From cc3be107375ec26220a01db26fbab820b291ea66 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 30 Dec 2024 13:44:45 +0100 Subject: [PATCH] arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: remove disabled ov7251 camera BugLink: https://bugs.launchpad.net/bugs/2111953 [ Upstream commit 80b47f14d5433068dd6738c9e6e17ff6648bae41 ] The ov7251node has bindings check errors in the endpoint, and the camera node was disabled since the beginning. Even when switching the node to okay, the endpoint description to the csiphy is missing along with the csiphy parameters. Drop the ov7251 camera entirely until it's properly described. This obviously fixes: sdm845-db845c-navigation-mezzanine.dtso: camera@60: port:endpoint:data-lanes: [0, 1] is too long from schema $id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml# Reviewed-by: Konrad Dybcio Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20241230-topic-misc-dt-fixes-v4-2-1e6880e9dda3@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin Signed-off-by: Manuel Diewald Signed-off-by: Mehmet Basaran --- .../sdm845-db845c-navigation-mezzanine.dtso | 42 ------------------- 1 file changed, 42 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso index b5f717d0ddd9..51f1a4883ab8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso @@ -68,45 +68,3 @@ }; }; }; - -&cci_i2c1 { - #address-cells = <1>; - #size-cells = <0>; - - camera@60 { - compatible = "ovti,ov7251"; - - /* I2C address as per ov7251.txt linux documentation */ - reg = <0x60>; - - /* CAM3_RST_N */ - enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&cam3_default>; - - clocks = <&clock_camcc CAM_CC_MCLK3_CLK>; - clock-names = "xclk"; - clock-frequency = <24000000>; - - /* - * The &vreg_s4a_1p8 trace always powered on. - * - * The 2.8V vdda-supply regulator is enabled when the - * vreg_s4a_1p8 trace is pulled high. - * It too is represented by a fixed regulator. - * - * No 1.2V vddd-supply regulator is used. - */ - vdddo-supply = <&vreg_lvs1a_1p8>; - vdda-supply = <&cam3_avdd_2v8>; - - status = "disabled"; - - port { - ov7251_ep: endpoint { - data-lanes = <0 1>; -/* remote-endpoint = <&csiphy3_ep>; */ - }; - }; - }; -};