Many bluetooth source files are missing SPDX-License-Identifier
lines. Add appropriate IDs to these files, and remove other
license lines from the headers.
Leave the warranty disclaimer in files where the license ID is
GPL-2.0 but the wording of the disclaimer is slightly different
from that of the GPL v2 disclaimer.
It is not different enough to cause licensing conflicts, but is
kept to honor the original contributors' legal intent.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_big_sync_established_evt() currently does:
conn->num_bis = 0;
memset(conn->bis, 0, sizeof(conn->num_bis));
sizeof(conn->num_bis) is wrong - it would make sense to either use
conn->num_bis (before setting that to 0) or sizeof(conn->bis).
Fix it by using sizeof(conn->bis), the least intrusive change.
Luckily, nothing actually depends on this memset() working properly:
Nothing seems to ever read from conn->bis beyond conn->num_bis, and when
conn->num_bis is increased, the corresponding elements of conn->bis are
initialized. So I think this line could also just be removed.
This is a purely theoretical fix and should have no impact on actual
behavior.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_le_create_big_complete_evt() iterates over BT_BOUND connections for
a BIG handle using a while loop, accessing ev->bis_handle[i++] on each
iteration. However, there is no check that i stays within ev->num_bis
before the array access.
When a controller sends a LE_Create_BIG_Complete event with fewer
bis_handle entries than there are BT_BOUND connections for that BIG,
or with num_bis=0, the loop reads beyond the valid bis_handle[] flex
array into adjacent heap memory. Since the out-of-bounds values
typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle()
rejects them and the connection remains in BT_BOUND state. The same
connection is then found again by hci_conn_hash_lookup_big_state(),
creating an infinite loop with hci_dev_lock held.
Fix this by terminating the BIG if in case not all BIS could be setup
properly.
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Cc: stable@vger.kernel.org
Signed-off-by: ZhiTao Ou <hkbinbinbin@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise
the connection can be freed concurrently.
Extend the hci_dev_lock critical section to cover all conn usage in both
handlers.
Keep the existing keypress notification behavior unchanged by routing
the early exits through a common unlock path.
Fixes: 92a25256f1 ("Bluetooth: mgmt: Implement support for passkey notification")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls
hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm()
assumes it is held, and if conn is deleted concurrently -> UAF.
Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen,
and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred
listening socket code paths, hci_connect_cfm(conn) is called with
hdev->lock held.
Fix by holding the lock.
Fixes: 70c4642563 ("Bluetooth: Refactor connection request handling")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn lookup and field access must be covered by hdev lock in
hci_le_remote_conn_param_req_evt, otherwise it's possible it is freed
concurrently.
Extend the hci_dev_lock critical section to cover all conn usage.
Fixes: 95118dd4ed ("Bluetooth: hci_event: Use of a function table to handle LE subevents")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt().
Fixes: 2f20216c1d ("Bluetooth: Emit controller suspend and resume events")
Cc: stable@vger.kernel.org
Signed-off-by: Oleh Konko <security@1seal.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
conn->le_{tx,rx}_phy is not actually a bitfield as it set by
HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current
PHY in use not what is supported by the controller, so this introduces
different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are
supported by the connection.
Fixes: eab2404ba7 ("Bluetooth: Add BT_PHY socket option")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for emulating LL Extended Feature Set introduced in 6.0
that adds the following:
Commands:
- HCI_LE_Read_All_Local_Supported_Features(0x2087)(Feature:47,1)
- HCI_LE_Read_All_Remote_Features(0x2088)(Feature:47,2)
Events:
- HCI_LE_Read_All_Remote_Features_Complete(0x2b)(Mask bit:42)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure hci_conn is initialized with the identity address if
a matching IRK exists which avoids the trouble of having to do it at
multiple places which seems to be missing (e.g. CIS, BIS and PA).
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds PAST related commands (HCI_OP_LE_PAST,
HCI_OP_LE_PAST_SET_INFO and HCI_OP_LE_PAST_PARAMS) and events
(HCI_EV_LE_PAST_RECEIVED) along with handling of PAST sender and
receiver features bits including new MGMG settings (
HCI_EV_LE_PAST_RECEIVED and MGMT_SETTING_PAST_RECEIVER) which
userspace can use to determine if PAST is supported by the
controller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Contrary to what was stated on d36349ea73 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.
Fixes: d36349ea73 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK")
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Periodic advertising enabled flag cannot be tracked by the enabled
flag since advertising and periodic advertising each can be
enabled/disabled separately from one another causing the states to be
inconsistent when for example an advertising set is disabled its
enabled flag is set to false which is then used for periodic which has
not being disabled.
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the state tracking of advertisement set/instance 0x00 which
is considered a legacy instance and is not tracked individually by
adv_instances list, previously it was assumed that hci_dev itself would
track it via HCI_LE_ADV but that is a global state not specifc to
instance 0x00, so to fix it a new flag is introduced that only tracks the
state of instance 0x00.
Fixes: 1488af7b8b ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO packets shall not use LE/ACL buffer pool, that feature seem to be
exclusive to LE-ACL only.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When a BIG sync is lost, the device should be set to "disconnected".
This ensures symmetry with the ISO path setup, where the device is
marked as "connected" once the path is established. Without this
change, the device state remains inconsistent and may lead to a
memory leak.
Fixes: b2a5f2e1c1 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if HCI_EV_NUM_COMP_PKTS contain an unbalanced
(more than currently considered outstanding) number of packets otherwise
it could cause the hcon->sent to underflow and loop around breaking the
tracking of the outstanding packets pending acknowledgment.
Fixes: f428091858 ("Bluetooth: Simplify num_comp_pkts_evt function")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When suspending, the disconnect command for an active Bluetooth
connection could be issued, but the corresponding
`HCI_EV_DISCONN_COMPLETE` event might not be received before the system
completes the suspend process. This can lead to an inconsistent state.
On resume, the controller may auto-accept reconnections from the same
device (due to suspend event filters), but these new connections are
rejected by the kernel which still has connection objects from before
suspend. Resulting in errors like:
```
kernel: Bluetooth: hci0: ACL packet for unknown connection handle 1
kernel: Bluetooth: hci0: Ignoring HCI_Connection_Complete for existing
connection
```
This is a btmon snippet that shows the issue:
```
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 1 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 2
Status: Success (0x00)
[...]
// Host suspends with the event filter set for the device
// On resume, the device tries to reconnect with a new handle
> HCI Event: Connect Complete (0x03) plen 11
Status: Success (0x00)
Handle: 2
Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
// Kernel ignores this event because there is an existing connection
with
// handle 1
```
By explicitly setting the connection state to BT_CLOSED we can ensure a
consistent state, even if we don't receive the disconnect complete event
in time.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the host sends an HCI_OP_DISCONNECT command, the controller may
respond with the status HCI_ERROR_UNKNOWN_CONN_ID (0x02). E.g. this can
happen on resume from suspend, if the link was terminated by the remote
device before the event mask was correctly set.
This is a btmon snippet that shows the issue:
```
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 5 len 4
Destination CID: 65
Source CID: 72
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 5 len 4
Destination CID: 65
Source CID: 72
> ACL Data RX: Handle 3 flags 0x02 dlen 12
L2CAP: Disconnection Request (0x06) ident 6 len 4
Destination CID: 64
Source CID: 71
< ACL Data TX: Handle 3 flags 0x00 dlen 12
L2CAP: Disconnection Response (0x07) ident 6 len 4
Destination CID: 64
Source CID: 71
< HCI Command: Set Event Mask (0x03|0x0001) plen 8
Mask: 0x3dbff807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
[...]
< HCI Command: Disconnect (0x01|0x0006) plen 3
Handle: 3 Address: 78:20:A5:4A:DF:28 (Nintendo Co.,Ltd)
Reason: Remote User Terminated Connection (0x13)
> HCI Event: Command Status (0x0f) plen 4
Disconnect (0x01|0x0006) ncmd 1
Status: Unknown Connection Identifier (0x02)
```
Currently, the hci_cs_disconnect function treats any non-zero status
as a command failure. This can be misleading because the connection is
indeed being terminated and the controller is confirming that is has no
knowledge of that connection handle. Meaning that the initial request of
disconnecting a device should be treated as done.
With this change we allow the function to proceed, following the success
path, which correctly calls `mgmt_device_disconnected` and ensures a
consistent state.
Link: https://github.com/bluez/bluez/issues/1226
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Ludovico de Nittis <ludovico.denittis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BN == 0x00 in CIS Established means no isochronous data for the
corresponding direction (Core v6.1 pp. 2394). In this case SDU MTU
should be 0.
However, the specification does not say the Max_PDU_C_To_P or P_To_C are
then zero. Intel AX210 in Framed CIS mode sets nonzero Max_PDU for
direction with zero BN. This causes failure later when we try to LE
Setup ISO Data Path for disabled direction, which is disallowed (Core
v6.1 pp. 2750).
Fix by setting SDU MTU to 0 if BN == 0.
Fixes: 2be22f1941 ("Bluetooth: hci_event: Fix parsing of CIS Established Event")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connections with type of PA_LINK shall be considered temporary just to
track the lifetime of PA Sync setup, once the BIG Sync is established
and connection are created with BIS_LINK the existing PA_LINK
connection shall not longer use bis_cleanup otherwise it terminates the
PA Sync when that shall be left to BIS_LINK connection to do it.
Fixes: a7bcffc673 ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, BIS_LINK is used for both BIG sync and PA sync connections,
which makes it impossible to distinguish them when searching for a PA
sync connection.
Adding PA_LINK will make the distinction clearer and simplify future
extensions for PA-related features.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Event_Type field in an LE Extended Advertising Report uses bits 5
and 6 for data status (e.g. truncation or fragmentation), not the PDU
type itself.
The ext_evt_type_to_legacy() function fails to mask these status bits
before evaluation. This causes valid advertisements with status bits set
(e.g. a truncated non-connectable advertisement, which ends up showing
as PDU type 0x40) to be misclassified as unknown and subsequently
dropped. This is okay for most checks which use bitwise AND on the
relevant event type bits, but it doesn't work for non-connectable types,
which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero).
In terms of behaviour, first the device sends a truncated report:
> HCI Event: LE Meta Event (0x3e) plen 26
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0040
Data status: Incomplete, data truncated, no more to come
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -98 dBm (0x9e)
Data length: 0x00
Then, a few seconds later, it sends the subsequent complete report:
> HCI Event: LE Meta Event (0x3e) plen 122
LE Extended Advertising Report (0x0d)
Entry 0
Event type: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 1D:12:46:FA:F8:6E (Non-Resolvable)
SID: 0x03
RSSI: -97 dBm (0x9f)
Data length: 0x60
Service Data: Google (0xfef3)
Data[92]: ...
These devices often send multiple truncated reports per second.
This patch introduces a PDU type mask to ensure only the relevant bits
are evaluated, allowing for the correct translation of all valid
extended advertising packets.
Fixes: b2cc9761f1 ("Bluetooth: Handle extended ADV PDU types")
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the BIS source stops, the controller sends an LE BIG Sync Lost
event (subevent 0x1E). Currently, this event is not handled, causing
the BIS stream to remain active in BlueZ and preventing recovery.
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_EV_EXTENDED_INQUIRY_RESULT's comment wrongly uses 0x2d as its event
code.
Use right 0x2f instead.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'quirks' member already ran out of bits on some platforms some time
ago. Replace the integer member by a bitmap in order to have enough bits
in future. Replace raw bit operations by accessor macros.
Fixes: ff26b2dd65 ("Bluetooth: Add quirk for broken READ_VOICE_SETTING")
Fixes: 127881334e ("Bluetooth: Add quirk for broken READ_PAGE_SCAN_TYPE")
Suggested-by: Pauli Virtanen <pav@iki.fi>
Tested-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Upon receiving HCI_EVT_LE_BIG_SYNC_ESTABLISHED with status 0x00
(success) the corresponding BIS hci_conn state shall be set to
BT_CONNECTED otherwise they will be left with BT_OPEN which is invalid
at that point, also create the debugfs and sysfs entries following the
same logic as the likes of Broadcast Source BIS and CIS connections.
Fixes: f777d88278 ("Bluetooth: ISO: Notify user space about failed bis connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently, for controllers with extended advertising, the advertising
data is set in the asynchronous response handler for extended
adverstising params. As most advertising settings are performed in a
synchronous context, the (asynchronous) setting of the advertising data
is done too late (after enabling the advertising).
Move setting of adverstising data from asynchronous response handler
into synchronous context to fix ordering of HCI commands.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: a0fb3726ba ("Bluetooth: Use Set ext adv/scan rsp data if controller supports")
Cc: stable@vger.kernel.org
v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Up until now it has been assumed that the application would be able to
enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has
no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry
it, so it was left unset (0x00) which means it would be unable to
synchronize if the broadcast source is using a different SID e.g. 0x04:
> HCI Event: LE Meta Event (0x3e) plen 57
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0000
Props: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Primary PHY: LE 1M
Secondary PHY: LE 2M
SID: 0x04
TX power: 127 dBm
RSSI: -55 dBm (0xc9)
Periodic advertising interval: 180.00 msec (0x0090)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x1f
06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c ..R.[....V....0L
75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61 uiz's S23 Ultra
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 14748507 (0xe10b5b)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0400
Unknown EIR field 0x30[16]: 4c75697a27732053323320556c747261
< HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x00 (<- Invalid)
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
So instead this changes now allow application to set HCI_SID_INVALID
which will make hci_le_pa_create_sync to wait for a report, update the
conn->sid using the report SID and only then issue PA create sync
command:
< HCI Command: LE Periodic Advertising Create Sync
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x04
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
> HCI Event: LE Meta Event (0x3e) plen 16
LE Periodic Advertising Sync Established (0x0e)
Status: Success (0x00)
Sync handle: 64
Advertising SID: 0x04
Advertiser address type: Random (0x01)
Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Advertiser PHY: LE 2M (0x02)
Periodic advertising interval: 180.00 msec (0x0090)
Advertiser clock accuracy: 0x05
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap:
Check encryption key size on incoming connection") introduced a check for
l2cap_check_enc_key_size which checks for hcon->enc_key_size which may
not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending.
If the key encryption size is known, due previously reading it using
HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk
structures so the next time the encryption is changed their values are
used as conn->enc_key_size thus avoiding the racing against
HCI_OP_READ_ENC_KEY_SIZE.
Now that the enc_size is stored as part of key the information the code
then attempts to check that there is no downgrade of security if
HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been
previously stored.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063
Fixes: 522e9ed157 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BIG Create Sync requires the command to just generates a status so this
makes use of __hci_cmd_sync_status_sk to wait for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the BIG sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 42ecf19471 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Broadcast Receiver requires creating PA sync but the command just
generates a status so this makes use of __hci_cmd_sync_status_sk to wait
for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not
longer necessary to use a custom method to serialize the process of
creating the PA sync since the cmd_work_sync itself ensures only one
command would be pending which now awaits for
HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection.
Fixes: 4a5e0ba686 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes sending MGMT_EV_DEVICE_FOUND for invalid address
(00:00:00:00:00:00) which is a regression introduced by
a2ec905d1e ("Bluetooth: fix kernel oops in store_pending_adv_report")
since in the attempt to skip storing data for extended advertisement it
actually made the code to skip the entire if statement supposed to send
MGMT_EV_DEVICE_FOUND without attempting to use the last_addr_adv which
is garanteed to be invalid for extended advertisement since we never
store anything on it.
Link: https://github.com/bluez/bluez/issues/1157
Link: https://github.com/bluez/bluez/issues/1149#issuecomment-2767215658
Fixes: a2ec905d1e ("Bluetooth: fix kernel oops in store_pending_adv_report")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some controllers seems to generate HCI_EV_LE_DIRECT_ADV_REPORT even when
scan_filter is not set to 0x02 or 0x03, which indicates that local
privacy is enabled, causing them to be ignored thus breaking
auto-connect logic:
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7
Type: Passive (0x00)
Interval: 60.000 msec (0x0060)
Window: 30.000 msec (0x0030)
Own address type: Public (0x00)
Filter policy: Ignore not in accept list (0x01)
...
> HCI Event: LE Meta Event (0x3e) plen 18
LE Direct Advertising Report (0x0b)
Num reports: 1
Event type: Connectable directed - ADV_DIRECT_IND (0x01)
Address type: Random (0x01)
Address: XX:XX:XX:XX:XX:XX (Static)
Direct address type: Random (0x01)
Direct address: XX:XX:XX:XX:XX:XX (Non-Resolvable)
RSSI: -54 dBm (0xca)
So this attempts to mitigate the above problem by skipping checking of
direct_addr if local privacy is not enabled.
Link: https://github.com/bluez/bluez/issues/1138
Fixes: e209e5ccc5 ("Bluetooth: MGMT: Mark LL Privacy as stable")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Support enabling TX timestamping for some skbs, and track them until
packet completion. Generate software SCM_TSTAMP_COMPLETION when getting
completion report from hardware.
Generate software SCM_TSTAMP_SND before sending to driver. Sending from
driver requires changes in the driver API, and drivers mostly are going
to send the skb immediately.
Make the default situation with no COMPLETION TX timestamping more
efficient by only counting packets in the queue when there is nothing to
track. When there is something to track, we need to make clones, since
the driver may modify sent skbs.
The tx_q queue length is bounded by the hdev flow control, which will
not send new packets before it has got completion reports for old ones.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Return Parameters is not only status, also bdaddr:
BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
page 1870:
BLUETOOTH CORE SPECIFICATION Version 5.0 | Vol 2, Part E
page 802:
Return parameters:
Status:
Size: 1 octet
BD_ADDR:
Size: 6 octets
Note that it also fixes the warning:
"Bluetooth: hci0: unexpected cc 0x041a length: 7 > 1"
Fixes: c8992cffbe ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A SCO connection without the proper voice_setting can cause
the controller to lock up.
Signed-off-by: Pedro Nishiyama <nishiyama.pedro@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Passive scanning shall only be enabled when disconnecting LE links,
otherwise it may start result in triggering scanning when e.g. an ISO
link disconnects:
> HCI Event: LE Meta Event (0x3e) plen 29
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
CIG Synchronization Delay: 0 us (0x000000)
CIS Synchronization Delay: 0 us (0x000000)
Central to Peripheral Latency: 10000 us (0x002710)
Peripheral to Central Latency: 10000 us (0x002710)
Central to Peripheral PHY: LE 2M (0x02)
Peripheral to Central PHY: LE 2M (0x02)
Number of Subevents: 1
Central to Peripheral Burst Number: 1
Peripheral to Central Burst Number: 1
Central to Peripheral Flush Timeout: 2
Peripheral to Central Flush Timeout: 2
Central to Peripheral MTU: 320
Peripheral to Central MTU: 160
ISO Interval: 10.00 msec (0x0008)
...
> HCI Event: Disconnect Complete (0x05) plen 4
Status: Success (0x00)
Handle: 257
Reason: Remote User Terminated Connection (0x13)
< HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6
Extended scan: Enabled (0x01)
Filter duplicates: Enabled (0x01)
Duration: 0 msec (0x0000)
Period: 0.00 sec (0x0000)
Fixes: 9fcb18ef3a ("Bluetooth: Introduce LE auto connect options")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is
not safe since for the most part entries fetched this way shall be
treated as rcu_dereference:
Note that the value returned by rcu_dereference() is valid
only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::
rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */
rcu_read_lock();
y = p->data; /* BUG!!! */
rcu_read_unlock();
Fixes: a0bfde167b ("Bluetooth: ISO: Add support for connecting multiple BISes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tim Bird
Jiajia Liu
Jann Horn
Luiz Augusto von Dentz
Shuvam Pandey
Pauli Virtanen
Oleh Konko
Raphael Pinsonneault-Thibeault
Yang Li
Ludovico de Nittis
Chris Down
Bastien Nocera
Zijun Hu
Christian Eggers
Wentao Guan
Pedro Nishiyama