Merge tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
 "The I2C core has two header documentation updates as the dependecies
  are in now.

  The I2C host drivers add some patches which nearly fell through the
  cracks:

   - Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
     Camera Control Interface (CCI).

   - Added support for the "settle-time-us" property, which allows the
     gpio-mux device to switch from one bus to another with a
     configurable delay. The time can be set in the DTS. The latest
     change also includes file sorting.

   - Fixed slot numbering in the SMBus framework to prevent failures
     when more than 8 slots are occupied. It now enforces a a maximum of
     8 slots to be used. This ensures that the Intel PIIX4 device can
     register the SPDs correctly without failure, even if other slots
     are populated but not used"

* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: header: improve kdoc for i2c_algorithm
  i2c: header: remove unneeded stuff regarding i2c_algorithm
  i2c: piix4: Register SPDs
  i2c: smbus: remove i801 assumptions from SPD probing
  i2c: mux: gpio: Add support for the 'settle-time-us' property
  i2c: mux: gpio: Re-order #include to match alphabetic order
  dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
  dt-bindings: i2c: qcom-cci: Document sm8650 compatible
  dt-bindings: i2c: qcom-cci: Document sm8550 compatible

Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml

@@ -57,6 +57,9 @@ properties:
       last value used.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  settle-time-us:
+    description: Delay to wait before doing any transfer when a new bus gets selected.
+
 allOf:
   - $ref: i2c-mux.yaml
 

Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml

@@ -31,6 +31,8 @@ properties:
               - qcom,sm6350-cci
               - qcom,sm8250-cci
               - qcom,sm8450-cci
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
           - const: qcom,msm8996-cci # CCI v2
 
   "#address-cells":
@@ -195,6 +197,24 @@ allOf:
             - const: cpas_ahb
             - const: cci
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: cpas_ahb
+            - const: cci
+
 additionalProperties: false
 
 examples:

drivers/i2c/busses/Kconfig

@@ -196,6 +196,7 @@ config I2C_ISMT
 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
 	depends on PCI && HAS_IOPORT
+	select I2C_SMBUS
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following

drivers/i2c/busses/i2c-piix4.c

@@ -29,6 +29,7 @@
 #include <linux/stddef.h>
 #include <linux/ioport.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/slab.h>
 #include <linux/dmi.h>
 #include <linux/acpi.h>
@@ -982,6 +983,14 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 		return retval;
 	}
 
+	/*
+	 * The AUX bus can not be probed as on some platforms it reports all
+	 * devices present and all reads return "0".
+	 * This would allow the ee1004 to be probed incorrectly.
+	 */
+	if (port == 0)
+		i2c_register_spd(adap);
+
 	*padap = adap;
 	return 0;
 }

drivers/i2c/i2c-smbus.c

@@ -352,18 +352,11 @@ void i2c_register_spd(struct i2c_adapter *adap)
 		return;
 
 	/*
-	 * If we're a child adapter on a muxed segment, then limit slots to 8,
-	 * as this is the max number of SPD EEPROMs that can be addressed per bus.
+	 * The max number of SPD EEPROMs that can be addressed per bus is 8.
+	 * If more slots are present either muxed or multiple busses are
+	 * necessary or the additional slots are ignored.
 	 */
-	if (i2c_parent_is_i2c_adapter(adap)) {
-		slot_count = 8;
-	} else {
-		if (slot_count > 8) {
-			dev_warn(&adap->dev,
-				 "More than 8 memory slots on a single bus, contact i801 maintainer to add missing mux config\n");
-			return;
-		}
-	}
+	slot_count = min(slot_count, 8);
 
 	/*
 	 * Memory types could be found at section 7.18.2 (Memory Device — Type), table 78

drivers/i2c/muxes/i2c-mux-gpio.c

@@ -5,16 +5,17 @@
  * Peter Korsgaard <peter.korsgaard@barco.com>
  */
 
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
+#include <linux/module.h>
 #include <linux/overflow.h>
 #include <linux/platform_data/i2c-mux-gpio.h>
 #include <linux/platform_device.h>
-#include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/bits.h>
-#include <linux/gpio/consumer.h>
-#include <linux/gpio/driver.h>
 
 struct gpiomux {
 	struct i2c_mux_gpio_platform_data data;
@@ -37,6 +38,9 @@ static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
 
 	i2c_mux_gpio_set(mux, chan);
 
+	if (mux->data.settle_time)
+		fsleep(mux->data.settle_time);
+
 	return 0;
 }
 
@@ -116,6 +120,8 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
 	if (device_property_read_u32(dev, "idle-state", &mux->data.idle))
 		mux->data.idle = I2C_MUX_GPIO_NO_IDLE;
 
+	device_property_read_u32(dev, "settle-time-us", &mux->data.settle_time);
+
 	return 0;
 }
 

include/linux/i2c.h

@@ -30,7 +30,6 @@ extern const struct device_type i2c_client_type;
 /* --- General options ------------------------------------------------	*/
 
 struct i2c_msg;
-struct i2c_algorithm;
 struct i2c_adapter;
 struct i2c_client;
 struct i2c_driver;
@@ -512,16 +511,15 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
 #endif /* I2C_BOARDINFO */
 
 /**
- * struct i2c_algorithm - represent I2C transfer method
- * @xfer: Issue a set of i2c transactions to the given I2C adapter
- *   defined by the msgs array, with num messages available to transfer via
- *   the adapter specified by adap.
- * @xfer_atomic: same as @xfer. Yet, only using atomic context
- *   so e.g. PMICs can be accessed very late before shutdown. Optional.
- * @smbus_xfer: Issue smbus transactions to the given I2C adapter. If this
+ * struct i2c_algorithm - represent I2C transfer methods
+ * @xfer: Transfer a given number of messages defined by the msgs array via
+ *   the specified adapter.
+ * @xfer_atomic: Same as @xfer. Yet, only using atomic context so e.g. PMICs
+ *   can be accessed very late before shutdown. Optional.
+ * @smbus_xfer: Issue SMBus transactions to the given I2C adapter. If this
  *   is not present, then the bus layer will try and convert the SMBus calls
  *   into I2C transfers instead.
- * @smbus_xfer_atomic: same as @smbus_xfer. Yet, only using atomic context
+ * @smbus_xfer_atomic: Same as @smbus_xfer. Yet, only using atomic context
  *   so e.g. PMICs can be accessed very late before shutdown. Optional.
  * @functionality: Return the flags that this algorithm/adapter pair supports
  *   from the ``I2C_FUNC_*`` flags.
@@ -533,8 +531,6 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
  * @reg_slave: deprecated, use @reg_target
  * @unreg_slave: deprecated, use @unreg_target
  *
- *
- * The following structs are for those who like to implement new bus drivers:
  * i2c_algorithm is the interface to a class of hardware solutions which can
  * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
  * to name two of the most common.
@@ -550,9 +546,6 @@ struct i2c_algorithm {
 	 * to NULL. If an adapter algorithm can do SMBus access, set
 	 * smbus_xfer. If set to NULL, the SMBus protocol is simulated
 	 * using common I2C messages.
-	 *
-	 * xfer should return the number of messages successfully
-	 * processed, or a negative value on error
 	 */
 	union {
 		int (*xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,

include/linux/platform_data/i2c-mux-gpio.h

@@ -19,6 +19,7 @@
  *	position
  * @n_values: Number of multiplexer positions (busses to instantiate)
  * @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
+ * @settle_time: Delay to wait when a new bus is selected
  */
 struct i2c_mux_gpio_platform_data {
 	int parent;
@@ -26,6 +27,7 @@ struct i2c_mux_gpio_platform_data {
 	const unsigned *values;
 	int n_values;
 	unsigned idle;
+	u32 settle_time;
 };
 
 #endif /* _LINUX_I2C_MUX_GPIO_H */