c03875880c
* This is a tree for all Nintendo Switch variants: `odin`, `modin`, `vali`, and `frig`. * `ro.hardware` will be NX on all variants with `ro.hardware.sku` being set per variant by u-boot. Changes are as follows: * At the moment the packaged DTB is only for `odin`, more to follow. * Note: We may make `modin`, `vail`, and `frig` device-tree-overlays on the `odin` base DTB to simplify things. * Use darcy's thermal config as it's the most lenient, and is a same SoC STB. * Unlike `icosa_sr` previously did, we will use the BCM HAL for BT over BTLinux, as A2DP is tested and verified, no need to deviate. Changes that will require follow-up commits to build out: * Update init to reflect nx's needs - will need more work to support devices other than `odin`. Removals are as follows: * Remove all non-nx device support files. Co-authored-by: Thomas Makin <halorocker89@gmail.com> Co-authored-by: Billy Laws <blaws05@gmail.com> Co-authored-by: Aaron Kling <webgeek1234@gmail.com> Co-authored-by: CTCaer <ctcaer@gmail.com> Co-authored-by: John Smith <nemui3353@gmail.com> Co-authored-by: langerhans <langerhans@users.noreply.github.com> Co-authored-by: Nolen Johnson <johnsonnolen@gmail.com> Change-Id: I9bab4d94c6e94a9c6e2a7cf04d16c4b76c0b6ac5
116 lines
5.1 KiB
XML
116 lines
5.1 KiB
XML
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
|
|
<!-- Copyright (C) 2015 The Android Open Source Project
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
-->
|
|
<!-- Copyright (C) 2018-2019 NVIDIA Corporation. All rights reserved. -->
|
|
|
|
<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
|
|
<!-- version section contains a “version” tag in the form “major.minor” e.g version=”1.0” -->
|
|
|
|
<!-- Global configuration Decalaration -->
|
|
<!--globalConfiguration speaker_drc_enabled="true"/-->
|
|
|
|
|
|
<!-- Modules section:
|
|
There is one section per audio HW module present on the platform.
|
|
Each module section will contains two mandator y tags for audio HAL “halVersion” and “name”.
|
|
The module names are the same as in current .conf file:
|
|
“primary”, “A2DP”, “remote_submix”, “USB”
|
|
Each module will contain the following sections:
|
|
“devicePorts”: a list of device descriptors for all input and output devices accessible via this
|
|
module.
|
|
This contains both permanently attached devices and removable devices.
|
|
“mixPorts”: listing all output and input streams exposed by the audio HAL
|
|
“routes”: list of possible connections between input and output devices or between stream and
|
|
devices.
|
|
"route": is defined by an attribute:
|
|
-"type": <mux|mix> means all sources are mutual exclusive (mux) or can be mixed (mix)
|
|
-"sink": the sink involved in this route
|
|
-"sources": all the sources than can be connected to the sink via vis route
|
|
“attachedDevices”: permanently attached devices.
|
|
The attachedDevices section is a list of devices names. The names correspond to device names
|
|
defined in <devicePorts> section.
|
|
“defaultOutputDevice”: device to be used by default when no policy rule applies
|
|
-->
|
|
<modules>
|
|
<!-- Primary Audio HAL -->
|
|
<module name="primary" halVersion="2.0">
|
|
<attachedDevices>
|
|
<item>Speaker</item>
|
|
</attachedDevices>
|
|
<defaultOutputDevice>Speaker</defaultOutputDevice>
|
|
|
|
<!-- Primary HAL mixPorts and devicePorts -->
|
|
<xi:include href="/vendor/etc/primary_module_mixports.xml"/>
|
|
<xi:include href="/vendor/etc/primary_module_deviceports.xml"/>
|
|
|
|
<!-- route declaration, i.e. list all available sources for a given sink -->
|
|
<routes>
|
|
<!-- Playback routes -->
|
|
<route type="mix" sink="Speaker"
|
|
sources="primary_output"/>
|
|
<route type="mix" sink="Wired Headset"
|
|
sources="primary_output"/>
|
|
<route type="mix" sink="Wired Headphones"
|
|
sources="primary_output"/>
|
|
<route type="mix" sink="BT SCO"
|
|
sources="primary_output"/>
|
|
<route type="mix" sink="BT SCO Headset"
|
|
sources="primary_output"/>
|
|
<route type="mix" sink="BT SCO Car Kit"
|
|
sources="primary_output"/>
|
|
<route type="mix" sink="AUX Digital"
|
|
sources="primary_output,multichannel,passthrough,hra"/>
|
|
<route type="mix" sink="Digital Dock HS"
|
|
sources="primary_output"/>
|
|
|
|
<!-- Capture routes -->
|
|
<route type="mix" sink="primary_input"
|
|
sources="BT SCO Headset Mic,Digital Dock HS Mic,AudioIP-In"/>
|
|
</routes>
|
|
|
|
</module>
|
|
|
|
<!-- A2DP Input Audio HAL -->
|
|
<xi:include href="/vendor/etc/a2dp_in_audio_policy_configuration.xml"/>
|
|
|
|
<!-- Usb Audio HAL -->
|
|
<xi:include href="/vendor/etc/usb_audio_policy_configuration.xml"/>
|
|
|
|
<!-- Remote Submix Audio HAL -->
|
|
<xi:include href="/vendor/etc/r_submix_audio_policy_configuration.xml"/>
|
|
|
|
<!-- Bluetooth Audio HAL -->
|
|
<xi:include href="/vendor/etc/bluetooth_audio_policy_configuration.xml"/>
|
|
|
|
<!-- MSD Audio HAL -->
|
|
<xi:include href="/vendor/etc/msd_audio_policy_configuration.xml"/>
|
|
</modules>
|
|
<!-- End of Modules section -->
|
|
|
|
<!-- Volume section -->
|
|
|
|
<xi:include href="/vendor/etc/audio_policy_volumes.xml"/>
|
|
<xi:include href="/vendor/etc/default_volume_tables.xml"/>
|
|
|
|
<!-- End of Volume section -->
|
|
|
|
<!-- Surround Sound configuration -->
|
|
|
|
<xi:include href="surround_sound_configuration_5_0.xml"/>
|
|
|
|
<!-- End of Surround Sound configuration -->
|
|
|
|
</audioPolicyConfiguration>
|