From baf4c8f50f0997a1f0f87d921ae61e735e3ce7d6 Mon Sep 17 00:00:00 2001 From: John Ogness Date: Tue, 7 Jan 2025 22:32:57 +0106 Subject: [PATCH] serial: 8250: Adjust the timeout for FIFO mode BugLink: https://bugs.launchpad.net/bugs/2111953 [ Upstream commit d91f98be26510f5f81ec66425bb0306d1ccd571a ] After a console has written a record into UART_TX, it uses wait_for_xmitr() to wait until the data has been sent out before returning. However, wait_for_xmitr() will timeout after 10ms, regardless if the data has been transmitted or not. For single bytes, this timeout is sufficient even at very slow baud rates, such as 1200bps. However, when FIFO mode is used, there may be 64 bytes pushed into the FIFO at once. At a baud rate of 115200bps, the 10ms timeout is still sufficient. But when using lower baud rates (such as 57600bps), the timeout is _not_ sufficient. This causes longer lines to be cut off, resulting in lost and horribly misformatted output on the console. When using FIFO mode, take the number of bytes into account to determine an appropriate maximum timeout. Increasing the timeout does not affect performance since ideally the timeout never occurs. Fixes: 8f3631f0f6eb ("serial/8250: Use fifo in 8250 console driver") Signed-off-by: John Ogness Reviewed-by: Andy Shevchenko Reviewed-by: Wander Lairson Costa Reviewed-by: Petr Mladek Link: https://lore.kernel.org/r/20250107212702.169493-2-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Manuel Diewald Signed-off-by: Mehmet Basaran --- drivers/tty/serial/8250/8250_port.c | 32 +++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index c0c34e410c58..f887a308d214 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2062,7 +2062,8 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) serial8250_rpm_put(up); } -static void wait_for_lsr(struct uart_8250_port *up, int bits) +/* Returns true if @bits were set, false on timeout */ +static bool wait_for_lsr(struct uart_8250_port *up, int bits) { unsigned int status, tmout = 10000; @@ -2077,11 +2078,11 @@ static void wait_for_lsr(struct uart_8250_port *up, int bits) udelay(1); touch_nmi_watchdog(); } + + return (tmout != 0); } -/* - * Wait for transmitter & holding register to empty - */ +/* Wait for transmitter and holding register to empty with timeout */ static void wait_for_xmitr(struct uart_8250_port *up, int bits) { unsigned int tmout; @@ -3318,6 +3319,16 @@ static void serial8250_console_restore(struct uart_8250_port *up) serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS); } +static void fifo_wait_for_lsr(struct uart_8250_port *up, unsigned int count) +{ + unsigned int i; + + for (i = 0; i < count; i++) { + if (wait_for_lsr(up, UART_LSR_THRE)) + return; + } +} + /* * Print a string to the serial port using the device FIFO * @@ -3327,13 +3338,15 @@ static void serial8250_console_restore(struct uart_8250_port *up) static void serial8250_console_fifo_write(struct uart_8250_port *up, const char *s, unsigned int count) { - int i; const char *end = s + count; unsigned int fifosize = up->tx_loadsz; + unsigned int tx_count = 0; bool cr_sent = false; + unsigned int i; while (s != end) { - wait_for_lsr(up, UART_LSR_THRE); + /* Allow timeout for each byte of a possibly full FIFO */ + fifo_wait_for_lsr(up, fifosize); for (i = 0; i < fifosize && s != end; ++i) { if (*s == '\n' && !cr_sent) { @@ -3344,7 +3357,14 @@ static void serial8250_console_fifo_write(struct uart_8250_port *up, cr_sent = false; } } + tx_count = i; } + + /* + * Allow timeout for each byte written since the caller will only wait + * for UART_LSR_BOTH_EMPTY using the timeout of a single character + */ + fifo_wait_for_lsr(up, tx_count); } /*