drm/amdgpu/OLAND: clip the ref divider max value

This patch limits the ref_div_max value to 100, during the
calculation of PLL feedback reference divider. With current
value (128), the produced fb_ref_div value generates unstable
output at particular frequencies. Radeon driver limits this
value at 100.

On Oland, when we try to setup mode 2048x1280@60 (a bit weird,
I know), it demands a clock of 221270 Khz. It's been observed
that the PLL calculations using values 128 and 100 are vastly
different, and look like this:

+------------------------------------------+
|Parameter    |AMDGPU        |Radeon       |
|             |              |             |
+-------------+----------------------------+
|Clock feedback              |             |
|divider max  |  128         |   100       |
|cap value    |              |             |
|             |              |             |
|             |              |             |
+------------------------------------------+
|ref_div_max  |              |             |
|             |  42          |  20         |
|             |              |             |
|             |              |             |
+------------------------------------------+
|ref_div      |  42          |  20         |
|             |              |             |
+------------------------------------------+
|fb_div       |  10326       |  8195       |
+------------------------------------------+
|fb_div       |  1024        |  163        |
+------------------------------------------+
|fb_dev_p     |  4           |  9          |
|frac fb_de^_p|              |             |
+----------------------------+-------------+

With ref_div_max value clipped at 100, AMDGPU driver can also
drive videmode 2048x1280@60 (221Mhz) and produce proper output
without any blanking and distortion on the screen.

PS: This value was changed from 128 to 100 in Radeon driver also, here:
https://github.com/freedesktop/drm-tip/commit/4b21ce1b4b5d262e7d4656b8ececc891fc3cb806

V1:
Got acks from:
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

V2:
- Restricting the changes only for OLAND, just to avoid any regression
  for other cards.
- Changed unsigned -> unsigned int to make checkpatch quiet.

V3: Apply the change on SI family (not only oland) (Christian)

Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eddy Qin <Eddy.Qin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/amdgpu_pll.c

@@ -80,12 +80,17 @@ static void amdgpu_pll_reduce_ratio(unsigned *nom, unsigned *den,
  * Calculate feedback and reference divider for a given post divider. Makes
  * sure we stay within the limits.
  */
-static void amdgpu_pll_get_fb_ref_div(unsigned nom, unsigned den, unsigned post_div,
-				      unsigned fb_div_max, unsigned ref_div_max,
-				      unsigned *fb_div, unsigned *ref_div)
+static void amdgpu_pll_get_fb_ref_div(struct amdgpu_device *adev, unsigned int nom,
+				      unsigned int den, unsigned int post_div,
+				      unsigned int fb_div_max, unsigned int ref_div_max,
+				      unsigned int *fb_div, unsigned int *ref_div)
 {
+
 	/* limit reference * post divider to a maximum */
-	ref_div_max = min(128 / post_div, ref_div_max);
+	if (adev->family == AMDGPU_FAMILY_SI)
+		ref_div_max = min(100 / post_div, ref_div_max);
+	else
+		ref_div_max = min(128 / post_div, ref_div_max);
 
 	/* get matching reference and feedback divider */
 	*ref_div = min(max(DIV_ROUND_CLOSEST(den, post_div), 1u), ref_div_max);
@@ -112,7 +117,8 @@ static void amdgpu_pll_get_fb_ref_div(unsigned nom, unsigned den, unsigned post_
  * Try to calculate the PLL parameters to generate the given frequency:
  * dot_clock = (ref_freq * feedback_div) / (ref_div * post_div)
  */
-void amdgpu_pll_compute(struct amdgpu_pll *pll,
+void amdgpu_pll_compute(struct amdgpu_device *adev,
+			struct amdgpu_pll *pll,
 			u32 freq,
 			u32 *dot_clock_p,
 			u32 *fb_div_p,
@@ -199,7 +205,7 @@ void amdgpu_pll_compute(struct amdgpu_pll *pll,
 
 	for (post_div = post_div_min; post_div <= post_div_max; ++post_div) {
 		unsigned diff;
-		amdgpu_pll_get_fb_ref_div(nom, den, post_div, fb_div_max,
+		amdgpu_pll_get_fb_ref_div(adev, nom, den, post_div, fb_div_max,
 					  ref_div_max, &fb_div, &ref_div);
 		diff = abs(target_clock - (pll->reference_freq * fb_div) /
 			(ref_div * post_div));
@@ -214,7 +220,7 @@ void amdgpu_pll_compute(struct amdgpu_pll *pll,
 	post_div = post_div_best;
 
 	/* get the feedback and reference divider for the optimal value */
-	amdgpu_pll_get_fb_ref_div(nom, den, post_div, fb_div_max, ref_div_max,
+	amdgpu_pll_get_fb_ref_div(adev, nom, den, post_div, fb_div_max, ref_div_max,
 				  &fb_div, &ref_div);
 
 	/* reduce the numbers to a simpler ratio once more */

drivers/gpu/drm/amd/amdgpu/amdgpu_pll.h

@@ -24,7 +24,8 @@
 #ifndef __AMDGPU_PLL_H__
 #define __AMDGPU_PLL_H__
 
-void amdgpu_pll_compute(struct amdgpu_pll *pll,
+void amdgpu_pll_compute(struct amdgpu_device *adev,
+			 struct amdgpu_pll *pll,
 			 u32 freq,
 			 u32 *dot_clock_p,
 			 u32 *fb_div_p,

drivers/gpu/drm/amd/amdgpu/atombios_crtc.c

@@ -851,7 +851,7 @@ void amdgpu_atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
 	pll->reference_div = amdgpu_crtc->pll_reference_div;
 	pll->post_div = amdgpu_crtc->pll_post_div;
 
-	amdgpu_pll_compute(pll, amdgpu_crtc->adjusted_clock, &pll_clock,
+	amdgpu_pll_compute(adev, pll, amdgpu_crtc->adjusted_clock, &pll_clock,
 			    &fb_div, &frac_fb_div, &ref_div, &post_div);
 
 	amdgpu_atombios_crtc_program_ss(adev, ATOM_DISABLE, amdgpu_crtc->pll_id,