arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3
Move the vdd_cpu regulator to the device specific dts. This is in preparation of adding the Powkiddy RGB10MAX3 device, which uses a different vendor for the CPU regulator at a different i2c address. Also add a phandle to the bluetooth device so that we can change the compatible string for the RGB10MAX3. This device uses the same pinouts but a different bluetooth device. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240212184950.52210-6-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
committed by
Heiko Stuebner
parent
1b7e19448f
commit
039a03c377
@@ -37,3 +37,21 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -36,3 +36,21 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -614,22 +614,6 @@
|
||||
rockchip,sleep-filter-current-microamp = <100000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
@@ -805,7 +789,7 @@
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
bluetooth: bluetooth {
|
||||
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
|
||||
device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
Reference in New Issue
Block a user