Commit d594cc6f2c ("wifi: mac80211: restore non-chanctx injection
behaviour") restored the monitor injection fallback for drivers using
chanctx emulation but explicitly deferred drivers that transitioned
to real chanctx ops. mt76 falls in that category and still drops
every injected frame when monitor coexists with another interface.
When the monitor has no chanctx of its own, fall back to the only
chanctx in flight if there is exactly one. Refuse if multiple are
present: picking arbitrarily would inject on an unrelated channel.
Emulated and real chanctx drivers both flow through this fallback,
since emulation always presents zero or one chanctx in
local->chanctx_list.
Reran the airgeddon evil-twin flow (hostapd AP + coexisting monitor
VIF on the same phy + aireplay-ng deauth from the monitor) on
mt7921e PCIe and mt7921u USB across 2.4 GHz and 5 GHz, and on a
Kali VM with MT7921U passthrough as the closest match to the
original reporter's setup. None reproduced the hang seen against
the earlier attempt at this fix
(<20251216111909.25076-2-johannes@sipsolutions.net>) or against v1
on lore in March.
Cc: <stable+noautosel@kernel.org> # causes some older drivers to crash
Reported-by: Oscar Alfonso Diaz <oscar.alfonso.diaz@gmail.com>
Closes: https://github.com/morrownr/USB-WiFi/issues/682
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: 傅继晗 <fjhhz1997@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/5c2760bd9bc34616bf7892848872522254dd1ce5.1780513445.git.lucid_duck@justthetip.ca
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are multiple cases where interface links are removed
and the station links need to be removed with them, e.g.
in mlme.c we have both received and transmitted multi-link
reconfiguration, doing the two things in different order,
the former deleting STA links when the vif link change may
still fail.
It's also not clear that userspace (hostapd) couldn't, at
least in theory, remove a link from an interface without
removing the station links first, or even leave stations
that aren't MLO-capable, using that link.
Unify this code into ieee80211_vif_update_links() so that
it always happens, always happens in the right order and
is transactional (i.e. failures are handled correctly.)
Link: https://patch.msgid.link/20260529102644.c352f73a4658.I7219a5d72dab2abcecea9b5c52e7eb7a50e68d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce basic rate encoding/decoding for S1G stas such that the
usermode rx reporting is relevant as it currently uses VHT calculations
which are obviously wildy different to S1G. Sample iw output (with the
associated iw patches applied):
Connected to 0c:bf:74:00:21:c4 (on wlan0)
SSID: wifi_halow
freq: 923.500
RX: 7325230 bytes (4756 packets)
TX: 190044 bytes (2238 packets)
signal: -38 dBm
rx bitrate: 43.3 MBit/s S1G-MCS 9 8MHz short GI S1G-NSS 1
tx bitrate: 43.3 MBit/s S1G-MCS 9 8MHz short GI S1G-NSS 1
bss flags:
dtim period: 1
beacon int: 100
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260602062224.1792985-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the AF flag is enabled, hwmp_prep_frame_process() overreads orig_addr
by 2 bytes. Since this occurs within the socket buffer, it does not read
across memory boundaries and therefore poses no security risk; however, we
will fix it as a precaution.
In this fix, a new function mesh_path_parse_reply_frame() is established to
separate the implementation of frame format validation and the check for
unsupported features. This is intended to facilitate future work when
implementing the currently unsupported parts.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-5-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the AF flag is enabled, hwmp_preq_frame_process() overreads
target_addr by 2 bytes. Since this occurs within the socket buffer, it does
not read across memory boundaries and therefore poses no security risk;
however, we will fix it as a precaution.
In this fix, a new function mesh_path_parse_request_frame() is established
to separate the implementation of frame format validation and the check for
unsupported features. This is intended to facilitate future work when
implementing the currently unsupported parts.
Assisted-by: Claude:Sonnet 4.6
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-4-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing PERR_IE_* macros access HWMP PERR frame fields via hardcoded
byte offsets. Each PERR destination entry contains an optional 6-byte AE
(Address Extension) address followed by a reason code, making offset-based
access error-prone.
Introduce typed packed C structs to represent the PERR frame layout:
- ieee80211_mesh_hwmp_perr: top-level frame containing TTL and
destination count
- ieee80211_mesh_hwmp_perr_dst: per-destination entry with optional AE
address and variable-position reason code
Add ieee80211_mesh_hwmp_perr_get_rcode() to locate the reason code in
each destination entry depending on whether the AE flag is set.
This refactoring makes the PERR processing code consistent with the
struct-based approach adopted for PREQ and PREP in preceding patches.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-3-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing PREP_IE_* macros access HWMP PREP frame fields via hardcoded
byte offsets. When the AE (Address Extension) flag is set, an additional
6 bytes appear mid-frame, making the offset arithmetic error-prone.
Introduce typed packed C structs to represent the PREP frame layout:
- ieee80211_mesh_hwmp_prep_top: fixed fields before the optional AE
address
- ieee80211_mesh_hwmp_prep_bottom: fields after the optional AE address
Add ieee80211_mesh_hwmp_prep_get_bottom() to locate the bottom struct
correctly based on whether the AE flag is set.
This preparatory refactoring is needed to fix a 2-byte overread of
orig_addr in hwmp_prep_frame_process() when AE is enabled, which is
addressed in a subsequent patch.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-2-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing PREQ_IE_* macros access HWMP PREQ frame fields via hardcoded
byte offsets. When the AE (Address Extension) flag is set, an additional
6 bytes appear mid-frame, and the macros handle this with conditional
arithmetic (e.g., AE_F_SET(x) ? x + N+6 : x + N). This approach
obscures the frame layout and is prone to miscalculation.
Introduce typed packed C structs to represent the PREQ frame layout:
- ieee80211_mesh_hwmp_preq_top: fixed fields before the optional AE
address
- ieee80211_mesh_hwmp_preq_bottom: fields after the optional AE address
- ieee80211_mesh_hwmp_preq_target: per-target fields
Add ieee80211_mesh_hwmp_preq_get_bottom() to locate the bottom struct
correctly based on whether the AE flag is set.
This preparatory refactoring is needed to fix a 2-byte overread of
target_addr in hwmp_preq_frame_process() when AE is enabled, which is
addressed in a subsequent patch.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://patch.msgid.link/20260529230952.124754-1-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove WIPHY_FLAG_SUPPORTS_5_10_MHZ and 5/10 MHz channel
width support. We contemplated this back in early 2023
and didn't do it yet, but nobody stepped up to maintain
it.
It's already _mostly_ dead code since it can really only
be used for AP and maybe IBSS and monitor, but not on a
client since there's no way to scan (and hasn't been in
a very long time, if ever), so the only thing that ever
could really happen with it was run syzbot and trip over
assumptions in the code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260529084502.080c5885f0b7.I77cc94485b523c3c006005b9233db13cd4e077b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a non-MLD station associates with an MLD AP, it does so on a
specific link. However, sta_set_sinfo() never sets mlo_params_valid,
so nl80211 never emits NL80211_ATTR_MLO_LINK_ID in get_station /
dump_station responses. Userspace has no way to determine which link
a non-MLD STA is associated on.
Set mlo_params_valid to 1 and assoc_link_id to sta->deflink.link_id,
when valid_links is set.
Also set the mld_addr copy only for MLD STAs, so that non-MLD STAs
get a zeroed mld_addr as documented.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260528105042.835284-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Conflicts:
drivers/net/ethernet/microsoft/mana/mana_en.c:
17bfe0a8c0 ("net: mana: Add NULL guards in teardown path to prevent panic on attach failure")
d07efe5a6e ("net: mana: Use per-queue allocation for tx_qp to reduce allocation size")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2026-05-29
1) xfrm: route MIGRATE notifications to caller's netns
Thread the caller's netns through km_migrate() so that
MIGRATE notifications go to the issuing netns, fixing both the
init_net listener leak and MOBIKE notifications inside
non-init netns. From Maoyi Xie.
2) xfrm: ipcomp: Free destination pages on acomp errors
Move the out_free_req label up so that allocated destination
pages are released on decompression errors, not only on success.
From Herbert Xu.
3) xfrm: Check for underflow in xfrm_state_mtu
Reject configurations that cause xfrm_state_mtu() to underflow,
preventing a negative TFCPAD value from becoming a memset size
that triggers an out-of-bounds write of several terabytes.
From David Ahern.
4) xfrm: ah: use skb_to_full_sk in async output callbacks
Convert the possibly-incomplete skb->sk to a full socket pointer
in async AH callbacks so that a request_sock or timewait_sock
never reaches xfrm_output_resume() downstream consumers.
From Michael Bommarito.
5) Add and revert: esp: fix page frag reference leak on skb_to_sgvec failure
The patch does not fix te issue completely.
6) xfrm: esp: restore combined single-frag length gate
Check the aligned post-trailer combined length against a page limit
in the fast path, preventing skb_page_frag_refill() from falling
back to a page too small for the destination scatterlist.
From Jingguo Tan.
7) xfrm: iptfs: reset runtime state when cloning SAs
Reinitialise the clone's mode_data runtime objects before
publishing it, preventing queued skbs from being freed with
list state copied from the original SA when migration fails.
From Shaomin Chen.
8) xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
Flush policy tables and drain the workqueue in a .pre_exit handler
so that cleanup_net() pays one RCU grace period per batch instead
of one per namespace, fixing stalls at high CLONE_NEWNET rates.
From Usama Arif.
9) xfrm: input: hold netns during deferred transport reinjection
Take a netns reference when queueing deferred transport reinjection
work and drop it after the callback completes, keeping the skb->cb
net pointer valid until the deferred work runs.
From Zhengchuan Liang.
* tag 'ipsec-2026-05-29' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
xfrm: input: hold netns during deferred transport reinjection
xfrm: move policy_bydst RCU sync from per-netns .exit to .pre_exit
xfrm: iptfs: reset runtime state when cloning SAs
xfrm: esp: restore combined single-frag length gate
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: ah: use skb_to_full_sk in async output callbacks
xfrm: Check for underflow in xfrm_state_mtu
xfrm: ipcomp: Free destination pages on acomp errors
xfrm: route MIGRATE notifications to caller's netns
====================
Link: https://patch.msgid.link/20260529092648.3878973-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Found while auditing the same pattern Sashiko reported in
rt6_fill_node() [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&first->fib6_siblings)
without waiting for RCU readers; first->fib6_siblings.next then
still points into the old ring and this softirq-side walker never
reaches &first->fib6_siblings as its terminator. fib6_purge_rt()
always WRITE_ONCE()s first->fib6_nsiblings to 0 before
list_del_rcu(), so an inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-2-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported this issue [1]. Apply the same fix as
commit f8d8ce1b51 ("ipv6: fix possible infinite loop in fib6_info_uses_dev()").
Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings)
without waiting for RCU readers; rt->fib6_siblings.next then still
points into the old ring and this softirq-side walker never reaches
&rt->fib6_siblings, causing a CPU stall. fib6_del_route() always
WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an
inside-loop check is a reliable detach signal.
[1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
Fixes: d9ccb18f83 ("ipv6: Fix soft lockups in fib6_select_path under high next hop churn")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260527053133.180695-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry.
Fixes: 6fff607e2f ("bpf: sk_msg program helper bpf_msg_push_data")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuqi Xu <xuyq21@lenovo.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/8b129d10566aa3eb43f61a8f9757bcf51707d324.1779636774.git.xuyq21@lenovo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Signed-off-by: Lin Ma <malin89@huawei.com>
Signed-off-by: Rongzhen Cui <cuirongzhen@huawei.com>
Signed-off-by: Jingguo Tan <tanjingguo@huawei.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260527023301.1075581-1-malin89@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 2982e599ff.
The patch does not fully fix the issue and the Author does
not match the 'Signed-off-by:' tag, so revert it for now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The kdoc for page_pool_get_stats() is missing a Returns: statement.
Looking at this function, I have no idea what is the purpose of
the bool it returns. My guess was that maybe the static inline
stub returns false if CONFIG_PAGE_POOL_STATS=n but such static
inline helper doesn't exist at all. All callers pass a pointer
to a struct on the stack. Make this function void.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260526155722.2790742-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Netlink support for querying page pool stats has been
proven out in production, let's remove the mention of the
helper meant for dumping page pool stats into ethtool -S
from the docs.
Call out in the kdoc that this API is deprecated.
Some drivers may not be able to use the Netlink API
(if page pool is shared across netdevs). So the old API
is not _completely_ dead. But we shouldn't advertise it.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260526155722.2790742-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_core: Rework hci_dev_do_reset() to use hci_sync functions
- hci_conn: Fix memory leak in hci_le_big_terminate()
- hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
- hci_sync: Reset device counters in hci_dev_close_sync()
- hci_sync: fix UAF in hci_le_create_cis_sync
- L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
- L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
- L2CAP: use chan timer to close channels in cleanup_listen()
- L2CAP: clear chan->ident on ECRED reconfiguration success
- ISO: fix UAF in iso_recv_frame
- ISO: serialize iso_sock_clear_timer with socket lock
- HIDP: fix missing length checks in hidp_input_report()
- 6lowpan: check skb_clone() return value in send_mcast_pkt()
- btusb: Allow firmware re-download when version matches
- hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
* tag 'for-net-2026-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
Bluetooth: hci_sync: fix UAF in hci_le_create_cis_sync
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
Bluetooth: btusb: Allow firmware re-download when version matches
Bluetooth: HIDP: fix missing length checks in hidp_input_report()
Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()
Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn
Bluetooth: hci_conn: Fix memory leak in hci_le_big_terminate()
====================
Link: https://patch.msgid.link/20260528131839.462344-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_wait_for_connect() drops and re-acquires the socket lock while
waiting for the association to reach ESTABLISHED state. During this
window, another thread can peeloff the association to a new socket via
getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After
re-acquiring the old socket lock, sctp_wait_for_connect() returns
success without noticing the migration — the caller then accesses
the association under the wrong lock in sctp_datamsg_from_user().
Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf()
already has, returning an error if the association was migrated while
we slept.
Fixes: 668c9beb90 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260527032411.60959-1-kipreyyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ETHTOOL_MSG_STRSET_GET is the only op which sets allow_nodev_do.
When no device is provided it dumps static tables, there's no
need to hold rtnl_lock for this.
Not taking rtnl_lock is a minor win in itself so I think this
patch stands on its own merits. Later on it will be useful
to do locking only in paths which have access to a netdev,
so that we can decide which locks to take per-netdev.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260527162522.3344231-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 4157501b9a ("vsock/virtio: fix skb overhead
overflow on 32-bit builds"). The fix was semantically correct (although
it would have been better to use mul_u32_u32(), as David pointed out),
but in practice we are estimating the memory used to allocate the SKBs,
and this will never cause a 32-bit variable to overflow on a 32-bit
system, since the memory would have run out long before that. On 64-bit,
SKB_TRUESIZE() already evaluates to size_t, so the multiplication is
already in 64-bit arithmetic without the cast.
Let's revert this to avoid unnecessary 64-bit multiplies on the
per-packet receive path on 32-bit systems.
Reported-by: David Laight <david.laight.linux@gmail.com>
Closes: https://lore.kernel.org/netdev/20260523173557.5cc4f4f6@pumpkin
Suggested-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260527171046.130211-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
Before resetting or closing the device, protocol counters should also be
zeroed.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since hci_dev_close_sync() can now be called during the reset path, we
should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts
while the hdev workqueue is being drained.
Fixes: 877afadad2 ("Bluetooth: When HCI work queue is drained, only queue chained work")
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current HCI reset function in hci_core.c duplicates most of the work
done by hci_dev_close_sync(), and doesn't handle LE, advertising or
discovery.
Instead of porting these to hci_dev_do_reset(), directly call the
close/open functions from hci_sync to reset the hdev. MGMT now notifies
when a user performs a reset.
Suggested-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_close() calls iso_sock_clear_timer() before acquiring
lock_sock(sk).
iso_sock_clear_timer() reads iso_pi(sk)->conn twice without the
socket lock held:
if (!iso_pi(sk)->conn)
return;
cancel_delayed_work(&iso_pi(sk)->conn->timeout_work);
Concurrently, iso_conn_del() executes under lock_sock(sk) and calls
iso_chan_del(), which sets iso_pi(sk)->conn to NULL and may result in
the final reference to the connection being dropped:
CPU0 CPU1
---- ----
iso_sock_clear_timer()
if (conn != NULL) ... lock_sock(sk)
iso_chan_del()
iso_pi(sk)->conn = NULL
cancel_delayed_work(conn) /* NULL deref or UAF */
iso_pi(sk)->conn is not stable across the unlock window, causing a
NULL pointer dereference or use-after-free.
Serialize iso_sock_clear_timer() with the socket lock by moving it
inside lock_sock()/release_sock(), matching the pattern used in
iso_conn_del() and all other call sites.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock
before using sk, with no reference held. A concurrent iso_sock_kill()
can free sk in that window, causing use-after-free on sk->sk_state and
sock_queue_rcv_skb().
Fix by replacing the bare pointer read with iso_sock_hold(conn), which
calls sock_hold() while the spinlock is held, atomically elevating the
refcount before the lock drops. Add a drop_put label so sock_put() is
called on all exit paths where the hold succeeded.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
傅继晗
Ilan Peer
Johannes Berg
Lachlan Hodges
Masashi Honma
Felix Fietkau
Paolo Abeni
Fernando Fernandez Mancera
Jakub Kicinski
Pavel Begunkov
Jiayuan Chen
Yuqi Xu
Jingguo Tan
Steffen Klassert
Zhenghang Xiao
Stefano Garzarella
Linus Torvalds
Heitor Alves de Siqueira
Muhammad Bilal