commit 63f4970a1219b5256e8ea952096c86dab666d312 upstream.
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ca39500f6af9cfe6823dc5aa8fbaed788d6e35b2 ]
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bd ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6d7ea0881000966607772451b789b5fb5766f11d upstream.
[ 5.989588] psmouse serio1: synaptics: Your touchpad (PNP: TOS0213 PNP0f03) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[ 6.039923] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.32, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x52d884, board id: 3322, fw id: 2658004
The board is labelled TM3322.
Present on the Toshiba / Dynabook Portege X30-D and possibly others.
Confirmed working well with psmouse.synaptics_intertouch=1 and local build.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Link: https://lore.kernel.org/r/PN3PR01MB9597711E7933A08389FEC31DB888A@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ef46367073b107ec22f46fe5f12176e87c238e8 upstream.
The Share button, if present, is always one of two offsets from the end of the
file, depending on the presence of a specific interface. As we lack parsing for
the identify packet we can't automatically determine the presence of that
interface, but we can hardcode which of these offsets is correct for a given
controller.
More controllers are probably fixable by adding the MAP_SHARE_BUTTON in the
future, but for now I only added the ones that I have the ability to test
directly.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250328234345.989761-2-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11cdb506d0fbf5ac05bf55f5afcb3a215c316490 upstream.
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway.
Fixes: b581acb49a ("Input: mtk-pmic-keys - transfer per-key bit in mtk_pmic_keys_regs")
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d85862ccca452eeb19329e9f4f9a6ce1d1e53561 upstream.
Some older Clevo barebones have problems like no or laggy keyboard after
resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
quirk.
We could not activly retest these devices because we no longer have them in
our archive, but based on the other old Clevo barebones we tested where the
new quirk had the same or a better behaviour I think it would be good to
apply it on these too.
Cc: stable@vger.kernel.org
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://lore.kernel.org/r/20250221230137.70292-4-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95a54a96f657fd069d2a9922b6c2d293a72a001f upstream.
TECNO Pocket Go is a kickstarter handheld by manufacturer TECNO Mobile.
It poses a unique feature: it does not have a display. Instead, the
handheld is essentially a pc in a controller. As customary, it has an
xpad endpoint, a keyboard endpoint, and a vendor endpoint for its
vendor software.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250222170010.188761-3-lkml@antheas.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a2add513311b48cc924a699a8174db2c61ed5e8a upstream.
Some register groups reserve a byte at the end of their continuous
address space. Depending on the variant of silicon, this field may
share the same memory space as the lower byte of the system status
register (0x10).
In these cases, caching the reserved byte and writing it later may
effectively reset the device depending on what happened in between
the read and write operations.
Solve this problem by avoiding any access to this last byte within
offending register groups. This method replaces a workaround which
attempted to write the reserved byte with up-to-date contents, but
left a small window in which updates by the device could have been
clobbered.
Now that the driver does not touch these reserved bytes, the order
in which the device's registers are written no longer matters, and
they can be written in their natural order. The new method is also
much more generic, and can be more easily extended to new variants
of silicon with different register maps.
As part of this change, the register read and write functions must
be gently updated to support byte access instead of word access.
Fixes: 2e70ef525b ("Input: iqs7222 - acknowledge reset before writing registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Z85Alw+d9EHKXx2e@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 08bd5b7c9a2401faabdaa1472d45c7de0755fd7e ]
When enabling a pass-through port an interrupt might come before psmouse
driver binds to the pass-through port. However synaptics sub-driver
tries to access psmouse instance presumably associated with the
pass-through port to figure out if only 1 byte of response or entire
protocol packet needs to be forwarded to the pass-through port and may
crash if psmouse instance has not been attached to the port yet.
Fix the crash by introducing open() and close() methods for the port and
check if the port is open before trying to access psmouse instance.
Because psmouse calls serio_open() only after attaching psmouse instance
to serio port instance this prevents the potential crash.
Reported-by: Takashi Iwai <tiwai@suse.de>
Fixes: 100e16959c ("Input: libps2 - attach ps2dev instances as serio port's drvdata")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219522
Cc: stable@vger.kernel.org
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/Z4qSHORvPn7EU2j1@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 66372fa9936088bf29c4f47907efeff03c51a2c8 upstream.
8BitDo Pro 2 Wired Controller shares the same USB identifier
(2dc8:3106) as a different device, so amend name to reflect that and
reduce confusion as the user might think the controller was misdetected.
Because Pro 2 Wired will not work in XTYPE_XBOXONE mode (button presses
won't register), tagging it as XTYPE_XBOX360 remains appropriate.
Signed-off-by: Leonardo Brondani Schenkel <leonardo@schenkel.net>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20250107192830.414709-2-rojtberg@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 907bc9268a5a9f823ffa751957a5c1dd59f83f42 upstream.
Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a
dedicated keycode, and multiple vendors have their keyboards emit this
sequence in response to users pressing a dedicated "Copilot" key.
Unfortunately the default keymap table in atkbd does not map scancode
0x6e (F23) and so the key combination does not work even if userspace
is ready to handle it.
Because this behavior is common between multiple vendors and the
scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that
key sequence is generated properly.
MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical.
Tested on Lenovo T14s G6 AMD.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250107034554.25843-1-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
Commit d469647baf ("Input: simplify event handling logic") introduced
code that would set handler->events() method to either
input_handler_events_filter() or input_handler_events_default() or
input_handler_events_null(), depending on the kind of input handler
(a filter or a regular one) we are dealing with. Unfortunately this
breaks cases when we try to re-register the same filter (as is the case
with sysrq handler): after initial registration the handler will have 2
event handling methods defined, and will run afoul of the check in
input_handler_check_methods():
input: input_handler_check_methods: only one event processing method can be defined (sysrq)
sysrq: Failed to register input handler, error -22
Fix this by adding handle_events() method to input_handle structure and
setting it up when registering a new input handle according to event
handling methods defined in associated input_handler structure, thus
avoiding modifying the input_handler structure.
Reported-by: "Ned T. Crigler" <crigler@gmail.com>
Reported-by: Christian Heusel <christian@heusel.eu>
Tested-by: "Ned T. Crigler" <crigler@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Fixes: d469647baf ("Input: simplify event handling logic")
Link: https://lore.kernel.org/r/Zx2iQp6csn42PJA7@xavtug
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit dc748812fc ("Input: adp5588-keys - add support for pure gpio")
made having interrupt line optional for the device, however it neglected
to update suspend and resume handlers that try to disable interrupts
for the duration of suspend.
Fix this by checking if interrupt number assigned to the i2c device is
not 0 before trying to disable or reenable it.
Fixes: dc748812fc ("Input: adp5588-keys - add support for pure gpio")
Link: https://lore.kernel.org/r/Zv_2jEMYSWDw2gKs@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver neglects to free the instance of I2C regmap constructed at
the beginning of the edt_ft5x06_ts_probe() method when probe fails.
Additionally edt_ft5x06_ts_remove() is freeing the regmap too early,
before the rest of the device resources that are managed by devm are
released.
Fix this by installing a custom devm action that will ensure that the
regmap is released at the right time during normal teardown as well as
in case of probe failure.
Note that devm_regmap_init_i2c() could not be used because the driver
may replace the original regmap with a regmap specific for M06 devices
in the middle of the probe, and using devm_regmap_init_i2c() would
result in releasing the M06 regmap too early.
Reported-by: Li Zetao <lizetao1@huawei.com>
Fixes: 9dfd9708ff ("Input: edt-ft5x06 - convert to use regmap API")
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
Link: https://lore.kernel.org/r/ZxL6rIlVlgsAu-Jv@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov:
- a fix for Zinitix driver to not fail probing if the property enabling
touch keys functionality is not defined. Support for touch keys was
added in 6.12 merge window so this issue does not affect users of
released kernels
- a couple new vendor/device IDs in xpad driver to enable support for
more hardware
* tag 'input-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - don't fail if linux,keycodes prop is absent
Input: xpad - add support for MSI Claw A1M
Input: xpad - add support for 8BitDo Ultimate 2C Wireless Controller
