Merge tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/drivers

Driver changes for omaps for v6.6

Driver changes for ti-sysc interconnect target module driver and for
l3 interconnect error handler. The ti-sysc driver changes just enable
using it for 64-bit systems like TI am62 that have wake-up capability
for the wkup domain devices. The l3 error handling improves the code
to show the error source if an unrecoverable timeout error occurs.

* tag 'omap-for-v6.6/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix cast to enum warning
  bus: ti-sysc: Fix a build warning with W=1 for sysconfig
  bus: ti-sysc: Configure uart quirks for k3 SoC
  bus: ti-sysc: Build driver for TI K3 SoCs
  bus: ti-sysc: Fix build warning for 64-bit build
  bus: omap_l3_smx: identify timeout cause before rebooting

Link: https://lore.kernel.org/r/pull-1692158857-597450@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

drivers/bus/Kconfig

@@ -210,7 +210,8 @@ config  TI_PWMSS
 
 config TI_SYSC
 	bool "TI sysc interconnect target module driver"
-	depends on ARCH_OMAP2PLUS
+	depends on ARCH_OMAP2PLUS || ARCH_K3
+	default y
 	help
 	  Generic driver for Texas Instruments interconnect target module
 	  found on many TI SoCs.

drivers/bus/omap_l3_smx.c

@@ -166,19 +166,10 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 	irqreturn_t ret = IRQ_NONE;
 
 	int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR;
-	if (!int_type) {
+	if (!int_type)
 		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0);
-		/*
-		 * if we have a timeout error, there's nothing we can
-		 * do besides rebooting the board. So let's BUG on any
-		 * of such errors and handle the others. timeout error
-		 * is severe and not expected to occur.
-		 */
-		BUG_ON(status & L3_STATUS_0_TIMEOUT_MASK);
-	} else {
+	else
 		status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_1);
-		/* No timeout error for debug sources */
-	}
 
 	/* identify the error source */
 	err_source = __ffs(status);
@@ -190,6 +181,14 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 		ret |= omap3_l3_block_irq(l3, error, error_addr);
 	}
 
+	/*
+	 * if we have a timeout error, there's nothing we can
+	 * do besides rebooting the board. So let's BUG on any
+	 * of such errors and handle the others. timeout error
+	 * is severe and not expected to occur.
+	 */
+	BUG_ON(!int_type && status & L3_STATUS_0_TIMEOUT_MASK);
+
 	/* Clear the status register */
 	clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) |
 		L3_AGENT_STATUS_CLEAR_TA;

drivers/bus/ti-sysc.c

@@ -109,6 +109,7 @@ static const char * const clock_names[SYSC_MAX_CLOCKS] = {
  * @cookie: data used by legacy platform callbacks
  * @name: name if available
  * @revision: interconnect target module revision
+ * @sysconfig: saved sysconfig register value
  * @reserved: target module is reserved and already in use
  * @enabled: sysc runtime enabled status
  * @needs_resume: runtime resume needed on resume from suspend
@@ -1525,6 +1526,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
 	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
 		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
+	SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff,
+		   SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
 
 	/* Quirks that need to be set based on the module address */
 	SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,
@@ -3104,7 +3107,7 @@ static int sysc_init_static_data(struct sysc *ddata)
 
 	match = soc_device_match(sysc_soc_match);
 	if (match && match->data)
-		sysc_soc->soc = (int)match->data;
+		sysc_soc->soc = (enum sysc_soc)(uintptr_t)match->data;
 
 	/*
 	 * Check and warn about possible old incomplete dtb. We now want to see