rel-38
2182 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Shobek Attupurath
|
33cd05a16a |
NVIDIA: SAUCE: bt_usb: Disable RTL8852CE upstream driver
Disable RTL8852CE upstream bluetooth driver detection to support downstream driver http://nvbugs/4915378 Signed-off-by: Shobek Attupurath <sattupurath@nvidia.com> Reviewed-by: Ashutosh Jha <ajha@nvidia.com> Signed-off-by: Vishwaroop A <va@nvidia.com> Acked-by: Noah Wager <noah.wager@canonical.com> Acked-by: Jacob Martin <jacob.martin@canonical.com> Signed-off-by: Noah Wager <noah.wager@canonical.com> |
||
|
Shobek Attupurath
|
8895ea673f |
NVIDIA: SAUCE: bluetooth: usb: disable 8822CE modules
Disable Azurewave 8822CE modules from generic driver to use Realtek 8822CE BT driver http://nvbugs/5037464 Signed-off-by: Shobek Attupurath <sattupurath@nvidia.com> Reviewed-by: Brad Griffis <bgriffis@nvidia.com> Reviewed-by: Revanth Kumar Uppala <ruppala@nvidia.com> Signed-off-by: Vishwaroop A <va@nvidia.com> Acked-by: Noah Wager <noah.wager@canonical.com> Acked-by: Jacob Martin <jacob.martin@canonical.com> Signed-off-by: Noah Wager <noah.wager@canonical.com> |
||
 Suresh Mangipudi
|
627370e26e |
NVIDIA: SAUCE: bluetooth: usb: Blacklist 8822CE modules
BugLink: https://bugs.launchpad.net/bugs/2072591 commit bafaa50aff2d8f547b05ef3eebd87fe71146c729 ("Black list 8822CE module from generic driver to use 8822CE BT driver") http://nvbugs/3750163 Signed-off-by: Suresh Mangipudi <smangipudi@nvidia.com> Signed-off-by: Revanth Kumar Uppala <ruppala@nvidia.com> Signed-off-by: Satish Seelamsetti <sseelamsetti@nvidia.com> Reviewed-by: Bitan Biswas <bbiswas@nvidia.com> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Jacob Martin <jacob.martin@canonical.com> Acked-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Noah Wager <noah.wager@canonical.com> |
||
 En-Wei Wu
|
c9fc6eeccd |
Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925
BugLink: https://bugs.launchpad.net/bugs/2114239 [ Upstream commit f63f401130e5c5cd0dd2f18c9df967ab75cd4732 ] Add VID 13d3 & PID 3628 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3628 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
 Andrew Halaney
|
c1975f23af |
Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922
BugLink: https://bugs.launchpad.net/bugs/2114239 [ Upstream commit 45e7d389bf2e52dfc893779c611dd5cff461b590 ] A new machine has a Archer AX3000 / TX55e in it, and out the box reported issues resetting hci0. It looks like this is a MT7922 from the lspci output, so treat it as a MediaTek device and use the proper callbacks. With that in place an xbox controller can be used without issue as seen below: [ 7.047388] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512 [ 9.583883] Bluetooth: hci0: Device setup in 2582842 usecs [ 9.583895] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 9.644780] Bluetooth: hci0: AOSP extensions version v1.00 [ 9.644784] Bluetooth: hci0: AOSP quality report is supported [ 876.379876] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input27 [ 876.380215] hid-generic 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7 [ 876.429368] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input28 [ 876.429423] microsoft 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7 lspci output: root@livingroom:/home/ajhalaney/git# lspci ... 05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter and USB device: root@livingroom:/home/ajhalaney/git# cat /sys/kernel/debug/usb/devices ... T: Bus=01 Lev=01 Prnt=01 Port=10 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3610 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Andrew Halaney <ajhalaney@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Noah Wager <noah.wager@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
 Charles Han
|
b6eaff8801 |
Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()
BugLink: https://bugs.launchpad.net/bugs/2111953 [ Upstream commit b88655bc6593c6a7fdc1248b212d17e581c4334e ] devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error. Fixes: f9183eaad915 ("Bluetooth: btbcm: Use devm_kstrdup()") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
 Neeraj Sanjay Kale
|
a9394dd994 |
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
BugLink: https://bugs.launchpad.net/bugs/2111953
[ Upstream commit 7de119bb79a63f6a1959b83117a98734914fb0b0 ]
This fixes a regression caused by previous commit for fixing truncated
ACL data, which is causing some intermittent glitches when running two
A2DP streams.
serdev_device_write_buf() is the root cause of the glitch, which is
reverted, and the TX work will continue to write until the queue is empty.
This change fixes both issues. No A2DP streaming glitches or truncated
ACL data issue observed.
Fixes: 8023dd220425 ("Bluetooth: btnxpuart: Fix driver sending truncated data")
Fixes:
|
||
|
Neeraj Sanjay Kale
|
12aa4eebf2 |
Bluetooth: btnxpuart: Fix driver sending truncated data
BugLink: https://bugs.launchpad.net/bugs/2106770
[ Upstream commit 8023dd2204254a70887f5ee58d914bf70a060b9d ]
This fixes the apparent controller hang issue seen during stress test
where the host sends a truncated payload, followed by HCI commands. The
controller treats these HCI commands as a part of previously truncated
payload, leading to command timeouts.
Adding a serdev_device_wait_until_sent() call after
serdev_device_write_buf() fixed the issue.
Fixes:
|
||
 Chris Lu
|
ceceefb076 |
Bluetooth: btusb: mediatek: add callback function in btusb_disconnect
BugLink: https://bugs.launchpad.net/bugs/2106632 [ Upstream commit cea1805f165cdd783dd21f26df957118cb8641b4 ] Add disconnect callback function in btusb_disconnect which is reserved for vendor specific usage before deregister hci in btusb_disconnect. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
|
Chris Lu
|
0531755b3d |
Bluetooth: btusb: add callback function in btusb suspend/resume
BugLink: https://bugs.launchpad.net/bugs/2106632 [ Upstream commit 95f92928ad2215b5f524903e67eebd8e14f99564 ] Add suspend/resum callback function in btusb_data which are reserved for vendor specific usage during suspend/resume. hdev->suspend will be added before stop traffic in btusb_suspend and hdev-> resume will be added after resubmit urb in btusb_resume. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: cea1805f165c ("Bluetooth: btusb: mediatek: add callback function in btusb_disconnect") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
 Ulrik Strid
|
57cd4b1959 |
Bluetooth: btusb: Add new VID/PID 13d3/3602 for MT7925
BugLink: https://bugs.launchpad.net/bugs/2106632 [ Upstream commit 560ff4bc99070bfb493018b6b7045af269a008a4 ] Add VID 13d3 & PID 3602 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3602 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Ulrik Strid <ulrik@strid.tech> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: faa5fd605d20 ("Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
 Thadeu Lima de Souza Cascardo
|
12b4e8cf82 |
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
[ Upstream commit b548f5e9456c568155499d9ebac675c0d7a296e8 ]
hci_devcd_append may lead to the release of the skb, so it cannot be
accessed once it is called.
==================================================================
BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk]
Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c
Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024
Workqueue: events btusb_rx_work [btusb]
Call Trace:
<TASK>
dump_stack_lvl+0xfd/0x150
print_report+0x131/0x780
kasan_report+0x177/0x1c0
btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01]
btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60
kmem_cache_alloc+0x19f/0x360
skb_clone+0x132/0xf70
btusb_recv_acl_mtk+0x104/0x1a0 [btusb]
btusb_rx_work+0x9e/0xe0 [btusb]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190
kasan_set_track+0x4e/0x80
kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170
kmem_cache_free+0x183/0x3f0
hci_devcd_rx+0x91a/0x2060 [bluetooth]
worker_thread+0xe44/0x2cc0
kthread+0x2ff/0x3a0
ret_from_fork+0x51/0x80
ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40
which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 112 bytes inside of
freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa
head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0x4000000000000840(slab|head|zone=1)
page_type: 0xffffffff()
raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001
raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc
ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Check if we need to call hci_devcd_complete before calling
hci_devcd_append. That requires that we check data->cd_info.cnt >=
MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we
increment data->cd_info.cnt only once the call to hci_devcd_append
succeeds.
Fixes:
|
||
 Jiande Lu
|
5be3470550 |
Bluetooth: btusb: Add 3 HWIDs for MT7925
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit de7dcf9d1df4b0009735756d0a2adff09c3f21d4 ] Add below HWIDs for MediaTek MT7925 USB Bluetooth chip. VID 0x0489, PID 0xe14f VID 0x0489, PID 0xe150 VID 0x0489, PID 0xe151 Patch has been tested successfully and controller is recognized device pair successfully. MT7925 module bring up message as below. Bluetooth: Core ver 2.22 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Bluetooth: hci0: HW/SW Version: 0x00000000, Build Time: 20240816133202 Bluetooth: hci0: Device setup in 286558 usecs Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. Bluetooth: hci0: AOSP extensions version v1.00 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: MGMT ver 1.22 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> [koichiroden: set BTUSB_VALID_LE_STATES flag. Commit 0fec656d08aa ("Bluetooth: btusb: Invert LE State flag to set invalid rather then valid") is missing. Also adjusted minor context conflicts] Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
 Jonathan McCrohan
|
9e33dd9a69 |
Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit 679cb60fd60774798719c3e449874a168642a8e6 ] Add VID 0489 & PID e124 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e124 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> [koichiroden: set BTUSB_VALID_LE_STATES flag. Commit 0fec656d08aa ("Bluetooth: btusb: Invert LE State flag to set invalid rather then valid") is missing] Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
 Hao Qin
|
aaec075e3b |
Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit faa5fd605d2081b6c9fa2355b59582d4ccd24b16 ] Add VID 0489 & PID e111 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e111 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> [koichiroden: set BTUSB_VALID_LE_STATES flag. Commit 0fec656d08aa ("Bluetooth: btusb: Invert LE State flag to set invalid rather then valid") is missing] Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
|
Jiande Lu
|
6451f6dd52 |
Bluetooth: btusb: Add USB HW IDs for MT7921/MT7922/MT7925
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit 129d329286f624b0ccd66e904a2c27eb4d5196e5 ] Add HW IDs for wireless module specific to Acer/ASUS notebook models to ensure proper recognition and functionality. These HW IDs are extracted from Windows driver inf file. Note some HW IDs without official drivers, still in testing phase. Thus, we update module HW ID and test ensure consistent boot success. Signed-off-by: Jiande Lu <jiande.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: faa5fd605d20 ("Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925") Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit f8a67ffb96c9d4644f24a3d16356a9a925b27b35 linux-6.6.y) [koichiroden: from v6.6.70, dependency for "Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925"] Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
|
Ulrik Strid
|
f318f98a0c |
Bluetooth: btusb: Add new VID/PID 13d3/3602 for MT7925
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit 560ff4bc99070bfb493018b6b7045af269a008a4 ] Add VID 13d3 & PID 3602 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=10 Cnt=02 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3602 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Ulrik Strid <ulrik@strid.tech> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: faa5fd605d20 ("Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925") Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 1e7b1a8e7b6e4aa954a68c1ce5059318bd664930 linux-6.6.y) [koichiroden: from v6.6.70, dependency for "Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925"] Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
 Danil Pylaev
|
f9d90eb4eb |
Bluetooth: Set quirks for ATS2851
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit 677a55ba11a82c2835550a82324cec5fcb2f9e2d ] This adds quirks for broken ats2851 features. Signed-off-by: Danil Pylaev <danstiv404@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
 Hilda Wu
|
d013a20f92 |
Bluetooth: btusb: Add RTL8852BE device 0489:e123 to device tables
BugLink: https://bugs.launchpad.net/bugs/2102118 [ Upstream commit 69b84ffce260ff13826dc10aeb3c3e5c2288a552 ] Add the support ID 0489:e123 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e123 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
 Javier Carrasco
|
7031dfacbc |
Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name()
BugLink: https://bugs.launchpad.net/bugs/2101915
[ Upstream commit e42eec0f182ac0605e658145f6fe3b6a7c256c45 ]
of_find_node_by_path() returns a pointer to a device_node with its
refcount incremented, and a call to of_node_put() is required to
decrement the refcount again and avoid leaking the resource.
If 'of_property_read_string_index(root, "compatible", 0, &tmp)' fails,
the function returns without calling of_node_put(root) before doing so.
The automatic cleanup attribute can be used by means of the __free()
macro to automatically call of_node_put() when the variable goes out of
scope, fixing the issue and also accounting for new error paths.
Fixes:
|
||
 Kiran K
|
631c7ade41 |
Bluetooth: btintel: Do no pass vendor events to stack
BugLink: https://bugs.launchpad.net/bugs/2101915
[ Upstream commit 510e8380b0382ee3b070748656b00f83c9a5bf80 ]
During firmware download, vendor specific events like boot up and
secure send result are generated. These events can be safely processed at
the driver level. Passing on these events to stack prints unnecessary
log as below.
Bluetooth: hci0: Malformed MSFT vendor event: 0x02
Fixes:
|
||
|
Kiran K
|
57c62d856e |
Bluetooth: btintel: Direct exception event to bluetooth stack
BugLink: https://bugs.launchpad.net/bugs/2101042
[ Upstream commit d5359a7f583ab9b7706915213b54deac065bcb81 ]
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes:
|
||
 Luiz Augusto von Dentz
|
3aace72f91 |
Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001
BugLink: https://bugs.launchpad.net/bugs/2097393 commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream. Fake CSR controllers don't seem to handle short-transfer properly which cause command to time out: kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 kernel: usb 1-1: Product: BT DONGLE10 ... Bluetooth: hci1: Opcode 0x1004 failed: -110 kernel: Bluetooth: hci1: command 0x1004 tx timeout According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size Constraints a interrupt transfer is considered complete when the size is 0 (ZPL) or < wMaxPacketSize: 'When an interrupt transfer involves more data than can fit in one data payload of the currently established maximum size, all data payloads are required to be maximum-sized except for the last data payload, which will contain the remaining data. An interrupt transfer is complete when the endpoint does one of the following: • Has transferred exactly the amount of data expected • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet' Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365 Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> |
||
|
Luiz Augusto von Dentz
|
00d2bb2b23 |
Bluetooth: btusb: Fix not being able to reconnect after suspend
BugLink: https://bugs.launchpad.net/bugs/2097393 commit 4084286151fc91cd093578f615bfb68f9efbbfcb upstream. This partially reverts 81b3e33bb054 ("Bluetooth: btusb: Don't fail external suspend requests") as it introduced a call to hci_suspend_dev that assumes the system-suspend which doesn't work well when just the device is being suspended because wakeup flag is only set for remote devices that can wakeup the system. Reported-by: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Kenneth Crudup <kenny@panix.com> Fixes: 610712298b11 ("Bluetooth: btusb: Don't fail external suspend requests") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> |
||
|
Luiz Augusto von Dentz
|
41bc88f8a4 |
Bluetooth: btusb: Don't fail external suspend requests
BugLink: https://bugs.launchpad.net/bugs/2097301 [ Upstream commit 610712298b11b2914be00b35abe9326b5dbb62c8 ] Commit |
||
 Aaron Ma
|
c1357e558a |
Bluetooth: btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
BugLink: https://bugs.launchpad.net/bugs/2085406 Firmwares are already in upstream. kernel boot log as following: Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00190200.bin Bluetooth: hci0: QCA: patch rome 0x190200 build 0x5656, firmware rome 0x190200 build 0x43fb Bluetooth: hci0: using NVM file: qca/nvm_usb_00190200.bin Paired BT headphone, output is good. T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0fc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> (backported from commit add1b1656f909c41aa0186fe75e7a42e2c0d2188) [AaronMa: backported from 6.12+ which set BTUSB_VALID_LE_STATES by default, set LE State flag in 6.11-.] Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Acked-by: Anthony Wong <anthony.wong@canonical.com> Acked-by: Timo Aaltonen <tjaalton@ubuntu.com> Signed-off-by: Mehmet Basaran <mehmet.basaran@canonical.com> |
||
|
Hilda Wu
|
f4fbcca262 |
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
BugLink: https://bugs.launchpad.net/bugs/2089884
[ Upstream commit 9a0570948c5def5c59e588dc0e009ed850a1f5a1 ]
For tracking multiple devices concurrently with a condition.
The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk
on RTL8852B controller.
The quirk setting is based on commit
|
||
|
Hilda Wu
|
20e32a48f2 |
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
BugLink: https://bugs.launchpad.net/bugs/2089884 [ Upstream commit bdf9557f70e7512bb2f754abf90d9e9958745316 ] Add the support ID (0x0489, 0xe122) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e122 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
 Jinjie Ruan
|
0fecfbc120 |
Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()
BugLink: https://bugs.launchpad.net/bugs/2089884
[ Upstream commit 7b1ab460592ca818e7b52f27cd3ec86af79220d1 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes:
|
||
|
Luiz Augusto von Dentz
|
969c3daa11 |
Bluetooth: btusb: Fix not handling ZPL/short-transfer
BugLink: https://bugs.launchpad.net/bugs/2089340 [ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ] Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize. Also, in terms of throughput this change has the same effect to interrupt endpoint as |
||
|
Neeraj Sanjay Kale
|
b80e301d5a |
Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush()
BugLink: https://bugs.launchpad.net/bugs/2085849 [ Upstream commit c68bbf5e334b35b36ac5b9f0419f1f93f796bad1 ] This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> CVE-2024-46749 Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
 Douglas Anderson
|
b5fe959328 |
Bluetooth: qca: If memdump doesn't work, re-enable IBS
BugLink: https://bugs.launchpad.net/bugs/2085849
[ Upstream commit 8ae22de9d2eae3c432de64bf2b3a5a69cf1d1124 ]
On systems in the field, we are seeing this sometimes in the kernel logs:
Bluetooth: qca_controller_memdump() hci0: hci_devcd_init Return:-95
This means that _something_ decided that it wanted to get a memdump
but then hci_devcd_init() returned -EOPNOTSUPP (AKA -95).
The cleanup code in qca_controller_memdump() when we get back an error
from hci_devcd_init() undoes most things but forgets to clear
QCA_IBS_DISABLED. One side effect of this is that, during the next
suspend, qca_suspend() will always get a timeout.
Let's fix it so that we clear the bit.
Fixes:
|
||
|
Neeraj Sanjay Kale
|
311da6d4dd |
Bluetooth: btnxpuart: Fix random crash seen while removing driver
BugLink: https://bugs.launchpad.net/bugs/2084225
[ Upstream commit 35237475384ab3622f63c3c09bdf6af6dacfe9c3 ]
This fixes the random kernel crash seen while removing the driver, when
running the load/unload test over multiple iterations.
1) modprobe btnxpuart
2) hciconfig hci0 reset
3) hciconfig (check hci0 interface up with valid BD address)
4) modprobe -r btnxpuart
Repeat steps 1 to 4
The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(),
which gets scheduled after module is removed, causing a kernel crash.
This hidden issue got highlighted after enabling Power Save by default
in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on
startup)
The new ps_cleanup() deasserts UART break immediately while closing
serdev device, cancels any scheduled ps_work and destroys the ps_lock
mutex.
[ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258
[ 85.884624] Mem abort info:
[ 85.884625] ESR = 0x0000000086000007
[ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits
[ 85.884633] SET = 0, FnV = 0
[ 85.884636] EA = 0, S1PTW = 0
[ 85.884638] FSC = 0x07: level 3 translation fault
[ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000
[ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000
[ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP
[ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)]
[ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1
[ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT)
[ 85.936182] Workqueue: events 0xffffd4a61638f380
[ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 85.952817] pc : 0xffffd4a61638f258
[ 85.952823] lr : 0xffffd4a61638f258
[ 85.952827] sp : ffff8000084fbd70
[ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000
[ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305
[ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970
[ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000
[ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090
[ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139
[ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50
[ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8
[ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000
[ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000
[ 85.977443] Call trace:
[ 85.977446] 0xffffd4a61638f258
[ 85.977451] 0xffffd4a61638f3e8
[ 85.977455] process_one_work+0x1d4/0x330
[ 85.977464] worker_thread+0x6c/0x430
[ 85.977471] kthread+0x108/0x10c
[ 85.977476] ret_from_fork+0x10/0x20
[ 85.977488] Code: bad PC value
[ 85.977491] ---[ end trace 0000000000000000 ]---
Preset since v6.9.11
Fixes:
|
||
|
Neeraj Sanjay Kale
|
d5d69e76c3 |
Bluetooth: btnxpuart: Handle FW Download Abort scenario
BugLink: https://bugs.launchpad.net/bugs/2084225 [ Upstream commit e3c4891098c875a63ab0c3b31d584f6d4f1895fd ] This adds a new flag BTNXPUART_FW_DOWNLOAD_ABORT which handles the situation where driver is removed while firmware download is in progress. logs: modprobe btnxpuart [65239.230431] Bluetooth: hci0: ChipID: 7601, Version: 0 [65239.236670] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se rmmod btnxpuart [65241.425300] Bluetooth: hci0: FW Download Aborted Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 35237475384a ("Bluetooth: btnxpuart: Fix random crash seen while removing driver") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
|
Neeraj Sanjay Kale
|
04644dd11c |
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
BugLink: https://bugs.launchpad.net/bugs/2084225 [ Upstream commit e4db90e4eb8d5487098712ffb1048f3fa6d25e98 ] This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: <load btnxpuart.ko> hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested above script for 50,000 iterations and TX timeout error was not observed anymore. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 35237475384a ("Bluetooth: btnxpuart: Fix random crash seen while removing driver") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
|
Luiz Augusto von Dentz
|
4f208bb0db |
Bluetooth: HCI: Invert LE State quirk to be opt-out rather then opt-in
BugLink: https://bugs.launchpad.net/bugs/2084005
[ Upstream commit aae6b81260fd9a7224f7eb4fc440d625852245bb ]
This inverts the LE State quirk so by default we assume the controllers
would report valid states rather than invalid which is how quirks
normally behave, also this would result in HCI command failing it the LE
States are really broken thus exposing the controllers that are really
broken in this respect.
Link: https://github.com/bluez/bluez/issues/584
Fixes:
|
||
 Luke Wang
|
e13ea94187 |
Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading
BugLink: https://bugs.launchpad.net/bugs/2083656 [ Upstream commit 0d0df1e750bac0fdaa77940e711c1625cff08d33 ] When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Koichiro Den <koichiro.den@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
|
Kiran K
|
86eceda37b |
Bluetooth: btintel: Fail setup on error
BugLink: https://bugs.launchpad.net/bugs/2083488
[ Upstream commit e22a3a9d4134d7e6351a2998771522e74bcc58da ]
Do not attempt to send any hci command to controller if *setup* function
fails.
Fixes:
|
||
 WangYuli
|
1328a698e5 |
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
BugLink: https://bugs.launchpad.net/bugs/2083196 commit 473a89b4ed7fd52a419340f7c540d5c8fc96fc75 upstream. Add the support ID(0x13d3, 0x3591) to usb_device_id table for Realtek RTL8852BE. The device table is as follows: T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3591 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Cc: stable@vger.kernel.org Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Portia Stephens <portia.stephens@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
|
Hilda Wu
|
4579dea665 |
Bluetooth: btusb: Add RTL8852BE device 0489:e125 to device tables
BugLink: https://bugs.launchpad.net/bugs/2083196 commit 295ef07a9dae6182ad4b689aa8c6a7dbba21474c upstream. Add the support ID 0489:e125 to usb_device_id table for Realtek RTL8852B chip. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e125 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Erpeng Xu <xuerpeng@uniontech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Portia Stephens <portia.stephens@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
|
Neeraj Sanjay Kale
|
e622eb1ac9 |
Bluetooth: btnxpuart: Add handling for boot-signature timeout errors
BugLink: https://bugs.launchpad.net/bugs/2083196 [ Upstream commit 27489364299a2ddb5c54cd9f29a3f41bd8d151ab ] This handles the timeout error codes sent by the chip as part of the bootloader signatures during firmware download process. When the bootloader does not receive a response packet from the host within a specific time, it adds an error code to the bootloader signature while requesting for the FW chunk from the same offset. The host is expected to clear this error code with a NAK, and reply to only those bootloader signatures which have error code 0. However, the driver was ignoring this error code and replying with the firmware chunks instead, which is apparently ignored by the chip and the chip resends the same bootloader signature with the error code again. This happens in a loop until the error code self clears and firmware download proceeds ahead, adding a couple of milliseconds to the total firmware download time. Commit |
||
|
Kiran K
|
42a5068964 |
Bluetooth: btintel: Refactor btintel_set_ppag()
BugLink: https://bugs.launchpad.net/bugs/2083196
[ Upstream commit 0a3e2eca1daa5627c8ecd1554e3146de82d61dd2 ]
Current flow iterates the ACPI table associated with Bluetooth
controller looking for PPAG method. Method name can be directly passed
to acpi_evaluate_object function instead of iterating the table.
Fixes:
|
||
 Sven Peter
|
c8777e53cd |
Bluetooth: hci_bcm4377: Use correct unit for timeouts
BugLink: https://bugs.launchpad.net/bugs/2083196
[ Upstream commit 56c695a823e4ee1e5294a8340d5afe5de73828ec ]
BCM4377_TIMEOUT is always used to wait for completitions and their API
expects a timeout in jiffies instead of msecs.
Fixes:
|
||
|
Neeraj Sanjay Kale
|
ff5af969e0 |
Bluetooth: btnxpuart: Enable Power Save feature on startup
BugLink: https://bugs.launchpad.net/bugs/2078304 [ Upstream commit 4183a7be77009fc31c5760429fe095f163bf96a9 ] This sets the default power save mode setting to enabled. The power save feature is now stable and stress test issues, such as the TX timeout error, have been resolved. commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test") With this setting, the driver will send the vendor command to FW at startup, to enable power save feature. User can disable this feature using the following vendor command: hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE) Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Portia Stephens <portia.stephens@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
|
Sven Peter
|
adc5bbf59e |
Bluetooth: Add quirk to ignore reserved PHY bits in LE Extended Adv Report
BugLink: https://bugs.launchpad.net/bugs/2077600 commit ed2a2ef16a6b9197a0e452308bf6acee6e01f709 upstream. Some Broadcom controllers found on Apple Silicon machines abuse the reserved bits inside the PHY fields of LE Extended Advertising Report events for additional flags. Add a quirk to drop these and correctly extract the Primary/Secondary_PHY field. The following excerpt from a btmon trace shows a report received with "Reserved" for "Primary PHY" on a 4388 controller: > HCI Event: LE Meta Event (0x3e) plen 26 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x2515 Props: 0x0015 Connectable Directed Use legacy advertising PDUs Data status: Complete Reserved (0x2500) Legacy PDU Type: Reserved (0x2515) Address type: Random (0x01) Address: 00:00:00:00:00:00 (Static) Primary PHY: Reserved Secondary PHY: No packets SID: no ADI field (0xff) TX power: 127 dBm RSSI: -60 dBm (0xc4) Periodic advertising interval: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (Apple, Inc.) Data length: 0x00 Cc: stable@vger.kernel.org Fixes: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Reported-by: Janne Grunau <j@jannau.net> Closes: https://lore.kernel.org/all/Zjz0atzRhFykROM9@robin Tested-by: Janne Grunau <j@jannau.net> Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Portia Stephens <portia.stephens@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
 Zijun Hu
|
864127c2ff |
Bluetooth: qca: Fix BT enable failure again for QCA6390 after warm reboot
BugLink: https://bugs.launchpad.net/bugs/2077600 commit 88e72239ead9814b886db54fc4ee39ef3c2b8f26 upstream. Commit |
||
 Hector Martin
|
f554ad6ebb |
Bluetooth: hci_bcm4377: Fix msgid release
BugLink: https://bugs.launchpad.net/bugs/2077600
commit 897e6120566f1c108b85fefe78d1c1bddfbd5988 upstream.
We are releasing a single msgid, so the order argument to
bitmap_release_region must be zero.
Fixes:
|
||
 Uri Arev
|
d2bcd6e9a0 |
Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl
BugLink: https://bugs.launchpad.net/bugs/2075154 [ Upstream commit 68aa21054ec3a1a313af90a5f95ade16c3326d20 ] This fixes some CHECKs reported by the checkpatch script. Issues reported in ath3k.c: ------- ath3k.c ------- CHECK: Please don't use multiple blank lines + + CHECK: Blank lines aren't necessary after an open brace '{' +static const struct usb_device_id ath3k_blist_tbl[] = { + CHECK: Alignment should match open parenthesis +static int ath3k_load_firmware(struct usb_device *udev, + const struct firmware *firmware) CHECK: Alignment should match open parenthesis + err = usb_bulk_msg(udev, pipe, send_buf, size, + &len, 3000); CHECK: Unnecessary parentheses around 'len != size' + if (err || (len != size)) { CHECK: Alignment should match open parenthesis +static int ath3k_get_version(struct usb_device *udev, + struct ath3k_version *version) CHECK: Alignment should match open parenthesis +static int ath3k_load_fwfile(struct usb_device *udev, + const struct firmware *firmware) CHECK: Alignment should match open parenthesis + err = usb_bulk_msg(udev, pipe, send_buf, size, + &len, 3000); CHECK: Unnecessary parentheses around 'len != size' + if (err || (len != size)) { CHECK: Blank lines aren't necessary after an open brace '{' + switch (fw_version.ref_clock) { + CHECK: Alignment should match open parenthesis + snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s", + le32_to_cpu(fw_version.rom_version), clk_value, ".dfu"); CHECK: Alignment should match open parenthesis +static int ath3k_probe(struct usb_interface *intf, + const struct usb_device_id *id) CHECK: Alignment should match open parenthesis + BT_ERR("Firmware file \"%s\" not found", + ATH3K_FIRMWARE); CHECK: Alignment should match open parenthesis + BT_ERR("Firmware file \"%s\" request failed (err=%d)", + ATH3K_FIRMWARE, ret); total: 0 errors, 0 warnings, 14 checks, 540 lines checked Signed-off-by: Uri Arev <me@wantyapps.xyz> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> |
||
|
Luiz Augusto von Dentz
|
ae7c729b56 |
Bluetooth: HCI: Remove HCI_AMP support
BugLink: https://bugs.launchpad.net/bugs/2071621 [ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ] Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |
||
 Dan Carpenter
|
8db3a799b3 |
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
BugLink: https://bugs.launchpad.net/bugs/2071621 [ Upstream commit a189f0ee6685457528db7a36ded3085e5d13ddc3 ] Return -ENOMEM on allocation failure. Don't return success. Fixes: cda0d6a198e2 ("Bluetooth: qca: fix info leak when fetching fw build id") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> |