BugLink: https://bugs.launchpad.net/bugs/2114239
commit 5368a67307b3b2c347dc8965ac55b888be665934 upstream.
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc166321f
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Noah Wager <noah.wager@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2114239
[ Upstream commit 235174b2bed88501fda689c113c55737f99332d8 ]
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Noah Wager <noah.wager@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit 9b06d5b956131bde535f5c045cf8c1ff6bfba76c ]
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
Some Makefiles currently override CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
/usr/bin/ld: /tmp/ccd2apay.o: relocation R_X86_64_32 against
`.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/lib/csum] Error 1
openvswitch/Makefile CFLAGS currently do not appear to be used, but
fix it anyway for the case when new tests are introduced in future.
Fixes: 1d0dc857b5d8 ("selftests: drv-net: add checksum tests")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/3d173603ee258f419d0403363765c9f9494ff79a.1737635092.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit 23b3a7c4a7583eac9e3976355928a832c87caa0f ]
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
mptcp Makefile currently overrides CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/mptcp/mptcp_sockopt] Error 1
/usr/bin/ld: /tmp/ccqyMVdb.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Fixes: cc937dad85ae ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/7abc701da9df39c2d6cd15bc3cf9e6cee445cb96.1737621162.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
commit 336d02bc4c6bec5c3d933e5d470a94970f830957 upstream.
When porting librseq commit:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
from librseq to the kernel selftests, the following line was missed
at the end of rseq_init():
rseq_size = get_rseq_kernel_feature_size();
which effectively leaves rseq_size initialized to -1U when glibc does not
have rseq support. glibc supports rseq from version 2.35 onwards.
In a following librseq commit
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
to mimic the libc behavior, a new approach is taken: don't set the
feature size in 'rseq_size' until at least one thread has successfully
registered. This allows using 'rseq_size' in fast-paths to test for both
registration status and available features. The caveat is that on libc
either all threads are registered or none are, while with bare librseq
it is the responsability of the user to register all threads using rseq.
This combines the changes from the following librseq git commits:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
Fixes: a0cc649353bb ("selftests/rseq: Fix mm_cid test failure")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit 4d33dc1bc31df80356c49e40dbd3ddff19500bcb ]
With CONFIG_KPROBES_ON_FTRACE enabled on powerpc, ftrace_location_range
returns ftrace location for bpf_fentry_test1 at offset of 4 bytes from
function entry. This is because branch to _mcount function is at offset
of 4 bytes in function profile sequence.
To fix this, add entry_offset of 4 bytes while verifying the address for
kprobe entry address of bpf_fentry_test1 in verify_perf_link_info in
selftest, when CONFIG_KPROBES_ON_FTRACE is enabled.
Disassemble of bpf_fentry_test1:
c000000000e4b080 <bpf_fentry_test1>:
c000000000e4b080: a6 02 08 7c mflr r0
c000000000e4b084: b9 e2 22 4b bl c00000000007933c <_mcount>
c000000000e4b088: 01 00 63 38 addi r3,r3,1
c000000000e4b08c: b4 07 63 7c extsw r3,r3
c000000000e4b090: 20 00 80 4e blr
When CONFIG_PPC_FTRACE_OUT_OF_LINE [1] is enabled, these function profile
sequence is moved out of line with an unconditional branch at offset 0.
So, the test works without altering the offset for
'CONFIG_KPROBES_ON_FTRACE && CONFIG_PPC_FTRACE_OUT_OF_LINE' case.
Disassemble of bpf_fentry_test1:
c000000000f95190 <bpf_fentry_test1>:
c000000000f95190: 00 00 00 60 nop
c000000000f95194: 01 00 63 38 addi r3,r3,1
c000000000f95198: b4 07 63 7c extsw r3,r3
c000000000f9519c: 20 00 80 4e blr
[1] https://lore.kernel.org/all/20241030070850.1361304-13-hbathini@linux.ibm.com/
Fixes: 23cf7aa539 ("selftests/bpf: Add selftest for fill_link_info")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241209065720.234344-1-skb99@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit e2f0791124a1b6ca8d570110cbd487969d9d41ef ]
Commit f803bcf9208a ("selftests/bpf: Prevent client connect before
server bind in test_tc_tunnel.sh") added code that waits for the
netcat server to start before the netcat client attempts to connect to
it. However, not all calls to 'server_listen' were guarded.
This patch adds the existing 'wait_for_port' guard after the remaining
call to 'server_listen'.
Fixes: f803bcf9208a ("selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241202204530.1143448-1-leogrande@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit 02bc220dc6dc7c56edc4859bc5dd2c08b95d5fb5 ]
intptr_t and uintptr_t are not big enough types on 32-bit architectures
when printing 64-bit values, resulting to the following incorrect
diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (3134324433)
Replace intptr_t and uintptr_t with intmax_t and uintmax_t, respectively.
With this fix, the same test produces more usable diagnostic output:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
Link: https://lore.kernel.org/r/20250108170757.GA6723@strace.io
Fixes: b5bb6d3068 ("selftests/seccomp: fix 32-bit build warnings")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit 2bf66e66d2e6feece6175ec09ec590a0a8563bdd ]
Commit c814bf9589 ("powerpc/selftests: Use timersub() for
gettimeofday()"), got the order of arguments to timersub() wrong,
leading to a negative time delta being reported, eg:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030
time = -3.297781
success: gettimeofday
The correct order is minuend, subtrahend, which in this case is end,
start. Which gives:
test: gettimeofday
tags: git_version:v6.12-rc5-409-gdddf291c3030-dirty
time = 3.300650
success: gettimeofday
Fixes: c814bf9589 ("powerpc/selftests: Use timersub() for gettimeofday()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218114347.428108-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2107449
commit 218cc166321fb3cc8786677ffe0d09a78778a910 upstream.
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2106770
[ Upstream commit 55853cb829dc707427c3519f6b8686682a204368 ]
The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular
dependency on the global-timer target due to its inclusion in
$(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency
warning during the build process.
To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been
replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change
ensures that libatest.so is built before any other targets that require it,
without creating a circular dependency.
This fix addresses the following warning:
make[4]: Entering directory 'tools/testing/selftests/alsa'
make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped.
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory 'tools/testing/selftests/alsa'
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102266
In commit 03c7527e97f7 ("KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits
to be overridden") we made that bitfield in the ID registers unwritable
however the change neglected to make the corresponding update to set_id_regs
resulting in it failing:
ok 56 ID_AA64MMFR0_EL1_BIGEND
==== Test Assertion Failure ====
aarch64/set_id_regs.c:434: masks[idx] & ftr_bits[j].mask == ftr_bits[j].mask
pid=5566 tid=5566 errno=22 - Invalid argument
1 0x00000000004034a7: test_vm_ftr_id_regs at set_id_regs.c:434
2 0x0000000000401b53: main at set_id_regs.c:684
3 0x0000ffff8e6b7543: ?? ??:0
4 0x0000ffff8e6b7617: ?? ??:0
5 0x0000000000401e6f: _start at ??:?
not ok 8 selftests: kvm: set_id_regs # exit=254
Remove ID_AA64MMFR1_EL1.ASIDBITS from the set of bitfields we test for
writeability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241216-kvm-arm64-fix-set-id-asidbits-v1-1-8b105b888fc3@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
(cherry picked from commit 212fbabe1dfecdda35bf5aaa900f745a3bab5ac4)
[koichiroden: follow-up fix from mainline (v6.13-rc7~6^2~1^2~5)]
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102266
commit 6a75f19af16ff482cfd6085c77123aa0f464f8dd upstream.
The sysctl tests for vm.memfd_noexec rely on the kernel to support PID
namespaces (i.e. the kernel is built with CONFIG_PID_NS=y). If the
kernel the test runs on does not support PID namespaces, the first sysctl
test will fail when attempting to spawn a new thread in a new PID
namespace, abort the test, preventing the remaining tests from being run.
This is not desirable, as not all kernels need PID namespaces, but can
still use the other features provided by memfd. Therefore, only run the
sysctl tests if the kernel supports PID namespaces. Otherwise, skip those
tests and emit an informative message to let the user know why the sysctl
tests are not being run.
Link: https://lkml.kernel.org/r/20241205192943.3228757-1-isaacmanjarres@google.com
Fixes: 11f75a0144 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102266
[ Upstream commit a17975992cc11588767175247ccaae1213a8b582 ]
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102181
[ Upstream commit d92906fd1b940681b4509f7bb8ae737789fb4695 ]
On some systems, neighbor discoveries from ns1 for fec0:42::1 (i.e., the
martian trap address) would happen at the wrong time and cause
false-negative test result.
Problem analysis also discovered that IPv6 martian ping test was broken
in that sent neighbor discoveries, not echo requests were inadvertently
trapped
Avoid the race condition by introducing the neighbors to each other
upfront. Also pin down the firewall rules to matching on echo requests
only.
Fixes: efb056e5f1 ("netfilter: ip6t_rpfilter: Fix regression with VRF interfaces")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[koichiroden: adjusted context due to missing commits:
bb0ee78f9418 ("selftests: netfilter: skip tests on early errors")
3f189349e52a ("selftests: netfilter: move to net subdir")]
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102181
Commit 68ec5395bc24, backport of mainline commit a41b3828ec05 ("selftests/bpf:
Verify that sync_linked_regs preserves subreg_def") uses the __xlated() that
wasn't in the v6.6 code-base, and causes BPF selftests to fail compilation.
Remove the use of the __xlated() macro in
tools/testing/selftests/bpf/progs/verifier_scalar_ids.c to fix compilation
failure. Without the __xlated() checks the coverage is reduced, however the
test case still functions just fine.
Fixes: 68ec5395bc24 ("selftests/bpf: Verify that sync_linked_regs preserves subreg_def")
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102181
commit 659b9ba7cb2d7adb64618b87ddfaa528a143766e upstream.
Robert Morris reported the following program type which passes the
verifier in [0]:
SEC("struct_ops/bpf_cubic_init")
void BPF_PROG(bpf_cubic_init, struct sock *sk)
{
asm volatile("r2 = *(u16*)(r1 + 0)"); // verifier should demand u64
asm volatile("*(u32 *)(r2 +1504) = 0"); // 1280 in some configs
}
The second line may or may not work, but the first instruction shouldn't
pass, as it's a narrow load into the context structure of the struct ops
callback. The code falls back to btf_ctx_access to ensure correctness
and obtaining the types of pointers. Ensure that the size of the access
is correctly checked to be 8 bytes, otherwise the verifier thinks the
narrow load obtained a trusted BTF pointer and will permit loads/stores
as it sees fit.
Perform the check on size after we've verified that the load is for a
pointer field, as for scalar values narrow loads are fine. Access to
structs passed as arguments to a BPF program are also treated as
scalars, therefore no adjustment is needed in their case.
Existing verifier selftests are broken by this change, but because they
were incorrect. Verifier tests for d_path were performing narrow load
into context to obtain path pointer, had this program actually run it
would cause a crash. The same holds for verifier_btf_ctx_access tests.
[0]: https://lore.kernel.org/bpf/51338.1732985814@localhost
Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Reported-by: Robert Morris <rtm@mit.edu>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241212092050.3204165-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102118
commit 4a475c0a7eeb3368eca40fe7cb02d157eeddc77a upstream.
When running selftests I encountered the following error message with
some damon tests:
# Traceback (most recent call last):
# File "[...]/damon/./damos_quota.py", line 7, in <module>
# import _damon_sysfs
# ModuleNotFoundError: No module named '_damon_sysfs'
Fix this by adding the _damon_sysfs.py file to TEST_FILES so that it
will be available when running the respective damon selftests.
Link: https://lkml.kernel.org/r/20241127-picks-visitor-7416685b-mheyne@amazon.de
Fixes: 306abb63a8 ("selftests/damon: implement a python module for test-purpose DAMON sysfs controls")
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[koichiroden: adjusted context due to missing commit:
5965d5615b75 ("selftests/damon: classify tests for functionalities and regressions")]
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102118
[ Upstream commit 777f290ab328de333b85558bb6807a69a59b36ba ]
In 'NOFENTRY_ARGS' test case for syntax check, any offset X of
`vfs_read+X` except function entry offset (0) fits the criterion,
even if that offset is not at instruction boundary, as the parser
comes before probing. But with "ENDBR64" instruction on x86, offset
4 is treated as function entry. So, X can't be 4 as well. Thus, 8
was used as offset for the test case. On 64-bit powerpc though, any
offset <= 16 can be considered function entry depending on build
configuration (see arch_kprobe_on_func_entry() for implementation
details). So, use `vfs_read+20` to accommodate that scenario too.
Link: https://lore.kernel.org/r/20241129202621.721159-1-hbathini@linux.ibm.com
Fixes: 4231f30fcc ("selftests/ftrace: Add BTF arguments test cases")
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2102118
[ Upstream commit 46058430fc5d39c114f7e1b9c6ff14c9f41bd531 ]
resctrl selftests discover system properties via a variety of sysfs files.
The MBM and MBA tests need to discover the event and umask with which to
configure the performance event used to measure read memory bandwidth.
This is done by parsing the contents of
/sys/bus/event_source/devices/uncore_imc_<imc instance>/events/cas_count_read
Similarly, the resctrl selftests discover the cache size via
/sys/bus/cpu/devices/cpu<id>/cache/index<index>/size.
Take care to do bounds checking when using fscanf() to read the
contents of files into a string buffer because by default fscanf() assumes
arbitrarily long strings. If the file contains more bytes than the array
can accommodate then an overflow will occur.
Provide a maximum field width to the conversion specifier to protect
against array overflow. The maximum is one less than the array size because
string input stores a terminating null byte that is not covered by the
maximum field width.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2101915
[ Upstream commit d9ccb18f83ea2bb654289b6ecf014fd267cc988b ]
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[koichiroden: adjusted context due to missing commit:
e59f0e93e92e ("selftests: move bpf-offload test from bpf to net")]
CVE-2024-56703
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2101915
[ Upstream commit bc9b3fb827fceec4e05564d6e668280f4470ab5b ]
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2101915
[ Upstream commit 5bf1557e3d6a69113649d831276ea2f97585fc33 ]
test_progs uses glibc specific functions backtrace() and
backtrace_symbols_fd() to print backtrace in case of SIGSEGV.
Recent commit (see fixes) updated test_progs.c to define stub versions
of the same functions with attriubte "weak" in order to allow linking
test_progs against musl libc. Unfortunately this broke the backtrace
handling for glibc builds.
As it turns out, glibc defines backtrace() and backtrace_symbols_fd()
as weak:
$ llvm-readelf --symbols /lib64/libc.so.6 \
| grep -P '( backtrace_symbols_fd| backtrace)$'
4910: 0000000000126b40 161 FUNC WEAK DEFAULT 16 backtrace
6843: 0000000000126f90 852 FUNC WEAK DEFAULT 16 backtrace_symbols_fd
So does test_progs:
$ llvm-readelf --symbols test_progs \
| grep -P '( backtrace_symbols_fd| backtrace)$'
2891: 00000000006ad190 15 FUNC WEAK DEFAULT 13 backtrace
11215: 00000000006ad1a0 41 FUNC WEAK DEFAULT 13 backtrace_symbols_fd
In such situation dynamic linker is not obliged to favour glibc
implementation over the one defined in test_progs.
Compiling with the following simple modification to test_progs.c
demonstrates the issue:
$ git diff
...
\--- a/tools/testing/selftests/bpf/test_progs.c
\+++ b/tools/testing/selftests/bpf/test_progs.c
\@@ -1817,6 +1817,7 @@ int main(int argc, char **argv)
if (err)
return err;
+ *(int *)0xdeadbeef = 42;
err = cd_flavor_subdir(argv[0]);
if (err)
return err;
$ ./test_progs
[0]: Caught signal #11!
Stack trace:
<backtrace not supported>
Segmentation fault (core dumped)
Resolve this by hiding stub definitions behind __GLIBC__ macro check
instead of using "weak" attribute.
Fixes: c9a83e76b5a9 ("selftests/bpf: Fix compile if backtrace support missing in libc")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Tony Ambardar <tony.ambardar@gmail.com>
Reviewed-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20241003210307.3847907-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2101915
[ Upstream commit f13242a46438e690067a4bf47068fde4d5719947 ]
Currently the mount_setattr_test fails on machines with a 64K PAGE_SIZE,
with errors such as:
# RUN mount_setattr_idmapped.invalid_fd_negative ...
mkfs.ext4: No space left on device while writing out and closing file system
# mount_setattr_test.c:1055:invalid_fd_negative:Expected system("mkfs.ext4 -q /mnt/C/ext4.img") (256) == 0 (0)
# invalid_fd_negative: Test terminated by assertion
# FAIL mount_setattr_idmapped.invalid_fd_negative
not ok 12 mount_setattr_idmapped.invalid_fd_negative
The code creates a 100,000 byte tmpfs:
ASSERT_EQ(mount("testing", "/mnt", "tmpfs", MS_NOATIME | MS_NODEV,
"size=100000,mode=700"), 0);
And then a little later creates a 2MB ext4 filesystem in that tmpfs:
ASSERT_EQ(ftruncate(img_fd, 1024 * 2048), 0);
ASSERT_EQ(system("mkfs.ext4 -q /mnt/C/ext4.img"), 0);
At first glance it seems like that should never work, after all 2MB is
larger than 100,000 bytes. However the filesystem image doesn't actually
occupy 2MB on "disk" (actually RAM, due to tmpfs). On 4K kernels the
ext4.img uses ~84KB of actual space (according to du), which just fits.
However on 64K PAGE_SIZE kernels the ext4.img takes at least 256KB,
which is too large to fit in the tmpfs, hence the errors.
It seems fraught to rely on the ext4.img taking less space on disk than
the allocated size, so instead create the tmpfs with a size of 2MB. With
that all 21 tests pass on 64K PAGE_SIZE kernels.
Fixes: 01eadc8dd9 ("tests: add mount_setattr() selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241115134114.1219555-1-mpe@ellerman.id.au
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Matthieu Baerts (NGI0)
Yan Zhai
Liu Ye
Jan Stancek
Mickaël Salaün
Song Yoong Siang
Mathieu Desnoyers
Jakub Kicinski
Saket Kumar Bhaskar
Marco Leogrande
Dmitry V. Levin
Geert Uytterhoeven
Michael Ellerman
Koichiro Den
Paolo Abeni
Li Zhijian
Artem Savkov
Mark Brown
Tiezhu Yang
Isaac J. Manjarres
Adrian Moreno
Phil Sutter
Shung-Hsi Yu
Weizhao Ouyang
Danielle Ratson
Kumar Kartikeya Dwivedi
Maximilian Heyne
Hari Bathini
Reinette Chatre
guanjing
Omid Ehtemam-Haghighi
Alexis Lothoré (eBPF Foundation)
Eduard Zingerman
Kui-Feng Lee
Hangbin Liu
Zijian Zhang