This reverts commit 9722955b54.
It breaks the genfs use-case for bpffs which is what Android uses. It
can be restored later once a solution is reached upstream.
Bug: 529733987
Change-Id: I2f41e047fd77fc3a5b1c223caee4fc2bcfdf02cd
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Pull power management updates from Rafael Wysocki:
"Over a half of the changes here are cpufreq updates that include core
modifications, fixes of the old-style governors, new hardware support
in drivers, assorded driver fixes and cleanups, and the removal of one
driver (AMD Elan SC4*).
Apart from that, the intel_idle driver will now be able to avoid
exposing redundant C-states if PC6 is disabled and there are new
sysctl knobs for device suspend/resume watchdog timeouts, hibernation
gets built-in LZ4 support for image compression and there is the usual
collection of assorted fixes and cleanups.
Specifics:
- Fix a race between cpufreq suspend and CPU hotplug during system
shutdown (Tianxiang Chen)
- Avoid redundant target() calls for unchanged limits and fix a typo
in a comment in the cpufreq core (Viresh Kumar)
- Fix concurrency issues related to sysfs attributes access that
affect cpufreq governors using the common governor code (Zhongqiu
Han)
- Simplify frequency limit handling in the conservative cpufreq
governor (Lifeng Zheng)
- Fix descriptions of the conservative governor freq_step tunable and
the ondemand governor sampling_down_factor tunable in the cpufreq
documentation (Pengjie Zhang)
- Fix use-after-free and double free during _OSC evaluation in the
PCC cpufreq driver (Yuho Choi)
- Rework the handling of policy min and max frequency values in the
cpufreq core to allow drivers to specify special initial values for
the scaling_min_freq and scaling_max_freq sysfs attributes (Pierre
Gondois)
- Add cpufreq scaling support for Qualcomm Shikra SoC (Taniya Das,
Imran Shaik).
- Improve the warning message on HWP-disabled hybrid processors
printed by the intel_pstate driver and sync policy->cur during CPU
offline in it (Yohei Kojima, Fushuai Wang)
- Drop cpufreq support for AMD Elan SC4* (Sean Young)
- Minor fixes for cpufreq drivers (Krzysztof Kozlowski, Akashdeep
Kaur, Hans Zhang, Guangshuo Li, Xueqin Luo)
- Clean up dead dependencies on X86 in the cpufreq Kconfig (Julian
Braha)
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init()
to avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during
hibernation image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression
(l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the
intel_rapl power capping driver and use sysfs_emit() in
cpumask_show() in that driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)"
* tag 'pm-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: QoS: Fix misc device registration unwind
cpufreq: Use policy->min/max init as QoS request
cpufreq: Remove driver default policy->min/max init
cpufreq: Set default policy->min/max values for all drivers
cpufreq: Extract cpufreq_policy_init_qos() function
cpufreq: Documentation: fix conservative governor freq_step description
cpufreq: ti: Add EPROBE_DEFER for K3 SoCs
cpufreq: qcom: Add cpufreq scaling support for Qualcomm Shikra SoC
dt-bindings: cpufreq: Document Qualcomm Shikra SoC EPSS
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
cpufreq: governor: Fix stale prev_cpu_nice spike when enabling ignore_nice_load
cpufreq: governor: Fix data races on per-CPU idle/nice baselines
PM: hibernate: Use flexible array for CRC uncompressed buffers
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
opp: rust: mark OPP methods as inline
cpufreq: intel_pstate: Improve warning message on HWP-disabled hybrid CPUs
cpufreq: elanfreq: Drop support for AMD Elan SC4*
...
Pull RCU updates from Uladzislau Rezki:
"Torture test updates:
- Improve kvm-series.sh script by adding examples in its header
comment
- Lazy RCU is more fully tested now by replacing call_rcu_hurry()
with call_rcu() and doing rcu_barrier() to motivate lazy callbacks
during a stutter pause
- Add more synonyms for the "--do-normal" group of torture.sh
command-line arguments
Misc changes:
- Reduce stack usage of nocb_gp_wait() to address frame size warning
when built with CONFIG_UBSAN_ALIGNMENT
- The synchronize_rcu() call can detect the flood and latches a
normal/default path temporary switching to wait_rcu_gp() path
- Document using rcu_access_pointer() to fetch the old pointer for
lockless cmpxchg() updates
- Simplify some RCU code using clamp_val()
- Fix a kerneldoc header comment typo in srcu_down_read_fast()"
* tag 'rcu.release.v7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: reduce stack usage in nocb_gp_wait()
rcu-tasks: Fix possible boot-time tests failed for the call_rcu_tasks()
rcu: Latch normal synchronize_rcu() path on flood
rcu: Document rcu_access_pointer() feeding into cmpxchg()
rcu: Simplify param_set_next_fqs_jiffies() by applying clamp_val()
rcu: Simplify rcu_do_batch() by applying clamp()
checkpatch: Undeprecate rcu_read_lock_trace() and rcu_read_unlock_trace()
srcu: Fix kerneldoc header comment typo in srcu_down_read_fast()
torture: Allow "norm" abbreviation for "normal"
torture: Improve kvm-series.sh header comment
torture: Add torture_sched_set_normal() for user-specified nice values
rcutorture: Fully test lazy RCU
Pull procfs updates from Christian Brauner:
- Revamp fs/filesystems.c
The file was a mess with a hand-rolled linked list in desperate need
of a cleanup. The filesystems list is now RCU-ified, /proc files can
be marked permanent from outside fs/proc/, and the string emitted
when reading /proc/filesystems is pre-generated and cached instead of
pointer-chasing and printfing entry by entry on every read.
The file is read frequently because libselinux reads it and is linked
into numerous frequently used programs (even ones you would not
suspect, like sed!). Scalability also improves since reference
maintenance on open/close is bypassed.
open+read+close cycle single-threaded (ops/s):
before: 442732
after: 1063462 (+140%)
open+read+close cycle with 20 processes (ops/s):
before: 606177
after: 3300576 (+444%)
A follow-up patch adds missing unlocks in some corner cases and
tidies things up.
- Relax the mount visibility check for subset=pid mounts
When procfs is mounted with subset=pid, all static files become
unavailable and only the dynamic pid information is accessible. In
that case there is no point in imposing the full mount visibility
restrictions on the mounter - everything that can be hidden in procfs
is already inaccessible. These restrictions prevented procfs from
being mounted inside rootless containers since almost all container
implementations overmount parts of procfs to hide certain
directories.
As part of this /proc/self/net is only shown in subset=pid mounts for
CAP_NET_ADMIN, reconfiguring subset=pid is rejected, the
SB_I_USERNS_VISIBLE superblock flag is replaced with an
FS_USERNS_MOUNT_RESTRICTED filesystem flag, fully visible mounts are
recorded in a list, and the mount restrictions are finally
documented.
- Protect ptrace_may_access() with exec_update_lock in procfs
Most uses of ptrace_may_access() in procfs should hold
exec_update_lock to avoid TOCTOU issues with concurrent privileged
execve() (like setuid binary execution).
This fixes the easy cases - the owner and visibility checks and the
FD link permission checks - with the gnarlier ones to follow later.
* tag 'vfs-7.2-rc1.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix ups and tidy ups to /proc/filesystems caching
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc: protect ptrace_may_access() with exec_update_lock (part 1)
docs: proc: add documentation about mount restrictions
proc: handle subset=pid separately in userns visibility checks
proc: prevent reconfiguring subset=pid
proc: subset=pid: Show /proc/self/net only for CAP_NET_ADMIN
fs: cache the string generated by reading /proc/filesystems
sysfs: remove trivial sysfs_get_tree() wrapper
fs: RCU-ify filesystems list
fs: move SB_I_USERNS_VISIBLE to FS_USERNS_MOUNT_RESTRICTED
proc: allow to mark /proc files permanent outside of fs/proc/
namespace: record fully visible mounts in list
Pull simple_xattr updates from Christian Brauner:
"This reworks the simple xattr api to make it more efficient and easier
to use for all consumers.
The simple_xattr hash table moves from the inode into a per-superblock
cache, removing the per-inode overhead for the common case of few or
no xattrs. The interface now passes struct simple_xattrs ** so lazy
allocation is handled internally instead of by every caller, kernfs
xattr operations on kernfs nodes shared between multiple superblocks
are properly serialized, and tmpfs constructs "security.foo" xattr
names with kasprintf() instead of kmalloc() plus two memcpy()s.
A follow-up fix links kernfs nodes to their parent before the LSM init
hook runs: with the per-sb cache kernfs_xattr_set() computes the cache
via kernfs_root(kn), which faulted on a freshly allocated node when
selinux_kernfs_init_security() called into it - reproducible as a NULL
pointer dereference on the first cgroup mkdir on SELinux-enabled
systems.
On top of this bpffs gains support for trusted.* and security.* xattrs
so that user space and BPF LSM programs can attach metadata - for
example a content hash or a security label - to pinned objects and
directories and inspect it uniformly like on other filesystems. The
store is in-memory and non-persistent, living only for the lifetime of
the mount like everything else in bpffs"
* tag 'vfs-7.2-rc1.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
bpf: Add simple xattr support to bpffs
kernfs: link kn to its parent before the LSM init hook
simpe_xattr: use per-sb cache
simple_xattr: change interface to pass struct simple_xattrs **
tmpfs: simplify constructing "security.foo" xattr names
kernfs: fix xattr race condition with multiple superblocks
Pull task_exec_state updates from Christian Brauner:
"This introduces a new per-task task_exec_state structure and relocates
the dumpable mode and the user namespace captured at execve() from
mm_struct onto it. It stays attached to the task for its full
lifetime.
__ptrace_may_access() and several /proc owner and visibility checks
need to consult two pieces of state for any observable task, including
zombies that have already gone through exit_mm(): the dumpable mode
and the user namespace captured at execve(). Both live on mm_struct
today, which exit_mm() clears from the task long before the task is
reaped. A reader that races with do_exit() observes task->mm == NULL
and either fails the check or falls back to init_user_ns - which
denies legitimate access to non-dumpable zombies that were running in
a nested user namespace.
mm_struct loses ->user_ns and the dumpability bits in ->flags.
MMF_DUMPABLE_BITS is reserved so the MMF_DUMP_FILTER_* layout exposed
via /proc/<pid>/coredump_filter stays stable. task->user_dumpable and
its exit_mm() snapshot are removed.
task_exec_state is the privilege domain established by an execve().
Within a thread group it is shared via refcount; across thread groups
each task has its own:
- CLONE_VM siblings (thread-group members, io_uring workers)
refcount-share the parent's exec_state.
- Non-CLONE_VM clones (fork(), vfork() without CLONE_VM) allocate a
fresh exec_state inheriting the parent's dumpable mode and user_ns.
- execve() in the child allocates a fresh instance and installs it
under task_lock + exec_update_lock via task_exec_state_replace().
- Credential changes (setresuid, capset, ...) and
prctl(PR_SET_DUMPABLE) update dumpability on the current task's
exec_state, i.e., on the thread group's shared instance.
On top of this exec_mmap() no longer tears down the old mm while
holding exec_update_lock for writing and cred_guard_mutex. Neither
lock is needed for that: exec_update_lock only exists to make the mm
swap atomic with the later commit_creds() and all its readers operate
on the new mm; none looks at the detached old mm.
The cost was real: __mmput() runs exit_mmap() over the entire old
address space and can block in exit_aio() waiting for in-flight AIO,
so execve() of a large process blocked ptrace_attach() and every
exec_update_lock reader for the duration of the teardown.
The old mm is now stashed in bprm->old_mm and released from
setup_new_exec() after both locks are dropped, with a backstop in
free_bprm() for the error paths"
* tag 'kernel-7.2-rc1.task_exec_state' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exec: free the old mm outside the exec locks
exec_state: relocate dumpable information
ptrace: add ptracer_access_allowed()
exec: introduce struct task_exec_state
sched/coredump: introduce enum task_dumpable
Pull dma-mapping fix from Marek Szyprowski:
"Three more fixes for the DMA-mapping code, related to PCI P2PDMA, DMA
debug and DMA link ranges API (Li RongQing and Jason Gunthorpe)"
* tag 'dma-mapping-7.1-2026-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
dma-debug: fix physical address retrieval in debug_dma_sync_sg_for_device
dma-mapping: direct: fix missing mapping for THRU_HOST_BRIDGE segments
Merge updates related to system sleep support, two updates of the
intel_rapl power capping driver, and a pm-graph utility fix for
7.2-rc1:
- Add sysctl interface for DPM watchdog timeouts (Tzung-Bi Shih)
- Use complete() instead of complete_all() in device_pm_sleep_init() to
avoid a false-positive warning from lockdep_assert_RT_in_threaded_ctx()
when CONFIG_PROVE_RAW_LOCK_NESTING is enabled (Jiakai Xu)
- Use a flexible array for CRC uncompressed buffers during hibernation
image saving (Rosen Penev)
- Make the LZ4 algorithm available for hibernation compression (l1rox3)
- Move the preallocate_image() call during hibernation after the
"prepare" phase of the "freeze" transition (Matthew Leach)
- Fix a memory leak in rapl_add_package_cpuslocked() in the intel_rapl
power capping driver and use sysfs_emit() in cpumask_show() in that
driver (Sumeet Pawnikar, Yury Norov)
- Fix ValueError when parsing incomplete device properties in the
pm-graph utility (Gongwei Li)
* pm-sleep:
PM: dpm_watchdog: Add sysctl interface for DPM watchdog timeouts
PM: hibernate: Use flexible array for CRC uncompressed buffers
PM: hibernate: make LZ4 available for hibernation compression
PM: sleep: Use complete() in device_pm_sleep_init()
PM: hibernate: call preallocate_image() after freeze prepare
* pm-powercap:
powercap: intel_rapl: Use sysfs_emit() in cpumask_show()
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
* pm-tools:
PM: tools: pm-graph: fix ValueError when parsing incomplete device properties
Merge cpuidle updates, OPP (operating performance points) updates and a
PM QoS update for 7.2-rc1:
- Allow the intel_idle driver to avoid exposing C-states that are
redundant when PC6 is disabled (Artem Bityutskiy)
- Fix memory leak and a potential race in the OPP core (Abdun Nihaal,
Di Shen)
- Mark Rust OPP methods as inline (Nicolás Antinori)
- Fix misc device registration failure path in the PM QoS core (Yuho
Choi)
* pm-cpuidle:
intel_idle: Drop C-states redundant when PC6 is disabled
intel_idle: Introduce a helper for checking PC6
intel_idle: Add constants for MSR_PKG_CST_CONFIG_CONTROL
* pm-opp:
opp: rust: mark OPP methods as inline
OPP: of: Fix potential memory leak in opp_parse_supplies()
OPP: Fix race between OPP addition and lookup
* pm-qos:
PM: QoS: Fix misc device registration unwind
Pull runtime verifier fixes from Steven Rostedt:
- Fix reset ordering on per-task destruction
Reset the task before dropping the slot instead of after, which was
causing out-of-bound memory accesses.
- Fix HA monitor synchronization and cleanup
Ensure synchronous cleanup for HA monitors by running timer callbacks
in RCU read-side critical sections and using synchronize_rcu() during
destruction.
- Avoid armed timers after tasks exit
Add automatic cleanup for per-task HA monitors to prevent timers from
firing after task exit.
- Fix memory ordering for DA/HA monitors
Fix race conditions during monitor start by using release-acquire
semantics for the monitoring flag.
- Fix initialization for DA/HA monitors
Ensure monitors are not initialized relying on potentially corrupted
state like the monitoring flag, that is not reset by all monitors
type and may have an unknown state in monitors reusing the storage
(per-task).
- Fix memory safety in per-task and per-object monitors
Prevent use-after-free and out-of-bounds access by synchronizing with
in-flight tracepoint probes using tracepoint_synchronize_unregister()
before freeing monitor storage or releasing task slots.
- Adjust monitors for preemptible tracepoints
Fix monitors that relied on tracepoints disabling preemption.
Explicitly disable task migration when per-CPU monitors handle events
to avoid accessing the wrong state and update the opid monitor logic.
- Fix incorrect __user specifier usage
Remove __user from a non-pointer variable in the extract_params()
helper.
- Fix bugs in the rv tool
Ensure strings are NUL-terminated, fix substring matching in monitor
searches, and improve cleanup and exit status handling.
- Fix several bugs in rvgen
Fix LTL literal stringification, subparsers' options handling, and
suffix stripping in dot2k.
* tag 'trace-rv-v7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/rvgen: Fix ltl2k writing True as a literal
verification/rvgen: Fix options shared among commands
verification/rvgen: Fix suffix strip in dot2k
tools/rv: Fix cleanup after failed trace setup
tools/rv: Fix substring match when listing container monitors
tools/rv: Fix substring match bug in monitor name search
tools/rv: Ensure monitor name and desc are NUL-terminated
rv: Use 0 to check preemption enabled in opid
rv: Prevent task migration while handling per-CPU events
rv: Ensure synchronous cleanup for HA monitors
rv: Add automatic cleanup handlers for per-task HA monitors
rv: Do not rely on clean monitor when initialising HA
rv: Fix monitor start ordering and memory ordering for monitoring flag
rv: Ensure all pending probes terminate on per-obj monitor destroy
rv: Prevent in-flight per-task handlers from using invalid slots
rv: Reset per-task DA monitors before releasing the slot
rv: Fix __user specifier usage in extract_params()
cpu_latency_qos_init() registers cpu_dma_latency first and, when
CONFIG_PM_QOS_CPU_SYSTEM_WAKEUP is enabled, registers cpu_wakeup_latency
afterwards. The second registration overwrites the first return value.
As a result, a failure to register cpu_dma_latency can be masked if the
second registration succeeds. Conversely, if cpu_dma_latency succeeds and
cpu_wakeup_latency fails, the function returns an error while leaving the
first misc device registered.
Return immediately on the first registration failure and deregister
cpu_dma_latency if the second registration fails.
Fixes: a4e6512a79 ("PM: QoS: Introduce a CPU system wakeup QoS limit")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Link: https://patch.msgid.link/20260608170748.82273-1-dbgh9129@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull timer fixes from Ingo Molnar:
- Fix the arch_inlined_clockevent_set_next_coupled() prototype in the
!CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST case (Naveen Kumar Chaudhary)
- Fix an off-by-1 bug in the sys_settimeofday() usecs validation code
(Naveen Kumar Chaudhary)
- Mark vdso_k_*_data pointers as __ro_after_init (Thomas Weißschuh)
- Fix livelock race in tmigr_handle_remote_up() (Amit Matityahu)
* tag 'timers-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Fix livelock in tmigr_handle_remote_up()
vdso/datastore: Mark vdso_k_*_data pointers as __ro_after_init
time: Fix off-by-one in settimeofday() usec validation
clockevents: Fix duplicate type specifier in stub function parameter
Pull locking fixes from Ingo Molnar:
- Fix a NULL pointer dereference bug in the FUTEX_CMP_REQUEUE_PI
code (Ji'an Zhou)
- Fix a NULL pointer dereference bug in the rtmutex code (Davidlohr
Bueso)
* tag 'locking-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Skip remove_waiter() when waiter is not enqueued
futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock
Pull vfs fixes from Christian Brauner:
- Fix error handling in ovl_cache_get()
- Tighten access checks for exited tasks in pidfd_getfd()
- Fix selftests leak in __wait_for_test()
- Limit FUSE_NOTIFY_RETRIEVE to uptodate folios
- Reject fuse_notify() pagecache ops on directories
- Clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
- Fix failure to unlock in nfsd4_create_file()
- Fix pointer arithmetic in qnx6 directory iteration
- Fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
- Avoid potential null folio->mapping deref during iomap error
reporting
* tag 'vfs-7.1-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: avoid potential null folio->mapping deref during error reporting
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
fs/qnx6: fix pointer arithmetic in directory iteration
VFS: fix possible failure to unlock in nfsd4_create_file()
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
fuse: reject fuse_notify() pagecache ops on directories
fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios
selftests: harness: fix pidfd leak in __wait_for_test
pidfd: refuse access to tasks that have started exiting harder
ovl: keep err zero after successful ovl_cache_get()
Add support for extended attributes on bpffs inodes so that user space
and BPF LSM programs can attach metadata, for example, a content hash
or a security label - to a pinned object or directory. BPF LSM or user
space tooling can then uniformly look at this (e.g. security.bpf.*) in
similar way to other fs'es. The store is in-memory and non-persistent:
it lives only for the lifetime of the mount, like everything else in
bpffs. The modelling is similar to tmpfs.
bpffs serves the trusted.* and security.* namespaces; user.* is left
unsupported. As bpffs is FS_USERNS_MOUNT, security.* is reachable by
the unprivileged mounter in a user namespace, and thus we are using
the simple_xattr_set_limited infra there (trusted.* needs global
CAP_SYS_ADMIN).
bpf_fill_super() is open-coded instead of using simple_fill_super(),
because the root inode must now be allocated through bpf_fs_alloc_inode()
i.e. carry the bpf_fs_inode wrapper and come from the right cache -
which requires s_op (and s_xattr) to be installed before the first
inode is created. While at it, also harden s_iflags with SB_I_NOEXEC
and SB_I_NODEV.
bpf_fs_listxattr() is only reachable through the filesystem via
i_op->listxattr, so the BPF token inode is left untouched. Name-based
fsetxattr()/fgetxattr() on a token fd still work since the get/set
handlers are installed at the superblock.
For security.* namespace, we use simple_xattr_set_limited() but
there was no simple_xattr_add_limited() API yet which was needed
in bpf_fs_initxattrs() to avoid underflows in the accounting. The
symlink target is freed in bpf_free_inode() rather than in
bpf_destroy_inode() so that it is released only after an RCU grace
period, as an RCU path walk following the symlink may still
dereference inode->i_link in security_inode_follow_link(). Lastly,
the bpf_symlink() allocated the symlink target is switched to
GFP_KERNEL_ACCOUNT, so the string is charged to the caller's memcg.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260602074012.416289-1-daniel@iogearbox.net
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Pull tracing/probes fix from Masami Hiramatsu:
"Fix the eprobe event parser to point error position correctly"
* tag 'probes-fixes-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Point the error offset correctly for eprobe argument error
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ]
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Reported-by: Alon Kariv <alonka@amazon.com>
Signed-off-by: Amit Matityahu <amitmat@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260603170139.33628-1-amitmat@amazon.com
When signed module protection is enabled, do not taint the kernel upon
loading an unsigned module.
Bug: 519119852
Change-Id: I10a776984efd420d2fbd9d75ccd9c85b1bf50e9d
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
The module loader will check each unsigned module's exported symbols
against protected exports section. If a match is found, the module will
be rejected and fail to load.
Bug: 519119852
Change-Id: I0e08acdc2c0251da37165fbf397c8cabfcee5122
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
MODULE_SIG_PROTECT_LIST - list of modules whose exports to protect
MODULE_SIG_PROTECT - readonly, set automatically based on the value of
MODULE_SIG_PROTECT_LIST; used for determining whether symbol exportion
is enabled in scripts, Makefiles and preprocessor directives
Bug: 519119852
Change-Id: I3b406078b41558da098000853d1b4a5642f73663
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
The module loader will reject unsigned modules from loading if such a
module attempts to import a symbol which has the import protection bit
set in the kflagstab entry for the symbol.
Bug: 519119852
Change-Id: I3fdbc3744bab6013b46ecd4c4c7b2cf68a1cbaea
Signed-off-by: Siddharth Nayyar <sidnayyar@google.com>
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936 ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().
Fixes: 3bfdc63936 ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Reported-by: syzbot+78147abe6c524f183ee9@syzkaller.appspotmail.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/69f114ac.050a0220.ac8b.0003.GAE@google.com/
Link: https://patch.msgid.link/20260507112913.1019537-1-dave@stgolabs.net
Pull cgroup fixes from Tejun Heo:
"One cpuset fix and a maintenance update, both low-risk:
- Fix cpuset partition CPU accounting under sibling CPU exclusion
that could produce wrong CPU assignments and trigger
scheduling-domain warnings. Includes selftests.
- Update an email address in MAINTAINERS"
* tag 'cgroup-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Change Ridong's email
cgroup/cpuset: Add test cases for sibling CPU exclusion on partition update
cgroup/cpuset: Use effective_xcpus in partcmd_update add/del mask calculation
Pull sched_ext fixes from Tejun Heo:
"Two low-risk fixes:
- Drop a spurious warning that can fire during cgroup migration while
a sched_ext scheduler is loaded
- Fix a drgn-based debug script that broke after scheduler state
moved into a per-scheduler struct"
* tag 'sched_ext-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
tools/sched_ext: Fix scx_show_state per-scheduler state reads
In debug_dma_sync_sg_for_device(), when iterating over a scatterlist,
the debug entry population mistakenly uses the head of the scatterlist
'sg' to fetch the physical address via sg_phys(), instead of using the
current iterator variable 's'.
This causes dma-debug to track the physical address of the very first
scatterlist entry for all subsequent entries in the list.
Fix this by passing the correct loop iterator 's' to sg_phys()
Fixes: 9d4f645a1f ("dma-debug: store a phys_addr_t in struct dma_debug_entry")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260603123708.1665-1-lirongqing@baidu.com
Tracepoint handlers no longer run with preemption disabled by default
since a46023d561 ("tracing: Guard __DECLARE_TRACE() use of
__DO_TRACE_CALL() with SRCU-fast"), the opid monitor should now count 1
in the preemption count as preemption disabled.
Change the rule for preempt_off to preempt > 0.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-11-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Hybrid automata monitors may start timers, depending on the model, these
may remain active on an exiting task and cause false positives or even
access freed memory.
Add an enable/disable hook in the HA code, currently only populated by
the per-task handler for registration and deregistration.
This hooks to the sched_process_exit event and ensures the timer is
stopped for every exiting task. The handler is enabled automatically but
may be disabled, for instance if the monitor uses the event for another
purpose (but should still manually ensure timers are stopped).
Fixes: f5587d1b6e ("rv: Add Hybrid Automata monitor type")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
In dma_direct_map_sg(), the case PCI_P2PDMA_MAP_THRU_HOST_BRIDGE
incorrectly used 'break' instead of falling through to MAP_NONE.
As a result, segments traversing the host bridge skipped the required
dma_direct_map_phys() call entirely, leaving sg->dma_address
uninitialized and leading to DMA failures. Fix this by using
'fallthrough;'.
Fixes: a25e7962db ("PCI/P2PDMA: Refactor the p2pdma mapping helpers")
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260603013723.2439-1-lirongqing@baidu.com
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired.
Fixes: 8195136669 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Closes: https://lore.kernel.org/all/20260601124156.2205704-1-mfleming@cloudflare.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
When FUTEX_CMP_REQUEUE_PI requeues a non-top waiter that already owns the
target PI futex, task_blocks_on_rt_mutex() returns -EDEADLK before setting
waiter->task.
The subsequent remove_waiter() in rt_mutex_start_proxy_lock() dereferences
the NULL waiter->task, causing a kernel crash.
Add a self-deadlock check for non-top waiters before calling
rt_mutex_start_proxy_lock(), analogous to the top-waiter check in
futex_lock_pi_atomic().
Fixes: 3bfdc63936 ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Signed-off-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
The validation check uses '>' instead of '>=' when comparing tv_usec
against USEC_PER_SEC, allowing the value 1000000 through. After
conversion to nanoseconds (*= 1000), this produces tv_nsec ==
NSEC_PER_SEC, violating the timespec invariant that tv_nsec must be
less than NSEC_PER_SEC.
Use '>=' to reject tv_usec values that are not in the valid range of
0 to 999999.
Fixes: 5e0fb1b57b ("y2038: time: avoid timespec usage in settimeofday()")
Signed-off-by: Naveen Kumar Chaudhary <naveen.osdev@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/4rikk44zew3s6577dugmx4jyblz7o5c57niuap6ct3td5yfm6w@gh7pcumg7qor
The stub for arch_inlined_clockevent_set_next_coupled() has 'u64 u64
cycles' in its parameter list. Since u64 is a typedef, the compiler
parses the second 'u64' as the parameter name, making 'cycles' an
unused token. Remove the duplicate so the parameter is correctly named.
Fixes: 89f951a1e8 ("clockevents: Provide support for clocksource coupled comparators")
Signed-off-by: Naveen Kumar Chaudhary <naveen.osdev@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/7tostpvxzdn6tobmyow63a5rweatls5kux3scqp2vzhe7mv6uq@ecr746b4hyhf
When CONFIG_UBSAN_ALIGNMENT is enabled, the stack usage of nocb_gp_wait()
grows above typical warning limits:
In file included from kernel/rcu/tree.c:4930:
kernel/rcu/tree_nocb.h: In function 'rcu_nocb_gp_kthread':
kernel/rcu/tree_nocb.h:866:1: error: the frame size of 1968 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Apparently, the problem is passing rcu_data from a 'void *' pointer,
which gcc assumes may be misaligned. When the function is not inlined
into rcu_nocb_gp_kthread(), that is no longer visible to gcc.
Add a 'noinline_for_stack' annotation that leads to skipping a lot of
the alignment sanitizer checks and keeps the stack usage 60% lower here.
Reviewed-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Carlos Llamas
Maciej Żenczykowski
Linus Torvalds
Rafael J. Wysocki
Yuho Choi
Daniel Borkmann
Amit Matityahu
Siddharth Nayyar
Davidlohr Bueso
Li RongQing
Gabriele Monaco
Tejun Heo
Ji'an Zhou
Naveen Kumar Chaudhary
Uladzislau Rezki (Sony)
Arnd Bergmann