[ 0.513067][ T1] /i2c@7000c000/bm92t@18: Fixed dependency cycle(s) with /padctl@7009f000 [ 0.513632][ T1] /padctl@7009f000: Fixed dependency cycle(s) with /i2c@7000c000/bm92t@18 [ 3.774932][ T1] /padctl@7009f000: Fixed dependency cycle(s) with /i2c@7000c000/bm92t@18 [ 3.781706][ T1] /i2c@7000c000/bm92t@18: Fixed dependency cycle(s) with /padctl@7009f000 [ 4.999891][ T1] bm92t 0-0018: DP handling disabled [ 5.005789][ T1] bm92t 0-0018: fw_type: 0x603, fw_rev: 0xD7C [ 5.010151][ T1] bm92t 0-0018: write reg cmd = 0x06 len = 3 [ 5.029128][ T1] bm92t 0-0018: init done [ 5.133260][ T76] bm92t 0-0018: Disabling VBUS [ 5.139599][ T76] bm92t 0-0018: Unknown cmd rejected! [ 5.150059][ T76] bm92t 0-0018: Invalid state, initiating SYS Reset! [ 5.163413][ T76] bm92t 0-0018: write reg cmd = 0x05 len = 3 [ 5.174663][ T76] bm92t 0-0018: Sent cmd 0x0D 0x0D return value 0 [ 5.284905][ T76] bm92t 0-0018: write reg cmd = 0x06 len = 3 [ 5.289002][ T76] bm92t 0-0018: write reg cmd = 0x19 len = 3 [ 5.294828][ T76] bm92t 0-0018: extcon cable is set to init state [ 5.409602][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.419830][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.430023][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.440217][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.450404][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.460599][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.470791][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.480977][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.491180][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0000 Status2= 0x0000 DP= 0x0000 State= INIT_STATE [ 5.501370][ T14] bm92t 0-0018: Alert= 0x0000 Status1= 0x0D80 Status2= 0x0000 DP= 0x4000 State= INIT_STATE [ 5.601170][ T12] bm92t 0-0018: Supported PDOs: [ 5.603621][ T12] bm92t 0-0018: PDO 1: 1500mA 5000mV DRD [ 5.609164][ T12] bm92t 0-0018: Device in powered mode [ 5.614444][ T12] bm92t 0-0018: Requesting 1: min 900mA, max 1500mA, 5000mV [ 5.621646][ T12] bm92t 0-0018: write reg cmd = 0x30 len = 6 [ 5.628227][ T12] bm92t 0-0018: write reg cmd = 0x05 len = 3 [ 5.633748][ T12] bm92t 0-0018: Sent cmd 0x07 0x07 return value 0 [ 5.639500][ T12] bm92t 0-0018: state = NEW_PDO [ 5.669385][ T12] bm92t 0-0018: cmd done in NEW_PDO state [ 5.682390][ T14] bm92t 0-0018: New PD Contract: [ 5.684930][ T14] bm92t 0-0018: PDO: 1: 1500mA, 5000mV [ 5.690203][ T14] bm92t 0-0018: RDO: op 900mA, 1500mA max [ 5.695750][ T14] bm92t 0-0018: write reg cmd = 0x05 len = 3 [ 5.702053][ T14] bm92t 0-0018: Sent cmd 0x05 0x05 return value 0 [ 5.707809][ T14] bm92t 0-0018: state = PS_RDY_SENT [ 5.715462][ T14] bm92t 0-0018: extcon cable (02: USB HOST) attached [ 5.719728][ T14] bm92t 0-0018: write reg cmd = 0x05 len = 3 [ 5.726030][ T14] bm92t 0-0018: Sent cmd 0x18 0x18 return value 0 [ 5.731775][ T14] bm92t 0-0018: state = DR_SWAP_SENT [ 5.739509][ T14] bm92t 0-0018: DR_SWAP_CMD rejected! [ 5.742450][ T14] bm92t 0-0018: extcon cable (02: USB HOST) detached [ 5.749002][ T14] bm92t 0-0018: extcon cable (01: USB) attached [ 5.755045][ T14] bm92t 0-0018: state = INIT_STATE [ 7.750906][ T76] bm92t 0-0018: Set Charging Current Limit 900ma [ 10.413696][ T12] bm92t_event_handler: 1554 callbacks suppressed [ 10.413707][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.430124][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.440606][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.450832][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.461080][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.471307][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.481507][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.491702][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.501887][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 10.512081][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.415942][ T55] bm92t_event_handler: 1865 callbacks suppressed [ 15.415949][ T55] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.432305][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.442506][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.452721][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.462926][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.473114][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.483314][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.493520][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.503715][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE [ 15.513916][ T12] bm92t 0-0018: Alert= 0x0000 Status1= 0x4DE0 Status2= 0x0001 DP= 0x4000 State= INIT_STATE