diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 78c7baca3587..ad4fb90ab23d 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -18,3 +18,17 @@ Description:
 		This file is writeable and can be used to set the assumed
 		battery 'full level'. As batteries age, this value has to be
 		amended over time.
+
+What:		/sys/class/power_supply/max14577-charger/device/fast_charge_timer
+Date:		July 2014
+KernelVersion:	3.18.0
+Contact:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+Description:
+		This entry shows and sets the maximum time the max14577
+		charger operates in fast-charge mode. When the timer expires
+		the device will terminate fast-charge mode (charging current
+		will drop to 0 A) and will trigger interrupt.
+
+		Valid values:
+		- 5, 6 or 7 (hours),
+		- 0: disabled.
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
new file mode 100644
index 000000000000..236264c10b92
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max14577.txt
@@ -0,0 +1,146 @@
+Maxim MAX14577/77836 Multi-Function Device
+
+MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
+Battery Charger and SFOUT LDO output for powering USB devices. It is
+interfaced to host controller using I2C.
+
+MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+
+
+Required properties:
+- compatible : Must be "maxim,max14577" or "maxim,max77836".
+- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
+- interrupts : IRQ line for the chip.
+- interrupt-parent :  The parent interrupt controller.
+
+
+Required nodes:
+ - charger :
+	Node for configuring the charger driver.
+	Required properties:
+		- compatible : "maxim,max14577-charger"
+			or "maxim,max77836-charger"
+		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
+			Valid values:
+			- for max14577: 90000 - 950000;
+			- for max77836: 45000 - 475000;
+		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
+			Valid values:
+			- for max14577: 50000 - 200000;
+			- for max77836: 5000 - 100000;
+		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
+			In an overvoltage condition, INT asserts and charging
+			stops. Valid values:
+			- 6000000, 6500000, 7000000, 7500000;
+		- maxim,constant-uvolt : Battery Constant Voltage in uV;
+			Valid values:
+			- 4000000 - 4280000 (step by 20000);
+			- 4350000;
+
+
+Optional nodes:
+- max14577-muic/max77836-muic :
+	Node used only by extcon consumers.
+	Required properties:
+		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
+
+- regulators :
+	Required properties:
+		- compatible : "maxim,max14577-regulator"
+			or "maxim,max77836-regulator"
+
+	May contain a sub-node per regulator from the list below. Each
+	sub-node should contain the constraints and initialization information
+	for that regulator. See regulator.txt for a description of standard
+	properties for these sub-nodes.
+
+	List of valid regulator names:
+	- for max14577: CHARGER, SAFEOUT.
+	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
+
+	The SAFEOUT is a fixed voltage regulator so there is no need to specify
+	voltages for it.
+
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+max14577@25 {
+	compatible = "maxim,max14577";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max14577-muic {
+		compatible = "maxim,max14577-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max14577-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+	};
+
+	charger {
+		compatible = "maxim,max14577-charger";
+
+		maxim,constant-uvolt = <4350000>;
+		maxim,fast-charge-uamp = <450000>;
+		maxim,eoc-uamp = <50000>;
+		maxim,ovp-uvolt = <6500000>;
+	};
+};
+
+
+max77836@25 {
+	compatible = "maxim,max77836";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max77836-muic {
+		compatible = "maxim,max77836-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max77836-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+		LDO1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		LDO2 {
+			regulator-name = "LDO2";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3950000>;
+		};
+	};
+
+	charger {
+		compatible = "maxim,max77836-charger";
+
+		maxim,constant-uvolt = <4350000>;
+		maxim,fast-charge-uamp = <225000>;
+		maxim,eoc-uamp = <7500>;
+		maxim,ovp-uvolt = <6500000>;
+	};
+};
diff --git a/Documentation/hwmon/menf21bmc b/Documentation/hwmon/menf21bmc
new file mode 100644
index 000000000000..2a273a065c5e
--- /dev/null
+++ b/Documentation/hwmon/menf21bmc
@@ -0,0 +1,50 @@
+Kernel driver menf21bmc_hwmon
+=============================
+
+Supported chips:
+	* MEN 14F021P00
+	  Prefix: 'menf21bmc_hwmon'
+	  Adresses scanned: -
+
+Author: Andreas Werner <andreas.werner@men.de>
+
+Description
+-----------
+
+The menf21bmc is a Board Management Controller (BMC) which provides an I2C
+interface to the host to access the features implemented in the BMC.
+
+This driver gives access to the voltage monitoring feature of the main
+voltages of the board.
+The voltage sensors are connected to the ADC inputs of the BMC which is
+a PIC16F917 Mikrocontroller.
+
+Usage Notes
+-----------
+
+This driver is part of the MFD driver named "menf21bmc" and does
+not auto-detect devices.
+You will have to instantiate the MFD driver explicitly.
+Please see Documentation/i2c/instantiating-devices for
+details.
+
+Sysfs entries
+-------------
+
+The following attributes are supported. All attributes are read only
+The Limits are read once by the driver.
+
+in0_input	+3.3V input voltage
+in1_input	+5.0V input voltage
+in2_input	+12.0V input voltage
+in3_input	+5V Standby input voltage
+in4_input	VBAT (on board battery)
+
+in[0-4]_min	Minimum voltage limit
+in[0-4]_max	Maximum voltage limit
+
+in0_label	"MON_3_3V"
+in1_label	"MON_5V"
+in2_label	"MON_12V"
+in3_label	"5V_STANDBY"
+in4_label	"VBAT"
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index f00d048aa583..c08d172bbab4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -839,6 +839,16 @@ config SENSORS_MCP3021
 	  This driver can also be built as a module.  If so, the module
 	  will be called mcp3021.
 
+config SENSORS_MENF21BMC_HWMON
+	tristate "MEN 14F021P00 BMC Hardware Monitoring"
+	depends on MFD_MENF21BMC
+	help
+	  Say Y here to include support for the MEN 14F021P00 BMC
+	  hardware monitoring.
+
+	  This driver can also be built as a module. If so the module
+	  will be called menf21bmc_hwmon.
+
 config SENSORS_ADCXX
 	tristate "National Semiconductor ADCxxxSxxx"
 	depends on SPI_MASTER
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index be28152c9848..c90a7611efaa 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -115,6 +115,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_MAX6697)	+= max6697.o
 obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
 obj-$(CONFIG_SENSORS_MCP3021)	+= mcp3021.o
+obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
 obj-$(CONFIG_SENSORS_NCT6683)	+= nct6683.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
diff --git a/drivers/hwmon/menf21bmc_hwmon.c b/drivers/hwmon/menf21bmc_hwmon.c
new file mode 100644
index 000000000000..c92229d321c9
--- /dev/null
+++ b/drivers/hwmon/menf21bmc_hwmon.c
@@ -0,0 +1,230 @@
+/*
+ *  MEN 14F021P00 Board Management Controller (BMC) hwmon driver.
+ *
+ *  This is the core hwmon driver of the MEN 14F021P00 BMC.
+ *  The BMC monitors the board voltages which can be access with this
+ *  driver through sysfs.
+ *
+ *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+
+#define DRV_NAME  "menf21bmc_hwmon"
+
+#define BMC_VOLT_COUNT	5
+#define MENF21BMC_V33	0
+#define MENF21BMC_V5	1
+#define MENF21BMC_V12	2
+#define MENF21BMC_V5_SB	3
+#define MENF21BMC_VBAT	4
+
+#define IDX_TO_VOLT_MIN_CMD(idx) (0x40 + idx)
+#define IDX_TO_VOLT_MAX_CMD(idx) (0x50 + idx)
+#define IDX_TO_VOLT_INP_CMD(idx) (0x60 + idx)
+
+struct menf21bmc_hwmon {
+	bool valid;
+	struct i2c_client *i2c_client;
+	unsigned long last_update;
+	int in_val[BMC_VOLT_COUNT];
+	int in_min[BMC_VOLT_COUNT];
+	int in_max[BMC_VOLT_COUNT];
+};
+
+static const char *const input_names[] = {
+	[MENF21BMC_V33]		= "MON_3_3V",
+	[MENF21BMC_V5]		= "MON_5V",
+	[MENF21BMC_V12]		= "MON_12V",
+	[MENF21BMC_V5_SB]	= "5V_STANDBY",
+	[MENF21BMC_VBAT]	= "VBAT"
+};
+
+static struct menf21bmc_hwmon *menf21bmc_hwmon_update(struct device *dev)
+{
+	int i;
+	int val;
+	struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev);
+	struct menf21bmc_hwmon *data_ret = drv_data;
+
+	if (time_after(jiffies, drv_data->last_update + HZ)
+	    || !drv_data->valid) {
+		for (i = 0; i < BMC_VOLT_COUNT; i++) {
+			val = i2c_smbus_read_word_data(drv_data->i2c_client,
+						       IDX_TO_VOLT_INP_CMD(i));
+			if (val < 0) {
+				data_ret = ERR_PTR(val);
+				goto abort;
+			}
+			drv_data->in_val[i] = val;
+		}
+		drv_data->last_update = jiffies;
+		drv_data->valid = true;
+	}
+abort:
+	return data_ret;
+}
+
+static int menf21bmc_hwmon_get_volt_limits(struct menf21bmc_hwmon *drv_data)
+{
+	int i, val;
+
+	for (i = 0; i < BMC_VOLT_COUNT; i++) {
+		val = i2c_smbus_read_word_data(drv_data->i2c_client,
+					       IDX_TO_VOLT_MIN_CMD(i));
+		if (val < 0)
+			return val;
+
+		drv_data->in_min[i] = val;
+
+		val = i2c_smbus_read_word_data(drv_data->i2c_client,
+					       IDX_TO_VOLT_MAX_CMD(i));
+		if (val < 0)
+			return val;
+
+		drv_data->in_max[i] = val;
+	}
+	return 0;
+}
+
+static ssize_t
+show_label(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return sprintf(buf, "%s\n", input_names[attr->index]);
+}
+
+static ssize_t
+show_in(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct menf21bmc_hwmon *drv_data = menf21bmc_hwmon_update(dev);
+
+	if (IS_ERR(drv_data))
+		return PTR_ERR(drv_data);
+
+	return sprintf(buf, "%d\n", drv_data->in_val[attr->index]);
+}
+
+static ssize_t
+show_min(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", drv_data->in_min[attr->index]);
+}
+
+static ssize_t
+show_max(struct device *dev, struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct menf21bmc_hwmon *drv_data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", drv_data->in_max[attr->index]);
+}
+
+#define create_voltage_sysfs(idx)			\
+static SENSOR_DEVICE_ATTR(in##idx##_input, S_IRUGO,	\
+			show_in, NULL, idx);		\
+static SENSOR_DEVICE_ATTR(in##idx##_min, S_IRUGO,	\
+			show_min, NULL, idx);		\
+static SENSOR_DEVICE_ATTR(in##idx##_max, S_IRUGO,	\
+			show_max, NULL, idx);		\
+static SENSOR_DEVICE_ATTR(in##idx##_label, S_IRUGO,	\
+			show_label, NULL, idx);
+
+create_voltage_sysfs(0);
+create_voltage_sysfs(1);
+create_voltage_sysfs(2);
+create_voltage_sysfs(3);
+create_voltage_sysfs(4);
+
+static struct attribute *menf21bmc_hwmon_attrs[] = {
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_label.dev_attr.attr,
+
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_label.dev_attr.attr,
+
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_label.dev_attr.attr,
+
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_label.dev_attr.attr,
+
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_label.dev_attr.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(menf21bmc_hwmon);
+
+static int menf21bmc_hwmon_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct menf21bmc_hwmon *drv_data;
+	struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
+	struct device *hwmon_dev;
+
+	drv_data = devm_kzalloc(&pdev->dev, sizeof(struct menf21bmc_hwmon),
+				GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	drv_data->i2c_client = i2c_client;
+
+	ret = menf21bmc_hwmon_get_volt_limits(drv_data);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read sensor limits");
+		return ret;
+	}
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+						   "menf21bmc", drv_data,
+						   menf21bmc_hwmon_groups);
+	if (IS_ERR(hwmon_dev))
+		return PTR_ERR(hwmon_dev);
+
+	dev_info(&pdev->dev, "MEN 14F021P00 BMC hwmon device enabled");
+
+	return 0;
+}
+
+static struct platform_driver menf21bmc_hwmon = {
+	.probe		= menf21bmc_hwmon_probe,
+	.driver		= {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+module_platform_driver(menf21bmc_hwmon);
+
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_DESCRIPTION("MEN 14F021P00 BMC hwmon");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:menf21bmc_hwmon");
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 8c96e2ddf43b..eadd56c91551 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -468,6 +468,15 @@ config LEDS_OT200
 	  This option enables support for the LEDs on the Bachmann OT200.
 	  Say Y to enable LEDs on the Bachmann OT200.
 
+config LEDS_MENF21BMC
+	tristate "LED support for the MEN 14F021P00 BMC"
+	depends on LEDS_CLASS && MFD_MENF21BMC
+	help
+	  Say Y here to include support for the MEN 14F021P00 BMC LEDs.
+
+	  This driver can also be built as a module. If so the module
+	  will be called leds-menf21bmc.
+
 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 
 config LEDS_BLINKM
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index d8cc5f2777de..9a72fddc1d78 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 obj-$(CONFIG_LEDS_LM355x)		+= leds-lm355x.o
 obj-$(CONFIG_LEDS_BLINKM)		+= leds-blinkm.o
 obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
+obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/leds-menf21bmc.c b/drivers/leds/leds-menf21bmc.c
new file mode 100644
index 000000000000..89dd57769e3b
--- /dev/null
+++ b/drivers/leds/leds-menf21bmc.c
@@ -0,0 +1,131 @@
+/*
+ *  MEN 14F021P00 Board Management Controller (BMC) LEDs Driver.
+ *
+ *  This is the core LED driver of the MEN 14F021P00 BMC.
+ *  There are four LEDs available which can be switched on and off.
+ *  STATUS LED, HOT SWAP LED, USER LED 1, USER LED 2
+ *
+ *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/i2c.h>
+
+#define BMC_CMD_LED_GET_SET	0xA0
+#define BMC_BIT_LED_STATUS	BIT(0)
+#define BMC_BIT_LED_HOTSWAP	BIT(1)
+#define BMC_BIT_LED_USER1	BIT(2)
+#define BMC_BIT_LED_USER2	BIT(3)
+
+struct menf21bmc_led {
+	struct led_classdev cdev;
+	u8 led_bit;
+	const char *name;
+	struct i2c_client *i2c_client;
+};
+
+static struct menf21bmc_led leds[] = {
+	{
+		.name = "menf21bmc:led_status",
+		.led_bit = BMC_BIT_LED_STATUS,
+	},
+	{
+		.name = "menf21bmc:led_hotswap",
+		.led_bit = BMC_BIT_LED_HOTSWAP,
+	},
+	{
+		.name = "menf21bmc:led_user1",
+		.led_bit = BMC_BIT_LED_USER1,
+	},
+	{
+		.name = "menf21bmc:led_user2",
+		.led_bit = BMC_BIT_LED_USER2,
+	}
+};
+
+static DEFINE_MUTEX(led_lock);
+
+static void
+menf21bmc_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+	int led_val;
+	struct menf21bmc_led *led = container_of(led_cdev,
+					struct menf21bmc_led, cdev);
+
+	mutex_lock(&led_lock);
+	led_val = i2c_smbus_read_byte_data(led->i2c_client,
+					   BMC_CMD_LED_GET_SET);
+	if (led_val < 0)
+		goto err_out;
+
+	if (value == LED_OFF)
+		led_val &= ~led->led_bit;
+	else
+		led_val |= led->led_bit;
+
+	i2c_smbus_write_byte_data(led->i2c_client,
+				  BMC_CMD_LED_GET_SET, led_val);
+err_out:
+	mutex_unlock(&led_lock);
+}
+
+static int menf21bmc_led_probe(struct platform_device *pdev)
+{
+	int i;
+	int ret;
+	struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
+
+	for (i = 0; i < ARRAY_SIZE(leds); i++) {
+		leds[i].cdev.name = leds[i].name;
+		leds[i].cdev.brightness_set = menf21bmc_led_set;
+		leds[i].i2c_client = i2c_client;
+		ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+		if (ret < 0)
+			goto err_free_leds;
+	}
+	dev_info(&pdev->dev, "MEN 140F21P00 BMC LED device enabled\n");
+
+	return 0;
+
+err_free_leds:
+	dev_err(&pdev->dev, "failed to register LED device\n");
+
+	for (i = i - 1; i >= 0; i--)
+		led_classdev_unregister(&leds[i].cdev);
+
+	return ret;
+}
+
+static int menf21bmc_led_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(leds); i++)
+		led_classdev_unregister(&leds[i].cdev);
+
+	return 0;
+}
+
+static struct platform_driver menf21bmc_led = {
+	.probe		= menf21bmc_led_probe,
+	.remove		= menf21bmc_led_remove,
+	.driver		= {
+		.name		= "menf21bmc_led",
+		.owner		= THIS_MODULE,
+	},
+};
+
+module_platform_driver(menf21bmc_led);
+
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_DESCRIPTION("MEN 14F021P00 BMC led driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:menf21bmc_led");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf244746..cf66ef1ffaf3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -454,6 +454,21 @@ config MFD_MAX8998
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_MENF21BMC
+	tristate "MEN 14F021P00 Board Management Controller Support"
+	depends on I2C
+	select MFD_CORE
+	help
+	  Say yes here to add support for the MEN 14F021P00 BMC
+	  which is a Board Management Controller connected to the I2C bus.
+	  The device supports multiple sub-devices like LED, HWMON and WDT.
+	  This driver provides common support for accessing the devices;
+	  additional drivers must be enabled in order to use the
+	  functionality of the BMC device.
+
+	  This driver can also be built as a module. If so the module
+	  will be called menf21bmc.
+
 config EZX_PCAP
 	bool "Motorola EZXPCAP Support"
 	depends on SPI_MASTER
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f00148782d9b..d58068aa8aa9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -169,6 +169,7 @@ obj-$(CONFIG_MFD_AS3711)	+= as3711.o
 obj-$(CONFIG_MFD_AS3722)	+= as3722.o
 obj-$(CONFIG_MFD_STW481X)	+= stw481x.o
 obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
+obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 
 intel-soc-pmic-objs		:= intel_soc_pmic_core.o intel_soc_pmic_crc.o
 obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index 4a5e885383f8..b8af263be594 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -26,6 +26,87 @@
 #include <linux/mfd/max14577.h>
 #include <linux/mfd/max14577-private.h>
 
+/*
+ * Table of valid charger currents for different Maxim chipsets.
+ * It is placed here because it is used by both charger and regulator driver.
+ */
+const struct maxim_charger_current maxim_charger_currents[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
+	[MAXIM_DEVICE_TYPE_MAX14577] = {
+		.min		= MAX14577_CHARGER_CURRENT_LIMIT_MIN,
+		.high_start	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START,
+		.high_step	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP,
+		.max		= MAX14577_CHARGER_CURRENT_LIMIT_MAX,
+	},
+	[MAXIM_DEVICE_TYPE_MAX77836] = {
+		.min		= MAX77836_CHARGER_CURRENT_LIMIT_MIN,
+		.high_start	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START,
+		.high_step	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP,
+		.max		= MAX77836_CHARGER_CURRENT_LIMIT_MAX,
+	},
+};
+EXPORT_SYMBOL_GPL(maxim_charger_currents);
+
+/*
+ * maxim_charger_calc_reg_current - Calculate register value for current
+ * @limits:	constraints for charger, matching the MBCICHWRC register
+ * @min_ua:	minimal requested current, micro Amps
+ * @max_ua:	maximum requested current, micro Amps
+ * @dst:	destination to store calculated register value
+ *
+ * Calculates the value of MBCICHWRC (Fast Battery Charge Current) register
+ * for given current and stores it under pointed 'dst'. The stored value
+ * combines low bit (MBCICHWRCL) and high bits (MBCICHWRCH). It is also
+ * properly shifted.
+ *
+ * The calculated register value matches the current which:
+ *  - is always between <limits.min, limits.max>;
+ *  - is always less or equal to max_ua;
+ *  - is the highest possible value;
+ *  - may be lower than min_ua.
+ *
+ * On success returns 0. On error returns -EINVAL (requested min/max current
+ * is outside of given charger limits) and 'dst' is not set.
+ */
+int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
+		unsigned int min_ua, unsigned int max_ua, u8 *dst)
+{
+	unsigned int current_bits = 0xf;
+
+	if (min_ua > max_ua)
+		return -EINVAL;
+
+	if (min_ua > limits->max || max_ua < limits->min)
+		return -EINVAL;
+
+	if (max_ua < limits->high_start) {
+		/*
+		 * Less than high_start, so set the minimal current
+		 * (turn Low Bit off, 0 as high bits).
+		 */
+		*dst = 0x0;
+		return 0;
+	}
+
+	/* max_ua is in range: <high_start, infinite>, cut it to limits.max */
+	max_ua = min(limits->max, max_ua);
+	max_ua -= limits->high_start;
+	/*
+	 * There is no risk of overflow 'max_ua' here because:
+	 *  - max_ua >= limits.high_start
+	 *  - BUILD_BUG checks that 'limits' are: max >= high_start + high_step
+	 */
+	current_bits = max_ua / limits->high_step;
+
+	/* Turn Low Bit on (use range <limits.high_start, limits.max>) ... */
+	*dst = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
+	/* and set proper High Bits */
+	*dst |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(maxim_charger_calc_reg_current);
+
 static const struct mfd_cell max14577_devs[] = {
 	{
 		.name = "max14577-muic",
@@ -35,7 +116,10 @@ static const struct mfd_cell max14577_devs[] = {
 		.name = "max14577-regulator",
 		.of_compatible = "maxim,max14577-regulator",
 	},
-	{ .name = "max14577-charger", },
+	{
+		.name = "max14577-charger",
+		.of_compatible = "maxim,max14577-charger",
+	},
 };
 
 static const struct mfd_cell max77836_devs[] = {
@@ -463,6 +547,20 @@ static int __init max14577_i2c_init(void)
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_i2c_id) != MAXIM_DEVICE_TYPE_NUM);
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_dt_match) != MAXIM_DEVICE_TYPE_NUM);
 
+	/* Valid charger current values must be provided for each chipset */
+	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
+
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START +
+			MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX14577_CHARGER_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
+
+	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START +
+			MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
+			MAX77836_CHARGER_CURRENT_LIMIT_MAX);
+	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
+
 	return i2c_add_driver(&max14577_i2c_driver);
 }
 subsys_initcall(max14577_i2c_init);
diff --git a/drivers/mfd/menf21bmc.c b/drivers/mfd/menf21bmc.c
new file mode 100644
index 000000000000..1c274345820c
--- /dev/null
+++ b/drivers/mfd/menf21bmc.c
@@ -0,0 +1,132 @@
+/*
+ *  MEN 14F021P00 Board Management Controller (BMC) MFD Core Driver.
+ *
+ *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+
+#define BMC_CMD_WDT_EXIT_PROD	0x18
+#define BMC_CMD_WDT_PROD_STAT	0x19
+#define BMC_CMD_REV_MAJOR	0x80
+#define BMC_CMD_REV_MINOR	0x81
+#define BMC_CMD_REV_MAIN	0x82
+
+static struct mfd_cell menf21bmc_cell[] = {
+	{ .name = "menf21bmc_wdt", },
+	{ .name = "menf21bmc_led", },
+	{ .name = "menf21bmc_hwmon", }
+};
+
+static int menf21bmc_wdt_exit_prod_mode(struct i2c_client *client)
+{
+	int val, ret;
+
+	val = i2c_smbus_read_byte_data(client, BMC_CMD_WDT_PROD_STAT);
+	if (val < 0)
+		return val;
+
+	/*
+	 * Production mode should be not active after delivery of the Board.
+	 * To be sure we check it, inform the user and exit the mode
+	 * if active.
+	 */
+	if (val == 0x00) {
+		dev_info(&client->dev,
+			"BMC in production mode. Exit production mode\n");
+
+		ret = i2c_smbus_write_byte(client, BMC_CMD_WDT_EXIT_PROD);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int
+menf21bmc_probe(struct i2c_client *client, const struct i2c_device_id *ids)
+{
+	int rev_major, rev_minor, rev_main;
+	int ret;
+
+	ret = i2c_check_functionality(client->adapter,
+				      I2C_FUNC_SMBUS_BYTE_DATA |
+				      I2C_FUNC_SMBUS_WORD_DATA |
+				      I2C_FUNC_SMBUS_BYTE);
+	if (!ret)
+		return -ENODEV;
+
+	rev_major = i2c_smbus_read_word_data(client, BMC_CMD_REV_MAJOR);
+	if (rev_major < 0) {
+		dev_err(&client->dev, "failed to get BMC major revision\n");
+		return rev_major;
+	}
+
+	rev_minor = i2c_smbus_read_word_data(client, BMC_CMD_REV_MINOR);
+	if (rev_minor < 0) {
+		dev_err(&client->dev, "failed to get BMC minor revision\n");
+		return rev_minor;
+	}
+
+	rev_main = i2c_smbus_read_word_data(client, BMC_CMD_REV_MAIN);
+	if (rev_main < 0) {
+		dev_err(&client->dev, "failed to get BMC main revision\n");
+		return rev_main;
+	}
+
+	dev_info(&client->dev, "FW Revision: %02d.%02d.%02d\n",
+		 rev_major, rev_minor, rev_main);
+
+	/*
+	 * We have to exit the Production Mode of the BMC to activate the
+	 * Watchdog functionality and the BIOS life sign monitoring.
+	 */
+	ret = menf21bmc_wdt_exit_prod_mode(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to leave production mode\n");
+		return ret;
+	}
+
+	ret = mfd_add_devices(&client->dev, 0, menf21bmc_cell,
+			      ARRAY_SIZE(menf21bmc_cell), NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to add BMC sub-devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int menf21bmc_remove(struct i2c_client *client)
+{
+	mfd_remove_devices(&client->dev);
+	return 0;
+}
+
+static const struct i2c_device_id menf21bmc_id_table[] = {
+	{ "menf21bmc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, menf21bmc_id_table);
+
+static struct i2c_driver menf21bmc_driver = {
+	.driver.name	= "menf21bmc",
+	.id_table	= menf21bmc_id_table,
+	.probe		= menf21bmc_probe,
+	.remove		= menf21bmc_remove,
+};
+
+module_i2c_driver(menf21bmc_driver);
+
+MODULE_DESCRIPTION("MEN 14F021P00 BMC mfd core driver");
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 73cfcdf28a36..04e1d2fe2201 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -325,11 +325,12 @@ config CHARGER_MANAGER
           with help of suspend_again support.
 
 config CHARGER_MAX14577
-	tristate "Maxim MAX14577 MUIC battery charger driver"
+	tristate "Maxim MAX14577/77836 battery charger driver"
 	depends on MFD_MAX14577
+	select SYSFS
 	help
 	  Say Y to enable support for the battery charger control sysfs and
-	  platform data of MAX14577 MUICs.
+	  platform data of MAX14577/77836 MUICs.
 
 config CHARGER_MAX8997
 	tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
diff --git a/drivers/power/max14577_charger.c b/drivers/power/max14577_charger.c
index fad2a75b3604..0a2bc7277026 100644
--- a/drivers/power/max14577_charger.c
+++ b/drivers/power/max14577_charger.c
@@ -1,7 +1,7 @@
 /*
- * Battery charger driver for the Maxim 14577
+ * max14577_charger.c - Battery charger driver for the Maxim 14577/77836
  *
- * Copyright (C) 2013 Samsung Electronics
+ * Copyright (C) 2013,2014 Samsung Electronics
  * Krzysztof Kozlowski <k.kozlowski@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,44 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/mfd/max14577-private.h>
+#include <linux/mfd/max14577.h>
 
 struct max14577_charger {
 	struct device *dev;
 	struct max14577	*max14577;
 	struct power_supply	charger;
 
-	unsigned int	charging_state;
-	unsigned int	battery_state;
+	unsigned int		charging_state;
+	unsigned int		battery_state;
+
+	struct max14577_charger_platform_data	*pdata;
 };
 
+/*
+ * Helper function for mapping values of STATUS2/CHGTYP register on max14577
+ * and max77836 chipsets to enum maxim_muic_charger_type.
+ */
+static enum max14577_muic_charger_type maxim_get_charger_type(
+		enum maxim_device_type dev_type, u8 val) {
+	switch (val) {
+	case MAX14577_CHARGER_TYPE_NONE:
+	case MAX14577_CHARGER_TYPE_USB:
+	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+		return val;
+	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX14577_CHARGER_TYPE_RESERVED:
+		if (dev_type == MAXIM_DEVICE_TYPE_MAX77836)
+			val |= 0x8;
+		return val;
+	default:
+		WARN_ONCE(1, "max14577: Unsupported chgtyp register value 0x%02x", val);
+		return val;
+	}
+}
+
 static int max14577_get_charger_state(struct max14577_charger *chg)
 {
 	struct regmap *rmap = chg->max14577->regmap;
@@ -89,19 +117,23 @@ static int max14577_get_online(struct max14577_charger *chg)
 {
 	struct regmap *rmap = chg->max14577->regmap;
 	u8 reg_data;
+	enum max14577_muic_charger_type chg_type;
 
 	max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
 	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
-	switch (reg_data) {
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	switch (chg_type) {
 	case MAX14577_CHARGER_TYPE_USB:
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
 	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+	case MAX77836_CHARGER_TYPE_SPECIAL_BIAS:
 		return 1;
 	case MAX14577_CHARGER_TYPE_NONE:
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
 	case MAX14577_CHARGER_TYPE_RESERVED:
+	case MAX77836_CHARGER_TYPE_RESERVED:
 	default:
 		return 0;
 	}
@@ -118,10 +150,12 @@ static int max14577_get_battery_health(struct max14577_charger *chg)
 	struct regmap *rmap = chg->max14577->regmap;
 	int state = POWER_SUPPLY_HEALTH_GOOD;
 	u8 reg_data;
+	enum max14577_muic_charger_type chg_type;
 
 	max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
 	reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
-	if (reg_data == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
+	chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+	if (chg_type == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
 		state = POWER_SUPPLY_HEALTH_DEAD;
 		goto state_set;
 	}
@@ -147,15 +181,131 @@ static int max14577_get_present(struct max14577_charger *chg)
 	return 1;
 }
 
+static int max14577_set_fast_charge_timer(struct max14577_charger *chg,
+		unsigned long hours)
+{
+	u8 reg_data;
+
+	switch (hours) {
+	case 5 ... 7:
+		reg_data = hours - 3;
+		break;
+	case 0:
+		/* Disable */
+		reg_data = 0x7;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for Fast-Charge Timer: %lu\n",
+				hours);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL1_TCHW_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_REG_CHGCTRL1, CHGCTRL1_TCHW_MASK, reg_data);
+}
+
+static int max14577_init_constant_voltage(struct max14577_charger *chg,
+		unsigned int uvolt)
+{
+	u8 reg_data;
+
+	if (uvolt < MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN ||
+			uvolt > MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		return -EINVAL;
+
+	if (uvolt == 4200000)
+		reg_data = 0x0;
+	else if (uvolt == MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+		reg_data = 0x1f;
+	else if (uvolt <= 4280000) {
+		unsigned int val = uvolt;
+
+		val -= MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN;
+		val /= MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP;
+		if (uvolt <= 4180000)
+			reg_data = 0x1 + val;
+		else
+			reg_data = val; /* Fix for gap between 4.18V and 4.22V */
+	} else
+		return -EINVAL;
+
+	reg_data <<= CHGCTRL3_MBCCVWRC_SHIFT;
+
+	return max14577_write_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL3, reg_data);
+}
+
+static int max14577_init_eoc(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	unsigned int current_bits = 0xf;
+	u8 reg_data;
+
+	switch (chg->max14577->dev_type) {
+	case MAXIM_DEVICE_TYPE_MAX77836:
+		if (uamp < 5000)
+			return -EINVAL; /* Requested current is too low */
+
+		if (uamp >= 7500 && uamp < 10000)
+			current_bits = 0x0;
+		else if (uamp <= 50000) {
+			/* <5000, 7499> and <10000, 50000> */
+			current_bits = uamp / 5000;
+		} else {
+			uamp = min(uamp, 100000U) - 50000U;
+			current_bits = 0xa + uamp / 10000;
+		}
+		break;
+
+	case MAXIM_DEVICE_TYPE_MAX14577:
+	default:
+		if (uamp < MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN)
+			return -EINVAL; /* Requested current is too low */
+
+		uamp = min(uamp, MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+		uamp -= MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN;
+		current_bits = uamp / MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP;
+		break;
+	}
+
+	reg_data = current_bits << CHGCTRL5_EOCS_SHIFT;
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL5, CHGCTRL5_EOCS_MASK,
+			reg_data);
+}
+
+static int max14577_init_fast_charge(struct max14577_charger *chg,
+		unsigned int uamp)
+{
+	u8 reg_data;
+	int ret;
+	const struct maxim_charger_current *limits =
+		&maxim_charger_currents[chg->max14577->dev_type];
+
+	ret = maxim_charger_calc_reg_current(limits, uamp, uamp, &reg_data);
+	if (ret) {
+		dev_err(chg->dev, "Wrong value for fast charge: %u\n", uamp);
+		return ret;
+	}
+
+	return max14577_update_reg(chg->max14577->regmap,
+			MAX14577_CHG_REG_CHG_CTRL4,
+			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+			reg_data);
+}
+
 /*
  * Sets charger registers to proper and safe default values.
  * Some of these values are equal to defaults in MAX14577E
  * data sheet but there are minor differences.
  */
-static void max14577_charger_reg_init(struct max14577_charger *chg)
+static int max14577_charger_reg_init(struct max14577_charger *chg)
 {
 	struct regmap *rmap = chg->max14577->regmap;
 	u8 reg_data;
+	int ret;
 
 	/*
 	 * Charger-Type Manual Detection, default off (set CHGTYPMAN to 0)
@@ -167,10 +317,6 @@ static void max14577_charger_reg_init(struct max14577_charger *chg)
 			CDETCTRL1_CHGDETEN_MASK | CDETCTRL1_CHGTYPMAN_MASK,
 			reg_data);
 
-	/* Battery Fast-Charge Timer, from SM-V700: 6hrs */
-	reg_data = 0x3 << CHGCTRL1_TCHW_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL1, reg_data);
-
 	/*
 	 * Wall-Adapter Rapid Charge, default on
 	 * Battery-Charger, default on
@@ -179,29 +325,46 @@ static void max14577_charger_reg_init(struct max14577_charger *chg)
 	reg_data |= 0x1 << CHGCTRL2_MBCHOSTEN_SHIFT;
 	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL2, reg_data);
 
-	/* Battery-Charger Constant Voltage (CV) Mode, from SM-V700: 4.35V */
-	reg_data = 0xf << CHGCTRL3_MBCCVWRC_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL3, reg_data);
-
-	/*
-	 * Fast Battery-Charge Current Low, default 200-950mA
-	 * Fast Battery-Charge Current High, from SM-V700: 450mA
-	 */
-	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
-	reg_data |= 0x5 << CHGCTRL4_MBCICHWRCH_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL4, reg_data);
-
-	/* End-of-Charge Current, from SM-V700: 50mA */
-	reg_data = 0x0 << CHGCTRL5_EOCS_SHIFT;
-	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL5, reg_data);
-
 	/* Auto Charging Stop, default off */
 	reg_data = 0x0 << CHGCTRL6_AUTOSTOP_SHIFT;
 	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL6, reg_data);
 
-	/* Overvoltage-Protection Threshold, from SM-V700: 6.5V */
-	reg_data = 0x2 << CHGCTRL7_OTPCGHCVS_SHIFT;
+	ret = max14577_init_constant_voltage(chg, chg->pdata->constant_uvolt);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_eoc(chg, chg->pdata->eoc_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_init_fast_charge(chg, chg->pdata->fast_charge_uamp);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg,
+			MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT);
+	if (ret)
+		return ret;
+
+	/* Initialize Overvoltage-Protection Threshold */
+	switch (chg->pdata->ovp_uvolt) {
+	case 7500000:
+		reg_data = 0x0;
+		break;
+	case 6000000:
+	case 6500000:
+	case 7000000:
+		reg_data = 0x1 + (chg->pdata->ovp_uvolt - 6000000) / 500000;
+		break;
+	default:
+		dev_err(chg->dev, "Wrong value for OVP: %u\n",
+				chg->pdata->ovp_uvolt);
+		return -EINVAL;
+	}
+	reg_data <<= CHGCTRL7_OTPCGHCVS_SHIFT;
 	max14577_write_reg(rmap, MAX14577_REG_CHGCTRL7, reg_data);
+
+	return 0;
 }
 
 /* Support property from charger */
@@ -215,7 +378,11 @@ static enum power_supply_property max14577_charger_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
-static const char *model_name = "MAX14577";
+static const char * const model_names[] = {
+	[MAXIM_DEVICE_TYPE_UNKNOWN]	= "MAX14577-like",
+	[MAXIM_DEVICE_TYPE_MAX14577]	= "MAX14577",
+	[MAXIM_DEVICE_TYPE_MAX77836]	= "MAX77836",
+};
 static const char *manufacturer = "Maxim Integrated";
 
 static int max14577_charger_get_property(struct power_supply *psy,
@@ -244,7 +411,8 @@ static int max14577_charger_get_property(struct power_supply *psy,
 		val->intval = max14577_get_online(chg);
 		break;
 	case POWER_SUPPLY_PROP_MODEL_NAME:
-		val->strval = model_name;
+		BUILD_BUG_ON(ARRAY_SIZE(model_names) != MAXIM_DEVICE_TYPE_NUM);
+		val->strval = model_names[chg->max14577->dev_type];
 		break;
 	case POWER_SUPPLY_PROP_MANUFACTURER:
 		val->strval = manufacturer;
@@ -256,6 +424,110 @@ static int max14577_charger_get_property(struct power_supply *psy,
 	return ret;
 }
 
+#ifdef CONFIG_OF
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	struct max14577_charger_platform_data *pdata;
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No charger OF node\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	ret = of_property_read_u32(np, "maxim,constant-uvolt",
+			&pdata->constant_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,constant-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,fast-charge-uamp",
+			&pdata->fast_charge_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,fast-charge-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,eoc-uamp", &pdata->eoc_uamp);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,eoc-uamp field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	ret = of_property_read_u32(np, "maxim,ovp-uvolt", &pdata->ovp_uvolt);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot parse maxim,ovp-uvolt field from DT\n");
+		return ERR_PTR(ret);
+	}
+
+	return pdata;
+}
+#else /* CONFIG_OF */
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+		struct platform_device *pdev)
+{
+	return NULL;
+}
+#endif /* CONFIG_OF */
+
+static ssize_t show_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	u8 reg_data;
+	int ret;
+	unsigned int val;
+
+	ret = max14577_read_reg(chg->max14577->regmap, MAX14577_REG_CHGCTRL1,
+			&reg_data);
+	if (ret)
+		return ret;
+
+	reg_data &= CHGCTRL1_TCHW_MASK;
+	reg_data >>= CHGCTRL1_TCHW_SHIFT;
+	switch (reg_data) {
+	case 0x2 ... 0x4:
+		val = reg_data + 3;
+		break;
+	case 0x7:
+		val = 0;
+		break;
+	default:
+		val = 5;
+		break;
+	}
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_fast_charge_timer(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct max14577_charger *chg = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = max14577_set_fast_charge_timer(chg, val);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static DEVICE_ATTR(fast_charge_timer, S_IRUGO | S_IWUSR,
+		show_fast_charge_timer, store_fast_charge_timer);
+
 static int max14577_charger_probe(struct platform_device *pdev)
 {
 	struct max14577_charger *chg;
@@ -270,7 +542,13 @@ static int max14577_charger_probe(struct platform_device *pdev)
 	chg->dev = &pdev->dev;
 	chg->max14577 = max14577;
 
-	max14577_charger_reg_init(chg);
+	chg->pdata = max14577_charger_dt_init(pdev);
+	if (IS_ERR_OR_NULL(chg->pdata))
+		return PTR_ERR(chg->pdata);
+
+	ret = max14577_charger_reg_init(chg);
+	if (ret)
+		return ret;
 
 	chg->charger.name = "max14577-charger",
 	chg->charger.type = POWER_SUPPLY_TYPE_BATTERY,
@@ -278,24 +556,47 @@ static int max14577_charger_probe(struct platform_device *pdev)
 	chg->charger.num_properties = ARRAY_SIZE(max14577_charger_props),
 	chg->charger.get_property = max14577_charger_get_property,
 
-	ret = power_supply_register(&pdev->dev, &chg->charger);
+	ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
 	if (ret) {
-		dev_err(&pdev->dev, "failed: power supply register\n");
+		dev_err(&pdev->dev, "failed: create sysfs entry\n");
 		return ret;
 	}
 
+	ret = power_supply_register(&pdev->dev, &chg->charger);
+	if (ret) {
+		dev_err(&pdev->dev, "failed: power supply register\n");
+		goto err;
+	}
+
+	/* Check for valid values for charger */
+	BUILD_BUG_ON(MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN +
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP * 0xf !=
+			MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
 	return 0;
+
+err:
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+	return ret;
 }
 
 static int max14577_charger_remove(struct platform_device *pdev)
 {
 	struct max14577_charger *chg = platform_get_drvdata(pdev);
 
+	device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
 	power_supply_unregister(&chg->charger);
 
 	return 0;
 }
 
+static const struct platform_device_id max14577_charger_id[] = {
+	{ "max14577-charger", MAXIM_DEVICE_TYPE_MAX14577, },
+	{ "max77836-charger", MAXIM_DEVICE_TYPE_MAX77836, },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, max14577_charger_id);
+
 static struct platform_driver max14577_charger_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
@@ -303,9 +604,10 @@ static struct platform_driver max14577_charger_driver = {
 	},
 	.probe		= max14577_charger_probe,
 	.remove		= max14577_charger_remove,
+	.id_table	= max14577_charger_id,
 };
 module_platform_driver(max14577_charger_driver);
 
 MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
-MODULE_DESCRIPTION("MAXIM 14577 charger driver");
+MODULE_DESCRIPTION("Maxim 14577/77836 charger driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index 0fbac861080d..14d44706327b 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -277,7 +277,8 @@ static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct i2c_device_id max17040_id[] = {
-	{ "max17040", 0 },
+	{ "max17040" },
+	{ "max77836-battery" },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, max17040_id);
diff --git a/drivers/regulator/max14577.c b/drivers/regulator/max14577.c
index 5d9c605cf534..0ff5a20ac958 100644
--- a/drivers/regulator/max14577.c
+++ b/drivers/regulator/max14577.c
@@ -22,42 +22,6 @@
 #include <linux/mfd/max14577-private.h>
 #include <linux/regulator/of_regulator.h>
 
-/*
- * Valid limits of current for max14577 and max77836 chargers.
- * They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4
- * register for given chipset.
- */
-struct maxim_charger_current {
-	/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */
-	unsigned int min;
-	/*
-	 * Minimal current when high setting is active,
-	 * set in CHGCTRL4/MBCICHWRCH, uA
-	 */
-	unsigned int high_start;
-	/* Value of one step in high setting, uA */
-	unsigned int high_step;
-	/* Maximum current of high setting, uA */
-	unsigned int max;
-};
-
-/* Table of valid charger currents for different Maxim chipsets */
-static const struct maxim_charger_current maxim_charger_currents[] = {
-	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
-	[MAXIM_DEVICE_TYPE_MAX14577] = {
-		.min		= MAX14577_REGULATOR_CURRENT_LIMIT_MIN,
-		.high_start	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START,
-		.high_step	= MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
-		.max		= MAX14577_REGULATOR_CURRENT_LIMIT_MAX,
-	},
-	[MAXIM_DEVICE_TYPE_MAX77836] = {
-		.min		= MAX77836_REGULATOR_CURRENT_LIMIT_MIN,
-		.high_start	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START,
-		.high_step	= MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP,
-		.max		= MAX77836_REGULATOR_CURRENT_LIMIT_MAX,
-	},
-};
-
 static int max14577_reg_is_enabled(struct regulator_dev *rdev)
 {
 	int rid = rdev_get_id(rdev);
@@ -103,8 +67,8 @@ static int max14577_reg_get_current_limit(struct regulator_dev *rdev)
 static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 		int min_uA, int max_uA)
 {
-	int i, current_bits = 0xf;
 	u8 reg_data;
+	int ret;
 	struct max14577 *max14577 = rdev_get_drvdata(rdev);
 	const struct maxim_charger_current *limits =
 		&maxim_charger_currents[max14577->dev_type];
@@ -112,35 +76,9 @@ static int max14577_reg_set_current_limit(struct regulator_dev *rdev,
 	if (rdev_get_id(rdev) != MAX14577_CHARGER)
 		return -EINVAL;
 
-	if (min_uA > limits->max || max_uA < limits->min)
-		return -EINVAL;
-
-	if (max_uA < limits->high_start) {
-		/*
-		 * Less than high_start,
-		 * so set the minimal current (turn only Low Bit off)
-		 */
-		u8 reg_data = 0x0 << CHGCTRL4_MBCICHWRCL_SHIFT;
-		return max14577_update_reg(rdev->regmap,
-				MAX14577_CHG_REG_CHG_CTRL4,
-				CHGCTRL4_MBCICHWRCL_MASK, reg_data);
-	}
-
-	/*
-	 * max_uA is in range: <high_start, inifinite>, so search for
-	 * valid current starting from maximum current.
-	 */
-	for (i = limits->max; i >= limits->high_start; i -= limits->high_step) {
-		if (i <= max_uA)
-			break;
-		current_bits--;
-	}
-	BUG_ON(current_bits < 0); /* Cannot happen */
-
-	/* Turn Low Bit on (use range high_start-max)... */
-	reg_data = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
-	/* and set proper High Bits */
-	reg_data |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
+	ret = maxim_charger_calc_reg_current(limits, min_uA, max_uA, &reg_data);
+	if (ret)
+		return ret;
 
 	return max14577_update_reg(rdev->regmap, MAX14577_CHG_REG_CHG_CTRL4,
 			CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
@@ -442,16 +380,6 @@ static struct platform_driver max14577_regulator_driver = {
 
 static int __init max14577_regulator_init(void)
 {
-	/* Check for valid values for charger */
-	BUILD_BUG_ON(MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START +
-			MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
-			MAX14577_REGULATOR_CURRENT_LIMIT_MAX);
-	BUILD_BUG_ON(MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START +
-			MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP * 0xf !=
-			MAX77836_REGULATOR_CURRENT_LIMIT_MAX);
-	/* Valid charger current values must be provided for each chipset */
-	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
-
 	BUILD_BUG_ON(ARRAY_SIZE(max14577_supported_regulators) != MAX14577_REGULATOR_NUM);
 	BUILD_BUG_ON(ARRAY_SIZE(max77836_supported_regulators) != MAX77836_REGULATOR_NUM);
 
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index f57312fced80..a50828e34e3b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -95,6 +95,16 @@ config GPIO_WATCHDOG
 	  If you say yes here you get support for watchdog device
 	  controlled through GPIO-line.
 
+config MENF21BMC_WATCHDOG
+	tristate "MEN 14F021P00 BMC Watchdog"
+	depends on MFD_MENF21BMC
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
+
+	  This driver can also be built as a module. If so the module
+	  will be called menf21bmc_wdt.
+
 config WM831X_WATCHDOG
 	tristate "WM831x watchdog"
 	depends on MFD_WM831X
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 468c3204c3b1..de1701470c14 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -178,3 +178,4 @@ obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
 obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
diff --git a/drivers/watchdog/menf21bmc_wdt.c b/drivers/watchdog/menf21bmc_wdt.c
new file mode 100644
index 000000000000..2042874d5ce3
--- /dev/null
+++ b/drivers/watchdog/menf21bmc_wdt.c
@@ -0,0 +1,203 @@
+/*
+ *  MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver.
+ *
+ *  Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#define DEVNAME "menf21bmc_wdt"
+
+#define BMC_CMD_WD_ON		0x11
+#define BMC_CMD_WD_OFF		0x12
+#define BMC_CMD_WD_TRIG		0x13
+#define BMC_CMD_WD_TIME		0x14
+#define BMC_CMD_WD_STATE	0x17
+#define BMC_WD_OFF_VAL		0x69
+#define BMC_CMD_RST_RSN		0x92
+
+#define BMC_WD_TIMEOUT_MIN	1	/* in sec */
+#define BMC_WD_TIMEOUT_MAX	6553	/* in sec */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct menf21bmc_wdt {
+	struct watchdog_device wdt;
+	struct i2c_client *i2c_client;
+};
+
+static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data)
+{
+	int rst_rsn;
+
+	rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN);
+	if (rst_rsn < 0)
+		return rst_rsn;
+
+	if (rst_rsn == 0x02)
+		data->wdt.bootstatus |= WDIOF_CARDRESET;
+	else if (rst_rsn == 0x05)
+		data->wdt.bootstatus |= WDIOF_EXTERN1;
+	else if (rst_rsn == 0x06)
+		data->wdt.bootstatus |= WDIOF_EXTERN2;
+	else if (rst_rsn == 0x0A)
+		data->wdt.bootstatus |= WDIOF_POWERUNDER;
+
+	return 0;
+}
+
+static int menf21bmc_wdt_start(struct watchdog_device *wdt)
+{
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON);
+}
+
+static int menf21bmc_wdt_stop(struct watchdog_device *wdt)
+{
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	return i2c_smbus_write_byte_data(drv_data->i2c_client,
+					 BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
+}
+
+static int
+menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout)
+{
+	int ret;
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	/*
+	 *  BMC Watchdog does have a resolution of 100ms.
+	 *  Watchdog API defines the timeout in seconds, so we have to
+	 *  multiply the value.
+	 */
+	ret = i2c_smbus_write_word_data(drv_data->i2c_client,
+					BMC_CMD_WD_TIME, timeout * 10);
+	if (ret < 0)
+		return ret;
+
+	wdt->timeout = timeout;
+
+	return 0;
+}
+
+static int menf21bmc_wdt_ping(struct watchdog_device *wdt)
+{
+	struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
+
+	return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG);
+}
+
+static const struct watchdog_info menf21bmc_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = DEVNAME,
+};
+
+static const struct watchdog_ops menf21bmc_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= menf21bmc_wdt_start,
+	.stop		= menf21bmc_wdt_stop,
+	.ping		= menf21bmc_wdt_ping,
+	.set_timeout	= menf21bmc_wdt_settimeout,
+};
+
+static int menf21bmc_wdt_probe(struct platform_device *pdev)
+{
+	int ret, bmc_timeout;
+	struct menf21bmc_wdt *drv_data;
+	struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
+
+	drv_data = devm_kzalloc(&pdev->dev,
+				sizeof(struct menf21bmc_wdt), GFP_KERNEL);
+	if (!drv_data)
+		return -ENOMEM;
+
+	drv_data->wdt.ops = &menf21bmc_wdt_ops;
+	drv_data->wdt.info = &menf21bmc_wdt_info;
+	drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN;
+	drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX;
+	drv_data->i2c_client = i2c_client;
+
+	/*
+	 * Get the current wdt timeout value from the BMC because
+	 * the BMC will save the value set before if the system restarts.
+	 */
+	bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client,
+					       BMC_CMD_WD_TIME);
+	if (bmc_timeout < 0) {
+		dev_err(&pdev->dev, "failed to get current WDT timeout\n");
+		return bmc_timeout;
+	}
+
+	watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev);
+	watchdog_set_nowayout(&drv_data->wdt, nowayout);
+	watchdog_set_drvdata(&drv_data->wdt, drv_data);
+	platform_set_drvdata(pdev, drv_data);
+
+	ret = menf21bmc_wdt_set_bootstatus(drv_data);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n");
+		return ret;
+	}
+
+	ret = watchdog_register_device(&drv_data->wdt);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register Watchdog device\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n");
+
+	return 0;
+}
+
+static int menf21bmc_wdt_remove(struct platform_device *pdev)
+{
+	struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);
+
+	dev_warn(&pdev->dev,
+		 "Unregister MEN 14F021P00 BMC Watchdog device, board may reset\n");
+
+	watchdog_unregister_device(&drv_data->wdt);
+
+	return 0;
+}
+
+static void menf21bmc_wdt_shutdown(struct platform_device *pdev)
+{
+	struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);
+
+	i2c_smbus_write_word_data(drv_data->i2c_client,
+				  BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
+}
+
+static struct  platform_driver menf21bmc_wdt = {
+	.driver		= {
+		.owner = THIS_MODULE,
+		.name	= DEVNAME,
+	},
+	.probe		= menf21bmc_wdt_probe,
+	.remove		= menf21bmc_wdt_remove,
+	.shutdown	= menf21bmc_wdt_shutdown,
+};
+
+module_platform_driver(menf21bmc_wdt);
+
+MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver");
+MODULE_AUTHOR("Andreas Werner <andreas.werner@men.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:menf21bmc_wdt");
diff --git a/include/linux/mfd/max14577-private.h b/include/linux/mfd/max14577-private.h
index 499253604026..f01c1fae4d84 100644
--- a/include/linux/mfd/max14577-private.h
+++ b/include/linux/mfd/max14577-private.h
@@ -72,15 +72,33 @@ enum max14577_muic_reg {
 	MAX14577_MUIC_REG_END,
 };
 
+/*
+ * Combined charger types for max14577 and max77836.
+ *
+ * On max14577 three lower bits map to STATUS2/CHGTYP field.
+ * However the max77836 has different two last values of STATUS2/CHGTYP.
+ * To indicate the difference enum has two additional values for max77836.
+ * These values are just a register value bitwise OR with 0x8.
+ */
 enum max14577_muic_charger_type {
-	MAX14577_CHARGER_TYPE_NONE = 0,
-	MAX14577_CHARGER_TYPE_USB,
-	MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT,
-	MAX14577_CHARGER_TYPE_DEDICATED_CHG,
-	MAX14577_CHARGER_TYPE_SPECIAL_500MA,
-	MAX14577_CHARGER_TYPE_SPECIAL_1A,
-	MAX14577_CHARGER_TYPE_RESERVED,
-	MAX14577_CHARGER_TYPE_DEAD_BATTERY = 7,
+	MAX14577_CHARGER_TYPE_NONE		= 0x0,
+	MAX14577_CHARGER_TYPE_USB		= 0x1,
+	MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT	= 0x2,
+	MAX14577_CHARGER_TYPE_DEDICATED_CHG	= 0x3,
+	MAX14577_CHARGER_TYPE_SPECIAL_500MA	= 0x4,
+	/* Special 1A or 2A charger */
+	MAX14577_CHARGER_TYPE_SPECIAL_1A	= 0x5,
+	/* max14577: reserved, used on max77836 */
+	MAX14577_CHARGER_TYPE_RESERVED		= 0x6,
+	/* max14577: dead-battery charing with maximum current 100mA */
+	MAX14577_CHARGER_TYPE_DEAD_BATTERY	= 0x7,
+	/*
+	 * max77836: special charger (bias on D+/D-),
+	 * matches register value of 0x6
+	 */
+	MAX77836_CHARGER_TYPE_SPECIAL_BIAS	= 0xe,
+	/* max77836: reserved, register value 0x7 */
+	MAX77836_CHARGER_TYPE_RESERVED		= 0xf,
 };
 
 /* MAX14577 interrupts */
@@ -121,13 +139,15 @@ enum max14577_muic_charger_type {
 #define STATUS2_CHGTYP_SHIFT		0
 #define STATUS2_CHGDETRUN_SHIFT		3
 #define STATUS2_DCDTMR_SHIFT		4
-#define STATUS2_DBCHG_SHIFT		5
+#define MAX14577_STATUS2_DBCHG_SHIFT	5
+#define MAX77836_STATUS2_DXOVP_SHIFT	5
 #define STATUS2_VBVOLT_SHIFT		6
 #define MAX77836_STATUS2_VIDRM_SHIFT	7
 #define STATUS2_CHGTYP_MASK		(0x7 << STATUS2_CHGTYP_SHIFT)
 #define STATUS2_CHGDETRUN_MASK		BIT(STATUS2_CHGDETRUN_SHIFT)
 #define STATUS2_DCDTMR_MASK		BIT(STATUS2_DCDTMR_SHIFT)
-#define STATUS2_DBCHG_MASK		BIT(STATUS2_DBCHG_SHIFT)
+#define MAX14577_STATUS2_DBCHG_MASK	BIT(MAX14577_STATUS2_DBCHG_SHIFT)
+#define MAX77836_STATUS2_DXOVP_MASK	BIT(MAX77836_STATUS2_DXOVP_SHIFT)
 #define STATUS2_VBVOLT_MASK		BIT(STATUS2_VBVOLT_SHIFT)
 #define MAX77836_STATUS2_VIDRM_MASK	BIT(MAX77836_STATUS2_VIDRM_SHIFT)
 
@@ -177,9 +197,11 @@ enum max14577_muic_charger_type {
 #define CTRL3_JIGSET_SHIFT		0
 #define CTRL3_BOOTSET_SHIFT		2
 #define CTRL3_ADCDBSET_SHIFT		4
+#define CTRL3_WBTH_SHIFT		6
 #define CTRL3_JIGSET_MASK		(0x3 << CTRL3_JIGSET_SHIFT)
 #define CTRL3_BOOTSET_MASK		(0x3 << CTRL3_BOOTSET_SHIFT)
 #define CTRL3_ADCDBSET_MASK		(0x3 << CTRL3_ADCDBSET_SHIFT)
+#define CTRL3_WBTH_MASK			(0x3 << CTRL3_WBTH_SHIFT)
 
 /* Slave addr = 0x4A: Charger */
 enum max14577_charger_reg {
@@ -210,16 +232,20 @@ enum max14577_charger_reg {
 #define CDETCTRL1_CHGTYPMAN_SHIFT	1
 #define CDETCTRL1_DCDEN_SHIFT		2
 #define CDETCTRL1_DCD2SCT_SHIFT		3
-#define CDETCTRL1_DCHKTM_SHIFT		4
-#define CDETCTRL1_DBEXIT_SHIFT		5
+#define MAX14577_CDETCTRL1_DCHKTM_SHIFT	4
+#define MAX77836_CDETCTRL1_CDLY_SHIFT	4
+#define MAX14577_CDETCTRL1_DBEXIT_SHIFT	5
+#define MAX77836_CDETCTRL1_DCDCPL_SHIFT	5
 #define CDETCTRL1_DBIDLE_SHIFT		6
 #define CDETCTRL1_CDPDET_SHIFT		7
 #define CDETCTRL1_CHGDETEN_MASK		BIT(CDETCTRL1_CHGDETEN_SHIFT)
 #define CDETCTRL1_CHGTYPMAN_MASK	BIT(CDETCTRL1_CHGTYPMAN_SHIFT)
 #define CDETCTRL1_DCDEN_MASK		BIT(CDETCTRL1_DCDEN_SHIFT)
 #define CDETCTRL1_DCD2SCT_MASK		BIT(CDETCTRL1_DCD2SCT_SHIFT)
-#define CDETCTRL1_DCHKTM_MASK		BIT(CDETCTRL1_DCHKTM_SHIFT)
-#define CDETCTRL1_DBEXIT_MASK		BIT(CDETCTRL1_DBEXIT_SHIFT)
+#define MAX14577_CDETCTRL1_DCHKTM_MASK	BIT(MAX14577_CDETCTRL1_DCHKTM_SHIFT)
+#define MAX77836_CDETCTRL1_CDDLY_MASK	BIT(MAX77836_CDETCTRL1_CDDLY_SHIFT)
+#define MAX14577_CDETCTRL1_DBEXIT_MASK	BIT(MAX14577_CDETCTRL1_DBEXIT_SHIFT)
+#define MAX77836_CDETCTRL1_DCDCPL_MASK	BIT(MAX77836_CDETCTRL1_DCDCPL_SHIFT)
 #define CDETCTRL1_DBIDLE_MASK		BIT(CDETCTRL1_DBIDLE_SHIFT)
 #define CDETCTRL1_CDPDET_MASK		BIT(CDETCTRL1_CDPDET_SHIFT)
 
@@ -255,17 +281,36 @@ enum max14577_charger_reg {
 #define CHGCTRL7_OTPCGHCVS_SHIFT	0
 #define CHGCTRL7_OTPCGHCVS_MASK		(0x3 << CHGCTRL7_OTPCGHCVS_SHIFT)
 
-/* MAX14577 regulator current limits (as in CHGCTRL4 register), uA */
-#define MAX14577_REGULATOR_CURRENT_LIMIT_MIN		 90000
-#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_START	200000
-#define MAX14577_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 50000
-#define MAX14577_REGULATOR_CURRENT_LIMIT_MAX		950000
+/* MAX14577 charger current limits (as in CHGCTRL4 register), uA */
+#define MAX14577_CHARGER_CURRENT_LIMIT_MIN		 90000U
+#define MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START	200000U
+#define MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP	 50000U
+#define MAX14577_CHARGER_CURRENT_LIMIT_MAX		950000U
 
-/* MAX77836 regulator current limits (as in CHGCTRL4 register), uA */
-#define MAX77836_REGULATOR_CURRENT_LIMIT_MIN		 45000
-#define MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_START	100000
-#define MAX77836_REGULATOR_CURRENT_LIMIT_HIGH_STEP	 25000
-#define MAX77836_REGULATOR_CURRENT_LIMIT_MAX		475000
+/* MAX77836 charger current limits (as in CHGCTRL4 register), uA */
+#define MAX77836_CHARGER_CURRENT_LIMIT_MIN		 45000U
+#define MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START	100000U
+#define MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP	 25000U
+#define MAX77836_CHARGER_CURRENT_LIMIT_MAX		475000U
+
+/*
+ * MAX14577 charger End-Of-Charge current limits
+ * (as in CHGCTRL5 register), uA
+ */
+#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN		50000U
+#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP		10000U
+#define MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX		200000U
+
+/*
+ * MAX14577/MAX77836 Battery Constant Voltage
+ * (as in CHGCTRL3 register), uV
+ */
+#define MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN		4000000U
+#define MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP		20000U
+#define MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX		4350000U
+
+/* Default value for fast charge timer, in hours */
+#define MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT		5
 
 /* MAX14577 regulator SFOUT LDO voltage, fixed, uV */
 #define MAX14577_REGULATOR_SAFEOUT_VOLTAGE		4900000
diff --git a/include/linux/mfd/max14577.h b/include/linux/mfd/max14577.h
index c83fbed1c7b6..ccfaf952c31b 100644
--- a/include/linux/mfd/max14577.h
+++ b/include/linux/mfd/max14577.h
@@ -54,6 +54,13 @@ struct max14577_regulator_platform_data {
 	struct device_node *of_node;
 };
 
+struct max14577_charger_platform_data {
+	u32 constant_uvolt;
+	u32 fast_charge_uamp;
+	u32 eoc_uamp;
+	u32 ovp_uvolt;
+};
+
 /*
  * MAX14577 MFD platform data
  */
@@ -74,4 +81,27 @@ struct max14577_platform_data {
 	struct max14577_regulator_platform_data *regulators;
 };
 
+/*
+ * Valid limits of current for max14577 and max77836 chargers.
+ * They must correspond to MBCICHWRCL and MBCICHWRCH fields in CHGCTRL4
+ * register for given chipset.
+ */
+struct maxim_charger_current {
+	/* Minimal current, set in CHGCTRL4/MBCICHWRCL, uA */
+	unsigned int min;
+	/*
+	 * Minimal current when high setting is active,
+	 * set in CHGCTRL4/MBCICHWRCH, uA
+	 */
+	unsigned int high_start;
+	/* Value of one step in high setting, uA */
+	unsigned int high_step;
+	/* Maximum current of high setting, uA */
+	unsigned int max;
+};
+
+extern const struct maxim_charger_current maxim_charger_currents[];
+extern int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
+		unsigned int min_ua, unsigned int max_ua, u8 *dst);
+
 #endif /* __MAX14577_H__ */