cells": true
|
||||
gpio-ranges: true
|
||||
wakeup-parent: true
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
@@ -117,7 +111,7 @@ required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
||||
@@ -0,0 +1,107 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm SM8650 SoC LPASS LPI TLMM
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
||||
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
|
||||
|
||||
description:
|
||||
Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
|
||||
(LPASS) Low Power Island (LPI) of Qualcomm SM8650 SoC.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,sm8650-lpass-lpi-pinctrl
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: LPASS LPI TLMM Control and Status registers
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: LPASS Core voting clock
|
||||
- description: LPASS Audio voting clock
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: core
|
||||
- const: audio
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
- $ref: "#/$defs/qcom-sm8650-lpass-state"
|
||||
- patternProperties:
|
||||
"-pins$":
|
||||
$ref: "#/$defs/qcom-sm8650-lpass-state"
|
||||
additionalProperties: false
|
||||
|
||||
$defs:
|
||||
qcom-sm8650-lpass-state:
|
||||
type: object
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
description:
|
||||
List of gpio pins affected by the properties specified in this
|
||||
subnode.
|
||||
items:
|
||||
pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
|
||||
|
||||
function:
|
||||
enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
|
||||
dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
|
||||
ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
|
||||
i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
|
||||
i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
|
||||
i2s4_data, i2s4_ws, qca_swr_clk, qca_swr_data, slimbus_clk,
|
||||
slimbus_data, swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data,
|
||||
wsa_swr_clk, wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
|
||||
description:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
|
||||
allOf:
|
||||
- $ref: qcom,lpass-lpi-common.yaml#
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
|
||||
|
||||
lpass_tlmm: pinctrl@6e80000 {
|
||||
compatible = "qcom,sm8650-lpass-lpi-pinctrl";
|
||||
reg = <0x06e80000 0x20000>;
|
||||
|
||||
clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
|
||||
<&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
|
||||
clock-names = "core", "audio";
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&lpass_tlmm 0 0 23>;
|
||||
|
||||
tx-swr-sleep-clk-state {
|
||||
pins = "gpio0";
|
||||
function = "swr_tx_clk";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,141 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/qcom,sm8650-tlmm.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. SM8650 TLMM block
|
||||
|
||||
maintainers:
|
||||
- Bjorn Andersson <andersson@kernel.org>
|
||||
|
||||
description:
|
||||
Top Level Mode Multiplexer pin controller in Qualcomm SM8650 SoC.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,sm8650-tlmm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 105
|
||||
|
||||
gpio-line-names:
|
||||
maxItems: 210
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
- $ref: "#/$defs/qcom-sm8650-tlmm-state"
|
||||
- patternProperties:
|
||||
"-pins$":
|
||||
$ref: "#/$defs/qcom-sm8650-tlmm-state"
|
||||
additionalProperties: false
|
||||
|
||||
$defs:
|
||||
qcom-sm8650-tlmm-state:
|
||||
type: object
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
description:
|
||||
List of gpio pins affected by the properties specified in this
|
||||
subnode.
|
||||
items:
|
||||
oneOf:
|
||||
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
|
||||
- enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
|
||||
minItems: 1
|
||||
maxItems: 36
|
||||
|
||||
function:
|
||||
description:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
|
||||
audio_ext_mclk1, audio_ref_clk, cam_aon_mclk2, cam_aon_mclk4,
|
||||
cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer,
|
||||
cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx,
|
||||
coex_uart2_tx, cri_trng, dbg_out_clk, ddr_bist_complete,
|
||||
ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0,
|
||||
ddr_pxi1, ddr_pxi2, ddr_pxi3, do_not, dp_hot, gcc_gp1,
|
||||
gcc_gp2, gcc_gp3, gnss_adc0, gnss_adc1, i2chub0_se0,
|
||||
i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
|
||||
i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
|
||||
i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws,
|
||||
i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c,
|
||||
jitter_bist, mdp_vsync, mdp_vsync0_out, mdp_vsync1_out,
|
||||
mdp_vsync2_out, mdp_vsync3_out, mdp_vsync_e, nav_gpio0,
|
||||
nav_gpio1, nav_gpio2, nav_gpio3, pcie0_clk_req_n,
|
||||
pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
|
||||
prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
|
||||
qdss_gpio, qlink_big_enable, qlink_big_request,
|
||||
qlink_little_enable, qlink_little_request, qlink_wmss,
|
||||
qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup1_se0,
|
||||
qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5, qup1_se6,
|
||||
qup1_se7, qup2_se0, qup2_se1, qup2_se2, qup2_se3, qup2_se4,
|
||||
qup2_se5, qup2_se6, qup2_se7, sd_write_protect, sdc40, sdc41,
|
||||
sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
|
||||
tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
|
||||
tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
|
||||
tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3, uim0_clk,
|
||||
uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
|
||||
uim1_present, uim1_reset, usb1_hs, usb_phy, vfr_0, vfr_1,
|
||||
vsense_trigger_mirnat ]
|
||||
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
tlmm: pinctrl@f100000 {
|
||||
compatible = "qcom,sm8650-tlmm";
|
||||
reg = <0x0f100000 0x300000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&tlmm 0 0 211>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
gpio-wo-state {
|
||||
pins = "gpio1";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
uart-w-state {
|
||||
rx-pins {
|
||||
pins = "gpio60";
|
||||
function = "qup1_se7";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
tx-pins {
|
||||
pins = "gpio61";
|
||||
function = "qup1_se7";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
@@ -0,0 +1,137 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Technologies, Inc. X1E80100 TLMM block
|
||||
|
||||
maintainers:
|
||||
- Rajendra Nayak <quic_rjendra@quicinc.com>
|
||||
|
||||
description:
|
||||
Top Level Mode Multiplexer pin controller in Qualcomm X1E80100 SoC.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: qcom,x1e80100-tlmm
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
gpio-reserved-ranges:
|
||||
minItems: 1
|
||||
maxItems: 119
|
||||
|
||||
gpio-line-names:
|
||||
maxItems: 238
|
||||
|
||||
patternProperties:
|
||||
"-state$":
|
||||
oneOf:
|
||||
- $ref: "#/$defs/qcom-x1e80100-tlmm-state"
|
||||
- patternProperties:
|
||||
"-pins$":
|
||||
$ref: "#/$defs/qcom-x1e80100-tlmm-state"
|
||||
additionalProperties: false
|
||||
|
||||
$defs:
|
||||
qcom-x1e80100-tlmm-state:
|
||||
type: object
|
||||
description:
|
||||
Pinctrl node's client devices use subnodes for desired pin configuration.
|
||||
Client device subnodes use below standard properties.
|
||||
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
pins:
|
||||
description:
|
||||
List of gpio pins affected by the properties specified in this
|
||||
subnode.
|
||||
items:
|
||||
oneOf:
|
||||
- pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-2][0-9]|23[0-7])$"
|
||||
- enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
|
||||
minItems: 1
|
||||
maxItems: 36
|
||||
|
||||
function:
|
||||
description:
|
||||
Specify the alternative function to be configured for the specified
|
||||
pins.
|
||||
enum: [ aon_cci, aoss_cti, atest_char, atest_char0,
|
||||
atest_char1, atest_char2, atest_char3, atest_usb,
|
||||
audio_ext, audio_ref, cam_aon, cam_mclk, cci_async,
|
||||
cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
|
||||
cci_timer4, cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3,
|
||||
cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
|
||||
ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, ddr_pxi6, ddr_pxi7,
|
||||
edp0_hot, edp0_lcd, edp1_hot, edp1_lcd, eusb0_ac, eusb1_ac,
|
||||
eusb2_ac, eusb3_ac, eusb5_ac, eusb6_ac, gcc_gp1, gcc_gp2,
|
||||
gcc_gp3, gpio, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, i2s1_data0,
|
||||
i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, mdp_vsync0,
|
||||
mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5,
|
||||
mdp_vsync6, mdp_vsync7, mdp_vsync8, pcie3_clk, pcie4_clk,
|
||||
pcie5_clk, pcie6a_clk, pcie6b_clk, phase_flag, pll_bist, pll_clk,
|
||||
prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
|
||||
qdss_gpio, qspi00, qspi01, qspi02, qspi03, qspi0_clk, qspi0_cs0,
|
||||
qspi0_cs1, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
|
||||
qup0_se5, qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
|
||||
qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, qup2_se2,
|
||||
qup2_se3, qup2_se4, qup2_se5, qup2_se6, qup2_se7, sd_write, sdc4_clk,
|
||||
sdc4_cmd, sdc4_data0, sdc4_data1, sdc4_data2, sdc4_data3, sys_throttle,
|
||||
tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5,
|
||||
tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
|
||||
tsense_pwm1, tsense_pwm2, sense_pwm3, tsense_pwm4, usb0_dp, usb0_phy,
|
||||
usb0_sbrx, usb0_sbtx, usb1_dp, usb1_phy, usb1_sbrx, usb1_sbtx,
|
||||
usb2_dp, usb2_phy, usb2_sbrx, usb2_sbtx, vsense_trigger ]
|
||||
|
||||
required:
|
||||
- pins
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
tlmm: pinctrl@f100000 {
|
||||
compatible = "qcom,x1e80100-tlmm";
|
||||
reg = <0x0f100000 0xf00000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&tlmm 0 0 239>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
gpio-wo-state {
|
||||
pins = "gpio1";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
uart-w-state {
|
||||
rx-pins {
|
||||
pins = "gpio26";
|
||||
function = "qup2_se7";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
tx-pins {
|
||||
pins = "gpio27";
|
||||
function = "qup2_se7";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
@@ -20,7 +20,7 @@ description:
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: "renesas,r7s9210-pinctrl" # RZ/A2M
|
||||
const: renesas,r7s9210-pinctrl # RZ/A2M
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
@@ -28,15 +28,27 @@ description: |
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- samsung,s3c2410-wakeup-eint
|
||||
- samsung,s3c2412-wakeup-eint
|
||||
- samsung,s3c64xx-wakeup-eint
|
||||
- samsung,s5pv210-wakeup-eint
|
||||
- samsung,exynos4210-wakeup-eint
|
||||
- samsung,exynos7-wakeup-eint
|
||||
- samsung,exynos850-wakeup-eint
|
||||
- samsung,exynosautov9-wakeup-eint
|
||||
oneOf:
|
||||
- enum:
|
||||
- samsung,s3c2410-wakeup-eint
|
||||
- samsung,s3c2412-wakeup-eint
|
||||
- samsung,s3c64xx-wakeup-eint
|
||||
- samsung,s5pv210-wakeup-eint
|
||||
- samsung,exynos4210-wakeup-eint
|
||||
- samsung,exynos7-wakeup-eint
|
||||
- samsung,exynosautov920-wakeup-eint
|
||||
- items:
|
||||
- enum:
|
||||
- samsung,exynos5433-wakeup-eint
|
||||
- samsung,exynos7885-wakeup-eint
|
||||
- samsung,exynos850-wakeup-eint
|
||||
- const: samsung,exynos7-wakeup-eint
|
||||
- items:
|
||||
- enum:
|
||||
- google,gs101-wakeup-eint
|
||||
- samsung,exynosautov9-wakeup-eint
|
||||
- const: samsung,exynos850-wakeup-eint
|
||||
- const: samsung,exynos7-wakeup-eint
|
||||
|
||||
interrupts:
|
||||
description:
|
||||
@@ -79,11 +91,14 @@ allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- samsung,s5pv210-wakeup-eint
|
||||
- samsung,exynos4210-wakeup-eint
|
||||
- samsung,exynos7-wakeup-eint
|
||||
# Match without "contains", to skip newer variants which are still
|
||||
# compatible with samsung,exynos7-wakeup-eint
|
||||
enum:
|
||||
- samsung,s5pv210-wakeup-eint
|
||||
- samsung,exynos4210-wakeup-eint
|
||||
- samsung,exynos5433-wakeup-eint
|
||||
- samsung,exynos7-wakeup-eint
|
||||
- samsung,exynos7885-wakeup-eint
|
||||
then:
|
||||
properties:
|
||||
interrupts:
|
||||
@@ -98,7 +113,7 @@ allOf:
|
||||
contains:
|
||||
enum:
|
||||
- samsung,exynos850-wakeup-eint
|
||||
- samsung,exynosautov9-wakeup-eint
|
||||
- samsung,exynosautov920-wakeup-eint
|
||||
then:
|
||||
properties:
|
||||
interrupts: false
|
||||
|
||||
@@ -35,6 +35,7 @@ properties:
|
||||
|
||||
compatible:
|
||||
enum:
|
||||
- google,gs101-pinctrl
|
||||
- samsung,s3c2412-pinctrl
|
||||
- samsung,s3c2416-pinctrl
|
||||
- samsung,s3c2440-pinctrl
|
||||
@@ -53,6 +54,7 @@ properties:
|
||||
- samsung,exynos7885-pinctrl
|
||||
- samsung,exynos850-pinctrl
|
||||
- samsung,exynosautov9-pinctrl
|
||||
- samsung,exynosautov920-pinctrl
|
||||
- tesla,fsd-pinctrl
|
||||
|
||||
interrupts:
|
||||
@@ -313,7 +315,8 @@ examples:
|
||||
pinctrl-0 = <&initial_alive>;
|
||||
|
||||
wakeup-interrupt-controller {
|
||||
compatible = "samsung,exynos7-wakeup-eint";
|
||||
compatible = "samsung,exynos5433-wakeup-eint",
|
||||
"samsung,exynos7-wakeup-eint";
|
||||
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
|
||||
@@ -39,7 +39,7 @@ properties:
|
||||
phandle to the SLCR.
|
||||
|
||||
patternProperties:
|
||||
'^(.*-)?(default|gpio)$':
|
||||
'^(.*-)?(default|gpio-grp)$':
|
||||
type: object
|
||||
patternProperties:
|
||||
'^mux':
|
||||
|
||||
@@ -31,7 +31,7 @@ properties:
|
||||
const: xlnx,zynqmp-pinctrl
|
||||
|
||||
patternProperties:
|
||||
'^(.*-)?(default|gpio)$':
|
||||
'^(.*-)?(default|gpio-grp)$':
|
||||
type: object
|
||||
patternProperties:
|
||||
'^mux':
|
||||
|
||||
@@ -19295,7 +19295,6 @@ R: Alim Akhtar <alim.akhtar@samsung.com>
|
||||
L: linux-samsung-soc@vger.kernel.org
|
||||
S: Maintained
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
|
||||
F: Documentation/devicetree/bindings/clock/samsung,*.yaml
|
||||
F: Documentation/devicetree/bindings/clock/samsung,s3c*
|
||||
F: drivers/clk/samsung/
|
||||
|
||||
@@ -355,7 +355,7 @@ static int ssi_add_controller(struct hsi_controller *ssi,
|
||||
if (!omap_ssi)
|
||||
return -ENOMEM;
|
||||
|
||||
err = ida_simple_get(&platform_omap_ssi_ida, 0, 0, GFP_KERNEL);
|
||||
err = ida_alloc(&platform_omap_ssi_ida, GFP_KERNEL);
|
||||
if (err < 0)
|
||||
return err;
|
||||
ssi->id = err;
|
||||
@@ -417,7 +417,7 @@ static int ssi_add_controller(struct hsi_controller *ssi,
|
||||
return 0;
|
||||
|
||||
out_err:
|
||||
ida_simple_remove(&platform_omap_ssi_ida, ssi->id);
|
||||
ida_free(&platform_omap_ssi_ida, ssi->id);
|
||||
return err;
|
||||
}
|
||||
|
||||
@@ -451,7 +451,7 @@ static void ssi_remove_controller(struct hsi_controller *ssi)
|
||||
tasklet_kill(&omap_ssi->gdd_tasklet);
|
||||
hsi_unregister_controller(ssi);
|
||||
clk_notifier_unregister(omap_ssi->fck, &omap_ssi->fck_nb);
|
||||
ida_simple_remove(&platform_omap_ssi_ida, id);
|
||||
ida_free(&platform_omap_ssi_ida, id);
|
||||
}
|
||||
|
||||
static inline int ssi_of_get_available_ports_count(const struct device_node *np)
|
||||
|
||||
@@ -84,8 +84,9 @@ static DEFINE_MUTEX(hwspinlock_tree_lock);
|
||||
* should decide between spin_trylock, spin_trylock_irq and
|
||||
* spin_trylock_irqsave.
|
||||
*
|
||||
* Returns 0 if we successfully locked the hwspinlock or -EBUSY if
|
||||
* Returns: %0 if we successfully locked the hwspinlock or -EBUSY if
|
||||
* the hwspinlock was already taken.
|
||||
*
|
||||
* This function will never sleep.
|
||||
*/
|
||||
int __hwspin_trylock(struct hwspinlock *hwlock, int mode, unsigned long *flags)
|
||||
@@ -171,7 +172,7 @@ EXPORT_SYMBOL_GPL(__hwspin_trylock);
|
||||
/**
|
||||
* __hwspin_lock_timeout() - lock an hwspinlock with timeout limit
|
||||
* @hwlock: the hwspinlock to be locked
|
||||
* @timeout: timeout value in msecs
|
||||
* @to: timeout value in msecs
|
||||
* @mode: mode which controls whether local interrupts are disabled or not
|
||||
* @flags: a pointer to where the caller's interrupt state will be saved at (if
|
||||
* requested)
|
||||
@@ -199,9 +200,11 @@ EXPORT_SYMBOL_GPL(__hwspin_trylock);
|
||||
* to choose the appropriate @mode of operation, exactly the same way users
|
||||
* should decide between spin_lock, spin_lock_irq and spin_lock_irqsave.
|
||||
*
|
||||
* Returns 0 when the @hwlock was successfully taken, and an appropriate
|
||||
* Returns: %0 when the @hwlock was successfully taken, and an appropriate
|
||||
* error code otherwise (most notably -ETIMEDOUT if the @hwlock is still
|
||||
* busy after @timeout msecs). The function will never sleep.
|
||||
* busy after @timeout msecs).
|
||||
*
|
||||
* The function will never sleep.
|
||||
*/
|
||||
int __hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int to,
|
||||
int mode, unsigned long *flags)
|
||||
@@ -304,13 +307,12 @@ EXPORT_SYMBOL_GPL(__hwspin_unlock);
|
||||
|
||||
/**
|
||||
* of_hwspin_lock_simple_xlate - translate hwlock_spec to return a lock id
|
||||
* @bank: the hwspinlock device bank
|
||||
* @hwlock_spec: hwlock specifier as found in the device tree
|
||||
*
|
||||
* This is a simple translation function, suitable for hwspinlock platform
|
||||
* drivers that only has a lock specifier length of 1.
|
||||
*
|
||||
* Returns a relative index of the lock within a specified bank on success,
|
||||
* Returns: a relative index of the lock within a specified bank on success,
|
||||
* or -EINVAL on invalid specifier cell count.
|
||||
*/
|
||||
static inline int
|
||||
@@ -332,9 +334,10 @@ of_hwspin_lock_simple_xlate(const struct of_phandle_args *hwlock_spec)
|
||||
* hwspinlock device, so that it can be requested using the normal
|
||||
* hwspin_lock_request_specific() API.
|
||||
*
|
||||
* Returns the global lock id number on success, -EPROBE_DEFER if the hwspinlock
|
||||
* device is not yet registered, -EINVAL on invalid args specifier value or an
|
||||
* appropriate error as returned from the OF parsing of the DT client node.
|
||||
* Returns: the global lock id number on success, -EPROBE_DEFER if the
|
||||
* hwspinlock device is not yet registered, -EINVAL on invalid args
|
||||
* specifier value or an appropriate error as returned from the OF parsing
|
||||
* of the DT client node.
|
||||
*/
|
||||
int of_hwspin_lock_get_id(struct device_node *np, int index)
|
||||
{
|
||||
@@ -399,9 +402,10 @@ EXPORT_SYMBOL_GPL(of_hwspin_lock_get_id);
|
||||
* the hwspinlock device, so that it can be requested using the normal
|
||||
* hwspin_lock_request_specific() API.
|
||||
*
|
||||
* Returns the global lock id number on success, -EPROBE_DEFER if the hwspinlock
|
||||
* device is not yet registered, -EINVAL on invalid args specifier value or an
|
||||
* appropriate error as returned from the OF parsing of the DT client node.
|
||||
* Returns: the global lock id number on success, -EPROBE_DEFER if the
|
||||
* hwspinlock device is not yet registered, -EINVAL on invalid args
|
||||
* specifier value or an appropriate error as returned from the OF parsing
|
||||
* of the DT client node.
|
||||
*/
|
||||
int of_hwspin_lock_get_id_byname(struct device_node *np, const char *name)
|
||||
{
|
||||
@@ -481,7 +485,7 @@ out:
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns 0 on success, or an appropriate error code on failure
|
||||
* Returns: %0 on success, or an appropriate error code on failure
|
||||
*/
|
||||
int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev,
|
||||
const struct hwspinlock_ops *ops, int base_id, int num_locks)
|
||||
@@ -529,7 +533,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_register);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns 0 on success, or an appropriate error code on failure
|
||||
* Returns: %0 on success, or an appropriate error code on failure
|
||||
*/
|
||||
int hwspin_lock_unregister(struct hwspinlock_device *bank)
|
||||
{
|
||||
@@ -578,7 +582,7 @@ static int devm_hwspin_lock_device_match(struct device *dev, void *res,
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns 0 on success, or an appropriate error code on failure
|
||||
* Returns: %0 on success, or an appropriate error code on failure
|
||||
*/
|
||||
int devm_hwspin_lock_unregister(struct device *dev,
|
||||
struct hwspinlock_device *bank)
|
||||
@@ -607,7 +611,7 @@ EXPORT_SYMBOL_GPL(devm_hwspin_lock_unregister);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns 0 on success, or an appropriate error code on failure
|
||||
* Returns: %0 on success, or an appropriate error code on failure
|
||||
*/
|
||||
int devm_hwspin_lock_register(struct device *dev,
|
||||
struct hwspinlock_device *bank,
|
||||
@@ -635,12 +639,13 @@ EXPORT_SYMBOL_GPL(devm_hwspin_lock_register);
|
||||
|
||||
/**
|
||||
* __hwspin_lock_request() - tag an hwspinlock as used and power it up
|
||||
* @hwlock: the target hwspinlock
|
||||
*
|
||||
* This is an internal function that prepares an hwspinlock instance
|
||||
* before it is given to the user. The function assumes that
|
||||
* hwspinlock_tree_lock is taken.
|
||||
*
|
||||
* Returns 0 or positive to indicate success, and a negative value to
|
||||
* Returns: %0 or positive to indicate success, and a negative value to
|
||||
* indicate an error (with the appropriate error code)
|
||||
*/
|
||||
static int __hwspin_lock_request(struct hwspinlock *hwlock)
|
||||
@@ -680,7 +685,7 @@ static int __hwspin_lock_request(struct hwspinlock *hwlock)
|
||||
* hwspin_lock_get_id() - retrieve id number of a given hwspinlock
|
||||
* @hwlock: a valid hwspinlock instance
|
||||
*
|
||||
* Returns the id number of a given @hwlock, or -EINVAL if @hwlock is invalid.
|
||||
* Returns: the id number of a given @hwlock, or -EINVAL if @hwlock is invalid.
|
||||
*/
|
||||
int hwspin_lock_get_id(struct hwspinlock *hwlock)
|
||||
{
|
||||
@@ -704,7 +709,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_get_id);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns the address of the assigned hwspinlock, or NULL on error
|
||||
* Returns: the address of the assigned hwspinlock, or %NULL on error
|
||||
*/
|
||||
struct hwspinlock *hwspin_lock_request(void)
|
||||
{
|
||||
@@ -747,7 +752,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_request);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns the address of the assigned hwspinlock, or NULL on error
|
||||
* Returns: the address of the assigned hwspinlock, or %NULL on error
|
||||
*/
|
||||
struct hwspinlock *hwspin_lock_request_specific(unsigned int id)
|
||||
{
|
||||
@@ -795,7 +800,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_request_specific);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns 0 on success, or an appropriate error code on failure
|
||||
* Returns: %0 on success, or an appropriate error code on failure
|
||||
*/
|
||||
int hwspin_lock_free(struct hwspinlock *hwlock)
|
||||
{
|
||||
@@ -865,7 +870,7 @@ static void devm_hwspin_lock_release(struct device *dev, void *res)
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns 0 on success, or an appropriate error code on failure
|
||||
* Returns: %0 on success, or an appropriate error code on failure
|
||||
*/
|
||||
int devm_hwspin_lock_free(struct device *dev, struct hwspinlock *hwlock)
|
||||
{
|
||||
@@ -891,7 +896,7 @@ EXPORT_SYMBOL_GPL(devm_hwspin_lock_free);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns the address of the assigned hwspinlock, or NULL on error
|
||||
* Returns: the address of the assigned hwspinlock, or %NULL on error
|
||||
*/
|
||||
struct hwspinlock *devm_hwspin_lock_request(struct device *dev)
|
||||
{
|
||||
@@ -926,7 +931,7 @@ EXPORT_SYMBOL_GPL(devm_hwspin_lock_request);
|
||||
*
|
||||
* Should be called from a process context (might sleep)
|
||||
*
|
||||
* Returns the address of the assigned hwspinlock, or NULL on error
|
||||
* Returns: the address of the assigned hwspinlock, or %NULL on error
|
||||
*/
|
||||
struct hwspinlock *devm_hwspin_lock_request_specific(struct device *dev,
|
||||
unsigned int id)
|
||||
|
||||
@@ -115,7 +115,6 @@ static const struct of_device_id qcom_hwspinlock_of_match[] = {
|
||||
{ .compatible = "qcom,sfpb-mutex", .data = &of_sfpb_mutex },
|
||||
{ .compatible = "qcom,tcsr-mutex", .data = &of_tcsr_mutex },
|
||||
{ .compatible = "qcom,apq8084-tcsr-mutex", .data = &of_msm8226_tcsr_mutex },
|
||||
{ .compatible = "qcom,ipq6018-tcsr-mutex", .data = &of_msm8226_tcsr_mutex },
|
||||
{ .compatible = "qcom,msm8226-tcsr-mutex", .data = &of_msm8226_tcsr_mutex },
|
||||
{ .compatible = "qcom,msm8974-tcsr-mutex", .data = &of_msm8226_tcsr_mutex },
|
||||
{ .compatible = "qcom,msm8994-tcsr-mutex", .data = &of_msm8226_tcsr_mutex },
|
||||
|
||||
+30
-5
@@ -95,14 +95,18 @@ config LEDS_ARIEL
|
||||
Say Y to if your machine is a Dell Wyse 3020 thin client.
|
||||
|
||||
config LEDS_AW200XX
|
||||
tristate "LED support for Awinic AW20036/AW20054/AW20072"
|
||||
tristate "LED support for Awinic AW20036/AW20054/AW20072/AW20108"
|
||||
depends on LEDS_CLASS
|
||||
depends on I2C
|
||||
help
|
||||
This option enables support for the AW20036/AW20054/AW20072 LED driver.
|
||||
It is a 3x12/6x9/6x12 matrix LED driver programmed via
|
||||
an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
|
||||
3 pattern controllers for auto breathing or group dimming control.
|
||||
This option enables support for the Awinic AW200XX LED controllers.
|
||||
It is a matrix LED driver programmed via an I2C interface. Devices have
|
||||
a set of individually controlled LEDs and support 3 pattern controllers
|
||||
for auto breathing or group dimming control. Supported devices:
|
||||
- AW20036 (3x12) 36 LEDs
|
||||
- AW20054 (6x9) 54 LEDs
|
||||
- AW20072 (6x12) 72 LEDs
|
||||
- AW20108 (9x12) 108 LEDs
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called leds-aw200xx.
|
||||
@@ -110,6 +114,7 @@ config LEDS_AW200XX
|
||||
config LEDS_AW2013
|
||||
tristate "LED support for Awinic AW2013"
|
||||
depends on LEDS_CLASS && I2C && OF
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This option enables support for the AW2013 3-channel
|
||||
LED driver.
|
||||
@@ -298,6 +303,15 @@ config LEDS_COBALT_RAQ
|
||||
help
|
||||
This option enables support for the Cobalt Raq series LEDs.
|
||||
|
||||
config LEDS_SUN50I_A100
|
||||
tristate "LED support for Allwinner A100 RGB LED controller"
|
||||
depends on LEDS_CLASS_MULTICOLOR
|
||||
depends on ARCH_SUNXI || COMPILE_TEST
|
||||
help
|
||||
This option enables support for the RGB LED controller found
|
||||
in some Allwinner sunxi SoCs, including A100, R329, and D1.
|
||||
It uses a one-wire interface to control up to 1024 LEDs.
|
||||
|
||||
config LEDS_SUNFIRE
|
||||
tristate "LED support for SunFire servers."
|
||||
depends on LEDS_CLASS
|
||||
@@ -638,6 +652,17 @@ config LEDS_ADP5520
|
||||
To compile this driver as a module, choose M here: the module will
|
||||
be called leds-adp5520.
|
||||
|
||||
config LEDS_MAX5970
|
||||
tristate "LED Support for Maxim 5970"
|
||||
depends on LEDS_CLASS
|
||||
depends on MFD_MAX5970
|
||||
help
|
||||
This option enables support for the Maxim MAX5970 & MAX5978 smart
|
||||
switch indication LEDs via the I2C bus.
|
||||
|
||||
To compile this driver as a module, choose M here: the module will
|
||||
be called leds-max5970.
|
||||
|
||||
config LEDS_MC13783
|
||||
tristate "LED Support for MC13XXX PMIC"
|
||||
depends on LEDS_CLASS
|
||||
|
||||
@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
|
||||
obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
|
||||
obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
|
||||
obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
|
||||
obj-$(CONFIG_LEDS_MAX5970) += leds-max5970.o
|
||||
obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o
|
||||
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
|
||||
obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
|
||||
@@ -78,6 +79,7 @@ obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o
|
||||
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
|
||||
obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
|
||||
obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
|
||||
obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o
|
||||
obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o
|
||||
obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
|
||||
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
|
||||
|
||||
@@ -269,19 +269,6 @@ void led_trigger_set_default(struct led_classdev *led_cdev)
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(led_trigger_set_default);
|
||||
|
||||
void led_trigger_rename_static(const char *name, struct led_trigger *trig)
|
||||
{
|
||||
/* new name must be on a temporary string to prevent races */
|
||||
BUG_ON(name == trig->name);
|
||||
|
||||
down_write(&triggers_list_lock);
|
||||
/* this assumes that trig->name was originaly allocated to
|
||||
* non constant storage */
|
||||
strcpy((char *)trig->name, name);
|
||||
up_write(&triggers_list_lock);
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(led_trigger_rename_static);
|
||||
|
||||
/* LED Trigger Interface */
|
||||
|
||||
int led_trigger_register(struct led_trigger *trig)
|
||||
|
||||
+83
-15
@@ -1,6 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Awinic AW20036/AW20054/AW20072 LED driver
|
||||
* Awinic AW20036/AW20054/AW20072/AW20108 LED driver
|
||||
*
|
||||
* Copyright (c) 2023, SberDevices. All Rights Reserved.
|
||||
*
|
||||
@@ -10,6 +10,7 @@
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/bits.h>
|
||||
#include <linux/container_of.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
@@ -74,6 +75,10 @@
|
||||
#define AW200XX_LED2REG(x, columns) \
|
||||
((x) + (((x) / (columns)) * (AW200XX_DSIZE_COLUMNS_MAX - (columns))))
|
||||
|
||||
/* DIM current configuration register on page 1 */
|
||||
#define AW200XX_REG_DIM_PAGE1(x, columns) \
|
||||
AW200XX_REG(AW200XX_PAGE1, AW200XX_LED2REG(x, columns))
|
||||
|
||||
/*
|
||||
* DIM current configuration register (page 4).
|
||||
* The even address for current DIM configuration.
|
||||
@@ -82,6 +87,8 @@
|
||||
#define AW200XX_REG_DIM(x, columns) \
|
||||
AW200XX_REG(AW200XX_PAGE4, AW200XX_LED2REG(x, columns) * 2)
|
||||
#define AW200XX_REG_DIM2FADE(x) ((x) + 1)
|
||||
#define AW200XX_REG_FADE2DIM(fade) \
|
||||
DIV_ROUND_UP((fade) * AW200XX_DIM_MAX, AW200XX_FADE_MAX)
|
||||
|
||||
/*
|
||||
* Duty ratio of display scan (see p.15 of datasheet for formula):
|
||||
@@ -112,6 +119,7 @@ struct aw200xx {
|
||||
struct mutex mutex;
|
||||
u32 num_leds;
|
||||
u32 display_rows;
|
||||
struct gpio_desc *hwen;
|
||||
struct aw200xx_led leds[] __counted_by(num_leds);
|
||||
};
|
||||
|
||||
@@ -153,7 +161,8 @@ static ssize_t dim_store(struct device *dev, struct device_attribute *devattr,
|
||||
|
||||
if (dim >= 0) {
|
||||
ret = regmap_write(chip->regmap,
|
||||
AW200XX_REG_DIM(led->num, columns), dim);
|
||||
AW200XX_REG_DIM_PAGE1(led->num, columns),
|
||||
dim);
|
||||
if (ret)
|
||||
goto out_unlock;
|
||||
}
|
||||
@@ -188,9 +197,7 @@ static int aw200xx_brightness_set(struct led_classdev *cdev,
|
||||
|
||||
dim = led->dim;
|
||||
if (dim < 0)
|
||||
dim = max_t(int,
|
||||
brightness / (AW200XX_FADE_MAX / AW200XX_DIM_MAX),
|
||||
1);
|
||||
dim = AW200XX_REG_FADE2DIM(brightness);
|
||||
|
||||
ret = regmap_write(chip->regmap, reg, dim);
|
||||
if (ret)
|
||||
@@ -314,6 +321,9 @@ static int aw200xx_chip_reset(const struct aw200xx *const chip)
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* According to the datasheet software reset takes at least 1ms */
|
||||
fsleep(1000);
|
||||
|
||||
regcache_mark_dirty(chip->regmap);
|
||||
return regmap_write(chip->regmap, AW200XX_REG_FCD, AW200XX_FCD_CLEAR);
|
||||
}
|
||||
@@ -353,6 +363,50 @@ static int aw200xx_chip_check(const struct aw200xx *const chip)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void aw200xx_enable(const struct aw200xx *const chip)
|
||||
{
|
||||
gpiod_set_value_cansleep(chip->hwen, 1);
|
||||
|
||||
/*
|
||||
* After HWEN pin set high the chip begins to load the OTP information,
|
||||
* which takes 200us to complete. About 200us wait time is needed for
|
||||
* internal oscillator startup and display SRAM initialization. After
|
||||
* display SRAM initialization, the registers in page1 to page5 can be
|
||||
* configured via i2c interface.
|
||||
*/
|
||||
fsleep(400);
|
||||
}
|
||||
|
||||
static void aw200xx_disable(const struct aw200xx *const chip)
|
||||
{
|
||||
return gpiod_set_value_cansleep(chip->hwen, 0);
|
||||
}
|
||||
|
||||
static int aw200xx_probe_get_display_rows(struct device *dev,
|
||||
struct aw200xx *chip)
|
||||
{
|
||||
struct fwnode_handle *child;
|
||||
u32 max_source = 0;
|
||||
|
||||
device_for_each_child_node(dev, child) {
|
||||
u32 source;
|
||||
int ret;
|
||||
|
||||
ret = fwnode_property_read_u32(child, "reg", &source);
|
||||
if (ret || source >= chip->cdef->channels)
|
||||
continue;
|
||||
|
||||
max_source = max(max_source, source);
|
||||
}
|
||||
|
||||
if (max_source == 0)
|
||||
return -EINVAL;
|
||||
|
||||
chip->display_rows = max_source / chip->cdef->display_size_columns + 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
|
||||
{
|
||||
struct fwnode_handle *child;
|
||||
@@ -360,18 +414,10 @@ static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
ret = device_property_read_u32(dev, "awinic,display-rows",
|
||||
&chip->display_rows);
|
||||
ret = aw200xx_probe_get_display_rows(dev, chip);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret,
|
||||
"Failed to read 'display-rows' property\n");
|
||||
|
||||
if (!chip->display_rows ||
|
||||
chip->display_rows > chip->cdef->display_size_rows_max) {
|
||||
return dev_err_probe(dev, -EINVAL,
|
||||
"Invalid leds display size %u\n",
|
||||
chip->display_rows);
|
||||
}
|
||||
"No valid led definitions found\n");
|
||||
|
||||
current_max = aw200xx_imax_from_global(chip, AW200XX_IMAX_MAX_uA);
|
||||
current_min = aw200xx_imax_from_global(chip, AW200XX_IMAX_MIN_uA);
|
||||
@@ -416,6 +462,7 @@ static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
|
||||
led->num = source;
|
||||
led->chip = chip;
|
||||
led->cdev.brightness_set_blocking = aw200xx_brightness_set;
|
||||
led->cdev.max_brightness = AW200XX_FADE_MAX;
|
||||
led->cdev.groups = dim_groups;
|
||||
init_data.fwnode = child;
|
||||
|
||||
@@ -480,6 +527,7 @@ static const struct regmap_config aw200xx_regmap_config = {
|
||||
.rd_table = &aw200xx_readable_table,
|
||||
.wr_table = &aw200xx_writeable_table,
|
||||
.cache_type = REGCACHE_MAPLE,
|
||||
.disable_locking = true,
|
||||
};
|
||||
|
||||
static int aw200xx_probe(struct i2c_client *client)
|
||||
@@ -512,6 +560,14 @@ static int aw200xx_probe(struct i2c_client *client)
|
||||
if (IS_ERR(chip->regmap))
|
||||
return PTR_ERR(chip->regmap);
|
||||
|
||||
chip->hwen = devm_gpiod_get_optional(&client->dev, "enable",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(chip->hwen))
|
||||
return dev_err_probe(&client->dev, PTR_ERR(chip->hwen),
|
||||
"Cannot get enable GPIO");
|
||||
|
||||
aw200xx_enable(chip);
|
||||
|
||||
ret = aw200xx_chip_check(chip);
|
||||
if (ret)
|
||||
return ret;
|
||||
@@ -532,6 +588,9 @@ static int aw200xx_probe(struct i2c_client *client)
|
||||
ret = aw200xx_chip_init(chip);
|
||||
|
||||
out_unlock:
|
||||
if (ret)
|
||||
aw200xx_disable(chip);
|
||||
|
||||
mutex_unlock(&chip->mutex);
|
||||
return ret;
|
||||
}
|
||||
@@ -541,6 +600,7 @@ static void aw200xx_remove(struct i2c_client *client)
|
||||
struct aw200xx *chip = i2c_get_clientdata(client);
|
||||
|
||||
aw200xx_chip_reset(chip);
|
||||
aw200xx_disable(chip);
|
||||
mutex_destroy(&chip->mutex);
|
||||
}
|
||||
|
||||
@@ -562,10 +622,17 @@ static const struct aw200xx_chipdef aw20072_cdef = {
|
||||
.display_size_columns = 12,
|
||||
};
|
||||
|
||||
static const struct aw200xx_chipdef aw20108_cdef = {
|
||||
.channels = 108,
|
||||
.display_size_rows_max = 9,
|
||||
.display_size_columns = 12,
|
||||
};
|
||||
|
||||
static const struct i2c_device_id aw200xx_id[] = {
|
||||
{ "aw20036" },
|
||||
{ "aw20054" },
|
||||
{ "aw20072" },
|
||||
{ "aw20108" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, aw200xx_id);
|
||||
@@ -574,6 +641,7 @@ static const struct of_device_id aw200xx_match_table[] = {
|
||||
{ .compatible = "awinic,aw20036", .data = &aw20036_cdef, },
|
||||
{ .compatible = "awinic,aw20054", .data = &aw20054_cdef, },
|
||||
{ .compatible = "awinic,aw20072", .data = &aw20072_cdef, },
|
||||
{ .compatible = "awinic,aw20108", .data = &aw20108_cdef, },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, aw200xx_match_table);
|
||||
|
||||
@@ -172,6 +172,8 @@ static struct gpio_leds_priv *gpio_leds_create(struct device *dev)
|
||||
led.gpiod = devm_fwnode_gpiod_get(dev, child, NULL, GPIOD_ASIS,
|
||||
NULL);
|
||||
if (IS_ERR(led.gpiod)) {
|
||||
dev_err_probe(dev, PTR_ERR(led.gpiod), "Failed to get GPIO '%pfw'\n",
|
||||
child);
|
||||
fwnode_handle_put(child);
|
||||
return ERR_CAST(led.gpiod);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,111 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device driver for leds in MAX5970 and MAX5978 IC
|
||||
*
|
||||
* Copyright (c) 2022 9elements GmbH
|
||||
*
|
||||
* Author: Patrick Rudolph <patrick.rudolph@9elements.com>
|
||||
*/
|
||||
|
||||
#include <linux/bits.h>
|
||||
#include <linux/container_of.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/mfd/max5970.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#define ldev_to_maxled(c) container_of(c, struct max5970_led, cdev)
|
||||
|
||||
struct max5970_led {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
struct led_classdev cdev;
|
||||
unsigned int index;
|
||||
};
|
||||
|
||||
static int max5970_led_set_brightness(struct led_classdev *cdev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct max5970_led *ddata = ldev_to_maxled(cdev);
|
||||
int ret, val;
|
||||
|
||||
/* Set/clear corresponding bit for given led index */
|
||||
val = !brightness ? BIT(ddata->index) : 0;
|
||||
|
||||
ret = regmap_update_bits(ddata->regmap, MAX5970_REG_LED_FLASH, BIT(ddata->index), val);
|
||||
if (ret < 0)
|
||||
dev_err(cdev->dev, "failed to set brightness %d", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max5970_led_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct fwnode_handle *led_node, *child;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct regmap *regmap;
|
||||
struct max5970_led *ddata;
|
||||
int ret = -ENODEV;
|
||||
|
||||
regmap = dev_get_regmap(dev->parent, NULL);
|
||||
if (!regmap)
|
||||
return -ENODEV;
|
||||
|
||||
led_node = device_get_named_child_node(dev->parent, "leds");
|
||||
if (!led_node)
|
||||
return -ENODEV;
|
||||
|
||||
fwnode_for_each_available_child_node(led_node, child) {
|
||||
u32 reg;
|
||||
|
||||
if (fwnode_property_read_u32(child, "reg", ®))
|
||||
continue;
|
||||
|
||||
if (reg >= MAX5970_NUM_LEDS) {
|
||||
dev_err_probe(dev, -EINVAL, "invalid LED (%u >= %d)\n", reg, MAX5970_NUM_LEDS);
|
||||
continue;
|
||||
}
|
||||
|
||||
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
|
||||
if (!ddata) {
|
||||
fwnode_handle_put(child);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
ddata->index = reg;
|
||||
ddata->regmap = regmap;
|
||||
ddata->dev = dev;
|
||||
|
||||
if (fwnode_property_read_string(child, "label", &ddata->cdev.name))
|
||||
ddata->cdev.name = fwnode_get_name(child);
|
||||
|
||||
ddata->cdev.max_brightness = 1;
|
||||
ddata->cdev.brightness_set_blocking = max5970_led_set_brightness;
|
||||
ddata->cdev.default_trigger = "none";
|
||||
|
||||
ret = devm_led_classdev_register(dev, &ddata->cdev);
|
||||
if (ret < 0) {
|
||||
fwnode_handle_put(child);
|
||||
return dev_err_probe(dev, ret, "Failed to initialize LED %u\n", reg);
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct platform_driver max5970_led_driver = {
|
||||
.driver = {
|
||||
.name = "max5970-led",
|
||||
},
|
||||
.probe = max5970_led_probe,
|
||||
};
|
||||
module_platform_driver(max5970_led_driver);
|
||||
|
||||
MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
|
||||
MODULE_AUTHOR("Naresh Solanki <Naresh.Solanki@9elements.com>");
|
||||
MODULE_DESCRIPTION("MAX5970_hot-swap controller LED driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
@@ -0,0 +1,584 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2021-2023 Samuel Holland <samuel@sholland.org>
|
||||
*
|
||||
* Partly based on drivers/leds/leds-turris-omnia.c, which is:
|
||||
* Copyright (c) 2020 by Marek Behún <kabel@kernel.org>
|
||||
*/
|
||||
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/dmaengine.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/led-class-multicolor.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/mod_devicetable.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/property.h>
|
||||
#include <linux/reset.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#define LEDC_CTRL_REG 0x0000
|
||||
#define LEDC_CTRL_REG_DATA_LENGTH GENMASK(28, 16)
|
||||
#define LEDC_CTRL_REG_RGB_MODE GENMASK(8, 6)
|
||||
#define LEDC_CTRL_REG_LEDC_EN BIT(0)
|
||||
#define LEDC_T01_TIMING_CTRL_REG 0x0004
|
||||
#define LEDC_T01_TIMING_CTRL_REG_T1H GENMASK(26, 21)
|
||||
#define LEDC_T01_TIMING_CTRL_REG_T1L GENMASK(20, 16)
|
||||
#define LEDC_T01_TIMING_CTRL_REG_T0H GENMASK(10, 6)
|
||||
#define LEDC_T01_TIMING_CTRL_REG_T0L GENMASK(5, 0)
|
||||
#define LEDC_RESET_TIMING_CTRL_REG 0x000c
|
||||
#define LEDC_RESET_TIMING_CTRL_REG_TR GENMASK(28, 16)
|
||||
#define LEDC_RESET_TIMING_CTRL_REG_LED_NUM GENMASK(9, 0)
|
||||
#define LEDC_DATA_REG 0x0014
|
||||
#define LEDC_DMA_CTRL_REG 0x0018
|
||||
#define LEDC_DMA_CTRL_REG_DMA_EN BIT(5)
|
||||
#define LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL GENMASK(4, 0)
|
||||
#define LEDC_INT_CTRL_REG 0x001c
|
||||
#define LEDC_INT_CTRL_REG_GLOBAL_INT_EN BIT(5)
|
||||
#define LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN BIT(1)
|
||||
#define LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN BIT(0)
|
||||
#define LEDC_INT_STS_REG 0x0020
|
||||
#define LEDC_INT_STS_REG_FIFO_WLW GENMASK(15, 10)
|
||||
#define LEDC_INT_STS_REG_FIFO_CPUREQ_INT BIT(1)
|
||||
#define LEDC_INT_STS_REG_TRANS_FINISH_INT BIT(0)
|
||||
|
||||
#define LEDC_FIFO_DEPTH 32U
|
||||
#define LEDC_MAX_LEDS 1024
|
||||
#define LEDC_CHANNELS_PER_LED 3 /* RGB */
|
||||
|
||||
#define LEDS_TO_BYTES(n) ((n) * sizeof(u32))
|
||||
|
||||
struct sun50i_a100_ledc_led {
|
||||
struct led_classdev_mc mc_cdev;
|
||||
struct mc_subled subled_info[LEDC_CHANNELS_PER_LED];
|
||||
u32 addr;
|
||||
};
|
||||
|
||||
#define to_ledc_led(mc) container_of(mc, struct sun50i_a100_ledc_led, mc_cdev)
|
||||
|
||||
struct sun50i_a100_ledc_timing {
|
||||
u32 t0h_ns;
|
||||
u32 t0l_ns;
|
||||
u32 t1h_ns;
|
||||
u32 t1l_ns;
|
||||
u32 treset_ns;
|
||||
};
|
||||
|
||||
struct sun50i_a100_ledc {
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
struct clk *bus_clk;
|
||||
struct clk *mod_clk;
|
||||
struct reset_control *reset;
|
||||
|
||||
u32 *buffer;
|
||||
struct dma_chan *dma_chan;
|
||||
dma_addr_t dma_handle;
|
||||
unsigned int pio_length;
|
||||
unsigned int pio_offset;
|
||||
|
||||
spinlock_t lock;
|
||||
unsigned int next_length;
|
||||
bool xfer_active;
|
||||
|
||||
u32 format;
|
||||
struct sun50i_a100_ledc_timing timing;
|
||||
|
||||
u32 max_addr;
|
||||
u32 num_leds;
|
||||
struct sun50i_a100_ledc_led leds[] __counted_by(num_leds);
|
||||
};
|
||||
|
||||
static int sun50i_a100_ledc_dma_xfer(struct sun50i_a100_ledc *priv, unsigned int length)
|
||||
{
|
||||
struct dma_async_tx_descriptor *desc;
|
||||
dma_cookie_t cookie;
|
||||
|
||||
desc = dmaengine_prep_slave_single(priv->dma_chan, priv->dma_handle,
|
||||
LEDS_TO_BYTES(length), DMA_MEM_TO_DEV, 0);
|
||||
if (!desc)
|
||||
return -ENOMEM;
|
||||
|
||||
cookie = dmaengine_submit(desc);
|
||||
if (dma_submit_error(cookie))
|
||||
return -EIO;
|
||||
|
||||
dma_async_issue_pending(priv->dma_chan);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_pio_xfer(struct sun50i_a100_ledc *priv, unsigned int fifo_used)
|
||||
{
|
||||
unsigned int burst, length, offset;
|
||||
u32 control;
|
||||
|
||||
length = priv->pio_length;
|
||||
offset = priv->pio_offset;
|
||||
burst = min(length, LEDC_FIFO_DEPTH - fifo_used);
|
||||
|
||||
iowrite32_rep(priv->base + LEDC_DATA_REG, priv->buffer + offset, burst);
|
||||
|
||||
if (burst < length) {
|
||||
priv->pio_length = length - burst;
|
||||
priv->pio_offset = offset + burst;
|
||||
|
||||
if (!offset) {
|
||||
control = readl(priv->base + LEDC_INT_CTRL_REG);
|
||||
control |= LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
|
||||
writel(control, priv->base + LEDC_INT_CTRL_REG);
|
||||
}
|
||||
} else {
|
||||
/* Disable the request IRQ once all data is written. */
|
||||
control = readl(priv->base + LEDC_INT_CTRL_REG);
|
||||
control &= ~LEDC_INT_CTRL_REG_FIFO_CPUREQ_INT_EN;
|
||||
writel(control, priv->base + LEDC_INT_CTRL_REG);
|
||||
}
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_start_xfer(struct sun50i_a100_ledc *priv, unsigned int length)
|
||||
{
|
||||
bool use_dma = false;
|
||||
u32 control;
|
||||
|
||||
if (priv->dma_chan && length > LEDC_FIFO_DEPTH) {
|
||||
int ret;
|
||||
|
||||
ret = sun50i_a100_ledc_dma_xfer(priv, length);
|
||||
if (ret)
|
||||
dev_warn(priv->dev, "Failed to set up DMA (%d), using PIO\n", ret);
|
||||
else
|
||||
use_dma = true;
|
||||
}
|
||||
|
||||
/* The DMA trigger level must be at least the burst length. */
|
||||
control = FIELD_PREP(LEDC_DMA_CTRL_REG_DMA_EN, use_dma) |
|
||||
FIELD_PREP_CONST(LEDC_DMA_CTRL_REG_FIFO_TRIG_LEVEL, LEDC_FIFO_DEPTH / 2);
|
||||
writel(control, priv->base + LEDC_DMA_CTRL_REG);
|
||||
|
||||
control = readl(priv->base + LEDC_CTRL_REG);
|
||||
control &= ~LEDC_CTRL_REG_DATA_LENGTH;
|
||||
control |= FIELD_PREP(LEDC_CTRL_REG_DATA_LENGTH, length) | LEDC_CTRL_REG_LEDC_EN;
|
||||
writel(control, priv->base + LEDC_CTRL_REG);
|
||||
|
||||
if (!use_dma) {
|
||||
/* The FIFO is empty when starting a new transfer. */
|
||||
unsigned int fifo_used = 0;
|
||||
|
||||
priv->pio_length = length;
|
||||
priv->pio_offset = 0;
|
||||
|
||||
sun50i_a100_ledc_pio_xfer(priv, fifo_used);
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t sun50i_a100_ledc_irq(int irq, void *data)
|
||||
{
|
||||
struct sun50i_a100_ledc *priv = data;
|
||||
u32 status;
|
||||
|
||||
status = readl(priv->base + LEDC_INT_STS_REG);
|
||||
|
||||
if (status & LEDC_INT_STS_REG_TRANS_FINISH_INT) {
|
||||
unsigned int next_length;
|
||||
|
||||
spin_lock(&priv->lock);
|
||||
|
||||
/* If another transfer is queued, dequeue and start it. */
|
||||
next_length = priv->next_length;
|
||||
if (next_length)
|
||||
priv->next_length = 0;
|
||||
else
|
||||
priv->xfer_active = false;
|
||||
|
||||
spin_unlock(&priv->lock);
|
||||
|
||||
if (next_length)
|
||||
sun50i_a100_ledc_start_xfer(priv, next_length);
|
||||
} else if (status & LEDC_INT_STS_REG_FIFO_CPUREQ_INT) {
|
||||
/* Continue the current transfer. */
|
||||
sun50i_a100_ledc_pio_xfer(priv, FIELD_GET(LEDC_INT_STS_REG_FIFO_WLW, status));
|
||||
}
|
||||
|
||||
/* Clear the W1C status bits. */
|
||||
writel(status, priv->base + LEDC_INT_STS_REG);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_brightness_set(struct led_classdev *cdev,
|
||||
enum led_brightness brightness)
|
||||
{
|
||||
struct sun50i_a100_ledc *priv = dev_get_drvdata(cdev->dev->parent);
|
||||
struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
|
||||
struct sun50i_a100_ledc_led *led = to_ledc_led(mc_cdev);
|
||||
unsigned int next_length;
|
||||
unsigned long flags;
|
||||
bool xfer_active;
|
||||
|
||||
led_mc_calc_color_components(mc_cdev, brightness);
|
||||
|
||||
priv->buffer[led->addr] = led->subled_info[0].brightness << 16 |
|
||||
led->subled_info[1].brightness << 8 |
|
||||
led->subled_info[2].brightness;
|
||||
|
||||
spin_lock_irqsave(&priv->lock, flags);
|
||||
|
||||
/* Start, enqueue, or extend an enqueued transfer, as appropriate. */
|
||||
next_length = max(priv->next_length, led->addr + 1);
|
||||
xfer_active = priv->xfer_active;
|
||||
if (xfer_active)
|
||||
priv->next_length = next_length;
|
||||
else
|
||||
priv->xfer_active = true;
|
||||
|
||||
spin_unlock_irqrestore(&priv->lock, flags);
|
||||
|
||||
if (!xfer_active)
|
||||
sun50i_a100_ledc_start_xfer(priv, next_length);
|
||||
}
|
||||
|
||||
static const char *const sun50i_a100_ledc_formats[] = {
|
||||
"rgb", "rbg", "grb", "gbr", "brg", "bgr",
|
||||
};
|
||||
|
||||
static int sun50i_a100_ledc_parse_format(struct device *dev,
|
||||
struct sun50i_a100_ledc *priv)
|
||||
{
|
||||
const char *format = "grb";
|
||||
u32 i;
|
||||
|
||||
device_property_read_string(dev, "allwinner,pixel-format", &format);
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(sun50i_a100_ledc_formats); i++) {
|
||||
if (!strcmp(format, sun50i_a100_ledc_formats[i])) {
|
||||
priv->format = i;
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
return dev_err_probe(dev, -EINVAL, "Bad pixel format '%s'\n", format);
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_set_format(struct sun50i_a100_ledc *priv)
|
||||
{
|
||||
u32 control;
|
||||
|
||||
control = readl(priv->base + LEDC_CTRL_REG);
|
||||
control &= ~LEDC_CTRL_REG_RGB_MODE;
|
||||
control |= FIELD_PREP(LEDC_CTRL_REG_RGB_MODE, priv->format);
|
||||
writel(control, priv->base + LEDC_CTRL_REG);
|
||||
}
|
||||
|
||||
static const struct sun50i_a100_ledc_timing sun50i_a100_ledc_default_timing = {
|
||||
.t0h_ns = 336,
|
||||
.t0l_ns = 840,
|
||||
.t1h_ns = 882,
|
||||
.t1l_ns = 294,
|
||||
.treset_ns = 300000,
|
||||
};
|
||||
|
||||
static int sun50i_a100_ledc_parse_timing(struct device *dev,
|
||||
struct sun50i_a100_ledc *priv)
|
||||
{
|
||||
struct sun50i_a100_ledc_timing *timing = &priv->timing;
|
||||
|
||||
*timing = sun50i_a100_ledc_default_timing;
|
||||
|
||||
device_property_read_u32(dev, "allwinner,t0h-ns", &timing->t0h_ns);
|
||||
device_property_read_u32(dev, "allwinner,t0l-ns", &timing->t0l_ns);
|
||||
device_property_read_u32(dev, "allwinner,t1h-ns", &timing->t1h_ns);
|
||||
device_property_read_u32(dev, "allwinner,t1l-ns", &timing->t1l_ns);
|
||||
device_property_read_u32(dev, "allwinner,treset-ns", &timing->treset_ns);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_set_timing(struct sun50i_a100_ledc *priv)
|
||||
{
|
||||
const struct sun50i_a100_ledc_timing *timing = &priv->timing;
|
||||
unsigned long mod_freq = clk_get_rate(priv->mod_clk);
|
||||
u32 cycle_ns;
|
||||
u32 control;
|
||||
|
||||
if (!mod_freq)
|
||||
return;
|
||||
|
||||
cycle_ns = NSEC_PER_SEC / mod_freq;
|
||||
control = FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T1H, timing->t1h_ns / cycle_ns) |
|
||||
FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T1L, timing->t1l_ns / cycle_ns) |
|
||||
FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T0H, timing->t0h_ns / cycle_ns) |
|
||||
FIELD_PREP(LEDC_T01_TIMING_CTRL_REG_T0L, timing->t0l_ns / cycle_ns);
|
||||
writel(control, priv->base + LEDC_T01_TIMING_CTRL_REG);
|
||||
|
||||
control = FIELD_PREP(LEDC_RESET_TIMING_CTRL_REG_TR, timing->treset_ns / cycle_ns) |
|
||||
FIELD_PREP(LEDC_RESET_TIMING_CTRL_REG_LED_NUM, priv->max_addr);
|
||||
writel(control, priv->base + LEDC_RESET_TIMING_CTRL_REG);
|
||||
}
|
||||
|
||||
static int sun50i_a100_ledc_resume(struct device *dev)
|
||||
{
|
||||
struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = reset_control_deassert(priv->reset);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = clk_prepare_enable(priv->bus_clk);
|
||||
if (ret)
|
||||
goto err_assert_reset;
|
||||
|
||||
ret = clk_prepare_enable(priv->mod_clk);
|
||||
if (ret)
|
||||
goto err_disable_bus_clk;
|
||||
|
||||
sun50i_a100_ledc_set_format(priv);
|
||||
sun50i_a100_ledc_set_timing(priv);
|
||||
|
||||
writel(LEDC_INT_CTRL_REG_GLOBAL_INT_EN | LEDC_INT_CTRL_REG_TRANS_FINISH_INT_EN,
|
||||
priv->base + LEDC_INT_CTRL_REG);
|
||||
|
||||
return 0;
|
||||
|
||||
err_disable_bus_clk:
|
||||
clk_disable_unprepare(priv->bus_clk);
|
||||
err_assert_reset:
|
||||
reset_control_assert(priv->reset);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sun50i_a100_ledc_suspend(struct device *dev)
|
||||
{
|
||||
struct sun50i_a100_ledc *priv = dev_get_drvdata(dev);
|
||||
|
||||
/* Wait for all transfers to complete. */
|
||||
for (;;) {
|
||||
unsigned long flags;
|
||||
bool xfer_active;
|
||||
|
||||
spin_lock_irqsave(&priv->lock, flags);
|
||||
xfer_active = priv->xfer_active;
|
||||
spin_unlock_irqrestore(&priv->lock, flags);
|
||||
if (!xfer_active)
|
||||
break;
|
||||
|
||||
msleep(1);
|
||||
}
|
||||
|
||||
clk_disable_unprepare(priv->mod_clk);
|
||||
clk_disable_unprepare(priv->bus_clk);
|
||||
reset_control_assert(priv->reset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_dma_cleanup(void *data)
|
||||
{
|
||||
struct sun50i_a100_ledc *priv = data;
|
||||
|
||||
dma_release_channel(priv->dma_chan);
|
||||
}
|
||||
|
||||
static int sun50i_a100_ledc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct dma_slave_config dma_cfg = {};
|
||||
struct led_init_data init_data = {};
|
||||
struct sun50i_a100_ledc_led *led;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct sun50i_a100_ledc *priv;
|
||||
struct fwnode_handle *child;
|
||||
struct resource *mem;
|
||||
u32 max_addr = 0;
|
||||
u32 num_leds = 0;
|
||||
int irq, ret;
|
||||
|
||||
/*
|
||||
* The maximum LED address must be known in sun50i_a100_ledc_resume() before
|
||||
* class device registration, so parse and validate the subnodes up front.
|
||||
*/
|
||||
device_for_each_child_node(dev, child) {
|
||||
u32 addr, color;
|
||||
|
||||
ret = fwnode_property_read_u32(child, "reg", &addr);
|
||||
if (ret || addr >= LEDC_MAX_LEDS) {
|
||||
fwnode_handle_put(child);
|
||||
return dev_err_probe(dev, -EINVAL, "'reg' must be between 0 and %d\n",
|
||||
LEDC_MAX_LEDS - 1);
|
||||
}
|
||||
|
||||
ret = fwnode_property_read_u32(child, "color", &color);
|
||||
if (ret || color != LED_COLOR_ID_RGB) {
|
||||
fwnode_handle_put(child);
|
||||
return dev_err_probe(dev, -EINVAL, "'color' must be LED_COLOR_ID_RGB\n");
|
||||
}
|
||||
|
||||
max_addr = max(max_addr, addr);
|
||||
num_leds++;
|
||||
}
|
||||
|
||||
if (!num_leds)
|
||||
return -ENODEV;
|
||||
|
||||
priv = devm_kzalloc(dev, struct_size(priv, leds, num_leds), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->dev = dev;
|
||||
priv->max_addr = max_addr;
|
||||
priv->num_leds = num_leds;
|
||||
spin_lock_init(&priv->lock);
|
||||
dev_set_drvdata(dev, priv);
|
||||
|
||||
ret = sun50i_a100_ledc_parse_format(dev, priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = sun50i_a100_ledc_parse_timing(dev, priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
|
||||
if (IS_ERR(priv->base))
|
||||
return PTR_ERR(priv->base);
|
||||
|
||||
priv->bus_clk = devm_clk_get(dev, "bus");
|
||||
if (IS_ERR(priv->bus_clk))
|
||||
return PTR_ERR(priv->bus_clk);
|
||||
|
||||
priv->mod_clk = devm_clk_get(dev, "mod");
|
||||
if (IS_ERR(priv->mod_clk))
|
||||
return PTR_ERR(priv->mod_clk);
|
||||
|
||||
priv->reset = devm_reset_control_get_exclusive(dev, NULL);
|
||||
if (IS_ERR(priv->reset))
|
||||
return PTR_ERR(priv->reset);
|
||||
|
||||
priv->dma_chan = dma_request_chan(dev, "tx");
|
||||
if (IS_ERR(priv->dma_chan)) {
|
||||
if (PTR_ERR(priv->dma_chan) != -ENODEV)
|
||||
return PTR_ERR(priv->dma_chan);
|
||||
|
||||
priv->dma_chan = NULL;
|
||||
|
||||
priv->buffer = devm_kzalloc(dev, LEDS_TO_BYTES(LEDC_MAX_LEDS), GFP_KERNEL);
|
||||
if (!priv->buffer)
|
||||
return -ENOMEM;
|
||||
} else {
|
||||
ret = devm_add_action_or_reset(dev, sun50i_a100_ledc_dma_cleanup, priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
dma_cfg.dst_addr = mem->start + LEDC_DATA_REG;
|
||||
dma_cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||||
dma_cfg.dst_maxburst = LEDC_FIFO_DEPTH / 2;
|
||||
|
||||
ret = dmaengine_slave_config(priv->dma_chan, &dma_cfg);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
priv->buffer = dmam_alloc_attrs(dmaengine_get_dma_device(priv->dma_chan),
|
||||
LEDS_TO_BYTES(LEDC_MAX_LEDS), &priv->dma_handle,
|
||||
GFP_KERNEL, DMA_ATTR_WRITE_COMBINE);
|
||||
if (!priv->buffer)
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0)
|
||||
return irq;
|
||||
|
||||
ret = devm_request_irq(dev, irq, sun50i_a100_ledc_irq, 0, dev_name(dev), priv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = sun50i_a100_ledc_resume(dev);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
led = priv->leds;
|
||||
device_for_each_child_node(dev, child) {
|
||||
struct led_classdev *cdev;
|
||||
|
||||
/* The node was already validated above. */
|
||||
fwnode_property_read_u32(child, "reg", &led->addr);
|
||||
|
||||
led->subled_info[0].color_index = LED_COLOR_ID_RED;
|
||||
led->subled_info[0].channel = 0;
|
||||
led->subled_info[1].color_index = LED_COLOR_ID_GREEN;
|
||||
led->subled_info[1].channel = 1;
|
||||
led->subled_info[2].color_index = LED_COLOR_ID_BLUE;
|
||||
led->subled_info[2].channel = 2;
|
||||
|
||||
led->mc_cdev.num_colors = ARRAY_SIZE(led->subled_info);
|
||||
led->mc_cdev.subled_info = led->subled_info;
|
||||
|
||||
cdev = &led->mc_cdev.led_cdev;
|
||||
cdev->max_brightness = U8_MAX;
|
||||
cdev->brightness_set = sun50i_a100_ledc_brightness_set;
|
||||
|
||||
init_data.fwnode = child;
|
||||
|
||||
ret = led_classdev_multicolor_register_ext(dev, &led->mc_cdev, &init_data);
|
||||
if (ret) {
|
||||
dev_err_probe(dev, ret, "Failed to register multicolor LED %u", led->addr);
|
||||
goto err_put_child;
|
||||
}
|
||||
|
||||
led++;
|
||||
}
|
||||
|
||||
dev_info(dev, "Registered %u LEDs\n", num_leds);
|
||||
|
||||
return 0;
|
||||
|
||||
err_put_child:
|
||||
fwnode_handle_put(child);
|
||||
while (led-- > priv->leds)
|
||||
led_classdev_multicolor_unregister(&led->mc_cdev);
|
||||
sun50i_a100_ledc_suspend(&pdev->dev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void sun50i_a100_ledc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct sun50i_a100_ledc *priv = platform_get_drvdata(pdev);
|
||||
|
||||
for (u32 i = 0; i < priv->num_leds; i++)
|
||||
led_classdev_multicolor_unregister(&priv->leds[i].mc_cdev);
|
||||
sun50i_a100_ledc_suspend(&pdev->dev);
|
||||
}
|
||||
|
||||
static const struct of_device_id sun50i_a100_ledc_of_match[] = {
|
||||
{ .compatible = "allwinner,sun50i-a100-ledc" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sun50i_a100_ledc_of_match);
|
||||
|
||||
static DEFINE_SIMPLE_DEV_PM_OPS(sun50i_a100_ledc_pm,
|
||||
sun50i_a100_ledc_suspend,
|
||||
sun50i_a100_ledc_resume);
|
||||
|
||||
static struct platform_driver sun50i_a100_ledc_driver = {
|
||||
.probe = sun50i_a100_ledc_probe,
|
||||
.remove_new = sun50i_a100_ledc_remove,
|
||||
.shutdown = sun50i_a100_ledc_remove,
|
||||
.driver = {
|
||||
.name = "sun50i-a100-ledc",
|
||||
.of_match_table = sun50i_a100_ledc_of_match,
|
||||
.pm = pm_ptr(&sun50i_a100_ledc_pm),
|
||||
},
|
||||
};
|
||||
module_platform_driver(sun50i_a100_ledc_driver);
|
||||
|
||||
MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
|
||||
MODULE_DESCRIPTION("Allwinner A100 LED controller driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
@@ -81,7 +81,8 @@ static int syscon_led_probe(struct platform_device *pdev)
|
||||
|
||||
sled->map = map;
|
||||
|
||||
if (of_property_read_u32(np, "offset", &sled->offset))
|
||||
if (of_property_read_u32(np, "reg", &sled->offset) &&
|
||||
of_property_read_u32(np, "offset", &sled->offset))
|
||||
return -EINVAL;
|
||||
if (of_property_read_u32(np, "mask", &sled->mask))
|
||||
return -EINVAL;
|
||||
|
||||
@@ -638,19 +638,13 @@ static int tca6507_probe_gpios(struct device *dev,
|
||||
tca->gpio.direction_output = tca6507_gpio_direction_output;
|
||||
tca->gpio.set = tca6507_gpio_set_value;
|
||||
tca->gpio.parent = dev;
|
||||
err = gpiochip_add_data(&tca->gpio, tca);
|
||||
err = devm_gpiochip_add_data(dev, &tca->gpio, tca);
|
||||
if (err) {
|
||||
tca->gpio.ngpio = 0;
|
||||
return err;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void tca6507_remove_gpio(struct tca6507_chip *tca)
|
||||
{
|
||||
if (tca->gpio.ngpio)
|
||||
gpiochip_remove(&tca->gpio);
|
||||
}
|
||||
#else /* CONFIG_GPIOLIB */
|
||||
static int tca6507_probe_gpios(struct device *dev,
|
||||
struct tca6507_chip *tca,
|
||||
@@ -658,9 +652,6 @@ static int tca6507_probe_gpios(struct device *dev,
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
static void tca6507_remove_gpio(struct tca6507_chip *tca)
|
||||
{
|
||||
}
|
||||
#endif /* CONFIG_GPIOLIB */
|
||||
|
||||
static struct tca6507_platform_data *
|
||||
@@ -762,38 +753,25 @@ static int tca6507_probe(struct i2c_client *client)
|
||||
l->led_cdev.brightness_set = tca6507_brightness_set;
|
||||
l->led_cdev.blink_set = tca6507_blink_set;
|
||||
l->bank = -1;
|
||||
err = led_classdev_register(dev, &l->led_cdev);
|
||||
err = devm_led_classdev_register(dev, &l->led_cdev);
|
||||
if (err < 0)
|
||||
goto exit;
|
||||
return err;
|
||||
}
|
||||
}
|
||||
err = tca6507_probe_gpios(dev, tca, pdata);
|
||||
if (err)
|
||||
goto exit;
|
||||
return err;
|
||||
/* set all registers to known state - zero */
|
||||
tca->reg_set = 0x7f;
|
||||
schedule_work(&tca->work);
|
||||
|
||||
return 0;
|
||||
exit:
|
||||
while (i--) {
|
||||
if (tca->leds[i].led_cdev.name)
|
||||
led_classdev_unregister(&tca->leds[i].led_cdev);
|
||||
}
|
||||
return err;
|
||||
}
|
||||
|
||||
static void tca6507_remove(struct i2c_client *client)
|
||||
{
|
||||
int i;
|
||||
struct tca6507_chip *tca = i2c_get_clientdata(client);
|
||||
struct tca6507_led *tca_leds = tca->leds;
|
||||
|
||||
for (i = 0; i < NUM_LEDS; i++) {
|
||||
if (tca_leds[i].led_cdev.name)
|
||||
led_classdev_unregister(&tca_leds[i].led_cdev);
|
||||
}
|
||||
tca6507_remove_gpio(tca);
|
||||
cancel_work_sync(&tca->work);
|
||||
}
|
||||
|
||||
|
||||
@@ -4,7 +4,7 @@ if LEDS_CLASS_MULTICOLOR
|
||||
|
||||
config LEDS_GROUP_MULTICOLOR
|
||||
tristate "LEDs group multi-color support"
|
||||
depends on OF || COMPILE_TEST
|
||||
depends on OF
|
||||
help
|
||||
This option enables support for monochrome LEDs that are grouped
|
||||
into multicolor LEDs which is useful in the case where LEDs of
|
||||
|
||||
@@ -552,9 +552,9 @@ static int lpg_parse_dtest(struct lpg *lpg)
|
||||
ret = count;
|
||||
goto err_malformed;
|
||||
} else if (count != lpg->data->num_channels * 2) {
|
||||
dev_err(lpg->dev, "qcom,dtest needs to be %d items\n",
|
||||
lpg->data->num_channels * 2);
|
||||
return -EINVAL;
|
||||
return dev_err_probe(lpg->dev, -EINVAL,
|
||||
"qcom,dtest needs to be %d items\n",
|
||||
lpg->data->num_channels * 2);
|
||||
}
|
||||
|
||||
for (i = 0; i < lpg->data->num_channels; i++) {
|
||||
@@ -574,8 +574,7 @@ static int lpg_parse_dtest(struct lpg *lpg)
|
||||
return 0;
|
||||
|
||||
err_malformed:
|
||||
dev_err(lpg->dev, "malformed qcom,dtest\n");
|
||||
return ret;
|
||||
return dev_err_probe(lpg->dev, ret, "malformed qcom,dtest\n");
|
||||
}
|
||||
|
||||
static void lpg_apply_dtest(struct lpg_channel *chan)
|
||||
@@ -977,9 +976,14 @@ static int lpg_pattern_mc_clear(struct led_classdev *cdev)
|
||||
return lpg_pattern_clear(led);
|
||||
}
|
||||
|
||||
static inline struct lpg *lpg_pwm_from_chip(struct pwm_chip *chip)
|
||||
{
|
||||
return container_of(chip, struct lpg, pwm);
|
||||
}
|
||||
|
||||
static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct lpg *lpg = container_of(chip, struct lpg, pwm);
|
||||
struct lpg *lpg = lpg_pwm_from_chip(chip);
|
||||
struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
|
||||
|
||||
return chan->in_use ? -EBUSY : 0;
|
||||
@@ -995,7 +999,7 @@ static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
const struct pwm_state *state)
|
||||
{
|
||||
struct lpg *lpg = container_of(chip, struct lpg, pwm);
|
||||
struct lpg *lpg = lpg_pwm_from_chip(chip);
|
||||
struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
|
||||
int ret = 0;
|
||||
|
||||
@@ -1026,7 +1030,7 @@ out_unlock:
|
||||
static int lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
struct lpg *lpg = container_of(chip, struct lpg, pwm);
|
||||
struct lpg *lpg = lpg_pwm_from_chip(chip);
|
||||
struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
|
||||
unsigned int resolution;
|
||||
unsigned int pre_div;
|
||||
@@ -1095,9 +1099,9 @@ static int lpg_add_pwm(struct lpg *lpg)
|
||||
lpg->pwm.npwm = lpg->num_channels;
|
||||
lpg->pwm.ops = &lpg_pwm_ops;
|
||||
|
||||
ret = pwmchip_add(&lpg->pwm);
|
||||
ret = devm_pwmchip_add(lpg->dev, &lpg->pwm);
|
||||
if (ret)
|
||||
dev_err(lpg->dev, "failed to add PWM chip: ret %d\n", ret);
|
||||
dev_err_probe(lpg->dev, ret, "failed to add PWM chip\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
@@ -1111,19 +1115,16 @@ static int lpg_parse_channel(struct lpg *lpg, struct device_node *np,
|
||||
int ret;
|
||||
|
||||
ret = of_property_read_u32(np, "reg", ®);
|
||||
if (ret || !reg || reg > lpg->num_channels) {
|
||||
dev_err(lpg->dev, "invalid \"reg\" of %pOFn\n", np);
|
||||
return -EINVAL;
|
||||
}
|
||||
if (ret || !reg || reg > lpg->num_channels)
|
||||
return dev_err_probe(lpg->dev, -EINVAL, "invalid \"reg\" of %pOFn\n", np);
|
||||
|
||||
chan = &lpg->channels[reg - 1];
|
||||
chan->in_use = true;
|
||||
|
||||
ret = of_property_read_u32(np, "color", &color);
|
||||
if (ret < 0 && ret != -EINVAL) {
|
||||
dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
|
||||
return ret;
|
||||
}
|
||||
if (ret < 0 && ret != -EINVAL)
|
||||
return dev_err_probe(lpg->dev, ret,
|
||||
"failed to parse \"color\" of %pOF\n", np);
|
||||
|
||||
chan->color = color;
|
||||
|
||||
@@ -1146,10 +1147,9 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
|
||||
int i;
|
||||
|
||||
ret = of_property_read_u32(np, "color", &color);
|
||||
if (ret < 0 && ret != -EINVAL) {
|
||||
dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
|
||||
return ret;
|
||||
}
|
||||
if (ret < 0 && ret != -EINVAL)
|
||||
return dev_err_probe(lpg->dev, ret,
|
||||
"failed to parse \"color\" of %pOF\n", np);
|
||||
|
||||
if (color == LED_COLOR_ID_RGB)
|
||||
num_channels = of_get_available_child_count(np);
|
||||
@@ -1226,7 +1226,7 @@ static int lpg_add_led(struct lpg *lpg, struct device_node *np)
|
||||
else
|
||||
ret = devm_led_classdev_register_ext(lpg->dev, &led->cdev, &init_data);
|
||||
if (ret)
|
||||
dev_err(lpg->dev, "unable to register %s\n", cdev->name);
|
||||
dev_err_probe(lpg->dev, ret, "unable to register %s\n", cdev->name);
|
||||
|
||||
return ret;
|
||||
}
|
||||
@@ -1272,10 +1272,9 @@ static int lpg_init_triled(struct lpg *lpg)
|
||||
|
||||
if (lpg->triled_has_src_sel) {
|
||||
ret = of_property_read_u32(np, "qcom,power-source", &lpg->triled_src);
|
||||
if (ret || lpg->triled_src == 2 || lpg->triled_src > 3) {
|
||||
dev_err(lpg->dev, "invalid power source\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
if (ret || lpg->triled_src == 2 || lpg->triled_src > 3)
|
||||
return dev_err_probe(lpg->dev, -EINVAL,
|
||||
"invalid power source\n");
|
||||
}
|
||||
|
||||
/* Disable automatic trickle charge LED */
|
||||
@@ -1324,8 +1323,6 @@ static int lpg_probe(struct platform_device *pdev)
|
||||
if (!lpg->data)
|
||||
return -EINVAL;
|
||||
|
||||
platform_set_drvdata(pdev, lpg);
|
||||
|
||||
lpg->dev = &pdev->dev;
|
||||
mutex_init(&lpg->lock);
|
||||
|
||||
@@ -1363,13 +1360,6 @@ static int lpg_probe(struct platform_device *pdev)
|
||||
return lpg_add_pwm(lpg);
|
||||
}
|
||||
|
||||
static void lpg_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct lpg *lpg = platform_get_drvdata(pdev);
|
||||
|
||||
pwmchip_remove(&lpg->pwm);
|
||||
}
|
||||
|
||||
static const struct lpg_data pm8916_pwm_data = {
|
||||
.num_channels = 1,
|
||||
.channels = (const struct lpg_channel_data[]) {
|
||||
@@ -1529,7 +1519,6 @@ MODULE_DEVICE_TABLE(of, lpg_of_table);
|
||||
|
||||
static struct platform_driver lpg_driver = {
|
||||
.probe = lpg_probe,
|
||||
.remove_new = lpg_remove,
|
||||
.driver = {
|
||||
.name = "qcom-spmi-lpg",
|
||||
.of_match_table = lpg_of_table,
|
||||
|
||||
@@ -41,33 +41,30 @@ static irqreturn_t gpio_trig_irq(int irq, void *_led)
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static ssize_t gpio_trig_brightness_show(struct device *dev,
|
||||
static ssize_t desired_brightness_show(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
|
||||
|
||||
return sprintf(buf, "%u\n", gpio_data->desired_brightness);
|
||||
return sysfs_emit(buf, "%u\n", gpio_data->desired_brightness);
|
||||
}
|
||||
|
||||
static ssize_t gpio_trig_brightness_store(struct device *dev,
|
||||
static ssize_t desired_brightness_store(struct device *dev,
|
||||
struct device_attribute *attr, const char *buf, size_t n)
|
||||
{
|
||||
struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev);
|
||||
unsigned desired_brightness;
|
||||
u8 desired_brightness;
|
||||
int ret;
|
||||
|
||||
ret = sscanf(buf, "%u", &desired_brightness);
|
||||
if (ret < 1 || desired_brightness > 255) {
|
||||
dev_err(dev, "invalid value\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
ret = kstrtou8(buf, 10, &desired_brightness);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
gpio_data->desired_brightness = desired_brightness;
|
||||
|
||||
return n;
|
||||
}
|
||||
static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show,
|
||||
gpio_trig_brightness_store);
|
||||
static DEVICE_ATTR_RW(desired_brightness);
|
||||
|
||||
static struct attribute *gpio_trig_attrs[] = {
|
||||
&dev_attr_desired_brightness.attr,
|
||||
@@ -89,10 +86,7 @@ static int gpio_trig_activate(struct led_classdev *led)
|
||||
* The generic property "trigger-sources" is followed,
|
||||
* and we hope that this is a GPIO.
|
||||
*/
|
||||
gpio_data->gpiod = fwnode_gpiod_get_index(dev->fwnode,
|
||||
"trigger-sources",
|
||||
0, GPIOD_IN,
|
||||
"led-trigger");
|
||||
gpio_data->gpiod = gpiod_get_optional(dev, "trigger-sources", GPIOD_IN);
|
||||
if (IS_ERR(gpio_data->gpiod)) {
|
||||
ret = PTR_ERR(gpio_data->gpiod);
|
||||
kfree(gpio_data);
|
||||
@@ -104,6 +98,8 @@ static int gpio_trig_activate(struct led_classdev *led)
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
gpiod_set_consumer_name(gpio_data->gpiod, "led-trigger");
|
||||
|
||||
gpio_data->led = led;
|
||||
led_set_trigger_data(led, gpio_data);
|
||||
|
||||
|
||||
@@ -38,6 +38,16 @@
|
||||
* tx - LED blinks on transmitted data
|
||||
* rx - LED blinks on receive data
|
||||
*
|
||||
* Note: If the user selects a mode that is not supported by hw, default
|
||||
* behavior is to fall back to software control of the LED. However not every
|
||||
* hw supports software control. LED callbacks brightness_set() and
|
||||
* brightness_set_blocking() are NULL in this case. hw_control_is_supported()
|
||||
* should use available means supported by hw to inform the user that selected
|
||||
* mode isn't supported by hw. This could be switching off the LED or any
|
||||
* hw blink mode. If software control fallback isn't possible, we return
|
||||
* -EOPNOTSUPP to the user, but still store the selected mode. This is needed
|
||||
* in case an intermediate unsupported mode is necessary to switch from one
|
||||
* supported mode to another.
|
||||
*/
|
||||
|
||||
struct led_netdev_data {
|
||||
@@ -99,6 +109,18 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
|
||||
trigger_data->link_speed == SPEED_1000)
|
||||
blink_on = true;
|
||||
|
||||
if (test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) &&
|
||||
trigger_data->link_speed == SPEED_2500)
|
||||
blink_on = true;
|
||||
|
||||
if (test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) &&
|
||||
trigger_data->link_speed == SPEED_5000)
|
||||
blink_on = true;
|
||||
|
||||
if (test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) &&
|
||||
trigger_data->link_speed == SPEED_10000)
|
||||
blink_on = true;
|
||||
|
||||
if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) &&
|
||||
trigger_data->duplex == DUPLEX_HALF)
|
||||
blink_on = true;
|
||||
@@ -289,6 +311,9 @@ static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
|
||||
case TRIGGER_NETDEV_LINK_10:
|
||||
case TRIGGER_NETDEV_LINK_100:
|
||||
case TRIGGER_NETDEV_LINK_1000:
|
||||
case TRIGGER_NETDEV_LINK_2500:
|
||||
case TRIGGER_NETDEV_LINK_5000:
|
||||
case TRIGGER_NETDEV_LINK_10000:
|
||||
case TRIGGER_NETDEV_HALF_DUPLEX:
|
||||
case TRIGGER_NETDEV_FULL_DUPLEX:
|
||||
case TRIGGER_NETDEV_TX:
|
||||
@@ -306,6 +331,7 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
|
||||
size_t size, enum led_trigger_netdev_modes attr)
|
||||
{
|
||||
struct led_netdev_data *trigger_data = led_trigger_get_drvdata(dev);
|
||||
struct led_classdev *led_cdev = trigger_data->led_cdev;
|
||||
unsigned long state, mode = trigger_data->mode;
|
||||
int ret;
|
||||
int bit;
|
||||
@@ -319,6 +345,9 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
|
||||
case TRIGGER_NETDEV_LINK_10:
|
||||
case TRIGGER_NETDEV_LINK_100:
|
||||
case TRIGGER_NETDEV_LINK_1000:
|
||||
case TRIGGER_NETDEV_LINK_2500:
|
||||
case TRIGGER_NETDEV_LINK_5000:
|
||||
case TRIGGER_NETDEV_LINK_10000:
|
||||
case TRIGGER_NETDEV_HALF_DUPLEX:
|
||||
case TRIGGER_NETDEV_FULL_DUPLEX:
|
||||
case TRIGGER_NETDEV_TX:
|
||||
@@ -337,7 +366,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
|
||||
if (test_bit(TRIGGER_NETDEV_LINK, &mode) &&
|
||||
(test_bit(TRIGGER_NETDEV_LINK_10, &mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_100, &mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_1000, &mode)))
|
||||
test_bit(TRIGGER_NETDEV_LINK_1000, &mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_2500, &mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_5000, &mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_10000, &mode)))
|
||||
return -EINVAL;
|
||||
|
||||
cancel_delayed_work_sync(&trigger_data->work);
|
||||
@@ -345,6 +377,10 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
|
||||
trigger_data->mode = mode;
|
||||
trigger_data->hw_control = can_hw_control(trigger_data);
|
||||
|
||||
if (!led_cdev->brightness_set && !led_cdev->brightness_set_blocking &&
|
||||
!trigger_data->hw_control)
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
set_baseline_state(trigger_data);
|
||||
|
||||
return size;
|
||||
@@ -367,6 +403,9 @@ DEFINE_NETDEV_TRIGGER(link, TRIGGER_NETDEV_LINK);
|
||||
DEFINE_NETDEV_TRIGGER(link_10, TRIGGER_NETDEV_LINK_10);
|
||||
DEFINE_NETDEV_TRIGGER(link_100, TRIGGER_NETDEV_LINK_100);
|
||||
DEFINE_NETDEV_TRIGGER(link_1000, TRIGGER_NETDEV_LINK_1000);
|
||||
DEFINE_NETDEV_TRIGGER(link_2500, TRIGGER_NETDEV_LINK_2500);
|
||||
DEFINE_NETDEV_TRIGGER(link_5000, TRIGGER_NETDEV_LINK_5000);
|
||||
DEFINE_NETDEV_TRIGGER(link_10000, TRIGGER_NETDEV_LINK_10000);
|
||||
DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
|
||||
DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
|
||||
DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
|
||||
@@ -425,6 +464,9 @@ static struct attribute *netdev_trig_attrs[] = {
|
||||
&dev_attr_link_10.attr,
|
||||
&dev_attr_link_100.attr,
|
||||
&dev_attr_link_1000.attr,
|
||||
&dev_attr_link_2500.attr,
|
||||
&dev_attr_link_5000.attr,
|
||||
&dev_attr_link_10000.attr,
|
||||
&dev_attr_full_duplex.attr,
|
||||
&dev_attr_half_duplex.attr,
|
||||
&dev_attr_rx.attr,
|
||||
@@ -522,6 +564,9 @@ static void netdev_trig_work(struct work_struct *work)
|
||||
test_bit(TRIGGER_NETDEV_LINK_10, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_100, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_1000, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_2500, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_5000, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_LINK_10000, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &trigger_data->mode) ||
|
||||
test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &trigger_data->mode);
|
||||
interval = jiffies_to_msecs(
|
||||
|
||||
@@ -64,10 +64,13 @@ static long led_panic_blink(int state)
|
||||
|
||||
static int __init ledtrig_panic_init(void)
|
||||
{
|
||||
led_trigger_register_simple("panic", &trigger);
|
||||
if (!trigger)
|
||||
return -ENOMEM;
|
||||
|
||||
atomic_notifier_chain_register(&panic_notifier_list,
|
||||
&led_trigger_panic_nb);
|
||||
|
||||
led_trigger_register_simple("panic", &trigger);
|
||||
panic_blink = led_panic_blink;
|
||||
return 0;
|
||||
}
|
||||
|
||||
@@ -1,5 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
#include <linux/completion.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/module.h>
|
||||
@@ -12,15 +13,45 @@
|
||||
struct ledtrig_tty_data {
|
||||
struct led_classdev *led_cdev;
|
||||
struct delayed_work dwork;
|
||||
struct mutex mutex;
|
||||
struct completion sysfs;
|
||||
const char *ttyname;
|
||||
struct tty_struct *tty;
|
||||
int rx, tx;
|
||||
bool mode_rx;
|
||||
bool mode_tx;
|
||||
bool mode_cts;
|
||||
bool mode_dsr;
|
||||
bool mode_dcd;
|
||||
bool mode_rng;
|
||||
};
|
||||
|
||||
static void ledtrig_tty_restart(struct ledtrig_tty_data *trigger_data)
|
||||
/* Indicates which state the LED should now display */
|
||||
enum led_trigger_tty_state {
|
||||
TTY_LED_BLINK,
|
||||
TTY_LED_ENABLE,
|
||||
TTY_LED_DISABLE,
|
||||
};
|
||||
|
||||
enum led_trigger_tty_modes {
|
||||
TRIGGER_TTY_RX = 0,
|
||||
TRIGGER_TTY_TX,
|
||||
TRIGGER_TTY_CTS,
|
||||
TRIGGER_TTY_DSR,
|
||||
TRIGGER_TTY_DCD,
|
||||
TRIGGER_TTY_RNG,
|
||||
};
|
||||
|
||||
static int ledtrig_tty_wait_for_completion(struct device *dev)
|
||||
{
|
||||
schedule_delayed_work(&trigger_data->dwork, 0);
|
||||
struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = wait_for_completion_timeout(&trigger_data->sysfs,
|
||||
msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 20));
|
||||
if (ret == 0)
|
||||
return -ETIMEDOUT;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static ssize_t ttyname_show(struct device *dev,
|
||||
@@ -28,14 +59,16 @@ static ssize_t ttyname_show(struct device *dev,
|
||||
{
|
||||
struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
|
||||
ssize_t len = 0;
|
||||
int completion;
|
||||
|
||||
mutex_lock(&trigger_data->mutex);
|
||||
reinit_completion(&trigger_data->sysfs);
|
||||
completion = ledtrig_tty_wait_for_completion(dev);
|
||||
if (completion < 0)
|
||||
return completion;
|
||||
|
||||
if (trigger_data->ttyname)
|
||||
len = sprintf(buf, "%s\n", trigger_data->ttyname);
|
||||
|
||||
mutex_unlock(&trigger_data->mutex);
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
@@ -46,7 +79,7 @@ static ssize_t ttyname_store(struct device *dev,
|
||||
struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
|
||||
char *ttyname;
|
||||
ssize_t ret = size;
|
||||
bool running;
|
||||
int completion;
|
||||
|
||||
if (size > 0 && buf[size - 1] == '\n')
|
||||
size -= 1;
|
||||
@@ -59,9 +92,10 @@ static ssize_t ttyname_store(struct device *dev,
|
||||
ttyname = NULL;
|
||||
}
|
||||
|
||||
mutex_lock(&trigger_data->mutex);
|
||||
|
||||
running = trigger_data->ttyname != NULL;
|
||||
reinit_completion(&trigger_data->sysfs);
|
||||
completion = ledtrig_tty_wait_for_completion(dev);
|
||||
if (completion < 0)
|
||||
return completion;
|
||||
|
||||
kfree(trigger_data->ttyname);
|
||||
tty_kref_put(trigger_data->tty);
|
||||
@@ -69,29 +103,107 @@ static ssize_t ttyname_store(struct device *dev,
|
||||
|
||||
trigger_data->ttyname = ttyname;
|
||||
|
||||
mutex_unlock(&trigger_data->mutex);
|
||||
|
||||
if (ttyname && !running)
|
||||
ledtrig_tty_restart(trigger_data);
|
||||
|
||||
return ret;
|
||||
}
|
||||
static DEVICE_ATTR_RW(ttyname);
|
||||
|
||||
static ssize_t ledtrig_tty_attr_show(struct device *dev, char *buf,
|
||||
enum led_trigger_tty_modes attr)
|
||||
{
|
||||
struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
|
||||
bool state;
|
||||
|
||||
switch (attr) {
|
||||
case TRIGGER_TTY_RX:
|
||||
state = trigger_data->mode_rx;
|
||||
break;
|
||||
case TRIGGER_TTY_TX:
|
||||
state = trigger_data->mode_tx;
|
||||
break;
|
||||
case TRIGGER_TTY_CTS:
|
||||
state = trigger_data->mode_cts;
|
||||
break;
|
||||
case TRIGGER_TTY_DSR:
|
||||
state = trigger_data->mode_dsr;
|
||||
break;
|
||||
case TRIGGER_TTY_DCD:
|
||||
state = trigger_data->mode_dcd;
|
||||
break;
|
||||
case TRIGGER_TTY_RNG:
|
||||
state = trigger_data->mode_rng;
|
||||
break;
|
||||
}
|
||||
|
||||
return sysfs_emit(buf, "%u\n", state);
|
||||
}
|
||||
|
||||
static ssize_t ledtrig_tty_attr_store(struct device *dev, const char *buf,
|
||||
size_t size, enum led_trigger_tty_modes attr)
|
||||
{
|
||||
struct ledtrig_tty_data *trigger_data = led_trigger_get_drvdata(dev);
|
||||
bool state;
|
||||
int ret;
|
||||
|
||||
ret = kstrtobool(buf, &state);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
switch (attr) {
|
||||
case TRIGGER_TTY_RX:
|
||||
trigger_data->mode_rx = state;
|
||||
break;
|
||||
case TRIGGER_TTY_TX:
|
||||
trigger_data->mode_tx = state;
|
||||
break;
|
||||
case TRIGGER_TTY_CTS:
|
||||
trigger_data->mode_cts = state;
|
||||
break;
|
||||
case TRIGGER_TTY_DSR:
|
||||
trigger_data->mode_dsr = state;
|
||||
break;
|
||||
case TRIGGER_TTY_DCD:
|
||||
trigger_data->mode_dcd = state;
|
||||
break;
|
||||
case TRIGGER_TTY_RNG:
|
||||
trigger_data->mode_rng = state;
|
||||
break;
|
||||
}
|
||||
|
||||
return size;
|
||||
}
|
||||
|
||||
#define DEFINE_TTY_TRIGGER(trigger_name, trigger) \
|
||||
static ssize_t trigger_name##_show(struct device *dev, \
|
||||
struct device_attribute *attr, char *buf) \
|
||||
{ \
|
||||
return ledtrig_tty_attr_show(dev, buf, trigger); \
|
||||
} \
|
||||
static ssize_t trigger_name##_store(struct device *dev, \
|
||||
struct device_attribute *attr, const char *buf, size_t size) \
|
||||
{ \
|
||||
return ledtrig_tty_attr_store(dev, buf, size, trigger); \
|
||||
} \
|
||||
static DEVICE_ATTR_RW(trigger_name)
|
||||
|
||||
DEFINE_TTY_TRIGGER(rx, TRIGGER_TTY_RX);
|
||||
DEFINE_TTY_TRIGGER(tx, TRIGGER_TTY_TX);
|
||||
DEFINE_TTY_TRIGGER(cts, TRIGGER_TTY_CTS);
|
||||
DEFINE_TTY_TRIGGER(dsr, TRIGGER_TTY_DSR);
|
||||
DEFINE_TTY_TRIGGER(dcd, TRIGGER_TTY_DCD);
|
||||
DEFINE_TTY_TRIGGER(rng, TRIGGER_TTY_RNG);
|
||||
|
||||
static void ledtrig_tty_work(struct work_struct *work)
|
||||
{
|
||||
struct ledtrig_tty_data *trigger_data =
|
||||
container_of(work, struct ledtrig_tty_data, dwork.work);
|
||||
struct serial_icounter_struct icount;
|
||||
enum led_trigger_tty_state state = TTY_LED_DISABLE;
|
||||
unsigned long interval = LEDTRIG_TTY_INTERVAL;
|
||||
bool invert = false;
|
||||
int status;
|
||||
int ret;
|
||||
|
||||
mutex_lock(&trigger_data->mutex);
|
||||
|
||||
if (!trigger_data->ttyname) {
|
||||
/* exit without rescheduling */
|
||||
mutex_unlock(&trigger_data->mutex);
|
||||
return;
|
||||
}
|
||||
if (!trigger_data->ttyname)
|
||||
goto out;
|
||||
|
||||
/* try to get the tty corresponding to $ttyname */
|
||||
if (!trigger_data->tty) {
|
||||
@@ -115,32 +227,83 @@ static void ledtrig_tty_work(struct work_struct *work)
|
||||
trigger_data->tty = tty;
|
||||
}
|
||||
|
||||
ret = tty_get_icount(trigger_data->tty, &icount);
|
||||
if (ret) {
|
||||
dev_info(trigger_data->tty->dev, "Failed to get icount, stopped polling\n");
|
||||
mutex_unlock(&trigger_data->mutex);
|
||||
return;
|
||||
status = tty_get_tiocm(trigger_data->tty);
|
||||
if (status > 0) {
|
||||
if (trigger_data->mode_cts) {
|
||||
if (status & TIOCM_CTS)
|
||||
state = TTY_LED_ENABLE;
|
||||
}
|
||||
|
||||
if (trigger_data->mode_dsr) {
|
||||
if (status & TIOCM_DSR)
|
||||
state = TTY_LED_ENABLE;
|
||||
}
|
||||
|
||||
if (trigger_data->mode_dcd) {
|
||||
if (status & TIOCM_CAR)
|
||||
state = TTY_LED_ENABLE;
|
||||
}
|
||||
|
||||
if (trigger_data->mode_rng) {
|
||||
if (status & TIOCM_RNG)
|
||||
state = TTY_LED_ENABLE;
|
||||
}
|
||||
}
|
||||
|
||||
if (icount.rx != trigger_data->rx ||
|
||||
icount.tx != trigger_data->tx) {
|
||||
unsigned long interval = LEDTRIG_TTY_INTERVAL;
|
||||
/*
|
||||
* The evaluation of rx/tx must be done after the evaluation
|
||||
* of TIOCM_*, because rx/tx has priority.
|
||||
*/
|
||||
if (trigger_data->mode_rx || trigger_data->mode_tx) {
|
||||
struct serial_icounter_struct icount;
|
||||
|
||||
led_blink_set_oneshot(trigger_data->led_cdev, &interval,
|
||||
&interval, 0);
|
||||
ret = tty_get_icount(trigger_data->tty, &icount);
|
||||
if (ret)
|
||||
goto out;
|
||||
|
||||
trigger_data->rx = icount.rx;
|
||||
trigger_data->tx = icount.tx;
|
||||
if (trigger_data->mode_tx && (icount.tx != trigger_data->tx)) {
|
||||
trigger_data->tx = icount.tx;
|
||||
invert = state == TTY_LED_ENABLE;
|
||||
state = TTY_LED_BLINK;
|
||||
}
|
||||
|
||||
if (trigger_data->mode_rx && (icount.rx != trigger_data->rx)) {
|
||||
trigger_data->rx = icount.rx;
|
||||
invert = state == TTY_LED_ENABLE;
|
||||
state = TTY_LED_BLINK;
|
||||
}
|
||||
}
|
||||
|
||||
out:
|
||||
mutex_unlock(&trigger_data->mutex);
|
||||
switch (state) {
|
||||
case TTY_LED_BLINK:
|
||||
led_blink_set_oneshot(trigger_data->led_cdev, &interval,
|
||||
&interval, invert);
|
||||
break;
|
||||
case TTY_LED_ENABLE:
|
||||
led_set_brightness(trigger_data->led_cdev,
|
||||
trigger_data->led_cdev->blink_brightness);
|
||||
break;
|
||||
case TTY_LED_DISABLE:
|
||||
fallthrough;
|
||||
default:
|
||||
led_set_brightness(trigger_data->led_cdev, LED_OFF);
|
||||
break;
|
||||
}
|
||||
|
||||
complete_all(&trigger_data->sysfs);
|
||||
schedule_delayed_work(&trigger_data->dwork,
|
||||
msecs_to_jiffies(LEDTRIG_TTY_INTERVAL * 2));
|
||||
}
|
||||
|
||||
static struct attribute *ledtrig_tty_attrs[] = {
|
||||
&dev_attr_ttyname.attr,
|
||||
&dev_attr_rx.attr,
|
||||
&dev_attr_tx.attr,
|
||||
&dev_attr_cts.attr,
|
||||
&dev_attr_dsr.attr,
|
||||
&dev_attr_dcd.attr,
|
||||
&dev_attr_rng.attr,
|
||||
NULL
|
||||
};
|
||||
ATTRIBUTE_GROUPS(ledtrig_tty);
|
||||
@@ -153,11 +316,17 @@ static int ledtrig_tty_activate(struct led_classdev *led_cdev)
|
||||
if (!trigger_data)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Enable default rx/tx mode */
|
||||
trigger_data->mode_rx = true;
|
||||
trigger_data->mode_tx = true;
|
||||
|
||||
led_set_trigger_data(led_cdev, trigger_data);
|
||||
|
||||
INIT_DELAYED_WORK(&trigger_data->dwork, ledtrig_tty_work);
|
||||
trigger_data->led_cdev = led_cdev;
|
||||
mutex_init(&trigger_data->mutex);
|
||||
init_completion(&trigger_data->sysfs);
|
||||
|
||||
schedule_delayed_work(&trigger_data->dwork, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
@@ -168,6 +337,10 @@ static void ledtrig_tty_deactivate(struct led_classdev *led_cdev)
|
||||
|
||||
cancel_delayed_work_sync(&trigger_data->dwork);
|
||||
|
||||
kfree(trigger_data->ttyname);
|
||||
tty_kref_put(trigger_data->tty);
|
||||
trigger_data->tty = NULL;
|
||||
|
||||
kfree(trigger_data);
|
||||
}
|
||||
|
||||
|
||||
@@ -553,7 +553,8 @@ static irqreturn_t mhuv2_sender_interrupt(int irq, void *data)
|
||||
priv = chan->con_priv;
|
||||
|
||||
if (!IS_PROTOCOL_DOORBELL(priv)) {
|
||||
writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx + priv->windows - 1].int_clr);
|
||||
for (i = 0; i < priv->windows; i++)
|
||||
writel_relaxed(1, &mhu->send->ch_wn[priv->ch_wn_idx + i].int_clr);
|
||||
|
||||
if (chan->cl) {
|
||||
mbox_chan_txdone(chan, 0);
|
||||
|
||||
@@ -1650,7 +1650,7 @@ fail:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int flexrm_mbox_remove(struct platform_device *pdev)
|
||||
static void flexrm_mbox_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct flexrm_mbox *mbox = platform_get_drvdata(pdev);
|
||||
@@ -1661,8 +1661,6 @@ static int flexrm_mbox_remove(struct platform_device *pdev)
|
||||
|
||||
dma_pool_destroy(mbox->cmpl_pool);
|
||||
dma_pool_destroy(mbox->bd_pool);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id flexrm_mbox_of_match[] = {
|
||||
@@ -1677,7 +1675,7 @@ static struct platform_driver flexrm_mbox_driver = {
|
||||
.of_match_table = flexrm_mbox_of_match,
|
||||
},
|
||||
.probe = flexrm_mbox_probe,
|
||||
.remove = flexrm_mbox_remove,
|
||||
.remove_new = flexrm_mbox_remove,
|
||||
};
|
||||
module_platform_driver(flexrm_mbox_driver);
|
||||
|
||||
|
||||
@@ -1605,7 +1605,7 @@ cleanup:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int pdc_remove(struct platform_device *pdev)
|
||||
static void pdc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct pdc_state *pdcs = platform_get_drvdata(pdev);
|
||||
|
||||
@@ -1617,12 +1617,11 @@ static int pdc_remove(struct platform_device *pdev)
|
||||
|
||||
dma_pool_destroy(pdcs->rx_buf_pool);
|
||||
dma_pool_destroy(pdcs->ring_pool);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver pdc_mbox_driver = {
|
||||
.probe = pdc_probe,
|
||||
.remove = pdc_remove,
|
||||
.remove_new = pdc_remove,
|
||||
.driver = {
|
||||
.name = "brcm-iproc-pdc-mbox",
|
||||
.of_match_table = pdc_mbox_of_match,
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user