phy: rcar-gen3-usb2: remove HSUSB registers handling

Since the related driver (CPG/MSSR driver) only manages the first module
clock, this driver should not handle the HSUSB registers. So, this patch
removes the HSUSB registers handling.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt

@@ -7,33 +7,26 @@ Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
 	      SoC.
 - reg: offset and length of the partial USB 2.0 Host register block.
-- reg-names: must be "usb2_host".
 - clocks: clock phandle and specifier pair(s).
 - #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
 
 Optional properties:
 To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
-combined, the device tree node should set HSUSB properties to reg and reg-names
+combined, the device tree node should set interrupt properties to use the
-properties. This is because HSUSB has registers to select USB 2.0 host or
+channel as USB OTG:
-peripheral at that channel:
-- reg: offset and length of the partial HSUSB register block.
-- reg-names: must be "hsusb".
 - interrupts: interrupt specifier for the PHY.
 
 Example (R-Car H3):
 
 	usb-phy@ee080200 {
 		compatible = "renesas,usb2-phy-r8a7795";
-		reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
+		reg = <0 0xee080200 0 0x700>;
-		reg-names = "usb2_host", "hsusb";
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
+		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
-			 <&mstp7_clks R8A7795_CLK_HSUSB>;
 	};
 
 	usb-phy@ee0a0200 {
 		compatible = "renesas,usb2-phy-r8a7795";
 		reg = <0 0xee0a0200 0 0x700>;
-		reg-names = "usb2_host";
 		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
 	};

drivers/phy/phy-rcar-gen3-usb2.c

@@ -74,20 +74,6 @@
 #define USB2_ADPCTRL_IDPULLUP		BIT(5)	/* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS		BIT(4)
 
-/******* HSUSB registers (original offset is +0x100) *******/
-#define HSUSB_LPSTS			0x02
-#define HSUSB_UGCTRL2			0x84
-
-/* Low Power Status register (LPSTS) */
-#define HSUSB_LPSTS_SUSPM		0x4000
-
-/* USB General control register 2 (UGCTRL2) */
-#define HSUSB_UGCTRL2_MASK		0x00000031 /* bit[31:6] should be 0 */
-#define HSUSB_UGCTRL2_USB0SEL		0x00000030
-#define HSUSB_UGCTRL2_USB0SEL_HOST	0x00000010
-#define HSUSB_UGCTRL2_USB0SEL_HS_USB	0x00000020
-#define HSUSB_UGCTRL2_USB0SEL_OTG	0x00000030
-
 struct rcar_gen3_data {
 	void __iomem *base;
 	struct clk *clk;
@@ -95,8 +81,8 @@ struct rcar_gen3_data {
 
 struct rcar_gen3_chan {
 	struct rcar_gen3_data usb2;
-	struct rcar_gen3_data hsusb;
 	struct phy *phy;
+	bool has_otg;
 };
 
 static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
@@ -202,24 +188,15 @@ static int rcar_gen3_phy_usb2_init(struct phy *p)
 {
 	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 	void __iomem *usb2_base = channel->usb2.base;
-	void __iomem *hsusb_base = channel->hsusb.base;
-	u32 val;
 
 	/* Initialize USB2 part */
 	writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
 	writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
 	writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
 
-	/* Initialize HSUSB part */
+	/* Initialize otg part */
-	if (hsusb_base) {
+	if (channel->has_otg)
-		val = readl(hsusb_base + HSUSB_UGCTRL2);
-		val = (val & ~HSUSB_UGCTRL2_USB0SEL) |
-		      HSUSB_UGCTRL2_USB0SEL_OTG;
-		writel(val & HSUSB_UGCTRL2_MASK, hsusb_base + HSUSB_UGCTRL2);
-
-		/* Initialize otg part */
 		rcar_gen3_init_otg(channel);
-	}
 
 	return 0;
 }
@@ -237,7 +214,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 {
 	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
 	void __iomem *usb2_base = channel->usb2.base;
-	void __iomem *hsusb_base = channel->hsusb.base;
 	u32 val;
 
 	val = readl(usb2_base + USB2_USBCTR);
@@ -246,33 +222,6 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p)
 	val &= ~USB2_USBCTR_PLL_RST;
 	writel(val, usb2_base + USB2_USBCTR);
 
-	/*
-	 * TODO: To reduce power consuming, this driver should set the SUSPM
-	 *	after the PHY detects ID pin as peripheral.
-	 */
-	if (hsusb_base) {
-		/* Power on HSUSB PHY */
-		val = readw(hsusb_base + HSUSB_LPSTS);
-		val |= HSUSB_LPSTS_SUSPM;
-		writew(val, hsusb_base + HSUSB_LPSTS);
-	}
-
-	return 0;
-}
-
-static int rcar_gen3_phy_usb2_power_off(struct phy *p)
-{
-	struct rcar_gen3_chan *channel = phy_get_drvdata(p);
-	void __iomem *hsusb_base = channel->hsusb.base;
-	u32 val;
-
-	if (hsusb_base) {
-		/* Power off HSUSB PHY */
-		val = readw(hsusb_base + HSUSB_LPSTS);
-		val &= ~HSUSB_LPSTS_SUSPM;
-		writew(val, hsusb_base + HSUSB_LPSTS);
-	}
-
 	return 0;
 }
 
@@ -280,7 +229,6 @@ static struct phy_ops rcar_gen3_phy_usb2_ops = {
 	.init		= rcar_gen3_phy_usb2_init,
 	.exit		= rcar_gen3_phy_usb2_exit,
 	.power_on	= rcar_gen3_phy_usb2_power_on,
-	.power_off	= rcar_gen3_phy_usb2_power_off,
 	.owner		= THIS_MODULE,
 };
 
@@ -313,6 +261,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	struct rcar_gen3_chan *channel;
 	struct phy_provider *provider;
 	struct resource *res;
+	int irq;
 
 	if (!dev->of_node) {
 		dev_err(dev, "This driver needs device tree\n");
@@ -323,29 +272,19 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	if (!channel)
 		return -ENOMEM;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "usb2_host");
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	channel->usb2.base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(channel->usb2.base))
 		return PTR_ERR(channel->usb2.base);
 
-	/* "hsusb" memory resource is optional */
+	/* call request_irq for OTG */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hsusb");
+	irq = platform_get_irq(pdev, 0);
-
+	if (irq >= 0) {
-	/* To avoid error message by devm_ioremap_resource() */
+		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
-	if (res) {
+				       IRQF_SHARED, dev_name(dev), channel);
-		int irq;
-
-		channel->hsusb.base = devm_ioremap_resource(dev, res);
-		if (IS_ERR(channel->hsusb.base))
-			channel->hsusb.base = NULL;
-		/* call request_irq for OTG */
-		irq = platform_get_irq(pdev, 0);
-		if (irq >= 0)
-			irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
-					       IRQF_SHARED, dev_name(dev),
-					       channel);
 		if (irq < 0)
 			dev_err(dev, "No irq handler (%d)\n", irq);
+		channel->has_otg = true;
 	}
 
 	/* devm_phy_create() will call pm_runtime_enable(dev); */