Merge bdc753c7fc ("Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux") into android-mainline

Steps on the way to 6.1-rc1

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I0c01f1adcf4209272e2b4a0006637a33eecf421c

Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml

@@ -23,6 +23,7 @@ properties:
               - mediatek,mt2701-infracfg
               - mediatek,mt2712-infracfg
               - mediatek,mt6765-infracfg
+              - mediatek,mt6795-infracfg
               - mediatek,mt6779-infracfg_ao
               - mediatek,mt6797-infracfg
               - mediatek,mt7622-infracfg
@@ -60,6 +61,7 @@ if:
         enum:
           - mediatek,mt2701-infracfg
           - mediatek,mt2712-infracfg
+          - mediatek,mt6795-infracfg
           - mediatek,mt7622-infracfg
           - mediatek,mt7986-infracfg
           - mediatek,mt8135-infracfg

Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml

@@ -25,6 +25,7 @@ properties:
               - mediatek,mt2712-mmsys
               - mediatek,mt6765-mmsys
               - mediatek,mt6779-mmsys
+              - mediatek,mt6795-mmsys
               - mediatek,mt6797-mmsys
               - mediatek,mt8167-mmsys
               - mediatek,mt8173-mmsys

Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml

@@ -21,6 +21,7 @@ properties:
               - mediatek,mt2701-pericfg
               - mediatek,mt2712-pericfg
               - mediatek,mt6765-pericfg
+              - mediatek,mt6795-pericfg
               - mediatek,mt7622-pericfg
               - mediatek,mt7629-pericfg
               - mediatek,mt8135-pericfg

Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml

@@ -23,7 +23,6 @@ properties:
   clocks:
     description:
       Common clock binding for CLK_IN, XTI/REF_CLK
-    minItems: 2
     maxItems: 2
 
   clock-names:

Documentation/devicetree/bindings/clock/gpio-gate-clock.txt

@@ -1,21 +0,0 @@
-Binding for simple gpio gated clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "gpio-gate-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- enable-gpios : GPIO reference for enabling and disabling the clock.
-
-Optional properties:
-- clocks: Maximum of one parent clock is supported.
-
-Example:
-	clock {
-		compatible = "gpio-gate-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-	};

Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };

Documentation/devicetree/bindings/clock/idt,versaclock5.yaml

@@ -56,6 +56,7 @@ properties:
       - idt,5p49v5935
       - idt,5p49v6901
       - idt,5p49v6965
+      - idt,5p49v6975
 
   reg:
     description: I2C device address
@@ -108,7 +109,7 @@ patternProperties:
     properties:
       idt,mode:
         description:
-          The output drive mode. Values defined in dt-bindings/clk/versaclock.h
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 6
@@ -134,6 +135,7 @@ allOf:
           enum:
             - idt,5p49v5933
             - idt,5p49v5935
+            - idt,5p49v6975
     then:
       # Devices with builtin crystal + optional external input
       properties:
@@ -151,7 +153,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/versaclock.h>
+    #include <dt-bindings/clock/versaclock.h>
 
     /* 25MHz reference crystal */
     ref25: ref25m {

Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml

@@ -34,6 +34,7 @@ properties:
               - mediatek,mt2712-apmixedsys
               - mediatek,mt6765-apmixedsys
               - mediatek,mt6779-apmixedsys
+              - mediatek,mt6795-apmixedsys
               - mediatek,mt7629-apmixedsys
               - mediatek,mt8167-apmixedsys
               - mediatek,mt8183-apmixedsys

Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };

Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system
+  configuration like reset and bus protection on MT6795.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt6795-apmixedsys
+          - mediatek,mt6795-infracfg
+          - mediatek,mt6795-pericfg
+          - mediatek,mt6795-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        topckgen: clock-controller@10000000 {
+            compatible = "mediatek,mt6795-topckgen", "syscon";
+            reg = <0 0x10000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };

Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml

@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml

@@ -33,6 +33,7 @@ properties:
               - mediatek,mt2712-topckgen
               - mediatek,mt6765-topckgen
               - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
               - mediatek,mt7629-topckgen
               - mediatek,mt7986-topckgen
               - mediatek,mt8167-topckgen

Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml

@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };

Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml#
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microchip PolarFire Clock Control Module Binding
@@ -40,8 +40,21 @@ properties:
     const: 1
     description: |
       The clock consumer should specify the desired clock by having the clock
-      ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h
-      for the full list of PolarFire clock IDs.
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
 
 required:
   - compatible

Documentation/devicetree/bindings/clock/qcom,a53pll.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm A53 PLL Binding
 
 maintainers:
-  - Sivaprakash Murugesan <sivaprak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description:
   The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
       - qcom,msm8916-a53pll
       - qcom,msm8939-a53pll
 

Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml

@@ -38,6 +38,15 @@ properties:
     description: child tsens device
     $ref: /schemas/thermal/qcom-tsens.yaml#
 
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
+
   nvmem-cells:
     minItems: 1
     maxItems: 2

Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml

@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks and resets on
+  MSM8660
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8660.h
+  - dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: "qcom,gcc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...

Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml

@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8909
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8909.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8909.h
+
+properties:
+  compatible:
+    const: qcom,gcc-msm8909
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...

Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml

@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8916 or MSM8939.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8916.h
+  - dt-bindings/clock/qcom,gcc-msm8939.h
+  - dt-bindings/reset/qcom,gcc-msm8916.h
+  - dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...

Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml

@@ -45,29 +45,16 @@ properties:
     description:
       Phandle to voltage regulator providing power to the GX domain.
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
   - vdd_gfx-supply
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml

@@ -32,28 +32,15 @@ properties:
       - const: xo
       - const: sleep
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml

@@ -49,30 +49,13 @@ properties:
       - const: ufs_rx_symbol_1_clk_src
       - const: ufs_tx_symbol_0_clk_src
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml

@@ -37,32 +37,15 @@ properties:
       - const: core_bi_pll_test_se # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml

@@ -18,11 +18,7 @@ description: |
   - dt-bindings/clock/qcom,gcc-ipq4019.h
   - dt-bindings/clock/qcom,gcc-ipq6018.h
   - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-msm8939.h
   - dt-bindings/clock/qcom,gcc-msm8953.h
-  - dt-bindings/reset/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
   - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
   - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
   - dt-bindings/clock/qcom,gcc-mdm9607.h
@@ -40,9 +36,6 @@ properties:
       - qcom,gcc-ipq6018
       - qcom,gcc-mdm9607
       - qcom,gcc-msm8226
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8939
       - qcom,gcc-msm8953
       - qcom,gcc-msm8974
       - qcom,gcc-msm8974pro

Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml

@@ -30,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml

@@ -33,32 +33,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml

@@ -44,28 +44,15 @@ properties:
       - const: ufs_phy_tx_symbol_0_clk
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml

@@ -32,32 +32,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml

@@ -33,7 +33,7 @@ properties:
       - description: Primary USB SuperSpeed pipe clock
       - description: USB4 PHY pipegmux clock source
       - description: USB4 PHY DP gmux clock source
-      - description: USB4 PHY sys piegmux clock source
+      - description: USB4 PHY sys pipegmux clock source
       - description: USB4 PHY PCIe pipe clock
       - description: USB4 PHY router max pipe clock
       - description: Primary USB4 RX0 clock
@@ -46,7 +46,7 @@ properties:
       - description: Second USB4 PHY router max pipe clock
       - description: Secondary USB4 RX0 clock
       - description: Secondary USB4 RX1 clock
-      - description: Multiport USB first SupserSpeed pipe clock
+      - description: Multiport USB first SuperSpeed pipe clock
       - description: Multiport USB second SuperSpeed pipe clock
       - description: PCIe 2a pipe clock
       - description: PCIe 2b pipe clock
@@ -56,30 +56,17 @@ properties:
       - description: First EMAC controller reference clock
       - description: Second EMAC controller reference clock
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
   protected-clocks:
     maxItems: 389
 
 required:
   - compatible
   - clocks
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml

@@ -19,51 +19,67 @@ description: |
 
 properties:
   compatible:
-    const: qcom,gcc-sdm845
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-      - description: PCIE 0 Pipe clock source
-      - description: PCIE 1 Pipe clock source
+    minItems: 3
+    maxItems: 5
 
   clock-names:
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
-      - const: pcie_0_pipe_clk
-      - const: pcie_1_pipe_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
+    minItems: 3
+    maxItems: 5
 
   power-domains:
     maxItems: 1
 
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
 
 examples:
   # Example for GCC for SDM845:

Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml

@@ -35,28 +35,15 @@ properties:
       - const: core_bi_pll_test_se # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml

@@ -20,9 +20,6 @@ properties:
   compatible:
     const: qcom,gcc-sdx65
 
-  reg:
-    maxItems: 1
-
   clocks:
     items:
       - description: Board XO source
@@ -43,25 +40,15 @@ properties:
       - const: core_bi_pll_test_se # Optional clock
     minItems: 5
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml

@@ -30,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml

@@ -30,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml

@@ -32,32 +32,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml

@@ -31,32 +31,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml

@@ -31,32 +31,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml

@@ -54,28 +54,15 @@ properties:
       - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml

@@ -46,28 +46,15 @@ properties:
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
-  - reg
   - clocks
   - clock-names
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/clock/qcom,gpucc.yaml

@@ -17,6 +17,7 @@ description: |
     dt-bindings/clock/qcom,gpucc-sdm845.h
     dt-bindings/clock/qcom,gpucc-sc7180.h
     dt-bindings/clock/qcom,gpucc-sc7280.h
+    dt-bindings/clock/qcom,gpucc-sc8280xp.h
     dt-bindings/clock/qcom,gpucc-sm6350.h
     dt-bindings/clock/qcom,gpucc-sm8150.h
     dt-bindings/clock/qcom,gpucc-sm8250.h
@@ -28,6 +29,7 @@ properties:
       - qcom,sc7180-gpucc
       - qcom,sc7280-gpucc
       - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
       - qcom,sm6350-gpucc
       - qcom,sm8150-gpucc
       - qcom,sm8250-gpucc

Documentation/devicetree/bindings/clock/qcom,mmcc.yaml

@@ -31,30 +31,12 @@ properties:
       - qcom,mmcc-sdm660
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board sleep source
-      - description: Global PLL 0 clock
-      - description: DSI phy instance 0 dsi clock
-      - description: DSI phy instance 0 byte clock
-      - description: DSI phy instance 1 dsi clock
-      - description: DSI phy instance 1 byte clock
-      - description: HDMI phy PLL clock
-      - description: DisplayPort phy PLL vco clock
-      - description: DisplayPort phy PLL link clock
+    minItems: 8
+    maxItems: 10
 
   clock-names:
-    items:
-      - const: xo
-      - const: sleep
-      - const: gpll0
-      - const: dsi0dsi
-      - const: dsi0byte
-      - const: dsi1dsi
-      - const: dsi1byte
-      - const: hdmipll
-      - const: dpvco
-      - const: dplink
+    minItems: 8
+    maxItems: 10
 
   '#clock-cells':
     const: 1
@@ -85,16 +67,179 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,mmcc-msm8998
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
 
-then:
-  required:
-    - clocks
-    - clock-names
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+            - description: Test clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+            - const: core_bi_pll_test_se
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
 
 examples:
   # Example for MMCC for MSM8960:

Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml

@@ -26,22 +26,18 @@ properties:
 
   clocks:
     items:
-      - description: Primary PLL clock for power cluster (little)
-      - description: Primary PLL clock for perf cluster (big)
-      - description: Alternate PLL clock for power cluster (little)
-      - description: Alternate PLL clock for perf cluster (big)
+      - description: XO source
 
   clock-names:
     items:
-      - const: pwrcl_pll
-      - const: perfcl_pll
-      - const: pwrcl_alt_pll
-      - const: perfcl_alt_pll
+      - const: xo
 
 required:
   - compatible
   - reg
   - '#clock-cells'
+  - clocks
+  - clock-names
 
 additionalProperties: false
 
@@ -51,4 +47,7 @@ examples:
         compatible = "qcom,msm8996-apcc";
         reg = <0x6400000 0x90000>;
         #clock-cells = <1>;
+
+        clocks = <&xo_board>;
+        clock-names = "xo";
     };

Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml

@@ -29,6 +29,7 @@ properties:
           - qcom,rpmcc-mdm9607
           - qcom,rpmcc-msm8226
           - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
           - qcom,rpmcc-msm8916
           - qcom,rpmcc-msm8936
           - qcom,rpmcc-msm8953
@@ -43,6 +44,7 @@ properties:
           - qcom,rpmcc-sdm660
           - qcom,rpmcc-sm6115
           - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
       - const: qcom,rpmcc
 
   '#clock-cells':

Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml

@@ -21,6 +21,7 @@ properties:
       - qcom,sc7280-rpmh-clk
       - qcom,sc8180x-rpmh-clk
       - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
       - qcom,sdx65-rpmh-clk

Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks and
+  power domains on SM6115.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...

Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SM6375
+
+  See also:
+  - dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...

Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml

@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains on SM8450.
+
+  See also:
+    include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...

Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml

@@ -47,7 +47,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 4
     maxItems: 4
 
   clock-names:
@@ -64,7 +63,6 @@ properties:
     maxItems: 1
 
   resets:
-    minItems: 2
     maxItems: 2
 
   reset-names:

Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml

@@ -24,7 +24,7 @@ description: |
 properties:
   compatible:
     enum:
-      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2}
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
       - renesas,r9a07g044-cpg # RZ/G2{L,LC}
       - renesas,r9a07g054-cpg # RZ/V2L
       - renesas,r9a09g011-cpg # RZ/V2M

Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml

@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock Device Tree Bindings
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };

Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt

@@ -1,58 +0,0 @@
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};

Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#

Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml

@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml

@@ -34,7 +34,6 @@ properties:
     const: 1
 
   clock-output-names:
-    minItems: 3
     maxItems: 3
     description: Names for AP, CP and BT clocks.
 

Documentation/devicetree/bindings/clock/ti/gate.txt

@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:

Documentation/devicetree/bindings/clock/ti/interface.txt

@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 
 Required properties:
 - compatible : shall be one of:

Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml

@@ -266,7 +266,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/lochnagar.h>
+    #include <dt-bindings/clock/lochnagar.h>
     #include <dt-bindings/pinctrl/lochnagar.h>
     i2c@e0004000 {
         #address-cells = <1>;

MAINTAINERS

@@ -4982,7 +4982,7 @@ F:	drivers/hwmon/lochnagar-hwmon.c
 F:	drivers/mfd/lochnagar-i2c.c
 F:	drivers/pinctrl/cirrus/pinctrl-lochnagar.c
 F:	drivers/regulator/lochnagar-regulator.c
-F:	include/dt-bindings/clk/lochnagar.h
+F:	include/dt-bindings/clock/lochnagar.h
 F:	include/dt-bindings/pinctrl/lochnagar.h
 F:	include/linux/mfd/lochnagar*
 F:	sound/soc/codecs/lochnagar-sc.c
@@ -17560,6 +17560,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
 F:	drivers/mtd/nand/raw/renesas-nand-controller.c
 
+RENESAS VERSACLOCK 7 CLOCK DRIVER
+M:	Alex Helms <alexander.helms.jy@renesas.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
+F:	drivers/clk/clk-versaclock7.c
+
 RESET CONTROLLER FRAMEWORK
 M:	Philipp Zabel <p.zabel@pengutronix.de>
 S:	Maintained
@@ -17661,6 +17667,7 @@ F:	drivers/clk/microchip/clk-mpfs.c
 F:	drivers/i2c/busses/i2c-microchip-core.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
+F:	drivers/reset/reset-mpfs.c
 F:	drivers/rtc/rtc-mpfs.c
 F:	drivers/soc/microchip/
 F:	drivers/spi/spi-microchip-core-qspi.c
@@ -18179,12 +18186,14 @@ Q:	https://patchwork.linuxtv.org/project/linux-media/list/
 F:	drivers/media/platform/samsung/exynos4-is/
 
 SAMSUNG SOC CLOCK DRIVERS
+M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 M:	Tomasz Figa <tomasz.figa@gmail.com>
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
 F:	Documentation/devicetree/bindings/clock/samsung,*.yaml
 F:	Documentation/devicetree/bindings/clock/samsung,s3c*
@@ -20469,6 +20478,7 @@ R:	Sekhar Nori <nsekhar@ti.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/ti/davinci/
 F:	drivers/clk/davinci/
+F:	include/linux/clk/davinci.h
 
 TI DAVINCI SERIES GPIO DRIVER
 M:	Keerthy <j-keerthy@ti.com>

arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

@@ -5,7 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
 
 / {
 	backlight_lvds: backlight-lvds {

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi

@@ -4,7 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
 
 / {
 	memory@48000000 {

drivers/clk/Kconfig

@@ -249,7 +249,7 @@ config COMMON_CLK_GEMINI
 	  platform, also known as SL3516 or CS3516.
 
 config COMMON_CLK_LAN966X
-	bool "Generic Clock Controller driver for LAN966X SoC"
+	tristate "Generic Clock Controller driver for LAN966X SoC"
 	depends on HAS_IOMEM
 	depends on OF
 	depends on SOC_LAN966 || COMPILE_TEST
@@ -377,6 +377,15 @@ config COMMON_CLK_VC5
 	  This driver supports the IDT VersaClock 5 and VersaClock 6
 	  programmable clock generators.
 
+config COMMON_CLK_VC7
+	tristate "Clock driver for Renesas Versaclock 7 devices"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	  Renesas Versaclock7 is a family of configurable clock generator
+	  and jitter attenuator ICs with fractional and integer dividers.
+
 config COMMON_CLK_STM32MP135
 	def_bool COMMON_CLK && MACH_STM32MP13
 	help

drivers/clk/Makefile

@@ -73,6 +73,7 @@ obj-$(CONFIG_CLK_TWL6040)		+= clk-twl6040.o
 obj-$(CONFIG_ARCH_VT8500)		+= clk-vt8500.o
 obj-$(CONFIG_COMMON_CLK_RS9_PCIE)	+= clk-renesas-pcie.o
 obj-$(CONFIG_COMMON_CLK_VC5)		+= clk-versaclock5.o
+obj-$(CONFIG_COMMON_CLK_VC7)		+= clk-versaclock7.o
 obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
 

drivers/clk/at91/dt-compat.c

@@ -33,8 +33,11 @@ static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
 	const char *name = np->name;
 	const char *parent_name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -56,8 +59,11 @@ static void __init of_sama5d2_clk_audio_pll_pad_setup(struct device_node *np)
 	const char *name = np->name;
 	const char *parent_name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -79,8 +85,11 @@ static void __init of_sama5d2_clk_audio_pll_pmc_setup(struct device_node *np)
 	const char *name = np->name;
 	const char *parent_name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -120,7 +129,7 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
 	struct clk_hw *hw;
 	unsigned int num_parents;
 	const char *parent_names[GENERATED_SOURCE_MAX];
-	struct device_node *gcknp;
+	struct device_node *gcknp, *parent_np;
 	struct clk_range range = CLK_RANGE(0, 0);
 	struct regmap *regmap;
 
@@ -134,7 +143,9 @@ static void __init of_sama5d2_clk_generated_setup(struct device_node *np)
 	if (!num || num > PERIPHERAL_MAX)
 		return;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -180,8 +191,11 @@ static void __init of_sama5d4_clk_h32mx_setup(struct device_node *np)
 	const char *name = np->name;
 	const char *parent_name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -243,12 +257,15 @@ static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
 	const char *parent_name;
 	struct regmap *regmap;
 	bool bypass;
+	struct device_node *parent_np;
 
 	of_property_read_string(np, "clock-output-names", &name);
 	bypass = of_property_read_bool(np, "atmel,osc-bypass");
 	parent_name = of_clk_get_parent_name(np, 0);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -268,12 +285,15 @@ static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
 	u32 accuracy = 0;
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	of_property_read_string(np, "clock-output-names", &name);
 	of_property_read_u32(np, "clock-frequency", &frequency);
 	of_property_read_u32(np, "clock-accuracy", &accuracy);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -292,11 +312,14 @@ static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
 	const char *parent_name;
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -316,13 +339,16 @@ static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
 	unsigned int num_parents;
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents == 0 || num_parents > 2)
 		return;
 
 	of_clk_parent_fill(np, parent_names, num_parents);
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -373,6 +399,7 @@ of_at91_clk_master_setup(struct device_node *np,
 	const char *name = np->name;
 	struct clk_master_characteristics *characteristics;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
@@ -386,7 +413,9 @@ of_at91_clk_master_setup(struct device_node *np,
 	if (!characteristics)
 		return;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -433,6 +462,7 @@ of_at91_clk_periph_setup(struct device_node *np, u8 type)
 	const char *name;
 	struct device_node *periphclknp;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 	if (!parent_name)
@@ -442,7 +472,9 @@ of_at91_clk_periph_setup(struct device_node *np, u8 type)
 	if (!num || num > PERIPHERAL_MAX)
 		return;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -601,6 +633,7 @@ of_at91_clk_pll_setup(struct device_node *np,
 	struct regmap *regmap;
 	const char *parent_name;
 	const char *name = np->name;
+	struct device_node *parent_np;
 	struct clk_pll_characteristics *characteristics;
 
 	if (of_property_read_u32(np, "reg", &id))
@@ -610,7 +643,9 @@ of_at91_clk_pll_setup(struct device_node *np,
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -665,12 +700,15 @@ of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
 	const char *parent_name;
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -694,7 +732,7 @@ of_at91_clk_prog_setup(struct device_node *np,
 	unsigned int num_parents;
 	const char *parent_names[PROG_SOURCE_MAX];
 	const char *name;
-	struct device_node *progclknp;
+	struct device_node *progclknp, *parent_np;
 	struct regmap *regmap;
 
 	num_parents = of_clk_get_parent_count(np);
@@ -707,7 +745,9 @@ of_at91_clk_prog_setup(struct device_node *np,
 	if (!num || num > (PROG_ID_MAX + 1))
 		return;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -756,13 +796,16 @@ static void __init of_at91sam9260_clk_slow_setup(struct device_node *np)
 	unsigned int num_parents;
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents != 2)
 		return;
 
 	of_clk_parent_fill(np, parent_names, num_parents);
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -788,6 +831,7 @@ static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
 	const char *parent_names[SMD_SOURCE_MAX];
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
@@ -797,7 +841,9 @@ static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -818,7 +864,7 @@ static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
 	u32 id;
 	struct clk_hw *hw;
 	const char *name;
-	struct device_node *sysclknp;
+	struct device_node *sysclknp, *parent_np;
 	const char *parent_name;
 	struct regmap *regmap;
 
@@ -826,7 +872,9 @@ static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
 	if (num > (SYSTEM_MAX_ID + 1))
 		return;
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -859,6 +907,7 @@ static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
 	const char *parent_names[USB_SOURCE_MAX];
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	num_parents = of_clk_get_parent_count(np);
 	if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
@@ -868,7 +917,9 @@ static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -888,6 +939,7 @@ static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
 	const char *parent_name;
 	const char *name = np->name;
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 	if (!parent_name)
@@ -895,7 +947,9 @@ static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 
@@ -915,6 +969,7 @@ static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
 	const char *name = np->name;
 	u32 divisors[4] = {0, 0, 0, 0};
 	struct regmap *regmap;
+	struct device_node *parent_np;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 	if (!parent_name)
@@ -926,7 +981,9 @@ static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap))
 		return;
 	hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
@@ -946,12 +1003,15 @@ static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
 	const char *parent_name;
 	const char *name = np->name;
 	struct regmap *regmap_pmc, *regmap_sfr;
+	struct device_node *parent_np;
 
 	parent_name = of_clk_get_parent_name(np, 0);
 
 	of_property_read_string(np, "clock-output-names", &name);
 
-	regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap_pmc = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap_pmc))
 		return;
 

drivers/clk/at91/sama5d2.c

@@ -120,6 +120,16 @@ static const struct {
 	struct clk_range r;
 	int chg_pid;
 } sama5d2_gck[] = {
+	{ .n = "flx0_gclk",   .id = 19, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx1_gclk",   .id = 20, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx2_gclk",   .id = 21, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx3_gclk",   .id = 22, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "flx4_gclk",   .id = 23, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart0_gclk",  .id = 24, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart1_gclk",  .id = 25, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart2_gclk",  .id = 26, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart3_gclk",  .id = 27, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
+	{ .n = "uart4_gclk",  .id = 28, .chg_pid = INT_MIN, .r = { .min = 0, .max = 27666666 }, },
 	{ .n = "sdmmc0_gclk", .id = 31, .chg_pid = INT_MIN, },
 	{ .n = "sdmmc1_gclk", .id = 32, .chg_pid = INT_MIN, },
 	{ .n = "tcb0_gclk",   .id = 35, .chg_pid = INT_MIN, .r = { .min = 0, .max = 83000000 }, },

drivers/clk/baikal-t1/Kconfig

@@ -29,7 +29,6 @@ config CLK_BT1_CCU_PLL
 
 config CLK_BT1_CCU_DIV
 	bool "Baikal-T1 CCU Dividers support"
-	select RESET_CONTROLLER
 	select MFD_SYSCON
 	default MIPS_BAIKAL_T1
 	help
@@ -39,4 +38,15 @@ config CLK_BT1_CCU_DIV
 	  either gateable or ungateable. Some of the CCU dividers can be as well
 	  used to reset the domains they're supplying clock to.
 
+config CLK_BT1_CCU_RST
+	bool "Baikal-T1 CCU Resets support"
+	select RESET_CONTROLLER
+	select MFD_SYSCON
+	default MIPS_BAIKAL_T1
+	help
+	  Enable this to support the CCU reset blocks responsible for the
+	  AXI-bus and some subsystems reset. These are mainly the
+	  self-deasserted reset controls but there are several lines which
+	  can be directly asserted/de-asserted (PCIe and DDR sub-domains).
+
 endif

drivers/clk/baikal-t1/Makefile

@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CLK_BT1_CCU_PLL) += ccu-pll.o clk-ccu-pll.o
 obj-$(CONFIG_CLK_BT1_CCU_DIV) += ccu-div.o clk-ccu-div.o
+obj-$(CONFIG_CLK_BT1_CCU_RST) += ccu-rst.o

drivers/clk/baikal-t1/ccu-div.c

@@ -34,9 +34,9 @@
 #define CCU_DIV_CTL_CLKDIV_MASK(_width) \
 	GENMASK((_width) + CCU_DIV_CTL_CLKDIV_FLD - 1, CCU_DIV_CTL_CLKDIV_FLD)
 #define CCU_DIV_CTL_LOCK_SHIFTED	BIT(27)
+#define CCU_DIV_CTL_GATE_REF_BUF	BIT(28)
 #define CCU_DIV_CTL_LOCK_NORMAL		BIT(31)
 
-#define CCU_DIV_RST_DELAY_US		1
 #define CCU_DIV_LOCK_CHECK_RETRIES	50
 
 #define CCU_DIV_CLKDIV_MIN		0
@@ -170,6 +170,40 @@ static int ccu_div_gate_is_enabled(struct clk_hw *hw)
 	return !!(val & CCU_DIV_CTL_EN);
 }
 
+static int ccu_div_buf_enable(struct clk_hw *hw)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&div->lock, flags);
+	regmap_update_bits(div->sys_regs, div->reg_ctl,
+			   CCU_DIV_CTL_GATE_REF_BUF, 0);
+	spin_unlock_irqrestore(&div->lock, flags);
+
+	return 0;
+}
+
+static void ccu_div_buf_disable(struct clk_hw *hw)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	unsigned long flags;
+
+	spin_lock_irqsave(&div->lock, flags);
+	regmap_update_bits(div->sys_regs, div->reg_ctl,
+			   CCU_DIV_CTL_GATE_REF_BUF, CCU_DIV_CTL_GATE_REF_BUF);
+	spin_unlock_irqrestore(&div->lock, flags);
+}
+
+static int ccu_div_buf_is_enabled(struct clk_hw *hw)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	u32 val = 0;
+
+	regmap_read(div->sys_regs, div->reg_ctl, &val);
+
+	return !(val & CCU_DIV_CTL_GATE_REF_BUF);
+}
+
 static unsigned long ccu_div_var_recalc_rate(struct clk_hw *hw,
 					     unsigned long parent_rate)
 {
@@ -288,24 +322,6 @@ static int ccu_div_fixed_set_rate(struct clk_hw *hw, unsigned long rate,
 	return 0;
 }
 
-int ccu_div_reset_domain(struct ccu_div *div)
-{
-	unsigned long flags;
-
-	if (!div || !(div->features & CCU_DIV_RESET_DOMAIN))
-		return -EINVAL;
-
-	spin_lock_irqsave(&div->lock, flags);
-	regmap_update_bits(div->sys_regs, div->reg_ctl,
-			   CCU_DIV_CTL_RST, CCU_DIV_CTL_RST);
-	spin_unlock_irqrestore(&div->lock, flags);
-
-	/* The next delay must be enough to cover all the resets. */
-	udelay(CCU_DIV_RST_DELAY_US);
-
-	return 0;
-}
-
 #ifdef CONFIG_DEBUG_FS
 
 struct ccu_div_dbgfs_bit {
@@ -323,6 +339,7 @@ static const struct ccu_div_dbgfs_bit ccu_div_bits[] = {
 	CCU_DIV_DBGFS_BIT_ATTR("div_en", CCU_DIV_CTL_EN),
 	CCU_DIV_DBGFS_BIT_ATTR("div_rst", CCU_DIV_CTL_RST),
 	CCU_DIV_DBGFS_BIT_ATTR("div_bypass", CCU_DIV_CTL_SET_CLKDIV),
+	CCU_DIV_DBGFS_BIT_ATTR("div_buf", CCU_DIV_CTL_GATE_REF_BUF),
 	CCU_DIV_DBGFS_BIT_ATTR("div_lock", CCU_DIV_CTL_LOCK_NORMAL)
 };
 
@@ -441,6 +458,9 @@ static void ccu_div_var_debug_init(struct clk_hw *hw, struct dentry *dentry)
 			continue;
 		}
 
+		if (!strcmp("div_buf", name))
+			continue;
+
 		bits[didx] = ccu_div_bits[bidx];
 		bits[didx].div = div;
 
@@ -477,6 +497,21 @@ static void ccu_div_gate_debug_init(struct clk_hw *hw, struct dentry *dentry)
 				   &ccu_div_dbgfs_fixed_clkdiv_fops);
 }
 
+static void ccu_div_buf_debug_init(struct clk_hw *hw, struct dentry *dentry)
+{
+	struct ccu_div *div = to_ccu_div(hw);
+	struct ccu_div_dbgfs_bit *bit;
+
+	bit = kmalloc(sizeof(*bit), GFP_KERNEL);
+	if (!bit)
+		return;
+
+	*bit = ccu_div_bits[3];
+	bit->div = div;
+	debugfs_create_file_unsafe(bit->name, ccu_div_dbgfs_mode, dentry, bit,
+				   &ccu_div_dbgfs_bit_fops);
+}
+
 static void ccu_div_fixed_debug_init(struct clk_hw *hw, struct dentry *dentry)
 {
 	struct ccu_div *div = to_ccu_div(hw);
@@ -489,6 +524,7 @@ static void ccu_div_fixed_debug_init(struct clk_hw *hw, struct dentry *dentry)
 
 #define ccu_div_var_debug_init NULL
 #define ccu_div_gate_debug_init NULL
+#define ccu_div_buf_debug_init NULL
 #define ccu_div_fixed_debug_init NULL
 
 #endif /* !CONFIG_DEBUG_FS */
@@ -520,6 +556,13 @@ static const struct clk_ops ccu_div_gate_ops = {
 	.debug_init = ccu_div_gate_debug_init
 };
 
+static const struct clk_ops ccu_div_buf_ops = {
+	.enable = ccu_div_buf_enable,
+	.disable = ccu_div_buf_disable,
+	.is_enabled = ccu_div_buf_is_enabled,
+	.debug_init = ccu_div_buf_debug_init
+};
+
 static const struct clk_ops ccu_div_fixed_ops = {
 	.recalc_rate = ccu_div_fixed_recalc_rate,
 	.round_rate = ccu_div_fixed_round_rate,
@@ -566,6 +609,8 @@ struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *div_init)
 	} else if (div_init->type == CCU_DIV_GATE) {
 		hw_init.ops = &ccu_div_gate_ops;
 		div->divider = div_init->divider;
+	} else if (div_init->type == CCU_DIV_BUF) {
+		hw_init.ops = &ccu_div_buf_ops;
 	} else if (div_init->type == CCU_DIV_FIXED) {
 		hw_init.ops = &ccu_div_fixed_ops;
 		div->divider = div_init->divider;
@@ -579,6 +624,7 @@ struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *div_init)
 		goto err_free_div;
 	}
 	parent_data.fw_name = div_init->parent_name;
+	parent_data.name = div_init->parent_name;
 	hw_init.parent_data = &parent_data;
 	hw_init.num_parents = 1;
 

drivers/clk/baikal-t1/ccu-div.h

@@ -13,15 +13,26 @@
 #include <linux/bits.h>
 #include <linux/of.h>
 
+/*
+ * CCU Divider private clock IDs
+ * @CCU_SYS_SATA_CLK: CCU SATA internal clock
+ * @CCU_SYS_XGMAC_CLK: CCU XGMAC internal clock
+ */
+#define CCU_SYS_SATA_CLK		-1
+#define CCU_SYS_XGMAC_CLK		-2
+
 /*
  * CCU Divider private flags
+ * @CCU_DIV_BASIC: Basic divider clock required by the kernel as early as
+ *		   possible.
  * @CCU_DIV_SKIP_ONE: Due to some reason divider can't be set to 1.
  *		      It can be 0 though, which is functionally the same.
  * @CCU_DIV_SKIP_ONE_TO_THREE: For some reason divider can't be within [1,3].
  *			       It can be either 0 or greater than 3.
  * @CCU_DIV_LOCK_SHIFTED: Find lock-bit at non-standard position.
- * @CCU_DIV_RESET_DOMAIN: Provide reset clock domain method.
+ * @CCU_DIV_RESET_DOMAIN: There is a clock domain reset handle.
  */
+#define CCU_DIV_BASIC			BIT(0)
 #define CCU_DIV_SKIP_ONE		BIT(1)
 #define CCU_DIV_SKIP_ONE_TO_THREE	BIT(2)
 #define CCU_DIV_LOCK_SHIFTED		BIT(3)
@@ -31,11 +42,13 @@
  * enum ccu_div_type - CCU Divider types
  * @CCU_DIV_VAR: Clocks gate with variable divider.
  * @CCU_DIV_GATE: Clocks gate with fixed divider.
+ * @CCU_DIV_BUF: Clock gate with no divider.
  * @CCU_DIV_FIXED: Ungateable clock with fixed divider.
  */
 enum ccu_div_type {
 	CCU_DIV_VAR,
 	CCU_DIV_GATE,
+	CCU_DIV_BUF,
 	CCU_DIV_FIXED
 };
 
@@ -105,6 +118,4 @@ struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *init);
 
 void ccu_div_hw_unregister(struct ccu_div *div);
 
-int ccu_div_reset_domain(struct ccu_div *div);
-
 #endif /* __CLK_BT1_CCU_DIV_H__ */

drivers/clk/baikal-t1/ccu-pll.h

@@ -13,6 +13,12 @@
 #include <linux/bits.h>
 #include <linux/of.h>
 
+/*
+ * CCU PLL private flags
+ * @CCU_PLL_BASIC: Basic PLL required by the kernel as early as possible.
+ */
+#define CCU_PLL_BASIC		BIT(0)
+
 /*
  * struct ccu_pll_init_data - CCU PLL initialization data
  * @id: Clock private identifier.
@@ -22,6 +28,7 @@
  * @sys_regs: Baikal-T1 System Controller registers map.
  * @np: Pointer to the node describing the CCU PLLs.
  * @flags: PLL clock flags.
+ * @features: PLL private features.
  */
 struct ccu_pll_init_data {
 	unsigned int id;
@@ -31,6 +38,7 @@ struct ccu_pll_init_data {
 	struct regmap *sys_regs;
 	struct device_node *np;
 	unsigned long flags;
+	unsigned long features;
 };
 
 /*

drivers/clk/baikal-t1/ccu-rst.c

@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 BAIKAL ELECTRONICS, JSC
+ *
+ * Authors:
+ *   Serge Semin <Sergey.Semin@baikalelectronics.ru>
+ *
+ * Baikal-T1 CCU Resets interface driver
+ */
+
+#define pr_fmt(fmt) "bt1-ccu-rst: " fmt
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/printk.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/reset/bt1-ccu.h>
+
+#include "ccu-rst.h"
+
+#define CCU_AXI_MAIN_BASE		0x030
+#define CCU_AXI_DDR_BASE		0x034
+#define CCU_AXI_SATA_BASE		0x038
+#define CCU_AXI_GMAC0_BASE		0x03C
+#define CCU_AXI_GMAC1_BASE		0x040
+#define CCU_AXI_XGMAC_BASE		0x044
+#define CCU_AXI_PCIE_M_BASE		0x048
+#define CCU_AXI_PCIE_S_BASE		0x04C
+#define CCU_AXI_USB_BASE		0x050
+#define CCU_AXI_HWA_BASE		0x054
+#define CCU_AXI_SRAM_BASE		0x058
+
+#define CCU_SYS_DDR_BASE		0x02c
+#define CCU_SYS_SATA_REF_BASE		0x060
+#define CCU_SYS_APB_BASE		0x064
+#define CCU_SYS_PCIE_BASE		0x144
+
+#define CCU_RST_DELAY_US		1
+
+#define CCU_RST_TRIG(_base, _ofs)		\
+	{					\
+		.type = CCU_RST_TRIG,		\
+		.base = _base,			\
+		.mask = BIT(_ofs),		\
+	}
+
+#define CCU_RST_DIR(_base, _ofs)		\
+	{					\
+		.type = CCU_RST_DIR,		\
+		.base = _base,			\
+		.mask = BIT(_ofs),		\
+	}
+
+struct ccu_rst_info {
+	enum ccu_rst_type type;
+	unsigned int base;
+	unsigned int mask;
+};
+
+/*
+ * Each AXI-bus clock divider is equipped with the corresponding clock-consumer
+ * domain reset (it's self-deasserted reset control).
+ */
+static const struct ccu_rst_info axi_rst_info[] = {
+	[CCU_AXI_MAIN_RST] = CCU_RST_TRIG(CCU_AXI_MAIN_BASE, 1),
+	[CCU_AXI_DDR_RST] = CCU_RST_TRIG(CCU_AXI_DDR_BASE, 1),
+	[CCU_AXI_SATA_RST] = CCU_RST_TRIG(CCU_AXI_SATA_BASE, 1),
+	[CCU_AXI_GMAC0_RST] = CCU_RST_TRIG(CCU_AXI_GMAC0_BASE, 1),
+	[CCU_AXI_GMAC1_RST] = CCU_RST_TRIG(CCU_AXI_GMAC1_BASE, 1),
+	[CCU_AXI_XGMAC_RST] = CCU_RST_TRIG(CCU_AXI_XGMAC_BASE, 1),
+	[CCU_AXI_PCIE_M_RST] = CCU_RST_TRIG(CCU_AXI_PCIE_M_BASE, 1),
+	[CCU_AXI_PCIE_S_RST] = CCU_RST_TRIG(CCU_AXI_PCIE_S_BASE, 1),
+	[CCU_AXI_USB_RST] = CCU_RST_TRIG(CCU_AXI_USB_BASE, 1),
+	[CCU_AXI_HWA_RST] = CCU_RST_TRIG(CCU_AXI_HWA_BASE, 1),
+	[CCU_AXI_SRAM_RST] = CCU_RST_TRIG(CCU_AXI_SRAM_BASE, 1),
+};
+
+/*
+ * SATA reference clock domain and APB-bus domain are connected with the
+ * sefl-deasserted reset control, which can be activated via the corresponding
+ * clock divider register. DDR and PCIe sub-domains can be reset with directly
+ * controlled reset signals. Resetting the DDR controller though won't end up
+ * well while the Linux kernel is working.
+ */
+static const struct ccu_rst_info sys_rst_info[] = {
+	[CCU_SYS_SATA_REF_RST] = CCU_RST_TRIG(CCU_SYS_SATA_REF_BASE, 1),
+	[CCU_SYS_APB_RST] = CCU_RST_TRIG(CCU_SYS_APB_BASE, 1),
+	[CCU_SYS_DDR_FULL_RST] = CCU_RST_DIR(CCU_SYS_DDR_BASE, 1),
+	[CCU_SYS_DDR_INIT_RST] = CCU_RST_DIR(CCU_SYS_DDR_BASE, 2),
+	[CCU_SYS_PCIE_PCS_PHY_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 0),
+	[CCU_SYS_PCIE_PIPE0_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 4),
+	[CCU_SYS_PCIE_CORE_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 8),
+	[CCU_SYS_PCIE_PWR_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 9),
+	[CCU_SYS_PCIE_STICKY_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 10),
+	[CCU_SYS_PCIE_NSTICKY_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 11),
+	[CCU_SYS_PCIE_HOT_RST] = CCU_RST_DIR(CCU_SYS_PCIE_BASE, 12),
+};
+
+static int ccu_rst_reset(struct reset_controller_dev *rcdev, unsigned long idx)
+{
+	struct ccu_rst *rst = to_ccu_rst(rcdev);
+	const struct ccu_rst_info *info = &rst->rsts_info[idx];
+
+	if (info->type != CCU_RST_TRIG)
+		return -EOPNOTSUPP;
+
+	regmap_update_bits(rst->sys_regs, info->base, info->mask, info->mask);
+
+	/* The next delay must be enough to cover all the resets. */
+	udelay(CCU_RST_DELAY_US);
+
+	return 0;
+}
+
+static int ccu_rst_set(struct reset_controller_dev *rcdev,
+		       unsigned long idx, bool high)
+{
+	struct ccu_rst *rst = to_ccu_rst(rcdev);
+	const struct ccu_rst_info *info = &rst->rsts_info[idx];
+
+	if (info->type != CCU_RST_DIR)
+		return high ? -EOPNOTSUPP : 0;
+
+	return regmap_update_bits(rst->sys_regs, info->base,
+				  info->mask, high ? info->mask : 0);
+}
+
+static int ccu_rst_assert(struct reset_controller_dev *rcdev,
+			  unsigned long idx)
+{
+	return ccu_rst_set(rcdev, idx, true);
+}
+
+static int ccu_rst_deassert(struct reset_controller_dev *rcdev,
+			    unsigned long idx)
+{
+	return ccu_rst_set(rcdev, idx, false);
+}
+
+static int ccu_rst_status(struct reset_controller_dev *rcdev,
+			  unsigned long idx)
+{
+	struct ccu_rst *rst = to_ccu_rst(rcdev);
+	const struct ccu_rst_info *info = &rst->rsts_info[idx];
+	u32 val;
+
+	if (info->type != CCU_RST_DIR)
+		return -EOPNOTSUPP;
+
+	regmap_read(rst->sys_regs, info->base, &val);
+
+	return !!(val & info->mask);
+}
+
+static const struct reset_control_ops ccu_rst_ops = {
+	.reset = ccu_rst_reset,
+	.assert = ccu_rst_assert,
+	.deassert = ccu_rst_deassert,
+	.status = ccu_rst_status,
+};
+
+struct ccu_rst *ccu_rst_hw_register(const struct ccu_rst_init_data *rst_init)
+{
+	struct ccu_rst *rst;
+	int ret;
+
+	if (!rst_init)
+		return ERR_PTR(-EINVAL);
+
+	rst = kzalloc(sizeof(*rst), GFP_KERNEL);
+	if (!rst)
+		return ERR_PTR(-ENOMEM);
+
+	rst->sys_regs = rst_init->sys_regs;
+	if (of_device_is_compatible(rst_init->np, "baikal,bt1-ccu-axi")) {
+		rst->rcdev.nr_resets = ARRAY_SIZE(axi_rst_info);
+		rst->rsts_info = axi_rst_info;
+	} else if (of_device_is_compatible(rst_init->np, "baikal,bt1-ccu-sys")) {
+		rst->rcdev.nr_resets = ARRAY_SIZE(sys_rst_info);
+		rst->rsts_info = sys_rst_info;
+	} else {
+		pr_err("Incompatible DT node '%s' specified\n",
+		       of_node_full_name(rst_init->np));
+		ret = -EINVAL;
+		goto err_kfree_rst;
+	}
+
+	rst->rcdev.owner = THIS_MODULE;
+	rst->rcdev.ops = &ccu_rst_ops;
+	rst->rcdev.of_node = rst_init->np;
+
+	ret = reset_controller_register(&rst->rcdev);
+	if (ret) {
+		pr_err("Couldn't register '%s' reset controller\n",
+		       of_node_full_name(rst_init->np));
+		goto err_kfree_rst;
+	}
+
+	return rst;
+
+err_kfree_rst:
+	kfree(rst);
+
+	return ERR_PTR(ret);
+}
+
+void ccu_rst_hw_unregister(struct ccu_rst *rst)
+{
+	reset_controller_unregister(&rst->rcdev);
+
+	kfree(rst);
+}

drivers/clk/baikal-t1/ccu-rst.h

@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 BAIKAL ELECTRONICS, JSC
+ *
+ * Baikal-T1 CCU Resets interface driver
+ */
+#ifndef __CLK_BT1_CCU_RST_H__
+#define __CLK_BT1_CCU_RST_H__
+
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+struct ccu_rst_info;
+
+/*
+ * enum ccu_rst_type - CCU Reset types
+ * @CCU_RST_TRIG: Self-deasserted reset signal.
+ * @CCU_RST_DIR: Directly controlled reset signal.
+ */
+enum ccu_rst_type {
+	CCU_RST_TRIG,
+	CCU_RST_DIR,
+};
+
+/*
+ * struct ccu_rst_init_data - CCU Resets initialization data
+ * @sys_regs: Baikal-T1 System Controller registers map.
+ * @np: Pointer to the node with the System CCU block.
+ */
+struct ccu_rst_init_data {
+	struct regmap *sys_regs;
+	struct device_node *np;
+};
+
+/*
+ * struct ccu_rst - CCU Reset descriptor
+ * @rcdev: Reset controller descriptor.
+ * @sys_regs: Baikal-T1 System Controller registers map.
+ * @rsts_info: Reset flag info (base address and mask).
+ */
+struct ccu_rst {
+	struct reset_controller_dev rcdev;
+	struct regmap *sys_regs;
+	const struct ccu_rst_info *rsts_info;
+};
+#define to_ccu_rst(_rcdev) container_of(_rcdev, struct ccu_rst, rcdev)
+
+#ifdef CONFIG_CLK_BT1_CCU_RST
+
+struct ccu_rst *ccu_rst_hw_register(const struct ccu_rst_init_data *init);
+
+void ccu_rst_hw_unregister(struct ccu_rst *rst);
+
+#else
+
+static inline
+struct ccu_rst *ccu_rst_hw_register(const struct ccu_rst_init_data *init)
+{
+	return NULL;
+}
+
+static inline void ccu_rst_hw_unregister(struct ccu_rst *rst) {}
+
+#endif
+
+#endif /* __CLK_BT1_CCU_RST_H__ */

drivers/clk/baikal-t1/clk-ccu-div.c

@@ -12,6 +12,7 @@
 #define pr_fmt(fmt) "bt1-ccu-div: " fmt
 
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 #include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
@@ -24,9 +25,9 @@
 #include <linux/regmap.h>
 
 #include <dt-bindings/clock/bt1-ccu.h>
-#include <dt-bindings/reset/bt1-ccu.h>
 
 #include "ccu-div.h"
+#include "ccu-rst.h"
 
 #define CCU_AXI_MAIN_BASE		0x030
 #define CCU_AXI_DDR_BASE		0x034
@@ -76,6 +77,16 @@
 		.divider = _divider				\
 	}
 
+#define CCU_DIV_BUF_INFO(_id, _name, _pname, _base, _flags)	\
+	{							\
+		.id = _id,					\
+		.name = _name,					\
+		.parent_name = _pname,				\
+		.base = _base,					\
+		.type = CCU_DIV_BUF,				\
+		.flags = _flags					\
+	}
+
 #define CCU_DIV_FIXED_INFO(_id, _name, _pname, _divider)	\
 	{							\
 		.id = _id,					\
@@ -85,12 +96,6 @@
 		.divider = _divider				\
 	}
 
-#define CCU_DIV_RST_MAP(_rst_id, _clk_id)	\
-	{					\
-		.rst_id = _rst_id,		\
-		.clk_id = _clk_id		\
-	}
-
 struct ccu_div_info {
 	unsigned int id;
 	const char *name;
@@ -105,11 +110,6 @@ struct ccu_div_info {
 	unsigned long features;
 };
 
-struct ccu_div_rst_map {
-	unsigned int rst_id;
-	unsigned int clk_id;
-};
-
 struct ccu_div_data {
 	struct device_node *np;
 	struct regmap *sys_regs;
@@ -118,11 +118,8 @@ struct ccu_div_data {
 	const struct ccu_div_info *divs_info;
 	struct ccu_div **divs;
 
-	unsigned int rst_num;
-	const struct ccu_div_rst_map *rst_map;
-	struct reset_controller_dev rcdev;
+	struct ccu_rst *rsts;
 };
-#define to_ccu_div_data(_rcdev) container_of(_rcdev, struct ccu_div_data, rcdev)
 
 /*
  * AXI Main Interconnect (axi_main_clk) and DDR AXI-bus (axi_ddr_clk) clocks
@@ -169,33 +166,22 @@ static const struct ccu_div_info axi_info[] = {
 			 CLK_SET_RATE_GATE, CCU_DIV_RESET_DOMAIN)
 };
 
-static const struct ccu_div_rst_map axi_rst_map[] = {
-	CCU_DIV_RST_MAP(CCU_AXI_MAIN_RST, CCU_AXI_MAIN_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_DDR_RST, CCU_AXI_DDR_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_SATA_RST, CCU_AXI_SATA_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_GMAC0_RST, CCU_AXI_GMAC0_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_GMAC1_RST, CCU_AXI_GMAC1_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_XGMAC_RST, CCU_AXI_XGMAC_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_PCIE_M_RST, CCU_AXI_PCIE_M_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_PCIE_S_RST, CCU_AXI_PCIE_S_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_USB_RST, CCU_AXI_USB_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_HWA_RST, CCU_AXI_HWA_CLK),
-	CCU_DIV_RST_MAP(CCU_AXI_SRAM_RST, CCU_AXI_SRAM_CLK)
-};
-
 /*
  * APB-bus clock is marked as critical since it's a main communication bus
  * for the SoC devices registers IO-operations.
  */
 static const struct ccu_div_info sys_info[] = {
-	CCU_DIV_VAR_INFO(CCU_SYS_SATA_REF_CLK, "sys_sata_ref_clk",
+	CCU_DIV_VAR_INFO(CCU_SYS_SATA_CLK, "sys_sata_clk",
 			 "sata_clk", CCU_SYS_SATA_REF_BASE, 4,
 			 CLK_SET_RATE_GATE,
 			 CCU_DIV_SKIP_ONE | CCU_DIV_LOCK_SHIFTED |
 			 CCU_DIV_RESET_DOMAIN),
+	CCU_DIV_BUF_INFO(CCU_SYS_SATA_REF_CLK, "sys_sata_ref_clk",
+			 "sys_sata_clk", CCU_SYS_SATA_REF_BASE,
+			 CLK_SET_RATE_PARENT),
 	CCU_DIV_VAR_INFO(CCU_SYS_APB_CLK, "sys_apb_clk",
 			 "pcie_clk", CCU_SYS_APB_BASE, 5,
-			 CLK_IS_CRITICAL, CCU_DIV_RESET_DOMAIN),
+			 CLK_IS_CRITICAL, CCU_DIV_BASIC | CCU_DIV_RESET_DOMAIN),
 	CCU_DIV_GATE_INFO(CCU_SYS_GMAC0_TX_CLK, "sys_gmac0_tx_clk",
 			  "eth_clk", CCU_SYS_GMAC0_BASE, 5),
 	CCU_DIV_FIXED_INFO(CCU_SYS_GMAC0_PTP_CLK, "sys_gmac0_ptp_clk",
@@ -204,10 +190,12 @@ static const struct ccu_div_info sys_info[] = {
 			  "eth_clk", CCU_SYS_GMAC1_BASE, 5),
 	CCU_DIV_FIXED_INFO(CCU_SYS_GMAC1_PTP_CLK, "sys_gmac1_ptp_clk",
 			   "eth_clk", 10),
-	CCU_DIV_GATE_INFO(CCU_SYS_XGMAC_REF_CLK, "sys_xgmac_ref_clk",
-			  "eth_clk", CCU_SYS_XGMAC_BASE, 8),
+	CCU_DIV_GATE_INFO(CCU_SYS_XGMAC_CLK, "sys_xgmac_clk",
+			  "eth_clk", CCU_SYS_XGMAC_BASE, 1),
+	CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_REF_CLK, "sys_xgmac_ref_clk",
+			   "sys_xgmac_clk", 8),
 	CCU_DIV_FIXED_INFO(CCU_SYS_XGMAC_PTP_CLK, "sys_xgmac_ptp_clk",
-			   "eth_clk", 10),
+			   "sys_xgmac_clk", 8),
 	CCU_DIV_GATE_INFO(CCU_SYS_USB_CLK, "sys_usb_clk",
 			  "eth_clk", CCU_SYS_USB_BASE, 10),
 	CCU_DIV_VAR_INFO(CCU_SYS_PVT_CLK, "sys_pvt_clk",
@@ -227,74 +215,58 @@ static const struct ccu_div_info sys_info[] = {
 			   "ref_clk", 25),
 	CCU_DIV_VAR_INFO(CCU_SYS_TIMER0_CLK, "sys_timer0_clk",
 			 "ref_clk", CCU_SYS_TIMER0_BASE, 17,
-			 CLK_SET_RATE_GATE, 0),
+			 CLK_SET_RATE_GATE, CCU_DIV_BASIC),
 	CCU_DIV_VAR_INFO(CCU_SYS_TIMER1_CLK, "sys_timer1_clk",
 			 "ref_clk", CCU_SYS_TIMER1_BASE, 17,
-			 CLK_SET_RATE_GATE, 0),
+			 CLK_SET_RATE_GATE, CCU_DIV_BASIC),
 	CCU_DIV_VAR_INFO(CCU_SYS_TIMER2_CLK, "sys_timer2_clk",
 			 "ref_clk", CCU_SYS_TIMER2_BASE, 17,
-			 CLK_SET_RATE_GATE, 0),
+			 CLK_SET_RATE_GATE, CCU_DIV_BASIC),
 	CCU_DIV_VAR_INFO(CCU_SYS_WDT_CLK, "sys_wdt_clk",
 			 "eth_clk", CCU_SYS_WDT_BASE, 17,
 			 CLK_SET_RATE_GATE, CCU_DIV_SKIP_ONE_TO_THREE)
 };
 
-static const struct ccu_div_rst_map sys_rst_map[] = {
-	CCU_DIV_RST_MAP(CCU_SYS_SATA_REF_RST, CCU_SYS_SATA_REF_CLK),
-	CCU_DIV_RST_MAP(CCU_SYS_APB_RST, CCU_SYS_APB_CLK),
-};
+static struct ccu_div_data *axi_data;
+static struct ccu_div_data *sys_data;
+
+static void ccu_div_set_data(struct ccu_div_data *data)
+{
+	struct device_node *np = data->np;
+
+	if (of_device_is_compatible(np, "baikal,bt1-ccu-axi"))
+		axi_data = data;
+	else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys"))
+		sys_data = data;
+	else
+		pr_err("Invalid DT node '%s' specified\n", of_node_full_name(np));
+}
+
+static struct ccu_div_data *ccu_div_get_data(struct device_node *np)
+{
+	if (of_device_is_compatible(np, "baikal,bt1-ccu-axi"))
+		return axi_data;
+	else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys"))
+		return sys_data;
+
+	pr_err("Invalid DT node '%s' specified\n", of_node_full_name(np));
+
+	return NULL;
+}
 
 static struct ccu_div *ccu_div_find_desc(struct ccu_div_data *data,
 					 unsigned int clk_id)
 {
-	struct ccu_div *div;
 	int idx;
 
 	for (idx = 0; idx < data->divs_num; ++idx) {
-		div = data->divs[idx];
-		if (div && div->id == clk_id)
-			return div;
+		if (data->divs_info[idx].id == clk_id)
+			return data->divs[idx];
 	}
 
 	return ERR_PTR(-EINVAL);
 }
 
-static int ccu_div_reset(struct reset_controller_dev *rcdev,
-			 unsigned long rst_id)
-{
-	struct ccu_div_data *data = to_ccu_div_data(rcdev);
-	const struct ccu_div_rst_map *map;
-	struct ccu_div *div;
-	int idx, ret;
-
-	for (idx = 0, map = data->rst_map; idx < data->rst_num; ++idx, ++map) {
-		if (map->rst_id == rst_id)
-			break;
-	}
-	if (idx == data->rst_num) {
-		pr_err("Invalid reset ID %lu specified\n", rst_id);
-		return -EINVAL;
-	}
-
-	div = ccu_div_find_desc(data, map->clk_id);
-	if (IS_ERR(div)) {
-		pr_err("Invalid clock ID %d in mapping\n", map->clk_id);
-		return PTR_ERR(div);
-	}
-
-	ret = ccu_div_reset_domain(div);
-	if (ret) {
-		pr_err("Reset isn't supported by divider %s\n",
-			clk_hw_get_name(ccu_div_get_clk_hw(div)));
-	}
-
-	return ret;
-}
-
-static const struct reset_control_ops ccu_div_rst_ops = {
-	.reset = ccu_div_reset,
-};
-
 static struct ccu_div_data *ccu_div_create_data(struct device_node *np)
 {
 	struct ccu_div_data *data;
@@ -308,13 +280,9 @@ static struct ccu_div_data *ccu_div_create_data(struct device_node *np)
 	if (of_device_is_compatible(np, "baikal,bt1-ccu-axi")) {
 		data->divs_num = ARRAY_SIZE(axi_info);
 		data->divs_info = axi_info;
-		data->rst_num = ARRAY_SIZE(axi_rst_map);
-		data->rst_map = axi_rst_map;
 	} else if (of_device_is_compatible(np, "baikal,bt1-ccu-sys")) {
 		data->divs_num = ARRAY_SIZE(sys_info);
 		data->divs_info = sys_info;
-		data->rst_num = ARRAY_SIZE(sys_rst_map);
-		data->rst_map = sys_rst_map;
 	} else {
 		pr_err("Incompatible DT node '%s' specified\n",
 			of_node_full_name(np));
@@ -365,14 +333,16 @@ static struct clk_hw *ccu_div_of_clk_hw_get(struct of_phandle_args *clkspec,
 	clk_id = clkspec->args[0];
 	div = ccu_div_find_desc(data, clk_id);
 	if (IS_ERR(div)) {
-		pr_info("Invalid clock ID %d specified\n", clk_id);
+		if (div != ERR_PTR(-EPROBE_DEFER))
+			pr_info("Invalid clock ID %d specified\n", clk_id);
+
 		return ERR_CAST(div);
 	}
 
 	return ccu_div_get_clk_hw(div);
 }
 
-static int ccu_div_clk_register(struct ccu_div_data *data)
+static int ccu_div_clk_register(struct ccu_div_data *data, bool defer)
 {
 	int idx, ret;
 
@@ -380,6 +350,13 @@ static int ccu_div_clk_register(struct ccu_div_data *data)
 		const struct ccu_div_info *info = &data->divs_info[idx];
 		struct ccu_div_init_data init = {0};
 
+		if (!!(info->features & CCU_DIV_BASIC) ^ defer) {
+			if (!data->divs[idx])
+				data->divs[idx] = ERR_PTR(-EPROBE_DEFER);
+
+			continue;
+		}
+
 		init.id = info->id;
 		init.name = info->name;
 		init.parent_name = info->parent_name;
@@ -396,6 +373,9 @@ static int ccu_div_clk_register(struct ccu_div_data *data)
 			init.base = info->base;
 			init.sys_regs = data->sys_regs;
 			init.divider = info->divider;
+		} else if (init.type == CCU_DIV_BUF) {
+			init.base = info->base;
+			init.sys_regs = data->sys_regs;
 		} else {
 			init.divider = info->divider;
 		}
@@ -409,49 +389,104 @@ static int ccu_div_clk_register(struct ccu_div_data *data)
 		}
 	}
 
-	ret = of_clk_add_hw_provider(data->np, ccu_div_of_clk_hw_get, data);
-	if (ret) {
-		pr_err("Couldn't register dividers '%s' clock provider\n",
-			of_node_full_name(data->np));
-		goto err_hw_unregister;
-	}
-
 	return 0;
 
 err_hw_unregister:
-	for (--idx; idx >= 0; --idx)
+	for (--idx; idx >= 0; --idx) {
+		if (!!(data->divs_info[idx].features & CCU_DIV_BASIC) ^ defer)
+			continue;
+
 		ccu_div_hw_unregister(data->divs[idx]);
+	}
 
 	return ret;
 }
 
-static void ccu_div_clk_unregister(struct ccu_div_data *data)
+static void ccu_div_clk_unregister(struct ccu_div_data *data, bool defer)
 {
 	int idx;
 
-	of_clk_del_provider(data->np);
+	/* Uninstall only the clocks registered on the specfied stage */
+	for (idx = 0; idx < data->divs_num; ++idx) {
+		if (!!(data->divs_info[idx].features & CCU_DIV_BASIC) ^ defer)
+			continue;
 
-	for (idx = 0; idx < data->divs_num; ++idx)
 		ccu_div_hw_unregister(data->divs[idx]);
+	}
+}
+
+static int ccu_div_of_register(struct ccu_div_data *data)
+{
+	int ret;
+
+	ret = of_clk_add_hw_provider(data->np, ccu_div_of_clk_hw_get, data);
+	if (ret) {
+		pr_err("Couldn't register dividers '%s' clock provider\n",
+		       of_node_full_name(data->np));
+	}
+
+	return ret;
 }
 
 static int ccu_div_rst_register(struct ccu_div_data *data)
 {
-	int ret;
+	struct ccu_rst_init_data init = {0};
 
-	data->rcdev.ops = &ccu_div_rst_ops;
-	data->rcdev.of_node = data->np;
-	data->rcdev.nr_resets = data->rst_num;
+	init.sys_regs = data->sys_regs;
+	init.np = data->np;
 
-	ret = reset_controller_register(&data->rcdev);
-	if (ret)
+	data->rsts = ccu_rst_hw_register(&init);
+	if (IS_ERR(data->rsts)) {
 		pr_err("Couldn't register divider '%s' reset controller\n",
 			of_node_full_name(data->np));
+		return PTR_ERR(data->rsts);
+	}
+
+	return 0;
+}
+
+static int ccu_div_probe(struct platform_device *pdev)
+{
+	struct ccu_div_data *data;
+	int ret;
+
+	data = ccu_div_get_data(dev_of_node(&pdev->dev));
+	if (!data)
+		return -EINVAL;
+
+	ret = ccu_div_clk_register(data, false);
+	if (ret)
+		return ret;
+
+	ret = ccu_div_rst_register(data);
+	if (ret)
+		goto err_clk_unregister;
+
+	return 0;
+
+err_clk_unregister:
+	ccu_div_clk_unregister(data, false);
 
 	return ret;
 }
 
-static void ccu_div_init(struct device_node *np)
+static const struct of_device_id ccu_div_of_match[] = {
+	{ .compatible = "baikal,bt1-ccu-axi" },
+	{ .compatible = "baikal,bt1-ccu-sys" },
+	{ }
+};
+
+static struct platform_driver ccu_div_driver = {
+	.probe  = ccu_div_probe,
+	.driver = {
+		.name = "clk-ccu-div",
+		.of_match_table = ccu_div_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(ccu_div_driver);
+
+static __init void ccu_div_init(struct device_node *np)
 {
 	struct ccu_div_data *data;
 	int ret;
@@ -464,22 +499,23 @@ static void ccu_div_init(struct device_node *np)
 	if (ret)
 		goto err_free_data;
 
-	ret = ccu_div_clk_register(data);
+	ret = ccu_div_clk_register(data, true);
 	if (ret)
 		goto err_free_data;
 
-	ret = ccu_div_rst_register(data);
+	ret = ccu_div_of_register(data);
 	if (ret)
 		goto err_clk_unregister;
 
+	ccu_div_set_data(data);
+
 	return;
 
 err_clk_unregister:
-	ccu_div_clk_unregister(data);
+	ccu_div_clk_unregister(data, true);
 
 err_free_data:
 	ccu_div_free_data(data);
 }
-
-CLK_OF_DECLARE(ccu_axi, "baikal,bt1-ccu-axi", ccu_div_init);
-CLK_OF_DECLARE(ccu_sys, "baikal,bt1-ccu-sys", ccu_div_init);
+CLK_OF_DECLARE_DRIVER(ccu_axi, "baikal,bt1-ccu-axi", ccu_div_init);
+CLK_OF_DECLARE_DRIVER(ccu_sys, "baikal,bt1-ccu-sys", ccu_div_init);

drivers/clk/baikal-t1/clk-ccu-pll.c

@@ -12,6 +12,7 @@
 #define pr_fmt(fmt) "bt1-ccu-pll: " fmt
 
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 #include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
@@ -31,13 +32,14 @@
 #define CCU_PCIE_PLL_BASE		0x018
 #define CCU_ETH_PLL_BASE		0x020
 
-#define CCU_PLL_INFO(_id, _name, _pname, _base, _flags)	\
-	{						\
-		.id = _id,				\
-		.name = _name,				\
-		.parent_name = _pname,			\
-		.base = _base,				\
-		.flags = _flags				\
+#define CCU_PLL_INFO(_id, _name, _pname, _base, _flags, _features)	\
+	{								\
+		.id = _id,						\
+		.name = _name,						\
+		.parent_name = _pname,					\
+		.base = _base,						\
+		.flags = _flags,					\
+		.features = _features,					\
 	}
 
 #define CCU_PLL_NUM			ARRAY_SIZE(pll_info)
@@ -48,6 +50,7 @@ struct ccu_pll_info {
 	const char *parent_name;
 	unsigned int base;
 	unsigned long flags;
+	unsigned long features;
 };
 
 /*
@@ -61,15 +64,15 @@ struct ccu_pll_info {
  */
 static const struct ccu_pll_info pll_info[] = {
 	CCU_PLL_INFO(CCU_CPU_PLL, "cpu_pll", "ref_clk", CCU_CPU_PLL_BASE,
-		     CLK_IS_CRITICAL),
+		     CLK_IS_CRITICAL, CCU_PLL_BASIC),
 	CCU_PLL_INFO(CCU_SATA_PLL, "sata_pll", "ref_clk", CCU_SATA_PLL_BASE,
-		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE),
+		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0),
 	CCU_PLL_INFO(CCU_DDR_PLL, "ddr_pll", "ref_clk", CCU_DDR_PLL_BASE,
-		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE),
+		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0),
 	CCU_PLL_INFO(CCU_PCIE_PLL, "pcie_pll", "ref_clk", CCU_PCIE_PLL_BASE,
-		     CLK_IS_CRITICAL),
+		     CLK_IS_CRITICAL, CCU_PLL_BASIC),
 	CCU_PLL_INFO(CCU_ETH_PLL, "eth_pll", "ref_clk", CCU_ETH_PLL_BASE,
-		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE)
+		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0)
 };
 
 struct ccu_pll_data {
@@ -78,16 +81,16 @@ struct ccu_pll_data {
 	struct ccu_pll *plls[CCU_PLL_NUM];
 };
 
+static struct ccu_pll_data *pll_data;
+
 static struct ccu_pll *ccu_pll_find_desc(struct ccu_pll_data *data,
 					 unsigned int clk_id)
 {
-	struct ccu_pll *pll;
 	int idx;
 
 	for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
-		pll = data->plls[idx];
-		if (pll && pll->id == clk_id)
-			return pll;
+		if (pll_info[idx].id == clk_id)
+			return data->plls[idx];
 	}
 
 	return ERR_PTR(-EINVAL);
@@ -133,14 +136,16 @@ static struct clk_hw *ccu_pll_of_clk_hw_get(struct of_phandle_args *clkspec,
 	clk_id = clkspec->args[0];
 	pll = ccu_pll_find_desc(data, clk_id);
 	if (IS_ERR(pll)) {
-		pr_info("Invalid PLL clock ID %d specified\n", clk_id);
+		if (pll != ERR_PTR(-EPROBE_DEFER))
+			pr_info("Invalid PLL clock ID %d specified\n", clk_id);
+
 		return ERR_CAST(pll);
 	}
 
 	return ccu_pll_get_clk_hw(pll);
 }
 
-static int ccu_pll_clk_register(struct ccu_pll_data *data)
+static int ccu_pll_clk_register(struct ccu_pll_data *data, bool defer)
 {
 	int idx, ret;
 
@@ -148,6 +153,14 @@ static int ccu_pll_clk_register(struct ccu_pll_data *data)
 		const struct ccu_pll_info *info = &pll_info[idx];
 		struct ccu_pll_init_data init = {0};
 
+		/* Defer non-basic PLLs allocation for the probe stage */
+		if (!!(info->features & CCU_PLL_BASIC) ^ defer) {
+			if (!data->plls[idx])
+				data->plls[idx] = ERR_PTR(-EPROBE_DEFER);
+
+			continue;
+		}
+
 		init.id = info->id;
 		init.name = info->name;
 		init.parent_name = info->parent_name;
@@ -155,6 +168,7 @@ static int ccu_pll_clk_register(struct ccu_pll_data *data)
 		init.sys_regs = data->sys_regs;
 		init.np = data->np;
 		init.flags = info->flags;
+		init.features = info->features;
 
 		data->plls[idx] = ccu_pll_hw_register(&init);
 		if (IS_ERR(data->plls[idx])) {
@@ -165,22 +179,70 @@ static int ccu_pll_clk_register(struct ccu_pll_data *data)
 		}
 	}
 
+	return 0;
+
+err_hw_unregister:
+	for (--idx; idx >= 0; --idx) {
+		if (!!(pll_info[idx].features & CCU_PLL_BASIC) ^ defer)
+			continue;
+
+		ccu_pll_hw_unregister(data->plls[idx]);
+	}
+
+	return ret;
+}
+
+static void ccu_pll_clk_unregister(struct ccu_pll_data *data, bool defer)
+{
+	int idx;
+
+	/* Uninstall only the clocks registered on the specfied stage */
+	for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
+		if (!!(pll_info[idx].features & CCU_PLL_BASIC) ^ defer)
+			continue;
+
+		ccu_pll_hw_unregister(data->plls[idx]);
+	}
+}
+
+static int ccu_pll_of_register(struct ccu_pll_data *data)
+{
+	int ret;
+
 	ret = of_clk_add_hw_provider(data->np, ccu_pll_of_clk_hw_get, data);
 	if (ret) {
 		pr_err("Couldn't register PLL provider of '%s'\n",
 			of_node_full_name(data->np));
-		goto err_hw_unregister;
 	}
 
-	return 0;
-
-err_hw_unregister:
-	for (--idx; idx >= 0; --idx)
-		ccu_pll_hw_unregister(data->plls[idx]);
-
 	return ret;
 }
 
+static int ccu_pll_probe(struct platform_device *pdev)
+{
+	struct ccu_pll_data *data = pll_data;
+
+	if (!data)
+		return -EINVAL;
+
+	return ccu_pll_clk_register(data, false);
+}
+
+static const struct of_device_id ccu_pll_of_match[] = {
+	{ .compatible = "baikal,bt1-ccu-pll" },
+	{ }
+};
+
+static struct platform_driver ccu_pll_driver = {
+	.probe  = ccu_pll_probe,
+	.driver = {
+		.name = "clk-ccu-pll",
+		.of_match_table = ccu_pll_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(ccu_pll_driver);
+
 static __init void ccu_pll_init(struct device_node *np)
 {
 	struct ccu_pll_data *data;
@@ -194,13 +256,22 @@ static __init void ccu_pll_init(struct device_node *np)
 	if (ret)
 		goto err_free_data;
 
-	ret = ccu_pll_clk_register(data);
+	ret = ccu_pll_clk_register(data, true);
 	if (ret)
 		goto err_free_data;
 
+	ret = ccu_pll_of_register(data);
+	if (ret)
+		goto err_clk_unregister;
+
+	pll_data = data;
+
 	return;
 
+err_clk_unregister:
+	ccu_pll_clk_unregister(data, true);
+
 err_free_data:
 	ccu_pll_free_data(data);
 }
-CLK_OF_DECLARE(ccu_pll, "baikal,bt1-ccu-pll", ccu_pll_init);
+CLK_OF_DECLARE_DRIVER(ccu_pll, "baikal,bt1-ccu-pll", ccu_pll_init);

drivers/clk/bcm/clk-bcm2835.c

@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/math.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -502,6 +503,8 @@ struct bcm2835_clock_data {
 	bool low_jitter;
 
 	u32 tcnt_mux;
+
+	bool round_up;
 };
 
 struct bcm2835_gate_data {
@@ -966,9 +969,9 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
 	return div;
 }
 
-static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
-					    unsigned long parent_rate,
-					    u32 div)
+static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+						     unsigned long parent_rate,
+						     u32 div)
 {
 	const struct bcm2835_clock_data *data = clock->data;
 	u64 temp;
@@ -993,12 +996,34 @@ static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
 	return temp;
 }
 
+static unsigned long bcm2835_round_rate(unsigned long rate)
+{
+	unsigned long scaler;
+	unsigned long limit;
+
+	limit = rate / 100000;
+
+	scaler = 1;
+	while (scaler < limit)
+		scaler *= 10;
+
+	/*
+	 * If increasing a clock by less than 0.1% changes it
+	 * from ..999.. to ..000.., round up.
+	 */
+	if ((rate + scaler - 1) / scaler % 1000 == 0)
+		rate = roundup(rate, scaler);
+
+	return rate;
+}
+
 static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
 					    unsigned long parent_rate)
 {
 	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
 	struct bcm2835_cprman *cprman = clock->cprman;
 	const struct bcm2835_clock_data *data = clock->data;
+	unsigned long rate;
 	u32 div;
 
 	if (data->int_bits == 0 && data->frac_bits == 0)
@@ -1006,7 +1031,12 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
 
 	div = cprman_read(cprman, data->div_reg);
 
-	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+	rate = bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+
+	if (data->round_up)
+		rate = bcm2835_round_rate(rate);
+
+	return rate;
 }
 
 static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
@@ -1784,7 +1814,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.load_mask = CM_PLLC_LOADPER,
 		.hold_mask = CM_PLLC_HOLDPER,
 		.fixed_divider = 1,
-		.flags = CLK_SET_RATE_PARENT),
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
 
 	/*
 	 * PLLD is the display PLL, used to drive DSI display panels.
@@ -2143,7 +2173,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
 		.div_reg = CM_UARTDIV,
 		.int_bits = 10,
 		.frac_bits = 12,
-		.tcnt_mux = 28),
+		.tcnt_mux = 28,
+		.round_up = true),
 
 	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
 	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(

drivers/clk/bcm/clk-raspberrypi.c

@@ -33,6 +33,7 @@ enum rpi_firmware_clk_id {
 	RPI_FIRMWARE_EMMC2_CLK_ID,
 	RPI_FIRMWARE_M2MC_CLK_ID,
 	RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+	RPI_FIRMWARE_VEC_CLK_ID,
 	RPI_FIRMWARE_NUM_CLK_ID,
 };
 
@@ -51,6 +52,7 @@ static char *rpi_firmware_clk_names[] = {
 	[RPI_FIRMWARE_EMMC2_CLK_ID]	= "emmc2",
 	[RPI_FIRMWARE_M2MC_CLK_ID]	= "m2mc",
 	[RPI_FIRMWARE_PIXEL_BVB_CLK_ID]	= "pixel-bvb",
+	[RPI_FIRMWARE_VEC_CLK_ID]	= "vec",
 };
 
 #define RPI_FIRMWARE_STATE_ENABLE_BIT	BIT(0)
@@ -129,9 +131,18 @@ raspberrypi_clk_variants[RPI_FIRMWARE_NUM_CLK_ID] = {
 	[RPI_FIRMWARE_V3D_CLK_ID] = {
 		.export = true,
 	},
+	[RPI_FIRMWARE_PIXEL_CLK_ID] = {
+		.export = true,
+	},
+	[RPI_FIRMWARE_HEVC_CLK_ID] = {
+		.export = true,
+	},
 	[RPI_FIRMWARE_PIXEL_BVB_CLK_ID] = {
 		.export = true,
 	},
+	[RPI_FIRMWARE_VEC_CLK_ID] = {
+		.export = true,
+	},
 };
 
 /*

drivers/clk/berlin/bg2.c

@@ -500,12 +500,15 @@ static void __init berlin2_clock_setup(struct device_node *np)
 	int n, ret;
 
 	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
-	if (!clk_data)
+	if (!clk_data) {
+		of_node_put(parent_np);
 		return;
+	}
 	clk_data->num = MAX_CLKS;
 	hws = clk_data->hws;
 
 	gbase = of_iomap(parent_np, 0);
+	of_node_put(parent_np);
 	if (!gbase)
 		return;
 

drivers/clk/berlin/bg2q.c

@@ -286,19 +286,23 @@ static void __init berlin2q_clock_setup(struct device_node *np)
 	int n, ret;
 
 	clk_data = kzalloc(struct_size(clk_data, hws, MAX_CLKS), GFP_KERNEL);
-	if (!clk_data)
+	if (!clk_data) {
+		of_node_put(parent_np);
 		return;
+	}
 	clk_data->num = MAX_CLKS;
 	hws = clk_data->hws;
 
 	gbase = of_iomap(parent_np, 0);
 	if (!gbase) {
+		of_node_put(parent_np);
 		pr_err("%pOF: Unable to map global base\n", np);
 		return;
 	}
 
 	/* BG2Q CPU PLL is not part of global registers */
 	cpupll_base = of_iomap(parent_np, 1);
+	of_node_put(parent_np);
 	if (!cpupll_base) {
 		pr_err("%pOF: Unable to map cpupll base\n", np);
 		iounmap(gbase);

drivers/clk/clk-asm9260.c

@@ -80,7 +80,7 @@ struct asm9260_mux_clock {
 	u8			mask;
 	u32			*table;
 	const char		*name;
-	const char		**parent_names;
+	const struct clk_parent_data *parent_data;
 	u8			num_parents;
 	unsigned long		offset;
 	unsigned long		flags;
@@ -232,10 +232,10 @@ static const struct asm9260_gate_data asm9260_ahb_gates[] __initconst = {
 		HW_AHBCLKCTRL1,	16 },
 };
 
-static const char __initdata *main_mux_p[] =   { NULL, NULL };
-static const char __initdata *i2s0_mux_p[] =   { NULL, NULL, "i2s0m_div"};
-static const char __initdata *i2s1_mux_p[] =   { NULL, NULL, "i2s1m_div"};
-static const char __initdata *clkout_mux_p[] = { NULL, NULL, "rtc"};
+static struct clk_parent_data __initdata main_mux_p[] =   { { .index = 0, }, { .name = "pll" } };
+static struct clk_parent_data __initdata i2s0_mux_p[] =   { { .index = 0, }, { .name = "pll" }, { .name = "i2s0m_div"} };
+static struct clk_parent_data __initdata i2s1_mux_p[] =   { { .index = 0, }, { .name = "pll" }, { .name = "i2s1m_div"} };
+static struct clk_parent_data __initdata clkout_mux_p[] = { { .index = 0, }, { .name = "pll" }, { .name = "rtc"} };
 static u32 three_mux_table[] = {0, 1, 3};
 
 static struct asm9260_mux_clock asm9260_mux_clks[] __initdata = {
@@ -255,9 +255,10 @@ static struct asm9260_mux_clock asm9260_mux_clks[] __initdata = {
 
 static void __init asm9260_acc_init(struct device_node *np)
 {
-	struct clk_hw *hw;
+	struct clk_hw *hw, *pll_hw;
 	struct clk_hw **hws;
-	const char *ref_clk, *pll_clk = "pll";
+	const char *pll_clk = "pll";
+	struct clk_parent_data pll_parent_data = { .index = 0 };
 	u32 rate;
 	int n;
 
@@ -274,21 +275,15 @@ static void __init asm9260_acc_init(struct device_node *np)
 	/* register pll */
 	rate = (ioread32(base + HW_SYSPLLCTRL) & 0xffff) * 1000000;
 
-	/* TODO: Convert to DT parent scheme */
-	ref_clk = of_clk_get_parent_name(np, 0);
-	hw = __clk_hw_register_fixed_rate(NULL, NULL, pll_clk,
-			ref_clk, NULL, NULL, 0, rate, 0,
-			CLK_FIXED_RATE_PARENT_ACCURACY);
-
-	if (IS_ERR(hw))
+	pll_hw = clk_hw_register_fixed_rate_parent_accuracy(NULL, pll_clk, &pll_parent_data,
+							0, rate);
+	if (IS_ERR(pll_hw))
 		panic("%pOFn: can't register REFCLK. Check DT!", np);
 
 	for (n = 0; n < ARRAY_SIZE(asm9260_mux_clks); n++) {
 		const struct asm9260_mux_clock *mc = &asm9260_mux_clks[n];
 
-		mc->parent_names[0] = ref_clk;
-		mc->parent_names[1] = pll_clk;
-		hw = clk_hw_register_mux_table(NULL, mc->name, mc->parent_names,
+		hw = clk_hw_register_mux_table_parent_data(NULL, mc->name, mc->parent_data,
 				mc->num_parents, mc->flags, base + mc->offset,
 				0, mc->mask, 0, mc->table, &asm9260_clk_lock);
 	}

drivers/clk/clk-ast2600.c

@@ -622,7 +622,7 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
 	regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */
 
 	/* P-Bus (BCLK) clock divider */
-	hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
+	hw = clk_hw_register_divider_table(dev, "bclk", "epll", 0,
 			scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
 			ast2600_div_table,
 			&aspeed_g6_clk_lock);

drivers/clk/clk-fixed-rate.c

@@ -49,12 +49,24 @@ const struct clk_ops clk_fixed_rate_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_fixed_rate_ops);
 
+static void devm_clk_hw_register_fixed_rate_release(struct device *dev, void *res)
+{
+	struct clk_fixed_rate *fix = res;
+
+	/*
+	 * We can not use clk_hw_unregister_fixed_rate, since it will kfree()
+	 * the hw, resulting in double free. Just unregister the hw and let
+	 * devres code kfree() it.
+	 */
+	clk_hw_unregister(&fix->hw);
+}
+
 struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev,
 		struct device_node *np, const char *name,
 		const char *parent_name, const struct clk_hw *parent_hw,
 		const struct clk_parent_data *parent_data, unsigned long flags,
 		unsigned long fixed_rate, unsigned long fixed_accuracy,
-		unsigned long clk_fixed_flags)
+		unsigned long clk_fixed_flags, bool devm)
 {
 	struct clk_fixed_rate *fixed;
 	struct clk_hw *hw;
@@ -62,7 +74,11 @@ struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev,
 	int ret = -EINVAL;
 
 	/* allocate fixed-rate clock */
-	fixed = kzalloc(sizeof(*fixed), GFP_KERNEL);
+	if (devm)
+		fixed = devres_alloc(devm_clk_hw_register_fixed_rate_release,
+				     sizeof(*fixed), GFP_KERNEL);
+	else
+		fixed = kzalloc(sizeof(*fixed), GFP_KERNEL);
 	if (!fixed)
 		return ERR_PTR(-ENOMEM);
 
@@ -90,9 +106,13 @@ struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev,
 	else
 		ret = of_clk_hw_register(np, hw);
 	if (ret) {
-		kfree(fixed);
+		if (devm)
+			devres_free(fixed);
+		else
+			kfree(fixed);
 		hw = ERR_PTR(ret);
-	}
+	} else if (devm)
+		devres_add(dev, fixed);
 
 	return hw;
 }

drivers/clk/clk-lan966x.c

@@ -286,7 +286,7 @@ static struct platform_driver lan966x_clk_driver = {
 		.of_match_table = lan966x_clk_dt_ids,
 	},
 };
-builtin_platform_driver(lan966x_clk_driver);
+module_platform_driver(lan966x_clk_driver);
 
 MODULE_AUTHOR("Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>");
 MODULE_DESCRIPTION("LAN966X clock driver");

drivers/clk/clk-lochnagar.c

@@ -19,7 +19,7 @@
 #include <linux/mfd/lochnagar1_regs.h>
 #include <linux/mfd/lochnagar2_regs.h>
 
-#include <dt-bindings/clk/lochnagar.h>
+#include <dt-bindings/clock/lochnagar.h>
 
 #define LOCHNAGAR_NUM_CLOCKS	(LOCHNAGAR_SPDIF_CLKOUT + 1)
 

drivers/clk/clk-nomadik.c

@@ -99,7 +99,7 @@ static void __init nomadik_src_init(void)
 	if (!src_base) {
 		pr_err("%s: must have src parent node with REGS (%pOFn)\n",
 		       __func__, np);
-		return;
+		goto out_put;
 	}
 
 	/* Set all timers to use the 2.4 MHz TIMCLK */
@@ -132,6 +132,9 @@ static void __init nomadik_src_init(void)
 	}
 	writel(val, src_base + SRC_XTALCR);
 	register_reboot_notifier(&nomadik_clk_reboot_notifier);
+
+out_put:
+	of_node_put(np);
 }
 
 /**

drivers/clk/clk-npcm7xx.c

@@ -129,20 +129,6 @@ npcm7xx_clk_register_pll(void __iomem *pllcon, const char *name,
 #define NPCM7XX_SECCNT          (0x68)
 #define NPCM7XX_CNTR25M         (0x6C)
 
-struct npcm7xx_clk_gate_data {
-	u32 reg;
-	u8 bit_idx;
-	const char *name;
-	const char *parent_name;
-	unsigned long flags;
-	/*
-	 * If this clock is exported via DT, set onecell_idx to constant
-	 * defined in include/dt-bindings/clock/nuvoton, NPCM7XX-clock.h for
-	 * this specific clock.  Otherwise, set to -1.
-	 */
-	int onecell_idx;
-};
-
 struct npcm7xx_clk_mux_data {
 	u8 shift;
 	u8 mask;
@@ -160,21 +146,6 @@ struct npcm7xx_clk_mux_data {
 
 };
 
-struct npcm7xx_clk_div_fixed_data {
-	u8 mult;
-	u8 div;
-	const char *name;
-	const char *parent_name;
-	u8 clk_divider_flags;
-	/*
-	 * If this clock is exported via DT, set onecell_idx to constant
-	 * defined in include/dt-bindings/clock/nuvoton, NPCM7XX-clock.h for
-	 * this specific clock.  Otherwise, set to -1.
-	 */
-	int onecell_idx;
-};
-
-
 struct npcm7xx_clk_div_data {
 	u32 reg;
 	u8 shift;

drivers/clk/clk-oxnas.c

@@ -207,7 +207,7 @@ static const struct of_device_id oxnas_stdclk_dt_ids[] = {
 
 static int oxnas_stdclk_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.of_node, *parent_np;
 	const struct oxnas_stdclk_data *data;
 	struct regmap *regmap;
 	int ret;
@@ -215,7 +215,9 @@ static int oxnas_stdclk_probe(struct platform_device *pdev)
 
 	data = of_device_get_match_data(&pdev->dev);
 
-	regmap = syscon_node_to_regmap(of_get_parent(np));
+	parent_np = of_get_parent(np);
+	regmap = syscon_node_to_regmap(parent_np);
+	of_node_put(parent_np);
 	if (IS_ERR(regmap)) {
 		dev_err(&pdev->dev, "failed to have parent regmap\n");
 		return PTR_ERR(regmap);

drivers/clk/clk-qoriq.c

@@ -1063,8 +1063,13 @@ static void __init _clockgen_init(struct device_node *np, bool legacy);
  */
 static void __init legacy_init_clockgen(struct device_node *np)
 {
-	if (!clockgen.node)
-		_clockgen_init(of_get_parent(np), true);
+	if (!clockgen.node) {
+		struct device_node *parent_np;
+
+		parent_np = of_get_parent(np);
+		_clockgen_init(parent_np, true);
+		of_node_put(parent_np);
+	}
 }
 
 /* Legacy node */
@@ -1159,6 +1164,7 @@ static struct clk * __init create_sysclk(const char *name)
 	sysclk = of_get_child_by_name(clockgen.node, "sysclk");
 	if (sysclk) {
 		clk = sysclk_from_fixed(sysclk, name);
+		of_node_put(sysclk);
 		if (!IS_ERR(clk))
 			return clk;
 	}

drivers/clk/clk-versaclock5.c

@@ -24,7 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
-#include <dt-bindings/clk/versaclock.h>
+#include <dt-bindings/clock/versaclock.h>
 
 /* VersaClock5 registers */
 #define VC5_OTP_CONTROL				0x00
@@ -153,6 +153,7 @@ enum vc5_model {
 	IDT_VC5_5P49V5935,
 	IDT_VC6_5P49V6901,
 	IDT_VC6_5P49V6965,
+	IDT_VC6_5P49V6975,
 };
 
 /* Structure to describe features of a particular VC5 model */
@@ -230,8 +231,12 @@ static unsigned char vc5_mux_get_parent(struct clk_hw *hw)
 		container_of(hw, struct vc5_driver_data, clk_mux);
 	const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
 	unsigned int src;
+	int ret;
+
+	ret = regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src);
+	if (ret)
+		return 0;
 
-	regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src);
 	src &= mask;
 
 	if (src == VC5_PRIM_SRC_SHDN_EN_XTAL)
@@ -286,8 +291,12 @@ static unsigned long vc5_dbl_recalc_rate(struct clk_hw *hw,
 	struct vc5_driver_data *vc5 =
 		container_of(hw, struct vc5_driver_data, clk_mul);
 	unsigned int premul;
+	int ret;
+
+	ret = regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &premul);
+	if (ret)
+		return 0;
 
-	regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &premul);
 	if (premul & VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ)
 		parent_rate *= 2;
 
@@ -315,11 +324,9 @@ static int vc5_dbl_set_rate(struct clk_hw *hw, unsigned long rate,
 	else
 		mask = 0;
 
-	regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN,
-			   VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ,
-			   mask);
-
-	return 0;
+	return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN,
+				  VC5_PRIM_SRC_SHDN_EN_DOUBLE_XTAL_FREQ,
+				  mask);
 }
 
 static const struct clk_ops vc5_dbl_ops = {
@@ -334,14 +341,19 @@ static unsigned long vc5_pfd_recalc_rate(struct clk_hw *hw,
 	struct vc5_driver_data *vc5 =
 		container_of(hw, struct vc5_driver_data, clk_pfd);
 	unsigned int prediv, div;
+	int ret;
 
-	regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
+	ret = regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
+	if (ret)
+		return 0;
 
 	/* The bypass_prediv is set, PLL fed from Ref_in directly. */
 	if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
 		return parent_rate;
 
-	regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div);
+	ret = regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div);
+	if (ret)
+		return 0;
 
 	/* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
 	if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
@@ -376,15 +388,17 @@ static int vc5_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct vc5_driver_data *vc5 =
 		container_of(hw, struct vc5_driver_data, clk_pfd);
 	unsigned long idiv;
+	int ret;
 	u8 div;
 
 	/* CLKIN within range of PLL input, feed directly to PLL. */
 	if (parent_rate <= 50000000) {
-		regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
-				   VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV,
-				   VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
-		regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00);
-		return 0;
+		ret = regmap_set_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
+				      VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
+		if (ret)
+			return ret;
+
+		return regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00);
 	}
 
 	idiv = DIV_ROUND_UP(parent_rate, rate);
@@ -395,11 +409,12 @@ static int vc5_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
 	else
 		div = VC5_REF_DIVIDER_REF_DIV(idiv);
 
-	regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div);
-	regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
-			   VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0);
+	ret = regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div);
+	if (ret)
+		return ret;
 
-	return 0;
+	return regmap_clear_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
+				 VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
 }
 
 static const struct clk_ops vc5_pfd_ops = {
@@ -551,9 +566,12 @@ static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate,
 		hwdata->div_int >> 4, hwdata->div_int << 4,
 		0
 	};
+	int ret;
 
-	regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
-			  data, 14);
+	ret = regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
+				data, 14);
+	if (ret)
+		return ret;
 
 	/*
 	 * Toggle magic bit in undocumented register for unknown reason.
@@ -561,12 +579,13 @@ static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate,
 	 * datasheet somewhat implies this is needed, but the register
 	 * and the bit is not documented.
 	 */
-	regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
-			   VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0);
-	regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
-			   VC5_GLOBAL_REGISTER_GLOBAL_RESET,
-			   VC5_GLOBAL_REGISTER_GLOBAL_RESET);
-	return 0;
+	ret = regmap_clear_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
+				VC5_GLOBAL_REGISTER_GLOBAL_RESET);
+	if (ret)
+		return ret;
+
+	return regmap_set_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
+			       VC5_GLOBAL_REGISTER_GLOBAL_RESET);
 }
 
 static const struct clk_ops vc5_fod_ops = {
@@ -594,10 +613,9 @@ static int vc5_clk_out_prepare(struct clk_hw *hw)
 	 * registers.
 	 */
 	if (vc5->chip_info->flags & VC5_HAS_BYPASS_SYNC_BIT) {
-		ret = regmap_update_bits(vc5->regmap,
-					 VC5_RESERVED_X0(hwdata->num),
-					 VC5_RESERVED_X0_BYPASS_SYNC,
-					 VC5_RESERVED_X0_BYPASS_SYNC);
+		ret = regmap_set_bits(vc5->regmap,
+				      VC5_RESERVED_X0(hwdata->num),
+				      VC5_RESERVED_X0_BYPASS_SYNC);
 		if (ret)
 			return ret;
 	}
@@ -606,7 +624,10 @@ static int vc5_clk_out_prepare(struct clk_hw *hw)
 	 * If the input mux is disabled, enable it first and
 	 * select source from matching FOD.
 	 */
-	regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+	ret = regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+	if (ret)
+		return ret;
+
 	if ((src & mask) == 0) {
 		src = VC5_OUT_DIV_CONTROL_RESET | VC5_OUT_DIV_CONTROL_EN_FOD;
 		ret = regmap_update_bits(vc5->regmap,
@@ -617,18 +638,22 @@ static int vc5_clk_out_prepare(struct clk_hw *hw)
 	}
 
 	/* Enable the clock buffer */
-	regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
-			   VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
-			   VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+	ret = regmap_set_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+			      VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
+	if (ret)
+		return ret;
+
 	if (hwdata->clk_output_cfg0_mask) {
 		dev_dbg(&vc5->client->dev, "Update output %d mask 0x%0X val 0x%0X\n",
 			hwdata->num, hwdata->clk_output_cfg0_mask,
 			hwdata->clk_output_cfg0);
 
-		regmap_update_bits(vc5->regmap,
-			VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
-			hwdata->clk_output_cfg0_mask,
-			hwdata->clk_output_cfg0);
+		ret = regmap_update_bits(vc5->regmap,
+					 VC5_CLK_OUTPUT_CFG(hwdata->num, 0),
+					 hwdata->clk_output_cfg0_mask,
+					 hwdata->clk_output_cfg0);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
@@ -640,8 +665,8 @@ static void vc5_clk_out_unprepare(struct clk_hw *hw)
 	struct vc5_driver_data *vc5 = hwdata->vc5;
 
 	/* Disable the clock buffer */
-	regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
-			   VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
+	regmap_clear_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
+			  VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
 }
 
 static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
@@ -656,8 +681,12 @@ static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
 	const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
 			  VC5_OUT_DIV_CONTROL_SEL_EXT;
 	unsigned int src;
+	int ret;
+
+	ret = regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
+	if (ret)
+		return 0;
 
-	regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
 	src &= mask;
 
 	if (src == 0)	/* Input mux set to DISABLED */
@@ -725,6 +754,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
 	case IDT_VC5_5P49V5935:
 	case IDT_VC6_5P49V6901:
 	case IDT_VC6_5P49V6965:
+	case IDT_VC6_5P49V6975:
 	default:
 		return n;
 	}
@@ -819,22 +849,27 @@ static int vc5_update_cap_load(struct device_node *node, struct vc5_driver_data
 {
 	u32 value;
 	int mapped_value;
+	int ret;
 
-	if (!of_property_read_u32(node, "idt,xtal-load-femtofarads", &value)) {
-		mapped_value = vc5_map_cap_value(value);
-		if (mapped_value < 0)
-			return mapped_value;
+	if (of_property_read_u32(node, "idt,xtal-load-femtofarads", &value))
+		return 0;
 
-		/*
-		 * The mapped_value is really the high 6 bits of
-		 * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so
-		 * shift the value 2 places.
-		 */
-		regmap_update_bits(vc5->regmap, VC5_XTAL_X1_LOAD_CAP, ~0x03, mapped_value << 2);
-		regmap_update_bits(vc5->regmap, VC5_XTAL_X2_LOAD_CAP, ~0x03, mapped_value << 2);
-	}
+	mapped_value = vc5_map_cap_value(value);
+	if (mapped_value < 0)
+		return mapped_value;
 
-	return 0;
+	/*
+	 * The mapped_value is really the high 6 bits of
+	 * VC5_XTAL_X1_LOAD_CAP and VC5_XTAL_X2_LOAD_CAP, so
+	 * shift the value 2 places.
+	 */
+	ret = regmap_update_bits(vc5->regmap, VC5_XTAL_X1_LOAD_CAP, ~0x03,
+				 mapped_value << 2);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(vc5->regmap, VC5_XTAL_X2_LOAD_CAP, ~0x03,
+				  mapped_value << 2);
 }
 
 static int vc5_update_slew(struct device_node *np_output,
@@ -956,7 +991,10 @@ static int vc5_probe(struct i2c_client *client)
 				     "could not read idt,output-enable-active\n");
 	}
 
-	regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, src_mask, src_val);
+	ret = regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, src_mask,
+				 src_val);
+	if (ret)
+		return ret;
 
 	/* Register clock input mux */
 	memset(&init, 0, sizeof(init));
@@ -1202,7 +1240,7 @@ static const struct vc5_chip_info idt_5p49v6901_info = {
 	.model = IDT_VC6_5P49V6901,
 	.clk_fod_cnt = 4,
 	.clk_out_cnt = 5,
-	.flags = VC5_HAS_PFD_FREQ_DBL,
+	.flags = VC5_HAS_PFD_FREQ_DBL | VC5_HAS_BYPASS_SYNC_BIT,
 };
 
 static const struct vc5_chip_info idt_5p49v6965_info = {
@@ -1212,6 +1250,13 @@ static const struct vc5_chip_info idt_5p49v6965_info = {
 	.flags = VC5_HAS_BYPASS_SYNC_BIT,
 };
 
+static const struct vc5_chip_info idt_5p49v6975_info = {
+	.model = IDT_VC6_5P49V6975,
+	.clk_fod_cnt = 4,
+	.clk_out_cnt = 5,
+	.flags = VC5_HAS_BYPASS_SYNC_BIT | VC5_HAS_INTERNAL_XTAL,
+};
+
 static const struct i2c_device_id vc5_id[] = {
 	{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
 	{ "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
@@ -1219,6 +1264,7 @@ static const struct i2c_device_id vc5_id[] = {
 	{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
 	{ "5p49v6901", .driver_data = IDT_VC6_5P49V6901 },
 	{ "5p49v6965", .driver_data = IDT_VC6_5P49V6965 },
+	{ "5p49v6975", .driver_data = IDT_VC6_5P49V6975 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, vc5_id);
@@ -1230,6 +1276,7 @@ static const struct of_device_id clk_vc5_of_match[] = {
 	{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
 	{ .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
 	{ .compatible = "idt,5p49v6965", .data = &idt_5p49v6965_info },
+	{ .compatible = "idt,5p49v6975", .data = &idt_5p49v6975_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, clk_vc5_of_match);

drivers/clk/clk-xgene.c

@@ -522,10 +522,10 @@ static int xgene_clk_is_enabled(struct clk_hw *hw)
 		pr_debug("%s clock is %s\n", clk_hw_get_name(hw),
 			data & pclk->param.reg_clk_mask ? "enabled" :
 							"disabled");
+	} else {
+		return 1;
 	}
 
-	if (!pclk->param.csr_reg)
-		return 1;
 	return data & pclk->param.reg_clk_mask ? 1 : 0;
 }
 

drivers/clk/clk.c

@@ -2267,7 +2267,7 @@ static int clk_core_set_rate_nolock(struct clk_core *core,
 {
 	struct clk_core *top, *fail_clk;
 	unsigned long rate;
-	int ret = 0;
+	int ret;
 
 	if (!core)
 		return 0;
@@ -3522,7 +3522,7 @@ static void clk_core_reparent_orphans_nolock(void)
 
 		/*
 		 * We need to use __clk_set_parent_before() and _after() to
-		 * to properly migrate any prepare/enable count of the orphan
+		 * properly migrate any prepare/enable count of the orphan
 		 * clock. This is important for CLK_IS_CRITICAL clocks, which
 		 * are enabled during init but might not have a parent yet.
 		 */
@@ -3736,7 +3736,6 @@ static int __clk_core_init(struct clk_core *core)
 	clk_core_hold_state(core);
 	clk_core_reparent_orphans_nolock();
 
-
 	kref_init(&core->ref);
 out:
 	clk_pm_runtime_put(core);
@@ -4815,32 +4814,6 @@ void of_clk_del_provider(struct device_node *np)
 }
 EXPORT_SYMBOL_GPL(of_clk_del_provider);
 
-static int devm_clk_provider_match(struct device *dev, void *res, void *data)
-{
-	struct device_node **np = res;
-
-	if (WARN_ON(!np || !*np))
-		return 0;
-
-	return *np == data;
-}
-
-/**
- * devm_of_clk_del_provider() - Remove clock provider registered using devm
- * @dev: Device to whose lifetime the clock provider was bound
- */
-void devm_of_clk_del_provider(struct device *dev)
-{
-	int ret;
-	struct device_node *np = get_clk_provider_node(dev);
-
-	ret = devres_release(dev, devm_of_clk_release_provider,
-			     devm_clk_provider_match, np);
-
-	WARN_ON(ret);
-}
-EXPORT_SYMBOL(devm_of_clk_del_provider);
-
 /**
  * of_parse_clkspec() - Parse a DT clock specifier for a given device node
  * @np: device node to parse clock specifier from