tmakin/ack-tegra
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge 71a7507afb ("Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core") into android-mainline

Browse Source 
Steps on the way to 6.2-rc1

Change-Id: I9d64267f1444a265cff934624397272c6465bff8
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This commit is contained in:
Greg Kroah-Hartman
2023-01-26 12:53:46 +00:00
parent f00af9d68e 71a7507afb
commit 15b8f79022
925 changed files with 24052 additions and 14827 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Documentation/ABI/stable/sysfs-driver-speakup
+9
View File
@@ -35,6 +35,15 @@ Description: This controls cursor delay when using arrow keys. When a
characters. Set this to a higher value to adjust for the delay
and better synchronisation between cursor position and speech.
What: /sys/accessibility/speakup/cur_phonetic
KernelVersion: 6.2
Contact: speakup@linux-speakup.org
Description: This allows speakup to speak letters phoneticaly when arrowing through
a word letter by letter. This doesn't affect the spelling when typing
the characters. When cur_phonetic=1, speakup will speak characters
phoneticaly when arrowing over a letter. When cur_phonetic=0, speakup
will speak letters as normally.
What: /sys/accessibility/speakup/delimiters
KernelVersion: 2.6
Contact: speakup@linux-speakup.org
Documentation/ABI/testing/configfs-usb-gadget-uvc
+2 -2
View File
@@ -197,7 +197,7 @@ Description: Specific MJPEG format descriptors
read-only
bmaControls this format's data for bmaControls in
the streaming header
bmInterfaceFlags specifies interlace information,
bmInterlaceFlags specifies interlace information,
read-only
bAspectRatioY the X dimension of the picture aspect
ratio, read-only
@@ -253,7 +253,7 @@ Description: Specific uncompressed format descriptors
read-only
bmaControls this format's data for bmaControls in
the streaming header
bmInterfaceFlags specifies interlace information,
bmInterlaceFlags specifies interlace information,
read-only
bAspectRatioY the X dimension of the picture aspect
ratio, read-only
Documentation/ABI/testing/debugfs-driver-habanalabs
+7
View File
@@ -91,6 +91,13 @@ Description: Enables the root user to set the device to specific state.
Valid values are "disable", "enable", "suspend", "resume".
User can read this property to see the valid values
What: /sys/kernel/debug/habanalabs/hl<n>/device_release_watchdog_timeout
Date: Oct 2022
KernelVersion: 6.2
Contact: ttayar@habana.ai
Description: The watchdog timeout value in seconds for a device relese upon
certain error cases, after which the device is reset.
What: /sys/kernel/debug/habanalabs/hl<n>/dma_size
Date: Apr 2021
KernelVersion: 5.13
Documentation/ABI/testing/sysfs-bus-coreboot
+45
View File
@@ -0,0 +1,45 @@
What: /sys/bus/coreboot
Date: August 2022
Contact: Jack Rosenthal <jrosenth@chromium.org>
Description:
The coreboot bus provides a variety of virtual devices used to
access data structures created by the Coreboot BIOS.
What: /sys/bus/coreboot/devices/cbmem-<id>
Date: August 2022
Contact: Jack Rosenthal <jrosenth@chromium.org>
Description:
CBMEM is a downwards-growing memory region created by Coreboot,
and contains tagged data structures to be shared with payloads
in the boot process and the OS. Each CBMEM entry is given a
directory in /sys/bus/coreboot/devices based on its id.
A list of ids known to Coreboot can be found in the coreboot
source tree at
``src/commonlib/bsd/include/commonlib/bsd/cbmem_id.h``.
What: /sys/bus/coreboot/devices/cbmem-<id>/address
Date: August 2022
Contact: Jack Rosenthal <jrosenth@chromium.org>
Description:
This is the pyhsical memory address that the CBMEM entry's data
begins at, in hexadecimal (e.g., ``0x76ffe000``).
What: /sys/bus/coreboot/devices/cbmem-<id>/size
Date: August 2022
Contact: Jack Rosenthal <jrosenth@chromium.org>
Description:
This is the size of the CBMEM entry's data, in hexadecimal
(e.g., ``0x1234``).
What: /sys/bus/coreboot/devices/cbmem-<id>/mem
Date: August 2022
Contact: Jack Rosenthal <jrosenth@chromium.org>
Description:
A file exposing read/write access to the entry's data. Note
that this file does not support mmap(), as coreboot
does not guarantee that the data will be page-aligned.
The mode of this file is 0600. While there shouldn't be
anything security-sensitive contained in CBMEM, read access
requires root privileges given this is exposing a small subset
of physical memory.
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
+46
View File
@@ -0,0 +1,46 @@
What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
KernelVersion: 6.2
Contact: linux-iio@vger.kernel.org
Description:
Reading returns a list with the possible filter modes.
* "sinc4" - Sinc 4. Excellent noise performance. Long
1st conversion time. No natural 50/60Hz rejection.
* "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
time.
* "sinc3" - Sinc3. Moderate 1st conversion time.
Good noise performance.
* "sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling
frequency of 50Hz, achieves simultaneous 50Hz and 60Hz
rejection.
* "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
time. Best used with a sampling frequency of at least
216.19Hz.
* "sinc3+pf1" - Sinc3 + Post Filter 1. 53dB rejection @
50Hz, 58dB rejection @ 60Hz.
* "sinc3+pf2" - Sinc3 + Post Filter 2. 70dB rejection @
50Hz, 70dB rejection @ 60Hz.
* "sinc3+pf3" - Sinc3 + Post Filter 3. 99dB rejection @
50Hz, 103dB rejection @ 60Hz.
* "sinc3+pf4" - Sinc3 + Post Filter 4. 103dB rejection @
50Hz, 109dB rejection @ 60Hz.
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
KernelVersion: 6.2
Contact: linux-iio@vger.kernel.org
Description:
Set the filter mode of the differential channel. When the filter
mode changes, the in_voltageY-voltageZ_sampling_frequency and
in_voltageY-voltageZ_sampling_frequency_available attributes
might also change to accommodate the new filter mode.
If the current sampling frequency is out of range for the new
filter mode, the sampling frequency will be changed to the
closest valid one.
Documentation/ABI/testing/sysfs-bus-iio-adc-max11410
+13
View File
@@ -0,0 +1,13 @@
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_en
Date: September 2022
KernelVersion: 6.0
Contact: linux-iio@vger.kernel.org
Description:
Enable or disable a notch filter.
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_center
Date: September 2022
KernelVersion: 6.0
Contact: linux-iio@vger.kernel.org
Description:
Center frequency of the notch filter in Hz.
Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
+312
View File
@@ -0,0 +1,312 @@
What: /sys/bus/platform/devices/smpro-errmon.*/error_[core|mem|pcie|other]_[ce|ue]
KernelVersion: 6.1
Contact: Quan Nguyen <quan@os.amperecomputing.com>
Description:
(RO) Contains the 48-byte Ampere (Vendor-Specific) Error Record printed
in hex format according to the table below:
+--------+---------------+-------------+------------------------------------------------------------+
| Offset | Field | Size (byte) | Description |
+--------+---------------+-------------+------------------------------------------------------------+
| 00 | Error Type | 1 | See :ref:`the table below <smpro-error-types>` for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 01 | Subtype | 1 | See :ref:`the table below <smpro-error-types>` for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 02 | Instance | 2 | See :ref:`the table below <smpro-error-types>` for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 04 | Error status | 4 | See ARM RAS specification for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 08 | Error Address | 8 | See ARM RAS specification for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 16 | Error Misc 0 | 8 | See ARM RAS specification for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 24 | Error Misc 1 | 8 | See ARM RAS specification for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 32 | Error Misc 2 | 8 | See ARM RAS specification for details |
+--------+---------------+-------------+------------------------------------------------------------+
| 40 | Error Misc 3 | 8 | See ARM RAS specification for details |
+--------+---------------+-------------+------------------------------------------------------------+
The table below defines the value of error types, their subtype, subcomponent and instance:
.. _smpro-error-types:
+-----------------+------------+----------+----------------+----------------------------------------+
| Error Group | Error Type | Sub type | Sub component | Instance |
+-----------------+------------+----------+----------------+----------------------------------------+
| CPM (core) | 0 | 0 | Snoop-Logic | CPM # |
+-----------------+------------+----------+----------------+----------------------------------------+
| CPM (core) | 0 | 2 | Armv8 Core 1 | CPM # |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 1 | ERR1 | MCU # \| SLOT << 11 |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 2 | ERR2 | MCU # \| SLOT << 11 |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 3 | ERR3 | MCU # |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 4 | ERR4 | MCU # |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 5 | ERR5 | MCU # |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 6 | ERR6 | MCU # |
+-----------------+------------+----------+----------------+----------------------------------------+
| MCU (mem) | 1 | 7 | Link Error | MCU # |
+-----------------+------------+----------+----------------+----------------------------------------+
| Mesh (other) | 2 | 0 | Cross Point | X \| (Y << 5) \| NS <<11 |
+-----------------+------------+----------+----------------+----------------------------------------+
| Mesh (other) | 2 | 1 | Home Node(IO) | X \| (Y << 5) \| NS <<11 |
+-----------------+------------+----------+----------------+----------------------------------------+
| Mesh (other) | 2 | 2 | Home Node(Mem) | X \| (Y << 5) \| NS <<11 \| device<<12 |
+-----------------+------------+----------+----------------+----------------------------------------+
| Mesh (other) | 2 | 4 | CCIX Node | X \| (Y << 5) \| NS <<11 |
+-----------------+------------+----------+----------------+----------------------------------------+
| 2P Link (other) | 3 | 0 | N/A | Altra 2P Link # |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 0 | ERR0 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 1 | ERR1 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 2 | ERR2 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 3 | ERR3 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 4 | ERR4 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 5 | ERR5 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 6 | ERR6 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 7 | ERR7 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 8 | ERR8 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 9 | ERR9 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 10 | ERR10 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 11 | ERR11 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 12 | ERR12 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| GIC (other) | 5 | 13-21 | ERR13 | RC # + 1 |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TCU | 100 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU0 | 0 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU1 | 1 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU2 | 2 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU3 | 3 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU4 | 4 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU5 | 5 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU6 | 6 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU7 | 7 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU8 | 8 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMMU (other) | 6 | TBU9 | 9 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| PCIe AER (pcie) | 7 | Root | 0 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| PCIe AER (pcie) | 7 | Device | 1 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| PCIe RC (pcie) | 8 | RCA HB | 0 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| PCIe RC (pcie) | 8 | RCB HB | 1 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| PCIe RC (pcie) | 8 | RASDP | 8 | RC # |
+-----------------+------------+----------+----------------+----------------------------------------+
| OCM (other) | 9 | ERR0 | 0 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| OCM (other) | 9 | ERR1 | 1 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| OCM (other) | 9 | ERR2 | 2 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMpro (other) | 10 | ERR0 | 0 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMpro (other) | 10 | ERR1 | 1 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| SMpro (other) | 10 | MPA_ERR | 2 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| PMpro (other) | 11 | ERR0 | 0 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| PMpro (other) | 11 | ERR1 | 1 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
| PMpro (other) | 11 | MPA_ERR | 2 | 0 |
+-----------------+------------+----------+----------------+----------------------------------------+
Example::
# cat error_other_ue
880807001e004010401040101500000001004010401040100c0000000000000000000000000000000000000000000000
The detail of each sysfs entries is as below:
+-------------+---------------------------------------------------------+----------------------------------+
| Error | Sysfs entry | Description (when triggered) |
+-------------+---------------------------------------------------------+----------------------------------+
| Core's CE | /sys/bus/platform/devices/smpro-errmon.*/error_core_ce | Core has CE error |
+-------------+---------------------------------------------------------+----------------------------------+
| Core's UE | /sys/bus/platform/devices/smpro-errmon.*/error_core_ue | Core has UE error |
+-------------+---------------------------------------------------------+----------------------------------+
| Memory's CE | /sys/bus/platform/devices/smpro-errmon.*/error_mem_ce | Memory has CE error |
+-------------+---------------------------------------------------------+----------------------------------+
| Memory's UE | /sys/bus/platform/devices/smpro-errmon.*/error_mem_ue | Memory has UE error |
+-------------+---------------------------------------------------------+----------------------------------+
| PCIe's CE | /sys/bus/platform/devices/smpro-errmon.*/error_pcie_ce | any PCIe controller has CE error |
+-------------+---------------------------------------------------------+----------------------------------+
| PCIe's UE | /sys/bus/platform/devices/smpro-errmon.*/error_pcie_ue | any PCIe controller has UE error |
+-------------+---------------------------------------------------------+----------------------------------+
| Other's CE | /sys/bus/platform/devices/smpro-errmon.*/error_other_ce | any other CE error |
+-------------+---------------------------------------------------------+----------------------------------+
| Other's UE | /sys/bus/platform/devices/smpro-errmon.*/error_other_ue | any other UE error |
+-------------+---------------------------------------------------------+----------------------------------+
UE: Uncorrect-able Error
CE: Correct-able Error
For details, see section `3.3 Ampere (Vendor-Specific) Error Record Formats,
Altra Family RAS Supplement`.
What: /sys/bus/platform/devices/smpro-errmon.*/overflow_[core|mem|pcie|other]_[ce|ue]
KernelVersion: 6.1
Contact: Quan Nguyen <quan@os.amperecomputing.com>
Description:
(RO) Return the overflow status of each type HW error reported:
- 0 : No overflow
- 1 : There is an overflow and the oldest HW errors are dropped
The detail of each sysfs entries is as below:
+-------------+-----------------------------------------------------------+---------------------------------------+
| Overflow | Sysfs entry | Description |
+-------------+-----------------------------------------------------------+---------------------------------------+
| Core's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_core_ce | Core CE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| Core's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_core_ue | Core UE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| Memory's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_mem_ce | Memory CE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| Memory's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_mem_ue | Memory UE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| PCIe's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_pcie_ce | any PCIe controller CE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| PCIe's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_pcie_ue | any PCIe controller UE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| Other's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_other_ce| any other CE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
| Other's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_other_ue| other UE error overflow |
+-------------+-----------------------------------------------------------+---------------------------------------+
where:
- UE: Uncorrect-able Error
- CE: Correct-able Error
What: /sys/bus/platform/devices/smpro-errmon.*/[error|warn]_[smpro|pmpro]
KernelVersion: 6.1
Contact: Quan Nguyen <quan@os.amperecomputing.com>
Description:
(RO) Contains the internal firmware error/warning printed as hex format.
The detail of each sysfs entries is as below:
+---------------+------------------------------------------------------+--------------------------+
| Error | Sysfs entry | Description |
+---------------+------------------------------------------------------+--------------------------+
| SMpro error | /sys/bus/platform/devices/smpro-errmon.*/error_smpro | system has SMpro error |
+---------------+------------------------------------------------------+--------------------------+
| SMpro warning | /sys/bus/platform/devices/smpro-errmon.*/warn_smpro | system has SMpro warning |
+---------------+------------------------------------------------------+--------------------------+
| PMpro error | /sys/bus/platform/devices/smpro-errmon.*/error_pmpro | system has PMpro error |
+---------------+------------------------------------------------------+--------------------------+
| PMpro warning | /sys/bus/platform/devices/smpro-errmon.*/warn_pmpro | system has PMpro warning |
+---------------+------------------------------------------------------+--------------------------+
For details, see section `5.10 RAS Internal Error Register Definitions,
Altra Family Soc BMC Interface Specification`.
What: /sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot]
KernelVersion: 6.1
Contact: Quan Nguyen <quan@os.amperecomputing.com>
Description:
(RO) Contains the detail information in case of VRD/DIMM warning/hot events
in hex format as below::
AAAA
where:
- ``AAAA``: The event detail information data
The detail of each sysfs entries is as below:
+---------------+---------------------------------------------------------------+---------------------+
| Event | Sysfs entry | Description |
+---------------+---------------------------------------------------------------+---------------------+
| VRD HOT | /sys/bus/platform/devices/smpro-errmon.*/event_vrd_hot | VRD Hot |
+---------------+---------------------------------------------------------------+---------------------+
| VR Warn/Fault | /sys/bus/platform/devices/smpro-errmon.*/event_vrd_warn_fault | VR Warning or Fault |
+---------------+---------------------------------------------------------------+---------------------+
| DIMM HOT | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_hot | DIMM Hot |
+---------------+---------------------------------------------------------------+---------------------+
For more details, see section `5.7 GPI Status Registers,
Altra Family Soc BMC Interface Specification`.
What: /sys/bus/platform/devices/smpro-misc.*/boot_progress
KernelVersion: 6.1
Contact: Quan Nguyen <quan@os.amperecomputing.com>
Description:
(RO) Contains the boot stages information in hex as format below::
AABBCCCCCCCC
where:
- ``AA`` : The boot stages
- 00: SMpro firmware booting
- 01: PMpro firmware booting
- 02: ATF BL1 firmware booting
- 03: DDR initialization
- 04: DDR training report status
- 05: ATF BL2 firmware booting
- 06: ATF BL31 firmware booting
- 07: ATF BL32 firmware booting
- 08: UEFI firmware booting
- 09: OS booting
- ``BB`` : Boot status
- 00: Not started
- 01: Started
- 02: Completed without error
- 03: Failed.
- ``CCCCCCCC``: Boot status information defined for each boot stages
For details, see section `5.11 Boot Stage Register Definitions`
and section `6. Processor Boot Progress Codes, Altra Family Soc BMC
Interface Specification`.
What: /sys/bus/platform/devices/smpro-misc*/soc_power_limit
KernelVersion: 6.1
Contact: Quan Nguyen <quan@os.amperecomputing.com>
Description:
(RW) Contains the desired SoC power limit in Watt.
Writes to this sysfs set the desired SoC power limit (W).
Reads from this register return the current SoC power limit (W).
The value ranges:
- Minimum: 120 W
- Maximum: Socket TDP power
Documentation/ABI/testing/sysfs-bus-usb
+11
View File
@@ -264,6 +264,17 @@ Description:
attached to the port will not be detected, initialized,
or enumerated.
What: /sys/bus/usb/devices/.../<hub_interface>/port<X>/early_stop
Date: Sep 2022
Contact: Ray Chi <raychi@google.com>
Description:
Some USB hosts have some watchdog mechanisms so that the device
may enter ramdump if it takes a long time during port initialization.
This attribute allows each port just has two attempts so that the
port initialization will be failed quickly. In addition, if a port
which is marked with early_stop has failed to initialize, it will ignore
all future connections until this attribute is clear.
What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
Date: May 2013
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
Documentation/ABI/testing/sysfs-kernel-cpu_byteorder
+12
View File
@@ -0,0 +1,12 @@
What: /sys/kernel/cpu_byteorder
Date: February 2023
KernelVersion: 6.2
Contact: Thomas Weißschuh <linux@weissschuh.net>
Description:
The endianness of the running kernel.
Access: Read
Valid values:
"little", "big"
Users: util-linux
Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
+232
View File
@@ -0,0 +1,232 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
maintainers:
- Liu Ying <victor.liu@nxp.com>
description: |
i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
sitting together with the PHYs. It is not the same as the MSI bus coming
from i.MX8 System Controller Unit (SCU) which is used to control power,
clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
that is, MSI clock and AHB clock, need to be enabled so that peripherals
connected to the bus can be accessed. Also, the bus is part of a power
domain. The power domain needs to be enabled before the peripherals can
be accessed.
Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
like I2C controller, PWM controller, MIPI DSI controller and Control and
Status Registers (CSR) module, are accessed through the bus.
The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
pixel link MSI bus controller and does not allow SCFW user to control it.
So, the controller's registers cannot be accessed by SCFW user. Hence,
the interrupts generated by the controller don't make any sense from SCFW
user's point of view.
allOf:
- $ref: simple-pm-bus.yaml#
# We need a select here so we don't match all nodes with 'simple-pm-bus'.
select:
properties:
compatible:
contains:
enum:
- fsl,imx8qxp-display-pixel-link-msi-bus
- fsl,imx8qm-display-pixel-link-msi-bus
required:
- compatible
properties:
compatible:
items:
- enum:
- fsl,imx8qxp-display-pixel-link-msi-bus
- fsl,imx8qm-display-pixel-link-msi-bus
- const: simple-pm-bus
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: master gated clock from system
- description: AHB clock
clock-names:
items:
- const: msi
- const: ahb
patternProperties:
"^.*@[0-9a-f]+$":
description: Devices attached to the bus
type: object
properties:
reg:
maxItems: 1
required:
- reg
required:
- compatible
- reg
- clocks
- clock-names
- power-domains
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/imx8-lpcg.h>
#include <dt-bindings/firmware/imx/rsrc.h>
bus@56200000 {
compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
reg = <0x56200000 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&dc0_irqsteer>;
interrupts = <320>;
ranges;
clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
<&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
clock-names = "msi", "ahb";
power-domains = <&pd IMX_SC_R_DC_0>;
syscon@56221000 {
compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
reg = <0x56221000 0x1000>;
clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
clock-names = "ipg";
pxl2dpi {
compatible = "fsl,imx8qxp-pxl2dpi";
fsl,sc-resource = <IMX_SC_R_MIPI_0>;
power-domains = <&pd IMX_SC_R_MIPI_0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
reg = <0>;
remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
};
mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
reg = <1>;
remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
reg = <0>;
remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
};
mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
reg = <1>;
remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
};
};
};
};
ldb {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8qxp-ldb";
clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
<&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
clock-names = "pixel", "bypass";
power-domains = <&pd IMX_SC_R_LVDS_0>;
channel@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
phys = <&mipi_lvds_0_phy>;
phy-names = "lvds_phy";
port@0 {
reg = <0>;
mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
};
};
port@1 {
reg = <1>;
/* ... */
};
};
channel@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
phys = <&mipi_lvds_0_phy>;
phy-names = "lvds_phy";
port@0 {
reg = <0>;
mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
};
};
port@1 {
reg = <1>;
/* ... */
};
};
};
};
clock-controller@56223004 {
compatible = "fsl,imx8qxp-lpcg";
reg = <0x56223004 0x4>;
#clock-cells = <1>;
clocks = <&mipi_lvds_0_ipg_clk>;
clock-indices = <IMX_LPCG_CLK_4>;
clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
power-domains = <&pd IMX_SC_R_MIPI_0>;
};
phy@56228300 {
compatible = "fsl,imx8qxp-mipi-dphy";
reg = <0x56228300 0x100>;
clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
clock-names = "phy_ref";
#phy-cells = <0>;
fsl,syscon = <&mipi_lvds_0_csr>;
power-domains = <&pd IMX_SC_R_MIPI_0>;
};
};
Documentation/devicetree/bindings/eeprom/at24.yaml
+4 -1
View File
@@ -10,6 +10,9 @@ title: I2C EEPROMs compatible with Atmel's AT24
maintainers:
- Bartosz Golaszewski <bgolaszewski@baylibre.com>
allOf:
- $ref: /schemas/nvmem/nvmem.yaml
select:
properties:
compatible:
@@ -183,7 +186,7 @@ required:
- compatible
- reg
additionalProperties: false
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/eeprom/at25.yaml
+1
View File
@@ -104,6 +104,7 @@ required:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- $ref: /schemas/nvmem/nvmem.yaml
- if:
properties:
compatible:
Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
+1
View File
@@ -47,6 +47,7 @@ required:
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- $ref: /schemas/nvmem/nvmem.yaml
unevaluatedProperties: false
Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
+81
View File
@@ -0,0 +1,81 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Lattice Slave SPI sysCONFIG FPGA manager
maintainers:
- Ivan Bornyakov <i.bornyakov@metrotek.ru>
description: |
Lattice sysCONFIG port, which is used for FPGA configuration, among others,
have Slave Serial Peripheral Interface. Only full reconfiguration is
supported.
Programming of ECP5 is done by writing uncompressed bitstream image in .bit
format into FPGA's SRAM configuration memory.
properties:
compatible:
enum:
- lattice,sysconfig-ecp5
reg:
maxItems: 1
program-gpios:
description:
A GPIO line connected to PROGRAMN (active low) pin of the device.
Initiates configuration sequence.
maxItems: 1
init-gpios:
description:
A GPIO line connected to INITN (active low) pin of the device.
Indicates that the FPGA is ready to be configured.
maxItems: 1
done-gpios:
description:
A GPIO line connected to DONE (active high) pin of the device.
Indicates that the configuration sequence is complete.
maxItems: 1
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml
- if:
properties:
compatible:
contains:
const: lattice,sysconfig-ecp5
then:
properties:
spi-max-frequency:
maximum: 60000000
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
fpga-mgr@0 {
compatible = "lattice,sysconfig-ecp5";
reg = <0>;
spi-max-frequency = <20000000>;
program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
};
};
Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+5 -3
View File
@@ -4,20 +4,22 @@
$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
maintainers:
- Puranjay Mohan <puranjay12@gmail.com>
description: |
Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
both I2C & SPI interfaces
Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
support both I2C & SPI interfaces
https://www.analog.com/en/products/adxl355.html
https://www.analog.com/en/products/adxl359.html
properties:
compatible:
enum:
- adi,adxl355
- adi,adxl359
reg:
maxItems: 1
Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
+65
View File
@@ -0,0 +1,65 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM/Kionix KX022A Accelerometer
maintainers:
- Matti Vaittinen <mazziesaccount@gmail.com>
description: |
KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
KX022A can be accessed either via I2C or SPI.
properties:
compatible:
const: kionix,kx022a
reg:
maxItems: 1
interrupts:
minItems: 1
maxItems: 2
interrupt-names:
minItems: 1
items:
- enum: [INT1, INT2]
- const: INT2
vdd-supply: true
io-vdd-supply: true
mount-matrix:
description: |
an optional 3x3 mounting rotation matrix.
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
accel@1f {
compatible = "kionix,kx022a";
reg = <0x1f>;
interrupt-parent = <&gpio1>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
io-vdd-supply = <&iovdd>;
vdd-supply = <&vdd>;
};
};
Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
+262
View File
@@ -0,0 +1,262 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2022 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD4130 ADC device driver
maintainers:
- Cosmin Tanislav <cosmin.tanislav@analog.com>
description: |
Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
properties:
compatible:
enum:
- adi,ad4130
reg:
maxItems: 1
clocks:
maxItems: 1
description: phandle to the master clock (mclk)
clock-names:
items:
- const: mclk
interrupts:
maxItems: 1
interrupt-names:
description: |
Specify which interrupt pin should be configured as Data Ready / FIFO
interrupt.
Default if not supplied is int.
enum:
- int
- clk
- p2
- dout
'#address-cells':
const: 1
'#size-cells':
const: 0
'#clock-cells':
const: 0
clock-output-names:
maxItems: 1
refin1-supply:
description: refin1 supply. Can be used as reference for conversion.
refin2-supply:
description: refin2 supply. Can be used as reference for conversion.
avdd-supply:
description: AVDD voltage supply. Can be used as reference for conversion.
iovdd-supply:
description: IOVDD voltage supply. Used for the chip interface.
spi-max-frequency:
maximum: 5000000
adi,ext-clk-freq-hz:
description: Specify the frequency of the external clock.
enum: [76800, 153600]
default: 76800
adi,bipolar:
description: Specify if the device should be used in bipolar mode.
type: boolean
adi,vbias-pins:
description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 16
items:
minimum: 0
maximum: 15
required:
- compatible
- reg
- interrupts
patternProperties:
"^channel@([0-9a-f])$":
type: object
$ref: adc.yaml
unevaluatedProperties: false
properties:
reg:
description: The channel number.
minimum: 0
maximum: 15
diff-channels:
description: |
Besides the analog inputs available, internal inputs can be used.
16: Internal temperature sensor.
17: AVSS
18: Internal reference
19: DGND
20: (AVDD − AVSS)/6+
21: (AVDD − AVSS)/6-
22: (IOVDD − DGND)/6+
23: (IOVDD − DGND)/6-
24: (ALDO − AVSS)/6+
25: (ALDO − AVSS)/6-
26: (DLDO − DGND)/6+
27: (DLDO − DGND)/6-
28: V_MV_P
29: V_MV_M
items:
minimum: 0
maximum: 29
adi,reference-select:
description: |
Select the reference source to use when converting on the
specific channel. Valid values are:
0: REFIN1(+)/REFIN1(−)
1: REFIN2(+)/REFIN2(−)
2: REFOUT/AVSS (Internal reference)
3: AVDD/AVSS
If not specified, REFIN1 is used.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
adi,excitation-pin-0:
description: |
Analog input to apply excitation current to while the channel
is active.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 0
adi,excitation-pin-1:
description: |
Analog input to apply excitation current to while this channel
is active.
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 0
adi,excitation-current-0-nanoamp:
description: |
Excitation current in nanoamps to be applied to pin specified in
adi,excitation-pin-0 while this channel is active.
enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
default: 0
adi,excitation-current-1-nanoamp:
description: |
Excitation current in nanoamps to be applied to pin specified in
adi,excitation-pin-1 while this channel is active.
enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
default: 0
adi,burnout-current-nanoamp:
description: |
Burnout current in nanoamps to be applied for this channel.
enum: [0, 500, 2000, 4000]
default: 0
adi,buffered-positive:
description: Enable buffered mode for positive input.
type: boolean
adi,buffered-negative:
description: Enable buffered mode for negative input.
type: boolean
required:
- reg
- diff-channels
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "adi,ad4130";
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <5000000>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
interrupt-parent = <&gpio>;
channel@0 {
reg = <0>;
adi,reference-select = <2>;
/* AIN8, AIN9 */
diff-channels = <8 9>;
};
channel@1 {
reg = <1>;
adi,reference-select = <2>;
/* AIN10, AIN11 */
diff-channels = <10 11>;
};
channel@2 {
reg = <2>;
adi,reference-select = <2>;
/* Temperature Sensor, DGND */
diff-channels = <16 19>;
};
channel@3 {
reg = <3>;
adi,reference-select = <2>;
/* Internal reference, DGND */
diff-channels = <18 19>;
};
channel@4 {
reg = <4>;
adi,reference-select = <2>;
/* DGND, DGND */
diff-channels = <19 19>;
};
};
};
Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+17 -9
View File
@@ -11,7 +11,7 @@ maintainers:
description: |
Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
AD7918, AD7928 8 Channels ADCs.
AD7918, AD7927, AD7928 8 Channels ADCs.
Specifications about the part can be found at:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
@@ -20,14 +20,22 @@ description: |
properties:
compatible:
enum:
- adi,ad7904
- adi,ad7914
- adi,ad7923
- adi,ad7924
- adi,ad7908
- adi,ad7918
- adi,ad7928
oneOf:
- enum:
- adi,ad7904
- adi,ad7908
- adi,ad7914
- adi,ad7918
- adi,ad7923
- adi,ad7928
- const: adi,ad7924
deprecated: true
- items:
- const: adi,ad7924
- const: adi,ad7923
- items:
- const: adi,ad7927
- const: adi,ad7928
reg:
maxItems: 1
Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
+177
View File
@@ -0,0 +1,177 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2022 Analog Devices Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices MAX11410 ADC device driver
maintainers:
- Ibrahim Tilki <Ibrahim.Tilki@analog.com>
description: |
Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
found here:
https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
properties:
compatible:
enum:
- adi,max11410
reg:
maxItems: 1
interrupts:
minItems: 1
maxItems: 2
interrupt-names:
description: Name of the gpio pin of max11410 used for IRQ
minItems: 1
items:
- enum: [gpio0, gpio1]
- const: gpio1
'#address-cells':
const: 1
'#size-cells':
const: 0
avdd-supply:
description: Optional avdd supply. Used as reference when no explicit reference supplied.
vref0p-supply:
description: vref0p supply can be used as reference for conversion.
vref1p-supply:
description: vref1p supply can be used as reference for conversion.
vref2p-supply:
description: vref2p supply can be used as reference for conversion.
vref0n-supply:
description: vref0n supply can be used as reference for conversion.
vref1n-supply:
description: vref1n supply can be used as reference for conversion.
vref2n-supply:
description: vref2n supply can be used as reference for conversion.
spi-max-frequency:
maximum: 8000000
patternProperties:
"^channel(@[0-9])?$":
$ref: adc.yaml
type: object
description: Represents the external channels which are connected to the ADC.
properties:
reg:
description: The channel number in single-ended mode.
minimum: 0
maximum: 9
adi,reference:
description: |
Select the reference source to use when converting on
the specific channel. Valid values are:
0: VREF0P/VREF0N
1: VREF1P/VREF1N
2: VREF2P/VREF2N
3: AVDD/AGND
4: VREF0P/AGND
5: VREF1P/AGND
6: VREF2P/AGND
If this field is left empty, AVDD/AGND is selected.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6]
default: 3
adi,input-mode:
description: |
Select signal path of input channels. Valid values are:
0: Buffered, low-power, unity-gain path (default)
1: Bypass path
2: PGA path
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
default: 0
diff-channels: true
bipolar: true
settling-time-us: true
adi,buffered-vrefp:
description: Enable buffered mode for positive reference.
type: boolean
adi,buffered-vrefn:
description: Enable buffered mode for negative reference.
type: boolean
required:
- reg
additionalProperties: false
required:
- compatible
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
reg = <0>;
compatible = "adi,max11410";
spi-max-frequency = <8000000>;
interrupt-parent = <&gpio>;
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "gpio1";
avdd-supply = <&adc_avdd>;
vref1p-supply = <&adc_vref1p>;
vref1n-supply = <&adc_vref1n>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0>;
};
channel@1 {
reg = <1>;
diff-channels = <2 3>;
adi,reference = <1>;
bipolar;
settling-time-us = <100000>;
};
channel@2 {
reg = <2>;
diff-channels = <7 9>;
adi,reference = <5>;
adi,input-mode = <2>;
settling-time-us = <50000>;
};
};
};
Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+5 -2
View File
@@ -18,7 +18,10 @@ description: |
properties:
compatible:
const: qcom,spmi-iadc
items:
- enum:
- qcom,pm8941-iadc
- const: qcom,spmi-iadc
reg:
description: IADC base address and length in the SPMI PMIC register map
@@ -50,7 +53,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
pmic_iadc: adc@3600 {
compatible = "qcom,spmi-iadc";
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
reg = <0x3600>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+5 -7
View File
@@ -22,13 +22,11 @@ properties:
- items:
- const: qcom,pms405-adc
- const: qcom,spmi-adc-rev2
- items:
- enum:
- qcom,spmi-vadc
- qcom,spmi-adc5
- qcom,spmi-adc-rev2
- qcom,spmi-adc7
- enum:
- qcom,spmi-vadc
- qcom,spmi-adc5
- qcom,spmi-adc-rev2
- qcom,spmi-adc7
reg:
description: VADC base address in the SPMI PMIC register map
Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
+1 -1
View File
@@ -19,7 +19,7 @@ properties:
compatible:
items:
- enum:
- renesas,r9a07g043-adc # RZ/G2UL
- renesas,r9a07g043-adc # RZ/G2UL and RZ/Five
- renesas,r9a07g044-adc # RZ/G2L
- renesas,r9a07g054-adc # RZ/V2L
- const: renesas,rzg2l-adc
Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+1
View File
@@ -22,6 +22,7 @@ properties:
- rockchip,rk3328-saradc
- rockchip,rk3568-saradc
- rockchip,rv1108-saradc
- rockchip,rv1126-saradc
- const: rockchip,rk3399-saradc
reg:
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+65 -3
View File
@@ -27,6 +27,7 @@ properties:
- st,stm32f4-adc-core
- st,stm32h7-adc-core
- st,stm32mp1-adc-core
- st,stm32mp13-adc-core
reg:
maxItems: 1
@@ -37,6 +38,7 @@ properties:
- stm32f4 and stm32h7 share a common ADC interrupt line.
- stm32mp1 has two separate interrupt lines, one for each ADC within
ADC block.
- stm32mp13 has an interrupt line per ADC block.
minItems: 1
maxItems: 2
@@ -180,6 +182,33 @@ allOf:
maximum: 36000000
default: 36000000
- if:
properties:
compatible:
contains:
const: st,stm32mp13-adc-core
then:
properties:
clocks:
minItems: 1
maxItems: 2
clock-names:
items:
- const: bus
- const: adc
minItems: 1
interrupts:
items:
- description: ADC interrupt line
st,max-clk-rate-hz:
minimum: 150000
maximum: 75000000
default: 75000000
additionalProperties: false
required:
@@ -208,6 +237,7 @@ patternProperties:
- st,stm32f4-adc
- st,stm32h7-adc
- st,stm32mp1-adc
- st,stm32mp13-adc
reg:
description: |
@@ -229,7 +259,7 @@ patternProperties:
interrupts:
description: |
IRQ Line for the ADC instance. Valid values are:
- 0 for adc@0
- 0 for adc@0 (single adc for stm32mp13)
- 1 for adc@100
- 2 for adc@200 (stm32f4 only)
maxItems: 1
@@ -250,13 +280,14 @@ patternProperties:
assigned-resolution-bits:
description: |
Resolution (bits) to use for conversions:
- can be 6, 8, 10 or 12 on stm32f4
- can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
- can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
st,adc-channels:
description: |
List of single-ended channels muxed for this ADC. It can have up to:
- 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
- 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
- 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
stm32mp1.
$ref: /schemas/types.yaml#/definitions/uint32-array
@@ -322,7 +353,7 @@ patternProperties:
label:
description: |
Unique name to identify which channel this is.
Reserved label names "vddcore", "vrefint" and "vbat"
Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
are used to identify internal channels with matching names.
diff-channels:
@@ -419,6 +450,37 @@ patternProperties:
items:
minimum: 40
- if:
properties:
compatible:
contains:
const: st,stm32mp13-adc
then:
properties:
reg:
const: 0x0
interrupts:
const: 0
assigned-resolution-bits:
enum: [6, 8, 10, 12]
default: 12
st,adc-channels:
minItems: 1
maxItems: 19
items:
minimum: 0
maximum: 18
st,min-sample-time-nsecs:
minItems: 1
maxItems: 19
items:
minimum: 40
additionalProperties: false
required:
Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
+373
View File
@@ -0,0 +1,373 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/addac/adi,ad74115.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD74115H device
maintainers:
- Cosmin Tanislav <cosmin.tanislav@analog.com>
description: |
The AD74115H is a single-channel software configurable input/output
device for industrial control applications. It contains functionality for
analog output, analog input, digital output, digital input, resistance
temperature detector, and thermocouple measurements integrated into a single
chip solution with an SPI interface. The device features a 16-bit ADC and a
14-bit DAC.
https://www.analog.com/en/products/ad74115h.html
properties:
compatible:
enum:
- adi,ad74115h
reg:
maxItems: 1
spi-max-frequency:
maximum: 24000000
spi-cpol: true
reset-gpios: true
interrupts:
minItems: 1
maxItems: 2
interrupt-names:
minItems: 1
maxItems: 2
items:
enum:
- adc_rdy
- alert
avdd-supply: true
avcc-supply: true
dvcc-supply: true
dovdd-supply: true
refin-supply: true
adi,ch-func:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Channel function.
0 - High impedance
1 - Voltage output
2 - Current output
3 - Voltage input
4 - Current input, externally-powered
5 - Current input, loop-powered
6 - Resistance input
7 - RTD measure
8 - Digital input logic
9 - Digital input, loop-powered
10 - Current output with HART
11 - Current input, externally-powered, with HART
12 - Current input, loop-powered, with HART
minimum: 0
maximum: 12
default: 0
adi,conv2-mux:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
Input node for ADC conversion 2.
0 - SENSE_EXT1 to AGND_SENSE
1 - SENSE_EXT2 to AGND_SENSE
2 - SENSE_EXT2 to SENSE_EXT1
3 - AGND to AGND
minimum: 0
maximum: 3
default: 0
adi,conv2-range-microvolt:
description: Conversion range for ADC conversion 2.
oneOf:
- items:
- enum: [-2500000, 0]
- const: 2500000
- items:
- enum: [-12000000, 0]
- const: 12000000
- items:
- const: -2500000
- const: 0
- items:
- const: -104000
- const: 104000
- items:
- const: 0
- const: 625000
adi,sense-agnd-buffer-low-power:
type: boolean
description:
Whether to enable low-power buffered mode for the AGND sense pin.
adi,lf-buffer-low-power:
type: boolean
description:
Whether to enable low-power buffered mode for the low-side filtered
sense pin.
adi,hf-buffer-low-power:
type: boolean
description:
Whether to enable low-power buffered mode for the high-side filtered
sense pin.
adi,ext2-buffer-low-power:
type: boolean
description: Whether to enable low-power buffered mode for the EXT2 pin.
adi,ext1-buffer-low-power:
type: boolean
description: Whether to enable low-power buffered mode for the EXT1 pin.
adi,comparator-invert:
type: boolean
description: Whether to invert the comparator output.
adi,digital-input-sink-range-high:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
When not present, the digital input range is from 0 to 3700uA in steps
of 120uA, with a ~2k series resistance.
When present, the digital input range is from 0 to 7400uA in steps
of 240uA, with a ~1k series resistance.
adi,digital-input-sink-microamp:
description: Sink current in digital input mode.
minimum: 0
maximum: 3700
default: 0
adi,digital-input-debounce-mode-counter-reset:
type: boolean
description: |
When not present, a counter increments when the signal is asserted
and decrements when the signal is de-asserted.
When present, a counter increments while the signal is asserted and
resets when the signal de-asserts
adi,digital-input-unbuffered:
type: boolean
description: Whether to buffer digital input signals.
adi,digital-input-short-circuit-detection:
type: boolean
description: Whether to detect digital input short circuits.
adi,digital-input-open-circuit-detection:
type: boolean
description: Whether to detect digital input open circuits.
adi,digital-input-threshold-mode-fixed:
type: boolean
description: |
When not present, the digital input threshold range is -0.96 * AVDD
to AVDD.
When present, the threshold range is fixed from -19V to 30V.
adi,dac-bipolar:
type: boolean
description: |
When not present, the DAC operates in the 0V to 12V range.
When present, the DAC operates in the -12V to 12V range.
adi,charge-pump:
type: boolean
description: Whether to enable the internal charge pump.
adi,dac-hart-slew:
type: boolean
description: Whether to use a HART-compatible slew rate.
adi,dac-current-limit-low:
type: boolean
description: |
When not present, the DAC short-circuit current limit is 32mA in
either source or sink for VOUT and 4mA sink for IOUT.
When present, the limit is 16mA in either source or sink for VOUT,
1mA sink for IOUT.
adi,4-wire-rtd:
type: boolean
description: |
When not present, the ADC should be used for measuring 3-wire RTDs.
When present, the ADC should be used for measuring 4-wire RTDs.
adi,3-wire-rtd-excitation-swap:
type: boolean
description: Whether to swap the excitation for 3-wire RTD.
adi,rtd-excitation-current-microamp:
description: Excitation current to apply to RTD.
enum: [250, 500, 750, 1000]
default: 250
adi,ext1-burnout:
type: boolean
description: Whether to enable burnout current for EXT1.
adi,ext1-burnout-current-nanoamp:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Burnout current in nanoamps to be applied to EXT1.
enum: [0, 50, 500, 1000, 10000]
default: 0
adi,ext1-burnout-current-polarity-sourcing:
type: boolean
description: |
When not present, the burnout current polarity for EXT1 is sinking.
When present, the burnout current polarity for EXT1 is sourcing.
adi,ext2-burnout:
type: boolean
description: Whether to enable burnout current for EXT2.
adi,ext2-burnout-current-nanoamp:
$ref: /schemas/types.yaml#/definitions/uint32
description: Burnout current in nanoamps to be applied to EXT2.
enum: [0, 50, 500, 1000, 10000]
default: 0
adi,ext2-burnout-current-polarity-sourcing:
type: boolean
description: |
When not present, the burnout current polarity for EXT2 is sinking.
When present, the burnout current polarity for EXT2 is sourcing.
adi,viout-burnout:
type: boolean
description: Whether to enable burnout current for VIOUT.
adi,viout-burnout-current-nanoamp:
$ref: /schemas/types.yaml#/definitions/uint32
description: Burnout current in nanoamps to be applied to VIOUT.
enum: [0, 1000, 10000]
default: 0
adi,viout-burnout-current-polarity-sourcing:
type: boolean
description: |
When not present, the burnout current polarity for VIOUT is sinking.
When present, the burnout current polarity for VIOUT is sourcing.
adi,gpio0-mode:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
GPIO functions.
0 - Disabled
1 - Logic I/O
2 - Comparator output
3 - Control HART CD
4 - Monitor HART CD
5 - Monitor HART EOM status
minimum: 0
maximum: 5
default: 0
adi,gpio1-mode:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
GPIO functions.
0 - Disabled
1 - Logic I/O
2 - Drive external digital output FET
3 - Control HART RXD
4 - Monitor HART RXD
5 - Monitor HART SOM status
minimum: 0
maximum: 5
default: 0
adi,gpio2-mode:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
GPIO functions.
0 - Disabled
1 - Logic I/O
2 - Drive internal digital output FET
3 - Control HART TXD
4 - Monitor HART TXD
5 - Monitor HART TX complete status
minimum: 0
maximum: 5
default: 0
adi,gpio3-mode:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
GPIO functions.
0 - Disabled
1 - Logic I/O
2 - High impedance
3 - Control HART RTS
4 - Monitor HART RTS
5 - Monitor HART CD complete status
minimum: 0
maximum: 5
default: 0
required:
- compatible
- reg
- spi-cpol
- avdd-supply
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
required:
- adi,digital-input-sink-range-high
then:
properties:
adi,digital-input-sink-microamp:
maximum: 7400
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
addac@0 {
compatible = "adi,ad74115h";
reg = <0>;
spi-max-frequency = <12000000>;
spi-cpol;
reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
interrupt-parent = <&gpio>;
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
interrupt-names = "adc_rdy";
avdd-supply = <&ad74115_avdd>;
adi,ch-func = <1>;
adi,conv2-mux = <2>;
adi,conv2-range-microvolt = <(-12000000) 12000000>;
adi,gpio0-mode = <1>;
adi,gpio1-mode = <1>;
adi,gpio2-mode = <1>;
adi,gpio3-mode = <1>;
adi,dac-bipolar;
};
};
...
Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
+10 -5
View File
@@ -51,6 +51,9 @@ properties:
Shunt (sense) resistor value in micro-Ohms.
default: 100000000
reset-gpios:
maxItems: 1
required:
- compatible
- reg
@@ -58,8 +61,6 @@ required:
- spi-cpol
- refin-supply
additionalProperties: false
patternProperties:
"^channel@[0-3]$":
type: object
@@ -103,6 +104,11 @@ patternProperties:
required:
- reg
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
@@ -113,9 +119,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
ad74413r@0 {
addac@0 {
compatible = "adi,ad74413r";
reg = <0>;
spi-max-frequency = <1000000>;
@@ -128,6 +132,7 @@ examples:
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
refin-supply = <&ad74413r_refin>;
reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
channel@0 {
reg = <0>;
Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+1 -2
View File
@@ -102,8 +102,7 @@ allOf:
- if:
properties:
adi,dc-dc-mode:
contains:
enum: [1, 3]
enum: [1, 3]
then:
properties:
adi,range-microvolt: false
Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+1 -1
View File
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD5766 DAC device driver
maintainers:
- Cristian Pop <cristian.pop@analog.com>
- Nuno Sá <nuno.sa@analog.com>
description: |
Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
+5 -2
View File
@@ -160,13 +160,16 @@ properties:
2: +2dBm
3: +5dBm
additionalProperties: false
required:
- compatible
- reg
- clocks
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
+92
View File
@@ -0,0 +1,92 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/frequency/adi,adf4377.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ADF4377 Microwave Wideband Synthesizer with Integrated VCO
maintainers:
- Antoniu Miclaus <antoniu.miclaus@analog.com>
- Dragos Bogdan <dragos.bogdan@analog.com>
description: |
The ADF4377 is a high performance, ultralow jitter, dual output integer-N
phased locked loop (PLL) with integrated voltage controlled oscillator (VCO)
ideally suited for data converter and mixed signal front end (MxFE) clock
applications.
https://www.analog.com/en/products/adf4377.html
properties:
compatible:
enum:
- adi,adf4377
- adi,adf4378
reg:
maxItems: 1
spi-max-frequency:
maximum: 10000000
clocks:
maxItems: 1
clock-names:
description:
External clock that provides reference input frequency.
items:
- const: ref_in
chip-enable-gpios:
description:
GPIO that controls the Chip Enable Pin.
maxItems: 1
clk1-enable-gpios:
description:
GPIO that controls the Enable Clock 1 Output Buffer Pin.
maxItems: 1
clk2-enable-gpios:
description:
GPIO that controls the Enable Clock 2 Output Buffer Pin.
maxItems: 1
adi,muxout-select:
description:
On chip multiplexer output selection.
high_z - MUXOUT Pin set to high-Z.
lock_detect - MUXOUT Pin set to lock detector output.
muxout_low - MUXOUT Pin set to low.
f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2.
f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2.
muxout_high - MUXOUT Pin set to high.
enum: [high_z, lock_detect, muxout_low, f_div_rclk_2, f_div_nclk_2, muxout_high]
required:
- compatible
- reg
- clocks
- clock-names
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
frequency@0 {
compatible = "adi,adf4377";
reg = <0>;
spi-max-frequency = <10000000>;
clocks = <&adf4377_ref_in>;
clock-names = "ref_in";
};
};
...
Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
+4 -1
View File
@@ -70,7 +70,10 @@ required:
- clock-names
- vcm-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
+4 -1
View File
@@ -104,7 +104,10 @@ required:
- clock-names
- vcm-supply
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
+6 -2
View File
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: ADMV4420 K Band Downconverter
maintainers:
- Cristian Pop <cristian.pop@analog.com>
- Nuno Sá <nuno.sa@analog.com>
description:
The ADMV4420 is a highly integrated, double balanced, active
@@ -37,7 +37,11 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
+4 -1
View File
@@ -113,7 +113,10 @@ required:
- clocks
- clock-names
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
+4 -1
View File
@@ -38,7 +38,10 @@ required:
- spi-cpol
- spi-cpha
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+4 -1
View File
@@ -56,7 +56,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+2 -1
View File
@@ -79,6 +79,7 @@ required:
- spi-cpol
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
- if:
properties:
compatible:
@@ -107,7 +108,7 @@ allOf:
dependencies:
adi,sync-mode: [ clocks ]
additionalProperties: false
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+1
View File
@@ -31,6 +31,7 @@ properties:
- invensense,icm42602
- invensense,icm42605
- invensense,icm42622
- invensense,icm42631
reg:
maxItems: 1
Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+8
View File
@@ -32,12 +32,20 @@ properties:
- st,lsm6dsrx
- st,lsm6dst
- st,lsm6dsop
- st,lsm6dsv
- st,lsm6dso16is
- items:
- const: st,asm330lhhx
- const: st,lsm6dsr
- items:
- const: st,lsm6dstx
- const: st,lsm6dst
- items:
- const: st,lsm6dsv16x
- const: st,lsm6dsv
- items:
- const: st,ism330is
- const: st,lsm6dso16is
reg:
maxItems: 1
Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
+5 -1
View File
@@ -30,7 +30,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
@@ -52,6 +55,7 @@ examples:
compatible = "meas,ms5611";
reg = <0>;
vdd-supply = <&ldo_3v3_gnss>;
spi-max-frequency = <20000000>;
};
};
...
Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
+4 -1
View File
@@ -33,7 +33,10 @@ required:
- compatible
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
+4 -1
View File
@@ -49,7 +49,10 @@ required:
- spi-cpha
- interrupts
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
+5 -2
View File
@@ -33,8 +33,6 @@ properties:
spi-cpha: true
additionalProperties: false
required:
- compatible
- reg
@@ -43,6 +41,11 @@ dependencies:
spi-cpol: [ spi-cpha ]
spi-cpha: [ spi-cpol ]
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
spi {
Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+208 -128
View File
@@ -4,19 +4,30 @@
$id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices LTC2983 Multi-sensor Temperature system
title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system
maintainers:
- Nuno Sá <nuno.sa@analog.com>
description: |
Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital
Temperature Measurement Systems
https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf
properties:
compatible:
enum:
- adi,ltc2983
oneOf:
- enum:
- adi,ltc2983
- adi,ltc2986
- adi,ltm2985
- items:
- const: adi,ltc2984
- const: adi,ltc2983
reg:
maxItems: 1
@@ -25,26 +36,26 @@ properties:
maxItems: 1
adi,mux-delay-config-us:
description:
The LTC2983 performs 2 or 3 internal conversion cycles per temperature
result. Each conversion cycle is performed with different excitation and
input multiplexer configurations. Prior to each conversion, these
excitation circuits and input switch configurations are changed and an
internal 1ms delay ensures settling prior to the conversion cycle in most
cases. An extra delay can be configured using this property. The value is
rounded to nearest 100us.
description: |
Extra delay prior to each conversion, in addition to the internal 1ms
delay, for the multiplexer to switch input configurations and
excitation values.
This property is supposed to be in microseconds, but to maintain
compatibility, this value will be multiplied by 100 before usage.
maximum: 255
default: 0
adi,filter-notch-freq:
description:
Set's the default setting of the digital filter. The default is
simultaneous 50/60Hz rejection.
Notch frequency of the digital filter.
0 - 50/60Hz rejection
1 - 60Hz rejection
2 - 50Hz rejection
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 2
default: 0
'#address-cells':
const: 1
@@ -53,19 +64,20 @@ properties:
const: 0
patternProperties:
"@([1-9]|1[0-9]|20)$":
"@([0-9a-f]+)$":
type: object
description: Sensor.
properties:
reg:
description:
The channel number. It can be connected to one of the 20 channels of
the device.
Channel number. Connects the sensor to the channel with this number
of the device.
minimum: 1
maximum: 20
adi,sensor-type:
description: Identifies the type of sensor connected to the device.
description: Type of sensor connected to the device.
$ref: /schemas/types.yaml#/definitions/uint32
required:
@@ -74,9 +86,7 @@ patternProperties:
"^thermocouple@":
type: object
description:
Represents a thermocouple sensor which is connected to one of the device
channels.
description: Thermocouple sensor.
properties:
adi,sensor-type:
@@ -95,86 +105,87 @@ patternProperties:
maximum: 9
adi,single-ended:
description:
Boolean property which set's the thermocouple as single-ended.
description: Whether the sensor is single-ended.
type: boolean
adi,sensor-oc-current-microamp:
description:
This property set's the pulsed current value applied during
open-circuit detect.
description: Pulsed current value applied during open-circuit detect.
enum: [10, 100, 500, 1000]
default: 10
adi,cold-junction-handle:
description:
Phandle which points to a sensor object responsible for measuring
the thermocouple cold junction temperature.
$ref: "/schemas/types.yaml#/definitions/phandle"
Sensor responsible for measuring the thermocouple cold junction
temperature.
$ref: /schemas/types.yaml#/definitions/phandle
adi,custom-thermocouple:
description:
This is a table, where each entry should be a pair of
voltage(mv)-temperature(K). The entries must be given in nv and uK
so that, the original values must be multiplied by 1000000. For
more details look at table 69 and 70.
Note should be signed, but dtc doesn't currently maintain the
sign.
Used for digitizing custom thermocouples.
See Page 59 of the datasheet.
$ref: /schemas/types.yaml#/definitions/uint64-matrix
minItems: 3
maxItems: 64
items:
minItems: 2
maxItems: 2
items:
- description: Voltage point in nV, signed.
- description: Temperature point in uK.
allOf:
- if:
properties:
adi,sensor-type:
const: 9
then:
required:
- adi,custom-thermocouple
"^diode@":
type: object
description:
Represents a diode sensor which is connected to one of the device
channels.
description: Diode sensor.
properties:
adi,sensor-type:
description: Identifies the sensor as a diode.
description: Sensor type for diodes.
$ref: /schemas/types.yaml#/definitions/uint32
const: 28
adi,single-ended:
description: Boolean property which set's the diode as single-ended.
description: Whether the sensor is single-ended.
type: boolean
adi,three-conversion-cycles:
description:
Boolean property which set's three conversion cycles removing
parasitic resistance effects between the LTC2983 and the diode.
Whether to use three conversion cycles to remove parasitic
resistance between the device and the diode.
type: boolean
adi,average-on:
description:
Boolean property which enables a running average of the diode
temperature reading. This reduces the noise when the diode is used
as a cold junction temperature element on an isothermal block
where temperatures change slowly.
Whether to use a running average of the diode temperature
reading to reduce the noise when the diode is used as a cold
junction temperature element on an isothermal block where
temperatures change slowly.
type: boolean
adi,excitation-current-microamp:
description:
This property controls the magnitude of the excitation current
applied to the diode. Depending on the number of conversions
cycles, this property will assume different predefined values on
each cycle. Just set the value of the first cycle (1l).
Magnitude of the 1l excitation current applied to the diode.
4l excitation current will be 4 times this value, and 8l
excitation current will be 8 times value.
enum: [10, 20, 40, 80]
default: 10
adi,ideal-factor-value:
description:
This property sets the diode ideality factor. The real value must
be multiplied by 1000000 to remove the fractional part. For more
information look at table 20 of the datasheet.
Diode ideality factor.
Set this property to 1000000 times the real value.
$ref: /schemas/types.yaml#/definitions/uint32
default: 0
"^rtd@":
type: object
description:
Represents a rtd sensor which is connected to one of the device channels.
description: RTD sensor.
properties:
reg:
@@ -197,68 +208,82 @@ patternProperties:
maximum: 18
adi,rsense-handle:
description:
Phandle pointing to a rsense object associated with this RTD.
$ref: "/schemas/types.yaml#/definitions/phandle"
description: Associated sense resistor sensor.
$ref: /schemas/types.yaml#/definitions/phandle
adi,number-of-wires:
description:
Identifies the number of wires used by the RTD. Setting this
property to 5 means 4 wires with Kelvin Rsense.
Number of wires used by the RTD.
5 means 4 wires with Kelvin sense resistor.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 3, 4, 5]
default: 2
adi,rsense-share:
description:
Boolean property which enables Rsense sharing, where one sense
resistor is used for multiple 2-, 3-, and/or 4-wire RTDs.
type: boolean
adi,current-rotate:
description:
Boolean property which enables excitation current rotation to
automatically remove parasitic thermocouple effects. Note that
this property is not allowed for 2- and 3-wire RTDs.
Whether to enable sense resistor sharing, where one sense
resistor is used by multiple sensors.
type: boolean
adi,excitation-current-microamp:
description:
This property controls the magnitude of the excitation current
applied to the RTD.
description: Excitation current applied to the RTD.
enum: [5, 10, 25, 50, 100, 250, 500, 1000]
default: 5
adi,rtd-curve:
description:
This property set the RTD curve used and the corresponding
Callendar-VanDusen constants. Look at table 30 of the datasheet.
description: |
RTD curve and the corresponding Callendar-VanDusen constants.
0 - European
1 - American
2 - Japanese
3 - ITS-90
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 0
adi,custom-rtd:
description:
This is a table, where each entry should be a pair of
resistance(ohm)-temperature(K). The entries added here are in uohm
and uK. For more details values look at table 74 and 75.
Used for digitizing custom RTDs.
See Page 62 of the datasheet.
$ref: /schemas/types.yaml#/definitions/uint64-matrix
minItems: 3
maxItems: 64
items:
minItems: 3
maxItems: 64
items:
minItems: 2
maxItems: 2
- description: Resistance point in uOhms.
- description: Temperature point in uK.
required:
- adi,rsense-handle
dependencies:
adi,current-rotate: [ "adi,rsense-share" ]
allOf:
- if:
properties:
adi,number-of-wires:
const: 4
then:
properties:
adi,current-rotate:
description:
Whether to enable excitation current rotation to automatically
remove parasitic thermocouple effects.
type: boolean
dependencies:
adi,current-rotate: [ "adi,rsense-share" ]
- if:
properties:
adi,sensor-type:
const: 18
then:
required:
- adi,custom-rtd
"^thermistor@":
type: object
description:
Represents a thermistor sensor which is connected to one of the device
channels.
description: Thermistor sensor.
properties:
adi,sensor-type:
@@ -277,61 +302,53 @@ patternProperties:
maximum: 27
adi,rsense-handle:
description:
Phandle pointing to a rsense object associated with this
thermistor.
$ref: "/schemas/types.yaml#/definitions/phandle"
description: Associated sense resistor sensor.
$ref: /schemas/types.yaml#/definitions/phandle
adi,single-ended:
description:
Boolean property which set's the thermistor as single-ended.
description: Whether the sensor is single-ended.
type: boolean
adi,rsense-share:
description:
Boolean property which enables Rsense sharing, where one sense
resistor is used for multiple thermistors. Note that this property
is ignored if adi,single-ended is set.
Whether to enable sense resistor sharing, where one sense
resistor is used by multiple sensors.
type: boolean
adi,current-rotate:
description:
Boolean property which enables excitation current rotation to
automatically remove parasitic thermocouple effects.
Whether to enable excitation current rotation to automatically
remove parasitic thermocouple effects.
type: boolean
adi,excitation-current-nanoamp:
description:
This property controls the magnitude of the excitation current
applied to the thermistor. Value 0 set's the sensor in auto-range
mode.
$ref: /schemas/types.yaml#/definitions/uint32
Excitation current applied to the thermistor.
0 sets the sensor in auto-range mode.
enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
500000, 1000000]
default: 0
adi,custom-thermistor:
description:
This is a table, where each entry should be a pair of
resistance(ohm)-temperature(K). The entries added here are in uohm
and uK only for custom thermistors. For more details look at table
78 and 79.
Used for digitizing custom thermistors.
See Page 65 of the datasheet.
$ref: /schemas/types.yaml#/definitions/uint64-matrix
minItems: 3
maxItems: 64
items:
minItems: 2
maxItems: 2
items:
- description: Resistance point in uOhms.
- description: Temperature point in uK.
adi,custom-steinhart:
description:
Steinhart-Hart coefficients are also supported and can
be programmed into the device memory using this property. For
Steinhart sensors the coefficients are given in the raw
format. Look at table 82 for more information.
Steinhart-Hart coefficients in raw format, used for digitizing
custom thermistors.
See Page 68 of the datasheet.
$ref: /schemas/types.yaml#/definitions/uint32-array
items:
minItems: 6
maxItems: 6
minItems: 6
maxItems: 6
required:
- adi,rsense-handle
@@ -339,25 +356,78 @@ patternProperties:
dependencies:
adi,current-rotate: [ "adi,rsense-share" ]
allOf:
- if:
properties:
adi,sensor-type:
const: 26
then:
properties:
adi,excitation-current-nanoamp:
enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
250000, 500000, 1000000]
default: 1000
required:
- adi,custom-steinhart
- if:
properties:
adi,sensor-type:
const: 27
then:
properties:
adi,excitation-current-nanoamp:
enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
250000, 500000, 1000000]
default: 1000
required:
- adi,custom-thermistor
"^adc@":
type: object
description: Represents a channel which is being used as a direct adc.
description: Direct ADC sensor.
properties:
adi,sensor-type:
description: Identifies the sensor as a direct adc.
description: Sensor type for direct ADC sensors.
$ref: /schemas/types.yaml#/definitions/uint32
const: 30
adi,single-ended:
description: Boolean property which set's the adc as single-ended.
description: Whether the sensor is single-ended.
type: boolean
"^temp@":
type: object
description: Active analog temperature sensor.
properties:
adi,sensor-type:
description: Sensor type for active analog temperature sensors.
$ref: /schemas/types.yaml#/definitions/uint32
const: 31
adi,single-ended:
description: Whether the sensor is single-ended.
type: boolean
adi,custom-temp:
description:
Used for digitizing active analog temperature sensors.
See Page 67 of the LTM2985 datasheet.
$ref: /schemas/types.yaml#/definitions/uint64-matrix
minItems: 3
maxItems: 64
items:
items:
- description: Voltage point in nV, signed.
- description: Temperature point in uK.
required:
- adi,custom-temp
"^rsense@":
type: object
description:
Represents a rsense which is connected to one of the device channels.
Rsense are used by thermistors and RTD's.
description: Sense resistor sensor.
properties:
reg:
@@ -365,14 +435,12 @@ patternProperties:
maximum: 20
adi,sensor-type:
description: Identifies the sensor as a rsense.
description: Sensor type sense resistor sensors.
$ref: /schemas/types.yaml#/definitions/uint32
const: 29
adi,rsense-val-milli-ohms:
description:
Sets the value of the sense resistor. Look at table 20 of the
datasheet for information.
description: Value of the sense resistor.
required:
- adi,rsense-val-milli-ohms
@@ -384,6 +452,18 @@ required:
additionalProperties: false
allOf:
- if:
properties:
compatible:
contains:
enum:
- adi,ltc2983
- adi,ltc2984
then:
patternProperties:
"^temp@": false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
@@ -391,7 +471,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
sensor_ltc2983: ltc2983@0 {
temperature-sensor@0 {
compatible = "adi,ltc2983";
reg = <0>;
Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+5
View File
@@ -25,9 +25,14 @@ properties:
- items:
- enum:
- qcom,sc7280-cpu-bwmon
- qcom,sc8280xp-cpu-bwmon
- qcom,sdm845-bwmon
- const: qcom,msm8998-bwmon
- const: qcom,msm8998-bwmon # BWMON v4
- items:
- enum:
- qcom,sc8280xp-llcc-bwmon
- const: qcom,sc7280-llcc-bwmon
- const: qcom,sc7280-llcc-bwmon # BWMON v5
- const: qcom,sdm845-llcc-bwmon # BWMON v5
Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+16 -8
View File
@@ -16,13 +16,21 @@ description:
properties:
compatible:
enum:
- qcom,sc7180-osm-l3
- qcom,sc7280-epss-l3
- qcom,sc8180x-osm-l3
- qcom,sdm845-osm-l3
- qcom,sm8150-osm-l3
- qcom,sm8250-epss-l3
oneOf:
- items:
- enum:
- qcom,sc7180-osm-l3
- qcom,sc8180x-osm-l3
- qcom,sdm845-osm-l3
- qcom,sm8150-osm-l3
- const: qcom,osm-l3
- items:
- enum:
- qcom,sc7280-epss-l3
- qcom,sc8280xp-epss-l3
- qcom,sm8250-epss-l3
- qcom,sm8350-epss-l3
- const: qcom,epss-l3
reg:
maxItems: 1
@@ -56,7 +64,7 @@ examples:
#define RPMH_CXO_CLK 0
osm_l3: interconnect@17d41000 {
compatible = "qcom,sdm845-osm-l3";
compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
reg = <0x17d41000 0x1400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
+1 -1
View File
@@ -79,7 +79,7 @@ patternProperties:
iommus:
minItems: 1
maxItems: 2
maxItems: 3
qcom,nsessions:
$ref: /schemas/types.yaml#/definitions/uint32
Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
+64
View File
@@ -0,0 +1,64 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/nvmem/layouts/kontron,sl28-vpd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVMEM layout of the Kontron SMARC-sAL28 vital product data
maintainers:
- Michael Walle <michael@walle.cc>
description:
The vital product data (VPD) of the sl28 boards contains a serial
number and a base MAC address. The actual MAC addresses for the
on-board ethernet devices are derived from this base MAC address by
adding an offset.
select: false
properties:
compatible:
const: kontron,sl28-vpd
serial-number:
type: object
description: The board's serial number
additionalProperties: false
base-mac-address:
type: object
description:
Base MAC address for all on-module network interfaces. The first
argument of the phandle will be treated as an offset.
properties:
"#nvmem-cell-cells":
const: 1
additionalProperties: false
required:
- compatible
additionalProperties: false
examples:
- |
otp-1 {
compatible = "user-otp";
nvmem-layout {
compatible = "kontron,sl28-vpd";
serial_number: serial-number {
};
base_mac_address: base-mac-address {
#nvmem-cell-cells = <1>;
};
};
};
...
Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
+34
View File
@@ -0,0 +1,34 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/nvmem/layouts/nvmem-layout.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVMEM (Non Volatile Memory) layouts
maintainers:
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
- Michael Walle <michael@walle.cc>
- Miquel Raynal <miquel.raynal@bootlin.com>
description: |
Most NVMEM layouts are static and thus do not require additional description
besides the bytes/bits offset and length. Other layouts can be less statically
define and might require dynamic reading of the NVMEM device in order to
perform their parsing. The nvmem-layout container is here to describe these.
oneOf:
- $ref: kontron,sl28-vpd.yaml
- $ref: onie,tlv-layout.yaml
properties:
compatible: true
'#address-cells': false
'#size-cells': false
required:
- compatible
unevaluatedProperties: false
Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml
+147
View File
@@ -0,0 +1,147 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/nvmem/layouts/onie,tlv-layout.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVMEM layout of the ONIE tlv table
maintainers:
- Miquel Raynal <miquel.raynal@bootlin.com>
description:
Modern networking hardware implementing the Open Compute Project ONIE
infrastructure shall provide a non-volatile memory with a table whose the
content is well specified and gives many information about the manufacturer
(name, country of manufacture, etc) as well as device caracteristics (serial
number, hardware version, mac addresses, etc). The underlaying device type
(flash, EEPROM,...) is not specified. The exact location of each value is also
dynamic and should be discovered at run time because it depends on the
parameters the manufacturer decided to embed.
select: false
properties:
compatible:
const: onie,tlv-layout
product-name:
type: object
additionalProperties: false
part-number:
type: object
additionalProperties: false
serial-number:
type: object
additionalProperties: false
mac-address:
type: object
description:
Base MAC address for all on-module network interfaces. The first
argument of the phandle will be treated as an offset.
properties:
"#nvmem-cell-cells":
const: 1
additionalProperties: false
manufacture-date:
type: object
additionalProperties: false
device-version:
type: object
additionalProperties: false
label-revision:
type: object
additionalProperties: false
platforn-name:
type: object
additionalProperties: false
onie-version:
type: object
additionalProperties: false
num-macs:
type: object
additionalProperties: false
manufacturer:
type: object
additionalProperties: false
country-code:
type: object
additionalProperties: false
vendor:
type: object
additionalProperties: false
diag-version:
type: object
additionalProperties: false
service-tag:
type: object
additionalProperties: false
vendor-extension:
type: object
additionalProperties: false
required:
- compatible
additionalProperties: false
examples:
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
eeprom@56 {
compatible = "atmel,24c64";
read-only;
reg = <0x56>;
nvmem-layout {
compatible = "onie,tlv-layout";
serial-number {
};
};
};
};
- |
spi {
#address-cells = <1>;
#size-cells = <0>;
flash@0 {
compatible = "m25p80", "jedec,spi-nor";
reg = <0>;
otp {
compatible = "user-otp";
nvmem-layout {
compatible = "onie,tlv-layout";
mac-address {
#nvmem-cell-cells = <1>;
};
};
};
};
};
...
Documentation/devicetree/bindings/nvmem/nvmem.yaml
+8
View File
@@ -39,6 +39,13 @@ properties:
when it's driven low (logical '0') to allow writing.
maxItems: 1
nvmem-layout:
$ref: /schemas/nvmem/layouts/nvmem-layout.yaml
description:
Alternative to the statically defined nvmem cells, this
container may reference more advanced (dynamic) layout
parsers.
patternProperties:
"@[0-9a-f]+(,[0-7])?$":
type: object
@@ -67,6 +74,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
qfprom: eeprom@700000 {
compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x00700000 0x100000>;
Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+1
View File
@@ -22,6 +22,7 @@ properties:
compatible:
enum:
- st,stm32f4-otp
- st,stm32mp13-bsec
- st,stm32mp15-bsec
reg:
Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+3
View File
@@ -28,6 +28,9 @@ properties:
items:
- const: phy
power-domains:
maxItems: 1
vbus-supply:
description:
A phandle to the regulator for USB VBUS.
Documentation/devicetree/bindings/serial/ingenic,uart.yaml
+4
View File
@@ -20,6 +20,7 @@ properties:
oneOf:
- enum:
- ingenic,jz4740-uart
- ingenic,jz4750-uart
- ingenic,jz4760-uart
- ingenic,jz4780-uart
- ingenic,x1000-uart
@@ -31,6 +32,9 @@ properties:
- items:
- const: ingenic,jz4725b-uart
- const: ingenic,jz4740-uart
- items:
- const: ingenic,jz4755-uart
- const: ingenic,jz4750-uart
reg:
maxItems: 1
Documentation/devicetree/bindings/serial/renesas,scif.yaml
+1
View File
@@ -67,6 +67,7 @@ properties:
- enum:
- renesas,scif-r8a779a0 # R-Car V3U
- renesas,scif-r8a779f0 # R-Car S4-8
- renesas,scif-r8a779g0 # R-Car V4H
- const: renesas,rcar-gen4-scif # R-Car Gen4
- const: renesas,scif # generic SCIF compatible UART
Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
+1 -2
View File
@@ -67,8 +67,7 @@ allOf:
- if:
properties:
xlnx,use-parity:
contains:
const: 1
const: 1
then:
required:
- xlnx,odd-parity
Documentation/devicetree/bindings/slimbus/bus.txt
-60
View File
@@ -1,60 +0,0 @@
SLIM(Serial Low Power Interchip Media Bus) bus
SLIMbus is a 2-wire bus, and is used to communicate with peripheral
components like audio-codec.
Required property for SLIMbus controller node:
- compatible - name of SLIMbus controller
Child nodes:
Every SLIMbus controller node can contain zero or more child nodes
representing slave devices on the bus. Every SLIMbus slave device is
uniquely determined by the enumeration address containing 4 fields:
Manufacturer ID, Product code, Device index, and Instance value for
the device.
If child node is not present and it is instantiated after device
discovery (slave device reporting itself present).
In some cases it may be necessary to describe non-probeable device
details such as non-standard ways of powering up a device. In
such cases, child nodes for those devices will be present as
slaves of the SLIMbus controller, as detailed below.
Required property for SLIMbus child node if it is present:
- reg - Should be ('Device index', 'Instance ID') from SLIMbus
Enumeration Address.
Device Index Uniquely identifies multiple Devices within
a single Component.
Instance ID Is for the cases where multiple Devices of the
same type or Class are attached to the bus.
- compatible -"slimMID,PID". The textual representation of Manufacturer ID,
Product Code, shall be in lower case hexadecimal with leading
zeroes suppressed
Optional property for SLIMbus child node if it is present:
- slim-ifc-dev - Should be phandle to SLIMBus Interface device.
Required for devices which deal with streams.
SLIMbus example for Qualcomm's slimbus manager component:
slim@28080000 {
compatible = "qcom,apq8064-slim", "qcom,slim";
reg = <0x28080000 0x2000>,
interrupts = <0 33 0>;
clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
clock-names = "iface", "core";
#address-cells = <2>;
#size-cell = <0>;
codec_ifd: ifd@0,0{
compatible = "slim217,60";
reg = <0 0>;
};
codec: wcd9310@1,0{
compatible = "slim217,60";
reg = <1 0>;
slim-ifc-dev = <&codec_ifd>;
};
};
Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml
+120
View File
@@ -0,0 +1,120 @@
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/slimbus/qcom,slim-ngd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description:
SLIMBus NGD controller is a light-weight driver responsible for communicating
with SLIMBus slaves directly over the bus using messaging interface and
communicating with master component residing on ADSP for bandwidth and
data-channel management
properties:
compatible:
enum:
- qcom,slim-ngd-v1.5.0 # for MSM8996
- qcom,slim-ngd-v2.1.0 # for SDM845
reg:
maxItems: 1
"#address-cells":
const: 1
"#size-cells":
const: 0
dmas:
maxItems: 2
dma-names:
items:
- const: rx
- const: tx
interrupts:
maxItems: 1
iommus:
maxItems: 1
patternProperties:
"^slim@[0-9a-f]+$":
type: object
$ref: slimbus.yaml#
description:
Each subnode represents an instance of NGD
properties:
reg:
maxItems: 1
unevaluatedProperties: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- dmas
- dma-names
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
slim-ngd@171c0000 {
compatible = "qcom,slim-ngd-v2.1.0";
reg = <0x171c0000 0x2c000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>;
dma-names = "rx", "tx";
iommus = <&apps_smmu 0x1806 0x0>;
#address-cells = <1>;
#size-cells = <0>;
slim@1 {
reg = <1>;
#address-cells = <2>;
#size-cells = <0>;
codec@1,0 {
compatible = "slim217,250";
reg = <1 0>;
slim-ifc-dev = <&wcd9340_ifd>;
#sound-dai-cells = <1>;
interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
#clock-cells = <0>;
clock-frequency = <9600000>;
clock-output-names = "mclk";
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
#address-cells = <1>;
#size-cells = <1>;
reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
/* Rest of the WCD9340 codec */
};
};
};
Documentation/devicetree/bindings/slimbus/qcom,slim.yaml
+86
View File
@@ -0,0 +1,86 @@
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/slimbus/qcom,slim.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SoC SLIMbus controller
maintainers:
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description:
SLIMbus controller used when applications processor controls SLIMbus master
component.
allOf:
- $ref: slimbus.yaml#
properties:
compatible:
items:
- enum:
- qcom,apq8064-slim
- const: qcom,slim
reg:
items:
- description: Physical address of controller register blocks
- description: SLEW RATE register
reg-names:
items:
- const: ctrl
- const: slew
clocks:
items:
- description: Interface clock for this controller
- description: Interrupt for controller core's BAM
clock-names:
items:
- const: iface
- const: core
interrupts:
maxItems: 1
required:
- compatible
- reg
- reg-names
- clocks
- clock-names
- interrupts
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
slim@28080000 {
compatible = "qcom,apq8064-slim", "qcom,slim";
reg = <0x28080000 0x2000>, <0x80207c 4>;
reg-names = "ctrl", "slew";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
clock-names = "iface", "core";
#address-cells = <2>;
#size-cells = <0>;
audio-codec@1,0 {
compatible = "slim217,60";
reg = <1 0>;
};
};
};
Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
-84
View File
@@ -1,84 +0,0 @@
Qualcomm SLIMBus Non Generic Device (NGD) Controller binding
SLIMBus NGD controller is a light-weight driver responsible for communicating
with SLIMBus slaves directly over the bus using messaging interface and
communicating with master component residing on ADSP for bandwidth and
data-channel management
Please refer to slimbus/bus.txt for details of the common SLIMBus bindings.
- compatible:
Usage: required
Value type: <stringlist>
Definition: must be "qcom,slim-ngd-v<MAJOR>.<MINOR>.<STEP>"
must be one of the following.
"qcom,slim-ngd-v1.5.0" for MSM8996
"qcom,slim-ngd-v2.1.0" for SDM845
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: must specify the base address and size of the controller
register space.
- dmas
Usage: required
Value type: <array of phandles>
Definition: List of rx and tx dma channels
- dma-names
Usage: required
Value type: <stringlist>
Definition: must be "rx" and "tx".
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: must list controller IRQ.
#address-cells
Usage: required
Value type: <u32>
Definition: Should be 1, reflecting the instance id of ngd.
#size-cells
Usage: required
Value type: <u32>
Definition: Should be 0
= NGD Devices
Each subnode represents an instance of NGD, must contain the following
properties:
- reg:
Usage: required
Value type: <u32>
Definition: Should be instance id of ngd.
#address-cells
Usage: required
Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
#size-cells
Usage: required
Refer to slimbus/bus.txt for details of the common SLIMBus bindings.
= EXAMPLE
slim@91c0000 {
compatible = "qcom,slim-ngd-v1.5.0";
reg = <0x91c0000 0x2c000>;
interrupts = <0 163 0>;
dmas = <&slimbam 3>, <&slimbam 4>;
dma-names = "rx", "tx";
#address-cells = <1>;
#size-cells = <0>;
ngd@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <1>;
codec@1 {
compatible = "slim217,1a0";
reg = <1 0>;
};
};
};
Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
-39
View File
@@ -1,39 +0,0 @@
Qualcomm SLIMbus controller
This controller is used if applications processor driver controls SLIMbus
master component.
Required properties:
- #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
- #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
- reg : Offset and length of the register region(s) for the device
- reg-names : Register region name(s) referenced in reg above
Required register resource entries are:
"ctrl": Physical address of controller register blocks
"slew": required for "qcom,apq8064-slim" SOC.
- compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
followed by "qcom,slim" for fallback.
- interrupts : Interrupt number used by this controller
- clocks : Interface and core clocks used by this SLIMbus controller
- clock-names : Required clock-name entries are:
"iface" : Interface clock for this controller
"core" : Interrupt for controller core's BAM
Example:
slim@28080000 {
compatible = "qcom,apq8064-slim", "qcom,slim";
reg = <0x28080000 0x2000>, <0x80207C 4>;
reg-names = "ctrl", "slew";
interrupts = <0 33 0>;
clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
clock-names = "iface", "core";
#address-cells = <2>;
#size-cell = <0>;
wcd9310: audio-codec@1,0{
compatible = "slim217,60";
reg = <1 0>;
};
};
Documentation/devicetree/bindings/slimbus/slimbus.yaml
+95
View File
@@ -0,0 +1,95 @@
# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/slimbus/slimbus.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SLIM (Serial Low Power Interchip Media) bus
maintainers:
- Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
description:
SLIMbus is a 2-wire bus, and is used to communicate with peripheral
components like audio-codec.
properties:
$nodename:
pattern: "^slim(@.*|-[0-9a-f])*$"
"#address-cells":
const: 2
"#size-cells":
const: 0
patternProperties:
"^.*@[0-9a-f]+,[0-9a-f]+$":
type: object
description: |
Every SLIMbus controller node can contain zero or more child nodes
representing slave devices on the bus. Every SLIMbus slave device is
uniquely determined by the enumeration address containing 4 fields::
Manufacturer ID, Product code, Device index, and Instance value for the
device.
If child node is not present and it is instantiated after device
discovery (slave device reporting itself present).
In some cases it may be necessary to describe non-probeable device
details such as non-standard ways of powering up a device. In such cases,
child nodes for those devices will be present as slaves of the SLIMbus
controller.
properties:
compatible:
pattern: "^slim[0-9a-f]+,[0-9a-f]+$"
reg:
maxItems: 1
description: |
Pair of (device index, instande ID), where::
- Device index, which uniquely identifies multiple devices within a
single component.
- Instance ID, can be used for the cases where multiple devices of
the same type or class are attached to the bus.
required:
- compatible
- reg
additionalProperties: true
required:
- "#address-cells"
- "#size-cells"
additionalProperties: true
examples:
- |
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,lcc-msm8960.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
slim@28080000 {
compatible = "qcom,apq8064-slim", "qcom,slim";
reg = <0x28080000 0x2000>, <0x80207c 4>;
reg-names = "ctrl", "slew";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
clock-names = "iface", "core";
#address-cells = <2>;
#size-cells = <0>;
audio-codec@1,0 {
compatible = "slim217,60";
reg = <1 0>;
};
};
};
Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
+10
View File
@@ -85,6 +85,14 @@ properties:
description: >
which of the PMIC Arb provided channels to use for accesses
qcom,bus-id:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 1
description: >
SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond.
Supported values, 0 = primary bus, 1 = secondary bus
required:
- compatible
- reg-names
@@ -113,5 +121,7 @@ examples:
interrupt-controller;
#interrupt-cells = <4>;
qcom,bus-id = <0>;
};
Documentation/devicetree/bindings/usb/dwc2.yaml
+3
View File
@@ -43,7 +43,10 @@ properties:
- const: rockchip,rk3066-usb
- const: snps,dwc2
- const: lantiq,arx100-usb
- const: lantiq,ase-usb
- const: lantiq,danube-usb
- const: lantiq,xrx200-usb
- const: lantiq,xrx300-usb
- items:
- enum:
- amlogic,meson8-usb
Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+48
View File
@@ -0,0 +1,48 @@
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Genesys Logic GL850G USB 2.0 hub controller
maintainers:
- Icenowy Zheng <uwu@icenowy.me>
allOf:
- $ref: usb-device.yaml#
properties:
compatible:
enum:
- usb5e3,608
reg: true
reset-gpios:
description: GPIO controlling the RESET# pin.
vdd-supply:
description:
the regulator that provides 3.3V core power to the hub.
required:
- compatible
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
usb {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
hub: hub@1 {
compatible = "usb5e3,608";
reg = <1>;
reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
};
};
Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+1
View File
@@ -28,6 +28,7 @@ properties:
- mediatek,mt7622-xhci
- mediatek,mt7623-xhci
- mediatek,mt7629-xhci
- mediatek,mt7986-xhci
- mediatek,mt8173-xhci
- mediatek,mt8183-xhci
- mediatek,mt8186-xhci
Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+1
View File
@@ -24,6 +24,7 @@ properties:
- mediatek,mt2712-mtu3
- mediatek,mt8173-mtu3
- mediatek,mt8183-mtu3
- mediatek,mt8186-mtu3
- mediatek,mt8188-mtu3
- mediatek,mt8192-mtu3
- mediatek,mt8195-mtu3
Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+3
View File
@@ -39,6 +39,7 @@ properties:
- qcom,sm8250-dwc3
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
- const: qcom,dwc3
reg:
@@ -301,6 +302,7 @@ allOf:
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
then:
properties:
clocks:
@@ -358,6 +360,7 @@ allOf:
- qcom,sm8250-dwc3
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
then:
properties:
interrupts:
Documentation/devicetree/bindings/usb/usb-drd.yaml
+1
View File
@@ -27,6 +27,7 @@ properties:
should default to OTG.
$ref: /schemas/types.yaml#/definitions/string
enum: [host, peripheral, otg]
default: otg
hnp-disable:
description:
Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml
+5
View File
@@ -39,6 +39,11 @@ properties:
the VBus line.
$ref: /schemas/types.yaml#/definitions/phandle
wakeup-source:
description:
Specify if the USB phy can detect the remote wakeup signal
while the system sleep.
required:
- compatible
- '#phy-cells'
Documentation/devicetree/bindings/usb/usb251xb.txt
-89
View File
@@ -1,89 +0,0 @@
Microchip USB 2.0 Hi-Speed Hub Controller
The device node for the configuration of a Microchip USB251x/xBi USB 2.0
Hi-Speed Controller.
Required properties :
- compatible : Should be "microchip,usb251xb" or one of the specific types:
"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi",
"microchip,usb2517", "microchip,usb2517i", "microchip,usb2422"
- reg : I2C address on the selected bus (default is <0x2C>)
Optional properties :
- reset-gpios : Should specify the gpio for hub reset
- vdd-supply : Should specify the phandle to the regulator supplying vdd
- skip-config : Skip Hub configuration, but only send the USB-Attach command
- vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
- product-id : Set USB Product ID of the hub (16 bit, default depends on type)
- device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
- language-id : Set USB Language ID (16 bit, default is 0x0000)
- manufacturer : Set USB Manufacturer string (max 31 characters long)
- product : Set USB Product string (max 31 characters long)
- serial : Set USB Serial string (max 31 characters long)
- {bus,self}-powered : selects between self- and bus-powered operation
(boolean, default is self-powered)
- disable-hi-speed : disable USB Hi-Speed support (boolean)
- {multi,single}-tt : selects between multi- and single-transaction-translator
(boolean, default is multi-tt)
- disable-eop : disable End of Packet generation in full-speed mode (boolean)
- {ganged,individual}-sensing : select over-current sense type in self-powered
mode (boolean, default is individual)
- {ganged,individual}-port-switching : select port power switching mode
(boolean, default is individual)
- dynamic-power-switching : enable auto-switching from self- to bus-powered
operation if the local power source is removed or unavailable (boolean)
- oc-delay-us : Delay time (in microseconds) for filtering the over-current
sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
an invalid value is given, the default is used instead.
- compound-device : indicate the hub is part of a compound device (boolean)
- port-mapping-mode : enable port mapping mode (boolean)
- led-{usb,speed}-mode : led usb/speed indication mode selection
(boolean, default is speed mode)
- string-support : enable string descriptor support (required for manufacturer,
product and serial string configuration)
- non-removable-ports : Should specify the ports which have a non-removable
device connected.
- sp-disabled-ports : Specifies the ports which will be self-power disabled
- bp-disabled-ports : Specifies the ports which will be bus-power disabled
- sp-max-total-current-microamp: Specifies max current consumed by the hub
from VBUS when operating in self-powered hub. It includes the hub
silicon along with all associated circuitry including a permanently
attached peripheral (range: 0 - 100000 uA, default 1000 uA)
- bp-max-total-current-microamp: Specifies max current consumed by the hub
from VBUS when operating in self-powered hub. It includes the hub
silicon along with all associated circuitry including a permanently
attached peripheral (range: 0 - 510000 uA, default 100000 uA)
- sp-max-removable-current-microamp: Specifies max current consumed by the hub
from VBUS when operating in self-powered hub. It includes the hub
silicon along with all associated circuitry excluding a permanently
attached peripheral (range: 0 - 100000 uA, default 1000 uA)
- bp-max-removable-current-microamp: Specifies max current consumed by the hub
from VBUS when operating in self-powered hub. It includes the hub
silicon along with all associated circuitry excluding a permanently
attached peripheral (range: 0 - 510000 uA, default 100000 uA)
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
- swap-dx-lanes : Specifies the ports which will swap the differential-pair
(D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
compatible = "microchip,usb2512b";
reg = <0x2c>;
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
usb2514b@2c {
compatible = "microchip,usb2514b";
reg = <0x2c>;
vendor-id = /bits/ 16 <0x0000>;
product-id = /bits/ 16 <0x0000>;
string-support;
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
/* correct misplaced usb connectors on port 1,2 */
swap-dx-lanes = <1 2>;
};
Documentation/devicetree/bindings/usb/usb251xb.yaml
+271
View File
@@ -0,0 +1,271 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/usb251xb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Microchip USB 2.0 Hi-Speed Hub Controller
maintainers:
- Richard Leitner <richard.leitner@skidata.com>
properties:
compatible:
enum:
- microchip,usb2422
- microchip,usb2512b
- microchip,usb2512bi
- microchip,usb2513b
- microchip,usb2513bi
- microchip,usb2514b
- microchip,usb2514bi
- microchip,usb2517
- microchip,usb2517i
- microchip,usb251xb
reg:
maxItems: 1
reset-gpios:
description: |
Should specify the gpio for hub reset
vdd-supply:
description: |
Should specify the phandle to the regulator supplying vdd
skip-config:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Skip Hub configuration, but only send the USB-Attach command
vendor-id:
$ref: /schemas/types.yaml#/definitions/uint16
default: 0x0424
description: |
Set USB Vendor ID of the hub
product-id:
$ref: /schemas/types.yaml#/definitions/uint16
description: |
Set USB Product ID of the hub
device-id:
$ref: /schemas/types.yaml#/definitions/uint16
default: 0x0bb3
description: |
Set USB Device ID of the hub
language-id:
$ref: /schemas/types.yaml#/definitions/uint16
default: 0x0000
description: |
Set USB Language ID
manufacturer:
$ref: /schemas/types.yaml#/definitions/string
description: |
Set USB Manufacturer string (max 31 characters long)
product:
$ref: /schemas/types.yaml#/definitions/string
description: |
Set USB Product string (max 31 characters long)
serial:
$ref: /schemas/types.yaml#/definitions/string
description: |
Set USB Serial string (max 31 characters long)
bus-powered:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between self- and bus-powered operation
(boolean, default is self-powered)
self-powered:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between self- and bus-powered operation
(boolean, default is self-powered)
disable-hi-speed:
$ref: /schemas/types.yaml#/definitions/flag
description: |
disable USB Hi-Speed support (boolean)
multi-tt:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between multi- and single-transaction-translator
(boolean, default is multi-tt)
single-tt:
$ref: /schemas/types.yaml#/definitions/flag
description: |
selects between multi- and single-transaction-translator
(boolean, default is multi-tt)
disable-eop:
$ref: /schemas/types.yaml#/definitions/flag
description: |
disable End of Packet generation in full-speed mode (boolean)
ganged-sensing:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select over-current sense type in self-powered mode
(boolean, default is individual)
individual-sensing:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select over-current sense type in self-powered mode
(boolean, default is individual)
ganged-port-switching:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select port power switching mode (boolean, default is individual)
individual-port-switching:
$ref: /schemas/types.yaml#/definitions/flag
description: |
select port power switching mode (boolean, default is individual)
dynamic-power-switching:
$ref: /schemas/types.yaml#/definitions/flag
description: |
enable auto-switching from self- to bus-powered operation if the
local power source is removed or unavailable (boolean)
oc-delay-us:
enum: [100, 4000, 8000, 16000]
default: 8000
description: |
Delay time (in microseconds) for filtering the over-current sense
inputs. If an invalid value is given, the default is used instead.
compound-device:
$ref: /schemas/types.yaml#/definitions/flag
description: |
indicate the hub is part of a compound device (boolean)
port-mapping-mode:
$ref: /schemas/types.yaml#/definitions/flag
description: |
enable port mapping mode (boolean)
led-usb-mode:
$ref: /schemas/types.yaml#/definitions/flag
description: |
led usb/speed indication mode selection (boolean, default is speed mode)
led-speed-mode:
$ref: /schemas/types.yaml#/definitions/flag
description: |
led usb/speed indication mode selection (boolean, default is speed mode)
string-support:
$ref: /schemas/types.yaml#/definitions/flag
description: |
enable string descriptor support (required for manufacturer, product
and serial string configuration)
non-removable-ports:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Should specify the ports which have a non-removable device connected.
sp-disabled-ports:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Specifies the ports which will be self-power disabled
bp-disabled-ports:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Specifies the ports which will be bus-power disabled
sp-max-total-current-microamp:
maximum: 100000
default: 1000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry including a permanently
attached peripheral.
bp-max-total-current-microamp:
maximum: 510000
default: 100000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry including a permanently
attached peripheral.
sp-max-removable-current-microamp:
maximum: 100000
default: 1000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry excluding a permanently
attached peripheral.
bp-max-removable-current-microamp:
maximum: 510000
default: 100000
description: |
Specifies max current consumed by the hub from VBUS when
operating in self-powered hub. It includes the hub silicon
along with all associated circuitry excluding a permanently
attached peripheral.
power-on-time-ms:
maximum: 510
default: 100
description: |
Specifies the time it takes from the time the host initiates the
power-on sequence to a port until the port has adequate power.
swap-dx-lanes:
$ref: /schemas/types.yaml#/definitions/uint8-array
description: |
Specifies the ports which will swap the differential-pair (D+/D-),
default is not-swapped.
additionalProperties: false
required:
- compatible
- reg
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
usb-hub@2c {
compatible = "microchip,usb2512b";
reg = <0x2c>;
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
usb-hub@2d {
compatible = "microchip,usb2514b";
reg = <0x2d>;
vendor-id = /bits/ 16 <0x0000>;
product-id = /bits/ 16 <0x0000>;
string-support;
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
/* correct misplaced usb connectors on port 1,2 */
swap-dx-lanes = <1 2>;
};
};
Documentation/devicetree/bindings/vendor-prefixes.yaml
+4
View File
@@ -494,6 +494,8 @@ patternProperties:
description: GE Fanuc Intelligent Platforms Embedded Systems, Inc.
"^gemei,.*":
description: Gemei Digital Technology Co., Ltd.
"^genesys,.*":
description: Genesys Logic, Inc.
"^geniatech,.*":
description: Geniatech, Inc.
"^giantec,.*":
@@ -941,6 +943,8 @@ patternProperties:
description: One Laptop Per Child
"^oneplus,.*":
description: OnePlus Technology (Shenzhen) Co., Ltd.
"^onie,.*":
description: Open Network Install Environment group
"^onion,.*":
description: Onion Corporation
"^onnn,.*":
Documentation/driver-api/driver-model/devres.rst
+3
View File
@@ -365,6 +365,7 @@ MEM
devm_kmemdup()
devm_krealloc()
devm_kstrdup()
devm_kstrdup_const()
devm_kvasprintf()
devm_kzalloc()
@@ -395,6 +396,8 @@ PCI
PHY
devm_usb_get_phy()
devm_usb_get_phy_by_node()
devm_usb_get_phy_by_phandle()
devm_usb_put_phy()
PINCTRL
Documentation/driver-api/serial/driver.rst
+3
View File
@@ -78,6 +78,9 @@ Other functions
uart_get_lsr_info uart_handle_dcd_change uart_handle_cts_change
uart_try_toggle_sysrq uart_get_console
.. kernel-doc:: include/linux/serial_core.h
:identifiers: uart_port_tx_limited uart_port_tx
Other notes
-----------
Documentation/driver-api/serial/serial-rs485.rst
+30 -26
View File
@@ -29,23 +29,28 @@ RS485 Serial Communications
3. Data Structures Already Available in the Kernel
==================================================
The Linux kernel provides the serial_rs485 structure (see [1]) to handle
RS485 communications. This data structure is used to set and configure RS485
The Linux kernel provides the struct serial_rs485 to handle RS485
communications. This data structure is used to set and configure RS485
parameters in the platform data and in ioctls.
The device tree can also provide RS485 boot time parameters (see [2]
for bindings). The driver is in charge of filling this data structure from
the values given by the device tree.
The device tree can also provide RS485 boot time parameters
[#DT-bindings]_. The serial core fills the struct serial_rs485 from the
values given by the device tree when the driver calls
uart_get_rs485_mode().
Any driver for devices capable of working both as RS232 and RS485 should
implement the rs485_config callback and provide rs485_supported in the
uart_port structure. The serial core calls rs485_config to do the device
specific part in response to TIOCSRS485 ioctl (see below). The rs485_config
callback receives a pointer to a sanitizated serial_rs485 structure. The
serial_rs485 userspace provides is sanitized before calling rs485_config
using rs485_supported that indicates what RS485 features the driver supports
for the uart_port. TIOCGRS485 ioctl can be used to read back the
serial_rs485 structure matching to the current configuration.
implement the ``rs485_config`` callback and provide ``rs485_supported``
in the ``struct uart_port``. The serial core calls ``rs485_config`` to do
the device specific part in response to TIOCSRS485 ioctl (see below). The
``rs485_config`` callback receives a pointer to a sanitizated struct
serial_rs485. The struct serial_rs485 userspace provides is sanitized
before calling ``rs485_config`` using ``rs485_supported`` that indicates
what RS485 features the driver supports for the ``struct uart_port``.
TIOCGRS485 ioctl can be used to read back the struct serial_rs485
matching to the current configuration.
.. kernel-doc:: include/uapi/linux/serial.h
:identifiers: serial_rs485 uart_get_rs485_mode
4. Usage from user-level
========================
@@ -103,29 +108,28 @@ RS485 Serial Communications
========================
The Linux kernel provides addressing mode for multipoint RS-485 serial
communications line. The addressing mode is enabled with SER_RS485_ADDRB
flag in serial_rs485. Struct serial_rs485 has two additional flags and
fields for enabling receive and destination addresses.
communications line. The addressing mode is enabled with
``SER_RS485_ADDRB`` flag in struct serial_rs485. The struct serial_rs485
has two additional flags and fields for enabling receive and destination
addresses.
Address mode flags:
- SER_RS485_ADDRB: Enabled addressing mode (sets also ADDRB in termios).
- SER_RS485_ADDR_RECV: Receive (filter) address enabled.
- SER_RS485_ADDR_DEST: Set destination address.
- ``SER_RS485_ADDRB``: Enabled addressing mode (sets also ADDRB in termios).
- ``SER_RS485_ADDR_RECV``: Receive (filter) address enabled.
- ``SER_RS485_ADDR_DEST``: Set destination address.
Address fields (enabled with corresponding SER_RS485_ADDR_* flag):
- addr_recv: Receive address.
- addr_dest: Destination address.
Address fields (enabled with corresponding ``SER_RS485_ADDR_*`` flag):
- ``addr_recv``: Receive address.
- ``addr_dest``: Destination address.
Once a receive address is set, the communication can occur only with the
particular device and other peers are filtered out. It is left up to the
receiver side to enforce the filtering. Receive address will be cleared
if SER_RS485_ADDR_RECV is not set.
if ``SER_RS485_ADDR_RECV`` is not set.
Note: not all devices supporting RS485 support multipoint addressing.
6. References
=============
[1] include/uapi/linux/serial.h
[2] Documentation/devicetree/bindings/serial/rs485.txt
.. [#DT-bindings] Documentation/devicetree/bindings/serial/rs485.txt
MAINTAINERS
+45 -4
View File
@@ -1152,6 +1152,15 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
F: drivers/net/amt.c
ANALOG DEVICES INC AD4130 DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
F: Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
F: drivers/iio/adc/ad4130.c
ANALOG DEVICES INC AD7192 DRIVER
M: Alexandru Tachici <alexandru.tachici@analog.com>
L: linux-iio@vger.kernel.org
@@ -1201,6 +1210,14 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
F: drivers/iio/adc/ad7780.c
ANALOG DEVICES INC AD74115 DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
F: drivers/iio/addac/ad74115.c
ANALOG DEVICES INC AD74413R DRIVER
M: Cosmin Tanislav <cosmin.tanislav@analog.com>
L: linux-iio@vger.kernel.org
@@ -1224,6 +1241,14 @@ W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
F: drivers/iio/amplifiers/ada4250.c
ANALOG DEVICES INC ADF4377 DRIVER
M: Antoniu Miclaus <antoniu.miclaus@analog.com>
L: linux-iio@vger.kernel.org
S: Supported
W: https://ez.analog.com/linux-software-drivers
F: Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
F: drivers/iio/frequency/adf4377.c
ANALOG DEVICES INC ADGS1408 DRIVER
M: Mircea Caprioru <mircea.caprioru@analog.com>
S: Supported
@@ -7935,6 +7960,12 @@ F: fs/notify/fanotify/
F: include/linux/fanotify.h
F: include/uapi/linux/fanotify.h
FARADAY FOTG210 USB2 DUAL-ROLE CONTROLLER
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: drivers/usb/fotg210/
FARSYNC SYNCHRONOUS DRIVER
M: Kevin Curtis <kevin.curtis@farsite.co.uk>
S: Supported
@@ -11579,6 +11610,12 @@ F: drivers/mfd/khadas-mcu.c
F: include/linux/mfd/khadas-mcu.h
F: drivers/thermal/khadas_mcu_fan.c
KIONIX/ROHM KX022A ACCELEROMETER
M: Matti Vaittinen <mazziesaccount@gmail.com>
L: linux-iio@vger.kernel.org
S: Supported
F: drivers/iio/accel/kionix-kx022a*
KMEMLEAK
M: Catalin Marinas <catalin.marinas@arm.com>
S: Maintained
@@ -12658,6 +12695,12 @@ S: Maintained
F: Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
F: drivers/regulator/max20086-regulator.c
MAXIM MAX30208 TEMPERATURE SENSOR DRIVER
M: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/iio/temperature/max30208.c
MAXIM MAX77650 PMIC MFD DRIVER
M: Bartosz Golaszewski <brgl@bgdev.pl>
L: linux-kernel@vger.kernel.org
@@ -13567,7 +13610,6 @@ F: arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
MHI BUS
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
R: Hemant Kumar <quic_hemantk@quicinc.com>
L: mhi@lists.linux.dev
L: linux-arm-msm@vger.kernel.org
S: Maintained
@@ -13802,7 +13844,7 @@ MICROCHIP USB251XB DRIVER
M: Richard Leitner <richard.leitner@skidata.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/usb/usb251xb.txt
F: Documentation/devicetree/bindings/usb/usb251xb.yaml
F: drivers/usb/misc/usb251xb.c
MICROCHIP USBA UDC DRIVER
@@ -14744,10 +14786,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
F: arch/nios2/
NITRO ENCLAVES (NE)
M: Andra Paraschiv <andraprs@amazon.com>
M: Alexandru Vasile <lexnv@amazon.com>
M: Alexandru Ciobotaru <alcioa@amazon.com>
L: linux-kernel@vger.kernel.org
L: The AWS Nitro Enclaves Team <aws-nitro-enclaves-devel@amazon.com>
S: Supported
W: https://aws.amazon.com/ec2/nitro/nitro-enclaves/
F: Documentation/virt/ne_overview.rst
arch/mips/include/asm/octeon/cvmx.h
+2 -2
View File
@@ -154,13 +154,13 @@ static inline uint64_t cvmx_build_bits(uint64_t high_bit,
/**
* Convert a memory pointer (void*) into a hardware compatible
* memory address (uint64_t). Octeon hardware widgets don't
* memory address (phys_addr_t). Octeon hardware widgets don't
* understand logical addresses.
*
* @ptr: C style memory pointer
* Returns Hardware physical address
*/
static inline uint64_t cvmx_ptr_to_phys(void *ptr)
static inline phys_addr_t cvmx_ptr_to_phys(void *ptr)
{
if (sizeof(void *) == 8) {
/*
arch/powerpc/configs/ppc6xx_defconfig
-1
View File
@@ -911,7 +911,6 @@ CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
arch/powerpc/platforms/book3s/vas-api.c
+1 -1
View File
@@ -53,7 +53,7 @@ struct coproc_instance {
struct vas_window *txwin;
};
static char *coproc_devnode(struct device *dev, umode_t *mode)
static char *coproc_devnode(const struct device *dev, umode_t *mode)
{
return kasprintf(GFP_KERNEL, "crypto/%s", dev_name(dev));
}
arch/sh/configs/landisk_defconfig
-1
View File
@@ -92,7 +92,6 @@ CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
arch/x86/kernel/cpu/resctrl/pseudo_lock.c
+2 -2
View File
@@ -1560,9 +1560,9 @@ static const struct file_operations pseudo_lock_dev_fops = {
.mmap = pseudo_lock_dev_mmap,
};
static char *pseudo_lock_devnode(struct device *dev, umode_t *mode)
static char *pseudo_lock_devnode(const struct device *dev, umode_t *mode)
{
struct rdtgroup *rdtgrp;
const struct rdtgroup *rdtgrp;
rdtgrp = dev_get_drvdata(dev);
if (mode)
arch/x86/kernel/cpuid.c
+1 -1
View File
@@ -139,7 +139,7 @@ static int cpuid_device_destroy(unsigned int cpu)
return 0;
}
static char *cpuid_devnode(struct device *dev, umode_t *mode)
static char *cpuid_devnode(const struct device *dev, umode_t *mode)
{
return kasprintf(GFP_KERNEL, "cpu/%u/cpuid", MINOR(dev->devt));
}
arch/x86/kernel/msr.c
+1 -1
View File
@@ -250,7 +250,7 @@ static int msr_device_destroy(unsigned int cpu)
return 0;
}
static char *msr_devnode(struct device *dev, umode_t *mode)
static char *msr_devnode(const struct device *dev, umode_t *mode)
{
return kasprintf(GFP_KERNEL, "cpu/%u/msr", MINOR(dev->devt));
}
block/bsg.c
+1 -1
View File
@@ -235,7 +235,7 @@ out_put_device:
}
EXPORT_SYMBOL_GPL(bsg_register_queue);
static char *bsg_devnode(struct device *dev, umode_t *mode)
static char *bsg_devnode(const struct device *dev, umode_t *mode)
{
return kasprintf(GFP_KERNEL, "bsg/%s", dev_name(dev));
}
block/genhd.c
+2 -2
View File
@@ -1189,9 +1189,9 @@ static void disk_release(struct device *dev)
iput(disk->part0->bd_inode); /* frees the disk */
}
static int block_uevent(struct device *dev, struct kobj_uevent_env *env)
static int block_uevent(const struct device *dev, struct kobj_uevent_env *env)
{
struct gendisk *disk = dev_to_disk(dev);
const struct gendisk *disk = dev_to_disk(dev);
return add_uevent_var(env, "DISKSEQ=%llu", disk->diskseq);
}
drivers/accessibility/speakup/Makefile
+3 -1
View File
@@ -40,7 +40,9 @@ hostprogs += makemapdata
makemapdata-objs := makemapdata.o
quiet_cmd_mkmap = MKMAP $@
cmd_mkmap = TOPDIR=$(srctree) $(obj)/makemapdata > $@
cmd_mkmap = TOPDIR=$(srctree) \
SPKDIR=$(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD),$(srctree)/drivers/accessibility/speakup) \
$(obj)/makemapdata > $@
$(obj)/mapdata.h: $(obj)/makemapdata
$(call cmd,mkmap)
drivers/accessibility/speakup/kobjects.c
+3
View File
@@ -914,6 +914,8 @@ static struct kobj_attribute say_word_ctl_attribute =
__ATTR(say_word_ctl, 0644, spk_var_show, spk_var_store);
static struct kobj_attribute spell_delay_attribute =
__ATTR(spell_delay, 0644, spk_var_show, spk_var_store);
static struct kobj_attribute cur_phonetic_attribute =
__ATTR(cur_phonetic, 0644, spk_var_show, spk_var_store);
/*
* These attributes are i18n related.
@@ -967,6 +969,7 @@ static struct attribute *main_attrs[] = {
&say_control_attribute.attr,
&say_word_ctl_attribute.attr,
&spell_delay_attribute.attr,
&cur_phonetic_attribute.attr,
NULL,
};
drivers/accessibility/speakup/main.c
+57 -15
View File
@@ -65,6 +65,7 @@ int spk_key_echo, spk_say_word_ctl;
int spk_say_ctrl, spk_bell_pos;
short spk_punc_mask;
int spk_punc_level, spk_reading_punc;
int spk_cur_phonetic;
char spk_str_caps_start[MAXVARLEN + 1] = "\0";
char spk_str_caps_stop[MAXVARLEN + 1] = "\0";
char spk_str_pause[MAXVARLEN + 1] = "\0";
@@ -1268,20 +1269,29 @@ int spk_set_key_info(const u_char *key_info, u_char *k_buffer)
return 0;
}
static struct var_t spk_vars[] = {
enum spk_vars_id {
BELL_POS_ID = 0, SPELL_DELAY_ID, ATTRIB_BLEEP_ID,
BLEEPS_ID, BLEEP_TIME_ID, PUNC_LEVEL_ID,
READING_PUNC_ID, CURSOR_TIME_ID, SAY_CONTROL_ID,
SAY_WORD_CTL_ID, NO_INTERRUPT_ID, KEY_ECHO_ID,
CUR_PHONETIC_ID, V_LAST_VAR_ID, NB_ID
};
static struct var_t spk_vars[NB_ID] = {
/* bell must be first to set high limit */
{BELL_POS, .u.n = {NULL, 0, 0, 0, 0, 0, NULL} },
{SPELL_DELAY, .u.n = {NULL, 0, 0, 4, 0, 0, NULL} },
{ATTRIB_BLEEP, .u.n = {NULL, 1, 0, 3, 0, 0, NULL} },
{BLEEPS, .u.n = {NULL, 3, 0, 3, 0, 0, NULL} },
{BLEEP_TIME, .u.n = {NULL, 30, 1, 200, 0, 0, NULL} },
{PUNC_LEVEL, .u.n = {NULL, 1, 0, 4, 0, 0, NULL} },
{READING_PUNC, .u.n = {NULL, 1, 0, 4, 0, 0, NULL} },
{CURSOR_TIME, .u.n = {NULL, 120, 50, 600, 0, 0, NULL} },
{SAY_CONTROL, TOGGLE_0},
{SAY_WORD_CTL, TOGGLE_0},
{NO_INTERRUPT, TOGGLE_0},
{KEY_ECHO, .u.n = {NULL, 1, 0, 2, 0, 0, NULL} },
[BELL_POS_ID] = { BELL_POS, .u.n = {NULL, 0, 0, 0, 0, 0, NULL} },
[SPELL_DELAY_ID] = { SPELL_DELAY, .u.n = {NULL, 0, 0, 4, 0, 0, NULL} },
[ATTRIB_BLEEP_ID] = { ATTRIB_BLEEP, .u.n = {NULL, 1, 0, 3, 0, 0, NULL} },
[BLEEPS_ID] = { BLEEPS, .u.n = {NULL, 3, 0, 3, 0, 0, NULL} },
[BLEEP_TIME_ID] = { BLEEP_TIME, .u.n = {NULL, 30, 1, 200, 0, 0, NULL} },
[PUNC_LEVEL_ID] = { PUNC_LEVEL, .u.n = {NULL, 1, 0, 4, 0, 0, NULL} },
[READING_PUNC_ID] = { READING_PUNC, .u.n = {NULL, 1, 0, 4, 0, 0, NULL} },
[CURSOR_TIME_ID] = { CURSOR_TIME, .u.n = {NULL, 120, 50, 600, 0, 0, NULL} },
[SAY_CONTROL_ID] { SAY_CONTROL, TOGGLE_0},
[SAY_WORD_CTL_ID] = {SAY_WORD_CTL, TOGGLE_0},
[NO_INTERRUPT_ID] = { NO_INTERRUPT, TOGGLE_0},
[KEY_ECHO_ID] = { KEY_ECHO, .u.n = {NULL, 1, 0, 2, 0, 0, NULL} },
[CUR_PHONETIC_ID] = { CUR_PHONETIC, .u.n = {NULL, 0, 0, 1, 0, 0, NULL} },
V_LAST_VAR
};
@@ -1712,8 +1722,12 @@ static void cursor_done(struct timer_list *unused)
speakup_win_say(vc);
else if (is_cursor == 1 || is_cursor == 4)
say_line_from_to(vc, 0, vc->vc_cols, 0);
else
say_char(vc);
else {
if (spk_cur_phonetic == 1)
say_phonetic_char(vc);
else
say_char(vc);
}
spk_keydown = 0;
is_cursor = 0;
out:
@@ -2453,5 +2467,33 @@ out:
return err;
}
module_param_named(bell_pos, spk_vars[BELL_POS_ID].u.n.default_val, int, 0444);
module_param_named(spell_delay, spk_vars[SPELL_DELAY_ID].u.n.default_val, int, 0444);
module_param_named(attrib_bleep, spk_vars[ATTRIB_BLEEP_ID].u.n.default_val, int, 0444);
module_param_named(bleeps, spk_vars[BLEEPS_ID].u.n.default_val, int, 0444);
module_param_named(bleep_time, spk_vars[BLEEP_TIME_ID].u.n.default_val, int, 0444);
module_param_named(punc_level, spk_vars[PUNC_LEVEL_ID].u.n.default_val, int, 0444);
module_param_named(reading_punc, spk_vars[READING_PUNC_ID].u.n.default_val, int, 0444);
module_param_named(cursor_time, spk_vars[CURSOR_TIME_ID].u.n.default_val, int, 0444);
module_param_named(say_control, spk_vars[SAY_CONTROL_ID].u.n.default_val, int, 0444);
module_param_named(say_word_ctl, spk_vars[SAY_WORD_CTL_ID].u.n.default_val, int, 0444);
module_param_named(no_interrupt, spk_vars[NO_INTERRUPT_ID].u.n.default_val, int, 0444);
module_param_named(key_echo, spk_vars[KEY_ECHO_ID].u.n.default_val, int, 0444);
module_param_named(cur_phonetic, spk_vars[CUR_PHONETIC_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(bell_pos, "This works much like a typewriter bell. If for example 72 is echoed to bell_pos, it will beep the PC speaker when typing on a line past character 72.");
MODULE_PARM_DESC(spell_delay, "This controls how fast a word is spelled when speakup's spell word review command is pressed.");
MODULE_PARM_DESC(attrib_bleep, "Beeps the PC speaker when there is an attribute change such as background color when using speakup review commands. One = on, zero = off.");
MODULE_PARM_DESC(bleeps, "This controls whether one hears beeps through the PC speaker when using speakup review commands.");
MODULE_PARM_DESC(bleep_time, "This controls the duration of the PC speaker beeps speakup produces.");
MODULE_PARM_DESC(punc_level, "Controls the level of punctuation spoken as the screen is displayed, not reviewed.");
MODULE_PARM_DESC(reading_punc, "It controls the level of punctuation when reviewing the screen with speakup's screen review commands.");
MODULE_PARM_DESC(cursor_time, "This controls cursor delay when using arrow keys.");
MODULE_PARM_DESC(say_control, "This controls if speakup speaks shift, alt and control when those keys are pressed or not.");
MODULE_PARM_DESC(say_word_ctl, "Sets thw say_word_ctl on load.");
MODULE_PARM_DESC(no_interrupt, "Controls if typing interrupts output from speakup.");
MODULE_PARM_DESC(key_echo, "Controls if speakup speaks keys when they are typed. One = on zero = off or don't echo keys.");
MODULE_PARM_DESC(cur_phonetic, "Controls if speakup speaks letters phonetically during navigation. One = on zero = off or don't speak phonetically.");
module_init(speakup_init);
module_exit(speakup_exit);
drivers/accessibility/speakup/makemapdata.c
+5 -2
View File
@@ -51,12 +51,15 @@ main(int argc, char *argv[])
{
int value, i;
struct st_key *this;
const char *dir_name;
const char *dir_name, *spk_dir_name;
char *cp;
dir_name = getenv("TOPDIR");
if (!dir_name)
dir_name = ".";
spk_dir_name = getenv("SPKDIR");
if (!spk_dir_name)
spk_dir_name = "drivers/accessibility/speakup";
bzero(key_table, sizeof(key_table));
add_key("shift", 1, is_shift);
add_key("altgr", 2, is_shift);
@@ -83,7 +86,7 @@ main(int argc, char *argv[])
add_key(def_name, value, is_input);
}
open_input(dir_name, "drivers/accessibility/speakup/spk_priv_keyinfo.h");
open_input(spk_dir_name, "spk_priv_keyinfo.h");
while (get_define()) {
if (strlen(def_val) > 5) {
//if (def_val[0] == '(')
drivers/accessibility/speakup/speakup.h
+1
View File
@@ -105,6 +105,7 @@ extern int spk_no_intr, spk_say_ctrl, spk_say_word_ctl, spk_punc_level;
extern int spk_reading_punc, spk_attrib_bleep, spk_bleeps;
extern int spk_bleep_time, spk_bell_pos;
extern int spk_spell_delay, spk_key_echo;
extern int spk_cur_phonetic;
extern short spk_punc_mask;
extern short spk_pitch_shift, synth_flags;
extern bool spk_quiet_boot;
drivers/accessibility/speakup/speakup_acntpc.c
+30 -8
View File
@@ -34,14 +34,23 @@ static int synth_port_control;
static int port_forced;
static unsigned int synth_portlist[] = { 0x2a8, 0 };
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\033P8" } },
{ CAPS_STOP, .u.s = {"\033P5" } },
{ RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
{ PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
{ VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
{ TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID,
VOL_ID, TONE_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
[RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
[PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
[TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -305,9 +314,22 @@ static void accent_release(struct spk_synth *synth)
module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_acntpc.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(tone, "Set the tone variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_acntpc);
drivers/accessibility/speakup/speakup_acntsa.c
+29 -8
View File
@@ -19,14 +19,24 @@
static int synth_probe(struct spk_synth *synth);
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\033P8" } },
{ CAPS_STOP, .u.s = {"\033P5" } },
{ RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
{ PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
{ VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
{ TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID,
VOL_ID, TONE_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
[RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
[PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
[TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -129,10 +139,21 @@ static int synth_probe(struct spk_synth *synth)
module_param_named(ser, synth_acntsa.ser, int, 0444);
module_param_named(dev, synth_acntsa.dev_name, charp, 0444);
module_param_named(start, synth_acntsa.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(tone, "Set the tone variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_acntsa);
drivers/accessibility/speakup/speakup_apollo.c
+37 -9
View File
@@ -24,15 +24,28 @@
static void do_catch_up(struct spk_synth *synth);
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"cap, " } },
{ CAPS_STOP, .u.s = {"" } },
{ RATE, .u.n = {"@W%d", 6, 1, 9, 0, 0, NULL } },
{ PITCH, .u.n = {"@F%x", 10, 0, 15, 0, 0, NULL } },
{ VOL, .u.n = {"@A%x", 10, 0, 15, 0, 0, NULL } },
{ VOICE, .u.n = {"@V%d", 1, 1, 6, 0, 0, NULL } },
{ LANG, .u.n = {"@=%d,", 1, 1, 4, 0, 0, NULL } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID,
VOL_ID, VOICE_ID, LANG_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"cap, " } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"" } },
[RATE_ID] = { RATE, .u.n = {"@W%d", 6, 1, 9, 0, 0, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"@F%x", 10, 0, 15, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"@A%x", 10, 0, 15, 0, 0, NULL } },
[VOICE_ID] = { VOICE, .u.n = {"@V%d", 1, 1, 6, 0, 0, NULL } },
[LANG_ID] = { LANG, .u.n = {"@=%d,", 1, 1, 4, 0, 0, NULL } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -193,10 +206,25 @@ static void do_catch_up(struct spk_synth *synth)
module_param_named(ser, synth_apollo.ser, int, 0444);
module_param_named(dev, synth_apollo.dev_name, charp, 0444);
module_param_named(start, synth_apollo.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
module_param_named(lang, vars[LANG_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(voice, "Set the voice variable on load.");
MODULE_PARM_DESC(lang, "Set the lang variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_apollo);
drivers/accessibility/speakup/speakup_audptr.c
+33 -9
View File
@@ -19,15 +19,24 @@
static int synth_probe(struct spk_synth *synth);
static void synth_flush(struct spk_synth *synth);
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\x05[f99]" } },
{ CAPS_STOP, .u.s = {"\x05[f80]" } },
{ RATE, .u.n = {"\x05[r%d]", 10, 0, 20, 100, -10, NULL } },
{ PITCH, .u.n = {"\x05[f%d]", 80, 39, 4500, 0, 0, NULL } },
{ VOL, .u.n = {"\x05[g%d]", 21, 0, 40, 0, 0, NULL } },
{ TONE, .u.n = {"\x05[s%d]", 9, 0, 63, 0, 0, NULL } },
{ PUNCT, .u.n = {"\x05[A%c]", 0, 0, 3, 0, 0, "nmsa" } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID,
VOL_ID, TONE_ID, PUNCT_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"\x05[f99]" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\x05[f80]" } },
[RATE_ID] = { RATE, .u.n = {"\x05[r%d]", 10, 0, 20, 100, -10, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"\x05[f%d]", 80, 39, 4500, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"\x05[g%d]", 21, 0, 40, 0, 0, NULL } },
[TONE_ID] = { TONE, .u.n = {"\x05[s%d]", 9, 0, 63, 0, 0, NULL } },
[PUNCT_ID] = { PUNCT, .u.n = {"\x05[A%c]", 0, 0, 3, 0, 0, "nmsa" } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -158,10 +167,25 @@ static int synth_probe(struct spk_synth *synth)
module_param_named(ser, synth_audptr.ser, int, 0444);
module_param_named(dev, synth_audptr.dev_name, charp, 0444);
module_param_named(start, synth_audptr.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(tone, "Set the tone variable on load.");
MODULE_PARM_DESC(punct, "Set the punct variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_audptr);
drivers/accessibility/speakup/speakup_bns.c
+28 -8
View File
@@ -16,14 +16,23 @@
#define SYNTH_CLEAR 0x18
#define PROCSPEECH '\r'
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\x05\x31\x32P" } },
{ CAPS_STOP, .u.s = {"\x05\x38P" } },
{ RATE, .u.n = {"\x05%dE", 8, 1, 16, 0, 0, NULL } },
{ PITCH, .u.n = {"\x05%dP", 8, 0, 16, 0, 0, NULL } },
{ VOL, .u.n = {"\x05%dV", 8, 0, 16, 0, 0, NULL } },
{ TONE, .u.n = {"\x05%dT", 8, 0, 16, 0, 0, NULL } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID,
VOL_ID, TONE_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"\x05\x31\x32P" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\x05\x38P" } },
[RATE_ID] = { RATE, .u.n = {"\x05%dE", 8, 1, 16, 0, 0, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"\x05%dP", 8, 0, 16, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"\x05%dV", 8, 0, 16, 0, 0, NULL } },
[TONE_ID] = { TONE, .u.n = {"\x05%dT", 8, 0, 16, 0, 0, NULL } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -113,10 +122,21 @@ static struct spk_synth synth_bns = {
module_param_named(ser, synth_bns.ser, int, 0444);
module_param_named(dev, synth_bns.dev_name, charp, 0444);
module_param_named(start, synth_bns.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(tone, "Set the tone variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_bns);
drivers/accessibility/speakup/speakup_decext.c
+34 -10
View File
@@ -38,16 +38,25 @@ static void synth_flush(struct spk_synth *synth);
static int in_escape;
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"[:dv ap 222]" } },
{ CAPS_STOP, .u.s = {"[:dv ap 100]" } },
{ RATE, .u.n = {"[:ra %d]", 7, 0, 9, 150, 25, NULL } },
{ PITCH, .u.n = {"[:dv ap %d]", 100, 0, 100, 0, 0, NULL } },
{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
{ VOL, .u.n = {"[:dv gv %d]", 13, 0, 16, 0, 5, NULL } },
{ PUNCT, .u.n = {"[:pu %c]", 0, 0, 2, 0, 0, "nsa" } },
{ VOICE, .u.n = {"[:n%c]", 0, 0, 9, 0, 0, "phfdburwkv" } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID, INFLECTION_ID,
VOL_ID, PUNCT_ID, VOICE_ID,
DIRECT_ID, V_LAST_ID,
NB_ID,
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"[:dv ap 222]" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"[:dv ap 100]" } },
[RATE_ID] = { RATE, .u.n = {"[:ra %d]", 7, 0, 9, 150, 25, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"[:dv ap %d]", 100, 0, 100, 0, 0, NULL } },
[INFLECTION_ID] = { INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"[:dv gv %d]", 13, 0, 16, 0, 5, NULL } },
[PUNCT_ID] = { PUNCT, .u.n = {"[:pu %c]", 0, 0, 2, 0, 0, "nsa" } },
[VOICE_ID] = { VOICE, .u.n = {"[:n%c]", 0, 0, 9, 0, 0, "phfdburwkv" } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -225,10 +234,25 @@ static void synth_flush(struct spk_synth *synth)
module_param_named(ser, synth_decext.ser, int, 0444);
module_param_named(dev, synth_decext.dev_name, charp, 0444);
module_param_named(start, synth_decext.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(inflection, vars[INFLECTION_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(inflection, "Set the inflection variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(punct, "Set the punct variable on load.");
MODULE_PARM_DESC(voice, "Set the voice variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_decext);
drivers/accessibility/speakup/speakup_decpc.c
+38 -10
View File
@@ -134,16 +134,27 @@ static int synth_portlist[] = { 0x340, 0x350, 0x240, 0x250, 0 };
static int in_escape, is_flushing;
static int dt_stat, dma_state;
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"[:dv ap 200]" } },
{ CAPS_STOP, .u.s = {"[:dv ap 100]" } },
{ RATE, .u.n = {"[:ra %d]", 9, 0, 18, 150, 25, NULL } },
{ PITCH, .u.n = {"[:dv ap %d]", 80, 0, 100, 20, 0, NULL } },
{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
{ VOL, .u.n = {"[:vo se %d]", 5, 0, 9, 5, 10, NULL } },
{ PUNCT, .u.n = {"[:pu %c]", 0, 0, 2, 0, 0, "nsa" } },
{ VOICE, .u.n = {"[:n%c]", 0, 0, 9, 0, 0, "phfdburwkv" } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID, INFLECTION_ID,
VOL_ID, PUNCT_ID, VOICE_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID,
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"[:dv ap 200]" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"[:dv ap 100]" } },
[RATE_ID] = { RATE, .u.n = {"[:ra %d]", 9, 0, 18, 150, 25, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"[:dv ap %d]", 80, 0, 100, 20, 0, NULL } },
[INFLECTION_ID] = { INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"[:vo se %d]", 5, 0, 9, 5, 10, NULL } },
[PUNCT_ID] = { PUNCT, .u.n = {"[:pu %c]", 0, 0, 2, 0, 0, "nsa" } },
[VOICE_ID] = { VOICE, .u.n = {"[:n%c]", 0, 0, 9, 0, 0, "phfdburwkv" } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -483,8 +494,25 @@ static void dtpc_release(struct spk_synth *synth)
}
module_param_named(start, synth_dec_pc.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(inflection, vars[INFLECTION_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(inflection, "Set the inflection variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(punct, "Set the punct variable on load.");
MODULE_PARM_DESC(voice, "Set the voice variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_dec_pc);
drivers/accessibility/speakup/speakup_dectlk.c
+35 -10
View File
@@ -40,16 +40,24 @@ static int is_flushing;
static DEFINE_SPINLOCK(flush_lock);
static DECLARE_WAIT_QUEUE_HEAD(flush);
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"[:dv ap 160] " } },
{ CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
{ RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
{ PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
{ INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
{ VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
{ PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },
{ VOICE, .u.n = {"[:n%c] ", 0, 0, 9, 0, 0, "phfdburwkv" } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID, INFLECTION_ID,
VOL_ID, PUNCT_ID, VOICE_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID,
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"[:dv ap 160] " } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"[:dv ap 100 ] " } },
[RATE_ID] = { RATE, .u.n = {"[:ra %d] ", 180, 75, 650, 0, 0, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"[:dv ap %d] ", 122, 50, 350, 0, 0, NULL } },
[INFLECTION_ID] = { INFLECTION, .u.n = {"[:dv pr %d] ", 100, 0, 10000, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"[:dv g5 %d] ", 86, 60, 86, 0, 0, NULL } },
[PUNCT_ID] = { PUNCT, .u.n = {"[:pu %c] ", 0, 0, 2, 0, 0, "nsa" } },
[VOICE_ID] = { VOICE, .u.n = {"[:n%c] ", 0, 0, 9, 0, 0, "phfdburwkv" } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -306,10 +314,27 @@ static void synth_flush(struct spk_synth *synth)
module_param_named(ser, synth_dectlk.ser, int, 0444);
module_param_named(dev, synth_dectlk.dev_name, charp, 0444);
module_param_named(start, synth_dectlk.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(inflection, vars[INFLECTION_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(inflection, "Set the inflection variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(punct, "Set the punct variable on load.");
MODULE_PARM_DESC(voice, "Set the voice variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_dectlk);
drivers/accessibility/speakup/speakup_dtlk.c
+39 -11
View File
@@ -37,17 +37,27 @@ static unsigned int synth_portlist[] = {
static u_char synth_status;
static struct var_t vars[] = {
{ CAPS_START, .u.s = {"\x01+35p" } },
{ CAPS_STOP, .u.s = {"\x01-35p" } },
{ RATE, .u.n = {"\x01%ds", 8, 0, 9, 0, 0, NULL } },
{ PITCH, .u.n = {"\x01%dp", 50, 0, 99, 0, 0, NULL } },
{ VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
{ TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
{ PUNCT, .u.n = {"\x01%db", 7, 0, 15, 0, 0, NULL } },
{ VOICE, .u.n = {"\x01%do", 0, 0, 7, 0, 0, NULL } },
{ FREQUENCY, .u.n = {"\x01%df", 5, 0, 9, 0, 0, NULL } },
{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
enum default_vars_id {
CAPS_START_ID = 0, CAPS_STOP_ID,
RATE_ID, PITCH_ID,
VOL_ID, TONE_ID, PUNCT_ID,
VOICE_ID, FREQUENCY_ID,
DIRECT_ID, V_LAST_VAR_ID,
NB_ID,
};
static struct var_t vars[NB_ID] = {
[CAPS_START_ID] = { CAPS_START, .u.s = {"\x01+35p" } },
[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\x01-35p" } },
[RATE_ID] = { RATE, .u.n = {"\x01%ds", 8, 0, 9, 0, 0, NULL } },
[PITCH_ID] = { PITCH, .u.n = {"\x01%dp", 50, 0, 99, 0, 0, NULL } },
[VOL_ID] = { VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
[TONE_ID] = { TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
[PUNCT_ID] = { PUNCT, .u.n = {"\x01%db", 7, 0, 15, 0, 0, NULL } },
[VOICE_ID] = { VOICE, .u.n = {"\x01%do", 0, 0, 7, 0, 0, NULL } },
[FREQUENCY_ID] = { FREQUENCY, .u.n = {"\x01%df", 5, 0, 9, 0, 0, NULL } },
[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -376,9 +386,27 @@ static void dtlk_release(struct spk_synth *synth)
module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_dtlk.startup, short, 0444);
module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
module_param_named(frequency, vars[FREQUENCY_ID].u.n.default_val, int, 0444);
module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
MODULE_PARM_DESC(rate, "Set the rate variable on load.");
MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
MODULE_PARM_DESC(vol, "Set the vol variable on load.");
MODULE_PARM_DESC(tone, "Set the tone variable on load.");
MODULE_PARM_DESC(punct, "Set the punct variable on load.");
MODULE_PARM_DESC(voice, "Set the voice variable on load.");
MODULE_PARM_DESC(frequency, "Set the frequency variable on load.");
MODULE_PARM_DESC(direct, "Set the direct variable on load.");
module_spk_synth(synth_dtlk);

Some files were not shown because too many files have changed in this diff Show More