8f0a5b31aee19510e75741c9687cf0d9321fa7ed
1106
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Carlos Llamas
|
8f0a5b31ae |
FROMGIT: selinux: bpf: check SBLABEL_MNT before isec init
selinux_inode_init_security() marks the isec as initialized before checking if mount labeling is supported (SBLABEL_MNT). This was fine until commit |
||
 Stephen Smalley
|
f92d542577 |
selinux: fix avdcache auditing
The per-task avdcache was incorrectly saving and reusing the
audited vector computed by avc_audit_required() rather than
recomputing based on the currently requested permissions and
distinguishing the denied versus allowed cases. As a result,
some permission checks were not being audited, e.g.
directory write checks after a previously cached directory
search check.
Cc: stable@vger.kernel.org
Fixes:
|
||
 David Windsor
|
1e5a8eed78 |
selinux: don't reserve xattr slot when we won't fill it
Move lsm_get_xattr_slot() below the SBLABEL_MNT check so we don't leave a NULL-named slot in the array when returning -EOPNOTSUPP; filesystem initxattrs() callbacks stop iterating at the first NULL ->name, silently dropping xattrs installed by later LSMs. Cc: stable@vger.kernel.org Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
 Zongyao Chen
|
032e70aff0 |
selinux: use sk blob accessor in socket permission helpers
SELinux socket state lives in the composite LSM socket blob.
sock_has_perm() and nlmsg_sock_has_extended_perms() currently
dereference sk->sk_security directly, which assumes the SELinux socket
blob is at offset zero.
In stacked configurations that assumption does not hold. If another LSM
allocates socket blob storage before SELinux, these helpers may read the
wrong blob and feed invalid SID and class values into AVC checks.
Use selinux_sock() instead of accessing sk->sk_security directly.
Fixes:
|
||
 Linus Torvalds
|
334fbe734e |
Merge tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton: - "maple_tree: Replace big node with maple copy" (Liam Howlett) Mainly prepararatory work for ongoing development but it does reduce stack usage and is an improvement. - "mm, swap: swap table phase III: remove swap_map" (Kairui Song) Offers memory savings by removing the static swap_map. It also yields some CPU savings and implements several cleanups. - "mm: memfd_luo: preserve file seals" (Pratyush Yadav) File seal preservation to LUO's memfd code - "mm: zswap: add per-memcg stat for incompressible pages" (Jiayuan Chen) Additional userspace stats reportng to zswap - "arch, mm: consolidate empty_zero_page" (Mike Rapoport) Some cleanups for our handling of ZERO_PAGE() and zero_pfn - "mm/kmemleak: Improve scan_should_stop() implementation" (Zhongqiu Han) A robustness improvement and some cleanups in the kmemleak code - "Improve khugepaged scan logic" (Vernon Yang) Improve khugepaged scan logic and reduce CPU consumption by prioritizing scanning tasks that access memory frequently - "Make KHO Stateless" (Jason Miu) Simplify Kexec Handover by transitioning KHO from an xarray-based metadata tracking system with serialization to a radix tree data structure that can be passed directly to the next kernel - "mm: vmscan: add PID and cgroup ID to vmscan tracepoints" (Thomas Ballasi and Steven Rostedt) Enhance vmscan's tracepointing - "mm: arch/shstk: Common shadow stack mapping helper and VM_NOHUGEPAGE" (Catalin Marinas) Cleanup for the shadow stack code: remove per-arch code in favour of a generic implementation - "Fix KASAN support for KHO restored vmalloc regions" (Pasha Tatashin) Fix a WARN() which can be emitted the KHO restores a vmalloc area - "mm: Remove stray references to pagevec" (Tal Zussman) Several cleanups, mainly udpating references to "struct pagevec", which became folio_batch three years ago - "mm: Eliminate fake head pages from vmemmap optimization" (Kiryl Shutsemau) Simplify the HugeTLB vmemmap optimization (HVO) by changing how tail pages encode their relationship to the head page - "mm/damon/core: improve DAMOS quota efficiency for core layer filters" (SeongJae Park) Improve two problematic behaviors of DAMOS that makes it less efficient when core layer filters are used - "mm/damon: strictly respect min_nr_regions" (SeongJae Park) Improve DAMON usability by extending the treatment of the min_nr_regions user-settable parameter - "mm/page_alloc: pcp locking cleanup" (Vlastimil Babka) The proper fix for a previously hotfixed SMP=n issue. Code simplifications and cleanups ensued - "mm: cleanups around unmapping / zapping" (David Hildenbrand) A bunch of cleanups around unmapping and zapping. Mostly simplifications, code movements, documentation and renaming of zapping functions - "support batched checking of the young flag for MGLRU" (Baolin Wang) Batched checking of the young flag for MGLRU. It's part cleanups; one benchmark shows large performance benefits for arm64 - "memcg: obj stock and slab stat caching cleanups" (Johannes Weiner) memcg cleanup and robustness improvements - "Allow order zero pages in page reporting" (Yuvraj Sakshith) Enhance free page reporting - it is presently and undesirably order-0 pages when reporting free memory. - "mm: vma flag tweaks" (Lorenzo Stoakes) Cleanup work following from the recent conversion of the VMA flags to a bitmap - "mm/damon: add optional debugging-purpose sanity checks" (SeongJae Park) Add some more developer-facing debug checks into DAMON core - "mm/damon: test and document power-of-2 min_region_sz requirement" (SeongJae Park) An additional DAMON kunit test and makes some adjustments to the addr_unit parameter handling - "mm/damon/core: make passed_sample_intervals comparisons overflow-safe" (SeongJae Park) Fix a hard-to-hit time overflow issue in DAMON core - "mm/damon: improve/fixup/update ratio calculation, test and documentation" (SeongJae Park) A batch of misc/minor improvements and fixups for DAMON - "mm: move vma_(kernel|mmu)_pagesize() out of hugetlb.c" (David Hildenbrand) Fix a possible issue with dax-device when CONFIG_HUGETLB=n. Some code movement was required. - "zram: recompression cleanups and tweaks" (Sergey Senozhatsky) A somewhat random mix of fixups, recompression cleanups and improvements in the zram code - "mm/damon: support multiple goal-based quota tuning algorithms" (SeongJae Park) Extend DAMOS quotas goal auto-tuning to support multiple tuning algorithms that users can select - "mm: thp: reduce unnecessary start_stop_khugepaged()" (Breno Leitao) Fix the khugpaged sysfs handling so we no longer spam the logs with reams of junk when starting/stopping khugepaged - "mm: improve map count checks" (Lorenzo Stoakes) Provide some cleanups and slight fixes in the mremap, mmap and vma code - "mm/damon: support addr_unit on default monitoring targets for modules" (SeongJae Park) Extend the use of DAMON core's addr_unit tunable - "mm: khugepaged cleanups and mTHP prerequisites" (Nico Pache) Cleanups to khugepaged and is a base for Nico's planned khugepaged mTHP support - "mm: memory hot(un)plug and SPARSEMEM cleanups" (David Hildenbrand) Code movement and cleanups in the memhotplug and sparsemem code - "mm: remove CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE and cleanup CONFIG_MIGRATION" (David Hildenbrand) Rationalize some memhotplug Kconfig support - "change young flag check functions to return bool" (Baolin Wang) Cleanups to change all young flag check functions to return bool - "mm/damon/sysfs: fix memory leak and NULL dereference issues" (Josh Law and SeongJae Park) Fix a few potential DAMON bugs - "mm/vma: convert vm_flags_t to vma_flags_t in vma code" (Lorenzo Stoakes) Convert a lot of the existing use of the legacy vm_flags_t data type to the new vma_flags_t type which replaces it. Mainly in the vma code. - "mm: expand mmap_prepare functionality and usage" (Lorenzo Stoakes) Expand the mmap_prepare functionality, which is intended to replace the deprecated f_op->mmap hook which has been the source of bugs and security issues for some time. Cleanups, documentation, extension of mmap_prepare into filesystem drivers - "mm/huge_memory: refactor zap_huge_pmd()" (Lorenzo Stoakes) Simplify and clean up zap_huge_pmd(). Additional cleanups around vm_normal_folio_pmd() and the softleaf functionality are performed. * tag 'mm-stable-2026-04-13-21-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm: fix deferred split queue races during migration mm/khugepaged: fix issue with tracking lock mm/huge_memory: add and use has_deposited_pgtable() mm/huge_memory: add and use normal_or_softleaf_folio_pmd() mm: add softleaf_is_valid_pmd_entry(), pmd_to_softleaf_folio() mm/huge_memory: separate out the folio part of zap_huge_pmd() mm/huge_memory: use mm instead of tlb->mm mm/huge_memory: remove unnecessary sanity checks mm/huge_memory: deduplicate zap deposited table call mm/huge_memory: remove unnecessary VM_BUG_ON_PAGE() mm/huge_memory: add a common exit path to zap_huge_pmd() mm/huge_memory: handle buggy PMD entry in zap_huge_pmd() mm/huge_memory: have zap_huge_pmd return a boolean, add kdoc mm/huge: avoid big else branch in zap_huge_pmd() mm/huge_memory: simplify vma_is_specal_huge() mm: on remap assert that input range within the proposed VMA mm: add mmap_action_map_kernel_pages[_full]() uio: replace deprecated mmap hook with mmap_prepare in uio_info drivers: hv: vmbus: replace deprecated mmap hook with mmap_prepare mm: allow handling of stacked mmap_prepare hooks in more drivers ... |
||
|
Linus Torvalds
|
b206a6fb9a |
Merge tag 'selinux-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux update from Paul Moore: - Annotate a known race condition to soothe KCSAN * tag 'selinux-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: annotate intentional data race in inode_doinit_with_dentry() |
||
|
Linus Torvalds
|
3ba310f2a3 |
Merge tag 'lsm-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"We only have five patches in the LSM tree, but three of the five are
for an important bugfix relating to overlayfs and the mmap() and
mprotect() access controls for LSMs. Highlights below:
- Fix problems with the mmap() and mprotect() LSM hooks on overlayfs
As we are dealing with problems both in mmap() and mprotect() there
are essentially two components to this fix, spread across three
patches with all marked for stable.
The simplest portion of the fix is the creation of a new LSM hook,
security_mmap_backing_file(), that is used to enforce LSM mmap()
access controls on backing files in the stacked/overlayfs case. The
existing security_mmap_file() does not have visibility past the
user file. You can see from the associated SELinux hook callback
the code is fairly straightforward.
The mprotect() fix is a bit more complicated as there is no way in
the mprotect() code path to inspect both the user and backing
files, and bolting on a second file reference to vm_area_struct
wasn't really an option.
The solution taken here adds a LSM security blob and associated
hooks to the backing_file struct that LSMs can use to capture and
store relevant information from the user file. While the necessary
SELinux information is relatively small, a single u32, I expect
other LSMs to require more than that, and a dedicated backing_file
LSM blob provides a storage mechanism without negatively impacting
other filesystems.
I want to note that other LSMs beyond SELinux have been involved in
the discussion of the fixes presented here and they are working on
their own related changes using these new hooks, but due to other
issues those patches will be coming at a later date.
- Use kstrdup_const()/kfree_const() for securityfs symlink targets
- Resolve a handful of kernel-doc warnings in cred.h"
* tag 'lsm-pr-20260410' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
selinux: fix overlayfs mmap() and mprotect() access checks
lsm: add backing_file LSM hooks
fs: prepare for adding LSM blob to backing_file
securityfs: use kstrdup_const() to manage symlink targets
cred: fix kernel-doc warnings in cred.h
|
||
 Lorenzo Stoakes (Oracle)
|
3a6455d56b |
mm: convert do_brk_flags() to use vma_flags_t
In order to be able to do this, we need to change VM_DATA_DEFAULT_FLAGS and friends and update the architecture-specific definitions also. We then have to update some KSM logic to handle VMA flags, and introduce VMA_STACK_FLAGS to define the vma_flags_t equivalent of VM_STACK_FLAGS. We also introduce two helper functions for use during the time we are converting legacy flags to vma_flags_t values - vma_flags_to_legacy() and legacy_to_vma_flags(). This enables us to iteratively make changes to break these changes up into separate parts. We use these explicitly here to keep VM_STACK_FLAGS around for certain users which need to maintain the legacy vm_flags_t values for the time being. We are no longer able to rely on the simple VM_xxx being set to zero if the feature is not enabled, so in the case of VM_DROPPABLE we introduce VMA_DROPPABLE as the vma_flags_t equivalent, which is set to EMPTY_VMA_FLAGS if the droppable flag is not available. While we're here, we make the description of do_brk_flags() into a kdoc comment, as it almost was already. We use vma_flags_to_legacy() to not need to update the vm_get_page_prot() logic as this time. Note that in create_init_stack_vma() we have to replace the BUILD_BUG_ON() with a VM_WARN_ON_ONCE() as the tested values are no longer build time available. We also update mprotect_fixup() to use VMA flags where possible, though we have to live with a little duplication between vm_flags_t and vma_flags_t values for the time being until further conversions are made. While we're here, update VM_SPECIAL to be defined in terms of VMA_SPECIAL_FLAGS now we have vma_flags_to_legacy(). Finally, we update the VMA tests to reflect these changes. Link: https://lkml.kernel.org/r/d02e3e45d9a33d7904b149f5604904089fd640ae.1774034900.git.ljs@kernel.org Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org> Acked-by: Paul Moore <paul@paul-moore.com> [SELinux] Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: "Borislav Petkov (AMD)" <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Kees Cook <kees@kernel.org> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Ondrej Mosnacek <omosnace@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Pedro Falcato <pfalcato@suse.de> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: xu xin <xu.xin16@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
 Paul Moore
|
82544d36b1 |
selinux: fix overlayfs mmap() and mprotect() access checks
The existing SELinux security model for overlayfs is to allow access if the current task is able to access the top level file (the "user" file) and the mounter's credentials are sufficient to access the lower level file (the "backing" file). Unfortunately, the current code does not properly enforce these access controls for both mmap() and mprotect() operations on overlayfs filesystems. This patch makes use of the newly created security_mmap_backing_file() LSM hook to provide the missing backing file enforcement for mmap() operations, and leverages the backing file API and new LSM blob to provide the necessary information to properly enforce the mprotect() access controls. Cc: stable@vger.kernel.org Acked-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
 Jeff Layton
|
0b2600f81c |
treewide: change inode->i_ino from unsigned long to u64
On 32-bit architectures, unsigned long is only 32 bits wide, which causes 64-bit inode numbers to be silently truncated. Several filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that exceed 32 bits, and this truncation can lead to inode number collisions and other subtle bugs on 32-bit systems. Change the type of inode->i_ino from unsigned long to u64 to ensure that inode numbers are always represented as 64-bit values regardless of architecture. Update all format specifiers treewide from %lu/%lx to %llu/%llx to match the new type, along with corresponding local variable types. This is the bulk treewide conversion. Earlier patches in this series handled trace events separately to allow trace field reordering for better struct packing on 32-bit. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org Acked-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
 Christian Göttsche
|
8dc51459ef |
selinux: annotate intentional data race in inode_doinit_with_dentry()
Like other `isec->initialized == LABEL_INITIALIZED` checks annotate the check in inode_doinit_with_dentry() with data_race to please KCSAN. The value is rechecked next with lock held. Reported-by: syzbot+9ab96b38b76bec93939a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9ab96b38b76bec93939a Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
 Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Paul Moore
|
ea64aa57d5 |
selinux: drop the BUG() in cred_has_capability()
With the compile time check located immediately above the cred_has_capability() function ensuring that we will notice if the capability set grows beyond 63 capabilities, we can safely remove the BUG() call from the cred_has_capability(). Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Paul Moore
|
b07b6f0c5d |
selinux: fix a capabilities parsing typo in selinux_bpf_token_capable()
There was a typo, likely a cut-n-paste bug, where we were checking for
SECCLASS_CAPABILITY instead of SECCLASS_CAPABILITY2.
Fixes:
|
||
 Eric Suen
|
5473a722f7 |
selinux: add support for BPF token access control
BPF token support was introduced to allow a privileged process to delegate limited BPF functionality—such as map creation and program loading—to an unprivileged process: https://lore.kernel.org/linux-security-module/20231130185229.2688956-1-andrii@kernel.org/ This patch adds SELinux support for controlling BPF token access. With this change, SELinux policies can now enforce constraints on BPF token usage based on both the delegating (privileged) process and the recipient (unprivileged) process. Supported operations currently include: - map_create - prog_load High-level workflow: 1. An unprivileged process creates a VFS context via `fsopen()` and obtains a file descriptor. 2. This descriptor is passed to a privileged process, which configures BPF token delegation options and mounts a BPF filesystem. 3. SELinux records the `creator_sid` of the privileged process during mount setup. 4. The unprivileged process then uses this BPF fs mount to create a token and attach it to subsequent BPF syscalls. 5. During verification of `map_create` and `prog_load`, SELinux uses `creator_sid` and the current SID to check policy permissions via: avc_has_perm(creator_sid, current_sid, SECCLASS_BPF, BPF__MAP_CREATE, NULL); The implementation introduces two new permissions: - map_create_as - prog_load_as At token creation time, SELinux verifies that the current process has the appropriate `*_as` permission (depending on the `allowed_cmds` value in the bpf_token) to act on behalf of the `creator_sid`. Example SELinux policy: allow test_bpf_t self:bpf { map_create map_read map_write prog_load prog_run map_create_as prog_load_as }; Additionally, a new policy capability bpf_token_perms is added to ensure backward compatibility. If disabled, previous behavior ((checks based on current process SID)) is preserved. Signed-off-by: Eric Suen <ericsu@linux.microsoft.com> Tested-by: Daniel Durning <danieldurning.work@gmail.com> Reviewed-by: Daniel Durning <danieldurning.work@gmail.com> [PM: merge fuzz, subject tweaks, whitespace tweaks, line length tweaks] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Paul Moore
|
27a7cef9c3 |
selinux: move the selinux_blob_sizes struct
Move the selinux_blob_sizes struct so it adjacent to the rest of the SELinux initialization code and not in the middle of the LSM hook callbacks. Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
777f817160 |
Merge tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Bug fixes:
- defer credentials checking from the bprm_check_security hook to the
bprm_creds_from_file security hook
- properly ignore IMA policy rules based on undefined SELinux labels
IMA policy rule extensions:
- extend IMA to limit including file hashes in the audit logs
(dont_audit action)
- define a new filesystem subtype policy option (fs_subtype)
Misc:
- extend IMA to support in-kernel module decompression by deferring
the IMA signature verification in kernel_read_file() to after the
kernel module is decompressed"
* tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Handle error code returned by ima_filter_rule_match()
ima: Access decompressed kernel module to verify appended signature
ima: add fs_subtype condition for distinguishing FUSE instances
ima: add dont_audit action to suppress audit actions
ima: Attach CREDS_CHECK IMA hook to bprm_creds_from_file LSM hook
|
||
|
Linus Torvalds
|
51e3b98d73 |
Merge tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore: - Improve the granularity of SELinux labeling for memfd files Currently when creating a memfd file, SELinux treats it the same as any other tmpfs, or hugetlbfs, file. While simple, the drawback is that it is not possible to differentiate between memfd and tmpfs files. This adds a call to the security_inode_init_security_anon() LSM hook and wires up SELinux to provide a set of memfd specific access controls, including the ability to control the execution of memfds. As usual, the commit message has more information. - Improve the SELinux AVC lookup performance Adopt MurmurHash3 for the SELinux AVC hash function instead of the custom hash function currently used. MurmurHash3 is already used for the SELinux access vector table so the impact to the code is minimal, and performance tests have shown improvements in both hash distribution and latency. See the commit message for the performance measurments. - Introduce a Kconfig option for the SELinux AVC bucket/slot size While we have the ability to grow the number of AVC hash buckets today, the size of the buckets (slot size) is fixed at 512. This pull request makes that slot size configurable at build time through a new Kconfig knob, CONFIG_SECURITY_SELINUX_AVC_HASH_BITS. * tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: improve bucket distribution uniformity of avc_hash() selinux: Move avtab_hash() to a shared location for future reuse selinux: Introduce a new config to make avc cache slot size adjustable memfd,selinux: call security_inode_init_security_anon() |
||
|
Linus Torvalds
|
121cc35cfb |
Merge tag 'lsm-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore: - Rework the LSM initialization code What started as a "quick" patch to enable a notification event once all of the individual LSMs were initialized, snowballed a bit into a 30+ patch patchset when everything was done. Most of the patches, and diffstat, is due to splitting out the initialization code into security/lsm_init.c and cleaning up some of the mess that was there. While not strictly necessary, it does cleanup the code signficantly, and hopefully makes the upkeep a bit easier in the future. Aside from the new LSM_STARTED_ALL notification, these changes also ensure that individual LSM initcalls are only called when the LSM is enabled at boot time. There should be a minor reduction in boot times for those who build multiple LSMs into their kernels, but only enable a subset at boot. It is worth mentioning that nothing at present makes use of the LSM_STARTED_ALL notification, but there is work in progress which is dependent upon LSM_STARTED_ALL. - Make better use of the seq_put*() helpers in device_cgroup * tag 'lsm-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (36 commits) lsm: use unrcu_pointer() for current->cred in security_init() device_cgroup: Refactor devcgroup_seq_show to use seq_put* helpers lsm: add a LSM_STARTED_ALL notification event lsm: consolidate all of the LSM framework initcalls selinux: move initcalls to the LSM framework ima,evm: move initcalls to the LSM framework lockdown: move initcalls to the LSM framework apparmor: move initcalls to the LSM framework safesetid: move initcalls to the LSM framework tomoyo: move initcalls to the LSM framework smack: move initcalls to the LSM framework ipe: move initcalls to the LSM framework loadpin: move initcalls to the LSM framework lsm: introduce an initcall mechanism into the LSM framework lsm: group lsm_order_parse() with the other lsm_order_*() functions lsm: output available LSMs when debugging lsm: cleanup the debug and console output in lsm_init.c lsm: add/tweak function header comment blocks in lsm_init.c lsm: fold lsm_init_ordered() into security_init() lsm: cleanup initialize_lsm() and rename to lsm_init_single() ... |
||
|
Paul Moore
|
3ded250b97 |
selinux: rename the cred_security_struct variables to "crsec"
Along with the renaming from task_security_struct to cred_security_struct, rename the local variables to "crsec" from "tsec". This both fits with existing conventions and helps distinguish between task and cred related variables. No functional changes. Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Stephen Smalley
|
dde3a5d0f4 |
selinux: move avdcache to per-task security struct
The avdcache is meant to be per-task; move it to a new
task_security_struct that is duplicated per-task.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Stephen Smalley
|
75f72fe289 |
selinux: rename task_security_struct to cred_security_struct
Before Linux had cred structures, the SELinux task_security_struct was per-task and although the structure was switched to being per-cred long ago, the name was never updated. This change renames it to cred_security_struct to avoid confusion and pave the way for the introduction of an actual per-task security structure for SELinux. No functional change. Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
 Coiby Xu
|
c200892b46 |
ima: Access decompressed kernel module to verify appended signature
Currently, when in-kernel module decompression (CONFIG_MODULE_DECOMPRESS) is enabled, IMA has no way to verify the appended module signature as it can't decompress the module. Define a new kernel_read_file_id enumerate READING_MODULE_COMPRESSED so IMA can calculate the compressed kernel module data hash on READING_MODULE_COMPRESSED and defer appraising/measuring it until on READING_MODULE when the module has been decompressed. Before enabling in-kernel module decompression, a kernel module in initramfs can still be loaded with ima_policy=secure_boot. So adjust the kernel module rule in secure_boot policy to allow either an IMA signature OR an appended signature i.e. to use "appraise func=MODULE_CHECK appraise_type=imasig|modsig". Reported-by: Karel Srot <ksrot@redhat.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Coiby Xu <coxu@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> |
||
 Thiébaud Weksteen
|
094e94d13b |
memfd,selinux: call security_inode_init_security_anon()
Prior to this change, no security hooks were called at the creation of a memfd file. It means that, for SELinux as an example, it will receive the default type of the filesystem that backs the in-memory inode. In most cases, that would be tmpfs, but if MFD_HUGETLB is passed, it will be hugetlbfs. Both can be considered implementation details of memfd. It also means that it is not possible to differentiate between a file coming from memfd_create and a file coming from a standard tmpfs mount point. Additionally, no permission is validated at creation, which differs from the similar memfd_secret syscall. Call security_inode_init_security_anon during creation. This ensures that the file is setup similarly to other anonymous inodes. On SELinux, it means that the file will receive the security context of its task. The ability to limit fexecve on memfd has been of interest to avoid potential pitfalls where /proc/self/exe or similar would be executed [1][2]. Reuse the "execute_no_trans" and "entrypoint" access vectors, similarly to the file class. These access vectors may not make sense for the existing "anon_inode" class. Therefore, define and assign a new class "memfd_file" to support such access vectors. Guard these changes behind a new policy capability named "memfd_class". [1] https://crbug.com/1305267 [2] https://lore.kernel.org/lkml/20221215001205.51969-1-jeffxu@google.com/ Signed-off-by: Thiébaud Weksteen <tweek@google.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> [PM: subj tweak] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Paul Moore
|
3156bc814f |
selinux: move initcalls to the LSM framework
SELinux currently has a number of initcalls so we've created a new function, selinux_initcall(), which wraps all of these initcalls so that we have a single initcall function that can be registered with the LSM framework. Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Paul Moore
|
9f9dc69e06 |
lsm: replace the name field with a pointer to the lsm_id struct
Reduce the duplication between the lsm_id struct and the DEFINE_LSM() definition by linking the lsm_id struct directly into the individual LSM's DEFINE_LSM() instance. Linking the lsm_id into the LSM definition also allows us to simplify the security_add_hooks() function by removing the code which populates the lsm_idlist[] array and moving it into the normal LSM startup code where the LSM list is parsed and the individual LSMs are enabled, making for a cleaner implementation with less overhead at boot. Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: John Johansen <john.johansen@canonical.com> Reviewed-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
33fc69a05c |
Merge tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull d_name audit update from Al Viro:
"Simplifying ->d_name audits, easy part.
Turn dentry->d_name into an anon union of const struct qsrt (d_name
itself) and a writable alias (__d_name).
With constification of some struct qstr * arguments of functions that
get &dentry->d_name passed to them, that ends up with all
modifications provably done only in fs/dcache.c (and a fairly small
part of it).
Any new places doing modifications will be easy to find - grep for
__d_name will suffice"
* tag 'pull-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make it easier to catch those who try to modify ->d_name
generic_ci_validate_strict_name(): constify name argument
afs_dir_search: constify qstr argument
afs_edit_dir_{add,remove}(): constify qstr argument
exfat_find(): constify qstr argument
security_dentry_init_security(): constify qstr argument
|
||
|
Linus Torvalds
|
76f01a4f22 |
Merge tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: - Move the management of the LSM BPF security blobs into the framework In order to enable multiple LSMs we need to allocate and free the various security blobs in the LSM framework and not the individual LSMs as they would end up stepping all over each other. - Leverage the lsm_bdev_alloc() helper in lsm_bdev_alloc() Make better use of our existing helper functions to reduce some code duplication. - Update the Rust cred code to use 'sync::aref' Part of a larger effort to move the Rust code over to the 'sync' module. - Make CONFIG_LSM dependent on CONFIG_SECURITY As the CONFIG_LSM Kconfig setting is an ordered list of the LSMs to enable a boot, it obviously doesn't make much sense to enable this when CONFIG_SECURITY is disabled. - Update the LSM and CREDENTIALS sections in MAINTAINERS with Rusty bits Add the Rust helper files to the associated LSM and CREDENTIALS entries int the MAINTAINERS file. We're trying to improve the communication between the two groups and making sure we're all aware of what is going on via cross-posting to the relevant lists is a good way to start. * tag 'lsm-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: CONFIG_LSM can depend on CONFIG_SECURITY MAINTAINERS: add the associated Rust helper to the CREDENTIALS section MAINTAINERS: add the associated Rust helper to the LSM section rust,cred: update AlwaysRefCounted import to sync::aref security: use umax() to improve code lsm,selinux: Add LSM blob support for BPF objects lsm: use lsm_blob_alloc() in lsm_bdev_alloc() |
||
|
Linus Torvalds
|
57bc683896 |
Merge tag 'selinux-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore: - Support per-file labeling for functionfs Both genfscon and user defined labeling methods are supported. This should help users who want to provide separation between the control endpoint file, "ep0", and other endpoints. - Remove our use of get_zeroed_page() in sel_read_bool() Update sel_read_bool() to use a four byte stack buffer instead of a memory page fetched via get_zeroed_page(), and fix a memory in the process. Needless to say we should have done this a long time ago, but it was in a very old chunk of code that "just worked" and I don't think anyone had taken a real look at it in many years. - Better use of the netdev skb/sock helper functions Convert a sk_to_full_sk(skb->sk) into a skb_to_full_sk(skb) call. - Remove some old, dead, and/or redundant code * tag 'selinux-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: enable per-file labeling for functionfs selinux: fix sel_read_bool() allocation and error handling selinux: Remove redundant __GFP_NOWARN selinux: use a consistent method to get full socket from skb selinux: Remove unused function selinux_policycap_netif_wildcard() |
||
|
Linus Torvalds
|
56a0810d8c |
Merge tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore: - Proper audit support for multiple LSMs As the audit subsystem predated the work to enable multiple LSMs, some additional work was needed to support logging the different LSM labels for the subjects/tasks and objects on the system. Casey's patches add new auxillary records for subjects and objects that convey the additional labels. - Ensure fanotify audit events are always generated Generally speaking security relevant subsystems always generate audit events, unless explicitly ignored. However, up to this point fanotify events had been ignored by default, but starting with this pull request fanotify follows convention and generates audit events by default. - Replace an instance of strcpy() with strscpy() - Minor indentation, style, and comment fixes * tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix skb leak when audit rate limit is exceeded audit: init ab->skb_list earlier in audit_buffer_alloc() audit: add record for multiple object contexts audit: add record for multiple task security contexts lsm: security_lsmblob_to_secctx module selection audit: create audit_stamp structure audit: add a missing tab audit: record fanotify event regardless of presence of rules audit: fix typo in auditfilter.c comment audit: Replace deprecated strcpy() with strscpy() audit: fix indentation in audit_log_exit() |
||
 Al Viro
|
f9fadf23c7 |
security_dentry_init_security(): constify qstr argument
Nothing outside of fs/dcache.c has any business modifying dentry names; passing &dentry->d_name as an argument should have that argument declared as a const pointer. Acked-by: Casey Schaufler <casey@schaufler-ca.com> # smack part Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
 Neill Kapron
|
68e1e908cb |
selinux: enable per-file labeling for functionfs
This patch adds support for genfscon per-file labeling of functionfs files as well as support for userspace to apply labels after new functionfs endpoints are created. This allows for separate labels and therefore access control on a per-endpoint basis. An example use case would be for the default endpoint EP0 used as a restricted control endpoint, and additional usb endpoints to be used by other more permissive domains. It should be noted that if there are multiple functionfs mounts on a system, genfs file labels will apply to all mounts, and therefore will not likely be as useful as the userspace relabeling portion of this patch - the addition to selinux_is_genfs_special_handling(). This patch introduces the functionfs_seclabel policycap to maintain existing functionfs genfscon behavior unless explicitly enabled. Signed-off-by: Neill Kapron <nkapron@google.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> [PM: trim changelog, apply boolean logic fixup] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
 Simon Schuster
|
edd3cb05c0 |
copy_process: pass clone_flags as u64 across calltree
With the introduction of clone3 in commit
|
||
 Casey Schaufler
|
0ffbc876d0 |
audit: add record for multiple object contexts
Create a new audit record AUDIT_MAC_OBJ_CONTEXTS.
An example of the MAC_OBJ_CONTEXTS record is:
type=MAC_OBJ_CONTEXTS
msg=audit(1601152467.009:1050):
obj_selinux=unconfined_u:object_r:user_home_t:s0
When an audit event includes a AUDIT_MAC_OBJ_CONTEXTS record
the "obj=" field in other records in the event will be "obj=?".
An AUDIT_MAC_OBJ_CONTEXTS record is supplied when the system has
multiple security modules that may make access decisions based
on an object security context.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, audit example readability indents]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Casey Schaufler
|
eb59d494ee |
audit: add record for multiple task security contexts
Replace the single skb pointer in an audit_buffer with a list of
skb pointers. Add the audit_stamp information to the audit_buffer as
there's no guarantee that there will be an audit_context containing
the stamp associated with the event. At audit_log_end() time create
auxiliary records as have been added to the list. Functions are
created to manage the skb list in the audit_buffer.
Create a new audit record AUDIT_MAC_TASK_CONTEXTS.
An example of the MAC_TASK_CONTEXTS record is:
type=MAC_TASK_CONTEXTS
msg=audit(1600880931.832:113)
subj_apparmor=unconfined
subj_smack=_
When an audit event includes a AUDIT_MAC_TASK_CONTEXTS record the
"subj=" field in other records in the event will be "subj=?".
An AUDIT_MAC_TASK_CONTEXTS record is supplied when the system has
multiple security modules that may make access decisions based on a
subject security context.
Refactor audit_log_task_context(), creating a new audit_log_subj_ctx().
This is used in netlabel auditing to provide multiple subject security
contexts as necessary.
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, audit example readability indents]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
 Blaise Boscaccy
|
5816bf4273 |
lsm,selinux: Add LSM blob support for BPF objects
This patch introduces LSM blob support for BPF maps, programs, and tokens to enable LSM stacking and multiplexing of LSM modules that govern BPF objects. Additionally, the existing BPF hooks used by SELinux have been updated to utilize the new blob infrastructure, removing the assumption of exclusive ownership of the security pointer. Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com> [PM: dropped local variable init, style fixes] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
 Tianjia Zhang
|
d4e8dc8e8b |
selinux: use a consistent method to get full socket from skb
In order to maintain code consistency and readability, skb_to_full_sk() is used to get full socket from skb. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
dffb641bea |
Merge tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore: - Introduce the concept of a SELinux "neveraudit" type which prevents all auditing of the given type/domain. Taken by itself, the benefit of marking a SELinux domain with the "neveraudit" tag is likely not very interesting, especially given the significant overlap with the "dontaudit" tag. However, given that the "neveraudit" tag applies to *all* auditing of the tagged domain, we can do some fairly interesting optimizations when a SELinux domain is marked as both "permissive" and "dontaudit" (think of the unconfined_t domain). While this pull request includes optimized inode permission and getattr hooks, these optimizations require SELinux policy changes, therefore the improvements may not be visible on standard downstream Linux distos for a period of time. - Continue the deprecation process of /sys/fs/selinux/user. After removing the associated userspace code in 2020, we marked the /sys/fs/selinux/user interface as deprecated in Linux v6.13 with pr_warn() and the usual documention update. This adds a five second sleep after the pr_warn(), following a previous deprecation process pattern that has worked well for us in the past in helping identify any existing users that we haven't yet reached. - Add a __GFP_NOWARN flag to our initial hash table allocation. Fuzzers such a syzbot often attempt abnormally large SELinux policy loads, which the SELinux code gracefully handles by checking for allocation failures, but not before the allocator emits a warning which causes the automated fuzzing to flag this as an error and report it to the list. While we want to continue to support the work done by the fuzzing teams, we want to focus on proper issues and not an error case that is already handled safely. Add a NOWARN flag to quiet the allocator and prevent syzbot from tripping on this again. - Remove some unnecessary selinuxfs cleanup code, courtesy of Al. - Update the SELinux in-kernel documentation with pointers to additional information. * tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: don't bother with selinuxfs_info_free() on failures selinux: add __GFP_NOWARN to hashtab_init() allocations selinux: optimize selinux_inode_getattr/permission() based on neveraudit|permissive selinux: introduce neveraudit types documentation: add links to SELinux resources selinux: add a 5 second sleep to /sys/fs/selinux/user |
||
 Christian Brauner
|
ca115d7e75 |
tree-wide: s/struct fileattr/struct file_kattr/g
Now that we expose struct file_attr as our uapi struct rename all the
internal struct to struct file_kattr to clearly communicate that it is a
kernel internal struct. This is similar to struct mount_{k}attr and
others.
Link: https://lore.kernel.org/20250703-restlaufzeit-baurecht-9ed44552b481@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
||
 Andrey Albershteyn
|
bd14e462bb |
selinux: implement inode_file_[g|s]etattr hooks
These hooks are called on inode extended attribute retrieval/change. Cc: selinux@vger.kernel.org Cc: Paul Moore <paul@paul-moore.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-3-c4e3bc35227b@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Stephen Smalley
|
951b2de06a |
selinux: optimize selinux_inode_getattr/permission() based on neveraudit|permissive
Extend the task avdcache to also cache whether the task SID is both permissive and neveraudit, and return immediately if so in both selinux_inode_getattr() and selinux_inode_permission(). The same approach could be applied to many of the hook functions although the avdcache would need to be updated for more than directory search checks in order for this optimization to be beneficial for checks on objects other than directories. To test, apply https://github.com/SELinuxProject/selinux/pull/473 to your selinux userspace, build and install libsepol, and use the following CIL policy module: $ cat neverauditpermissive.cil (typeneveraudit unconfined_t) (typepermissive unconfined_t) Without this module inserted, running the following commands: perf record make -jN # on an already built allmodconfig tree perf report --sort=symbol,dso yields the following percentages (only showing __d_lookup_rcu for reference and only showing relevant SELinux functions): 1.65% [k] __d_lookup_rcu 0.53% [k] selinux_inode_permission 0.40% [k] selinux_inode_getattr 0.15% [k] avc_lookup 0.05% [k] avc_has_perm 0.05% [k] avc_has_perm_noaudit 0.02% [k] avc_policy_seqno 0.02% [k] selinux_file_permission 0.01% [k] selinux_inode_alloc_security 0.01% [k] selinux_file_alloc_security for a total of 1.24% for SELinux compared to 1.65% for __d_lookup_rcu(). After running the following command to insert this module: semodule -i neverauditpermissive.cil and then re-running the same perf commands from above yields the following non-zero percentages: 1.74% [k] __d_lookup_rcu 0.31% [k] selinux_inode_permission 0.03% [k] selinux_inode_getattr 0.03% [k] avc_policy_seqno 0.01% [k] avc_lookup 0.01% [k] selinux_file_permission 0.01% [k] selinux_file_open for a total of 0.40% for SELinux compared to 1.74% for __d_lookup_rcu(). Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
1b98f357da |
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Paul Moore
|
05f1a93922 |
selinux: fix the kdoc header for task_avdcache_update
The kdoc header incorrectly references an older parameter, update it to reference what is currently used in the function. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504122308.Ch8PzJdD-lkp@intel.com/ Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
 Kuniyuki Iwashima
|
2a63dd0edf |
net: Retire DCCP socket.
DCCP was orphaned in 2021 by commit |
||
|
Paul Moore
|
5d7ddc59b3 |
selinux: reduce path walk overhead
Reduce the SELinux performance overhead during path walks through the
use of a per-task directory access cache and some minor code
optimizations. The directory access cache is per-task because it allows
for a lockless cache while also fitting well with a common application
pattern of heavily accessing a relatively small number of SELinux
directory labels. The cache is inherited by child processes when the
child runs with the same SELinux domain as the parent, and invalidated
on changes to the task's SELinux domain or the loaded SELinux policy.
A cache of four entries was chosen based on testing with the Fedora
"targeted" policy, a SELinux Reference Policy variant, and
'make allmodconfig' on Linux v6.14.
Code optimizations include better use of inline functions to reduce
function calls in the common case, especially in the inode revalidation
code paths, and elimination of redundant checks between the LSM and
SELinux layers.
As mentioned briefly above, aside from general use and regression
testing with the selinux-testsuite, performance was measured using
'make allmodconfig' with Linux v6.14 as a base reference. As expected,
there were variations from one test run to another, but the measurements
below are a good representation of the test results seen on my test
system.
* Linux v6.14
REF
1.26% [k] __d_lookup_rcu
SELINUX (1.31%)
0.58% [k] selinux_inode_permission
0.29% [k] avc_lookup
0.25% [k] avc_has_perm_noaudit
0.19% [k] __inode_security_revalidate
* Linux v6.14 + patch
REF
1.41% [k] __d_lookup_rcu
SELINUX (0.89%)
0.65% [k] selinux_inode_permission
0.15% [k] avc_lookup
0.05% [k] avc_has_perm_noaudit
0.04% [k] avc_policy_seqno
X.XX% [k] __inode_security_revalidate (now inline)
In both cases the __d_lookup_rcu() function was used as a reference
point to establish a context for the SELinux related functions. On a
unpatched Linux v6.14 system we see the time spent in the combined
SELinux functions exceeded that of __d_lookup_rcu(), 1.31% compared to
1.26%. However, with this patch applied the time spent in the combined
SELinux functions dropped to roughly 65% of the time spent in
__d_lookup_rcu(), 0.89% compared to 1.41%. Aside from the significant
decrease in time spent in the SELinux AVC, it appears that any additional
time spent searching and updating the cache is offset by other code
improvements, e.g. time spent in selinux_inode_permission() +
__inode_security_revalidate() + avc_policy_seqno() is less on the
patched kernel than the unpatched kernel.
It is worth noting that in this patch the use of the per-task cache is
limited to the security_inode_permission() LSM callback,
selinux_inode_permission(), but future work could expand the cache into
inode_has_perm(), likely through consolidation of the two functions.
While this would likely have little to no impact on path walks, it
may benefit other operations.
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Tested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Linus Torvalds
|
2cd5769fb0 |
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
||
|
Linus Torvalds
|
fa593d0f96 |
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
||
|
Linus Torvalds
|
59c017ce9e |
Merge tag 'selinux-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore: - Add additional SELinux access controls for kernel file reads/loads The SELinux kernel file read/load access controls were never updated beyond the initial kernel module support, this pull request adds support for firmware, kexec, policies, and x.509 certificates. - Add support for wildcards in network interface names There are a number of userspace tools which auto-generate network interface names using some pattern of <XXXX>-<NN> where <XXXX> is a fixed string, e.g. "podman", and <NN> is a increasing counter. Supporting wildcards in the SELinux policy for network interfaces simplifies the policy associted with these interfaces. - Fix a potential problem in the kernel read file SELinux code SELinux should always check the file label in the security_kernel_read_file() LSM hook, regardless of if the file is being read in chunks. Unfortunately, the existing code only considered the file label on the first chunk; this pull request fixes this problem. There is more detail in the individual commit, but thankfully the existing code didn't expose a bug due to multi-stage reads only taking place in one driver, and that driver loading a file type that isn't targeted by the SELinux policy. - Fix the subshell error handling in the example policy loader Minor fix to SELinux example policy loader in scripts/selinux due to an undesired interaction with subshells and errexit. * tag 'selinux-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: get netif_wildcard policycap from policy instead of cache selinux: support wildcard network interface names selinux: Chain up tool resolving errors in install_policy.sh selinux: add permission checks for loading other kinds of kernel files selinux: always check the file label in selinux_kernel_read_file() selinux: fix spelling error |
||
|
Linus Torvalds
|
054570267d |
Merge tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore: - Various minor updates to the LSM Rust bindings Changes include marking trivial Rust bindings as inlines and comment tweaks to better reflect the LSM hooks. - Add LSM/SELinux access controls to io_uring_allowed() Similar to the io_uring_disabled sysctl, add a LSM hook to io_uring_allowed() to enable LSMs a simple way to enforce security policy on the use of io_uring. This pull request includes SELinux support for this new control using the io_uring/allowed permission. - Remove an unused parameter from the security_perf_event_open() hook The perf_event_attr struct parameter was not used by any currently supported LSMs, remove it from the hook. - Add an explicit MAINTAINERS entry for the credentials code We've seen problems in the past where patches to the credentials code sent by non-maintainers would often languish on the lists for multiple months as there was no one explicitly tasked with the responsibility of reviewing and/or merging credentials related code. Considering that most of the code under security/ has a vested interest in ensuring that the credentials code is well maintained, I'm volunteering to look after the credentials code and Serge Hallyn has also volunteered to step up as an official reviewer. I posted the MAINTAINERS update as a RFC to LKML in hopes that someone else would jump up with an "I'll do it!", but beyond Serge it was all crickets. - Update Stephen Smalley's old email address to prevent confusion This includes a corresponding update to the mailmap file. * tag 'lsm-pr-20250323' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: mailmap: map Stephen Smalley's old email addresses lsm: remove old email address for Stephen Smalley MAINTAINERS: add Serge Hallyn as a credentials reviewer MAINTAINERS: add an explicit credentials entry cred,rust: mark Credential methods inline lsm,rust: reword "destroy" -> "release" in SecurityCtx lsm,rust: mark SecurityCtx methods inline perf: Remove unnecessary parameter of security check lsm: fix a missing security_uring_allowed() prototype io_uring,lsm,selinux: add LSM hooks for io_uring_setup() io_uring: refactor io_uring_allowed() |