ext2 inode attributes with relevance for jfs:
'a' EXT2_APPEND_FL -> append only
'i' EXT2_IMMUTABLE_FL -> immutable file
's' EXT2_SECRM_FL -> zero file
'u' EXT2_UNRM_FL -> allow for unrm
'A' EXT2_NOATIME_FL -> no access time
'D' EXT2_DIRSYNC_FL -> dirsync
'S' EXT2_SYNC_FL -> sync
overview of jfs flags (partially for OS/2)
value (OS/2) Linux ext2 attrs
------------------------------------------------
0x00010000 IFJOURNAL -
0x00020000 ISPARSE used
0x00040000 INLINEEA used
0x00080000 - - JFS_NOATIME_FL
0x00100000 - - JFS_DIRSYNC_FL
0x00200000 - - JFS_SYNC_FL
0x00400000 - - JFS_SECRM_FL
0x00800000 ISWAPFILE - JFS_UNRM_FL
0x01000000 - - JFS_APPEND_FL
0x02000000 IREADONLY - JFS_IMMUTABLE_FL
0x04000000 IHIDDEN - -
0x08000000 ISYSTEM - -
0x10000000 - -
0x20000000 IDIRECTORY used
0x40000000 IARCHIVE -
0x80000000 INEWNAME -
the implementation is straight forward, except
for the fact that the attributes have to be mapped
to match with the ext2 ones to avoid a separate
tool for manipulating them (this could be avoided
when using a separate flag field in the on-disk
representation, but the overhead is minimal)
a special jfs_ioctl is added to allow for the new
JFS_IOC_GETFLAGS and JFS_IOC_SETFLAGS calls.
a helper function jfs_set_inode_flags() to transfer
the flags from the on-disk version to the inode
minor changes to allow flag inheritance on inode
creation, as well as a cleanup of the on-disk
flags (including the new ones)
beforementioned helper to map between ext2 and jfs
versions of the new flags ...
the JFS_SECRM_FL and JFS_UNRM_FL are not done yet
and I'm not 100% sure they are worth the effort,
the rest seems to work out of the box ...
Signed-off-by: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
- Use new AC_ERR_* flags as done in Tejun's patches
- In ata_qc_timeout(), replace ac_err_mask(drv_stat) with AC_ERR_TIMEOUT.
This makes time out handler always report error to upper layer.
Otherwise if the drv_stat looks good, libata might falsely report OK to the upper layer.
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
===
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
- Use new ata_queue_pio_task() for PIO polling task.
- Remove the unused ata_queue_packet_task() function.
(irq-pio had merged the 2 queues into one.)
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
===
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This patch implements the off-the-shelf probeinit component operation.
Currently, all it does is waking up the PHY if it's a SATA port.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This patch adds probeinit component operation to
ata_drive_probe_reset(). If present, this new operation is called
before performing any reset. The operations's roll is to prepare @ap
for following probe-reset operations.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This patch separates out sata_phy_resume() from sata_std_hardreset().
The function will later be used by probeinit callback.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ap->cbl is initialized during postreset and thus unknown on entry to
ata_std_probe_reset(). This patch makes ata_std_probe_reset() use
ATA_FLAG_SATA flag instead of ap->cbl to detect SATA port.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
This patch makes sure that pio tasks are flushed before proceeding
with EH.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
ATA_FLAG_IN_EH flag is set on entry to EH and cleared on completion.
This patch just sets and clears the flag. Following patches will
build normal qc execution / EH synchronization aroung this flag.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Swap out pselect6/ppoll for ni_syscall for now. We also have to switch
the macro to ENTRY_SAME since compat_sys_ni_syscall does not exist.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Use seq_file interface for proc output in sba_iommu. Also
clean up the bus root assignment, and give the proc files
a more logical name. Tested on my J6000.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
Gut ccio-dma.c of the ugly proc append and snprintf cruft and
just use seq_printf instead. Tested on a K-class.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
If you set network interface down and up again, the IPv6 address
autoconfiguration does not work. 'ip addr' shows that the link-local
address is in tentative state. We don't even react to periodical router
advertisements.
During NETDEV_DOWN we clear IF_READY, and we don't set it back in
NETDEV_UP. While starting to perform DAD on the link-local address, we
notice that the device is not in IF_READY, and we abort autoconfiguration
process (which would eventually send router solicitations).
Acked-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Registers system call for the ia64 architecture.
Reserves space for ppoll and pselect, and adds unshare at system
call number 1296.
Signed-off-by: Janak Desai <janak@us.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Patch from Tony Lindgren
This patch fixes the low-level IO init for omap2 boards.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Tony Lindgren
This patch fixes the low-level IO init for omap1 boards.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Tony Lindgren
This patch adds the missing cache flushes to common low-level
init that are needed to access the IO region. These flushes
are normally done at the end of devicemaps_init(), but we
need to detect the OMAP core type early.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Ben Dooks
Change the IRQ resource range for the ADC device
to be two distinct IRQs
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On some embedded PowerPC (MPC834x) systems an extra byte would some
times be required to flush data out of the fifo.
serial8250_console_write() was updating the IER in hardware without
also updating the copy in uart_8250_port. This causes issues functions
like serial8250_start_tx() and __stop_tx() to misbehave.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Catalin Marinas
Because of a type, OSC1 was used for setting the display clock instead of
OSC4. This patch fixes it.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patch from Nicolas Pitre
Since:
if (unlikely(__res || __ex_flag))
produces worse code on ARM than:
if (unlikely(__res | __ex_flag))
I therefore made it more explicit:
__res |= __ex_flag;
if (unlikely(__res != 0))
so it is not seen as a typo again.
Also made everything static inline rather than macros for better readability
(both produce the same code after all).
And finally added missing \t from multi-line assembly code.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
negative
Patch from Nicolas Pitre
The pre ARMv5 implementation can be aborted if an exception occurs in
the middle of it. Because of that, the ARMv6 implementation doesn't
re-attempt the operation on a failed strex either. Let's make this
transient nature of such a false positive more explicit in the
definition.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
