Merge branch 'topic/xilinx' into for-linus

Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt

@@ -1,46 +1,96 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
 Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
 target devices. It can be configured to have one channel or two channels.
 If configured as two channels, one is to transmit to the device and another
 is to receive from the device.
 
+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
 Required properties:
-- compatible: Should be "xlnx,axi-dma-1.00.a"
+- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
+	      "xlnx,axi-cdma-1.00.a""
 - #dma-cells: Should be <1>, see "dmas" property below
-- reg: Should contain DMA registers location and length.
+- reg: Should contain VDMA registers location and length.
+- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
+- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
 - dma-channel child node: Should have at least one channel and can have up to
 	two channels per device. This node specifies the properties of each
 	DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+	For VDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+	For CDMA:
+	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+	FOR AXIDMA:
+	Required elements: "s_axi_lite_aclk"
+	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+			   "m_axi_sg_aclk"
+
+Required properties for VDMA:
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
 
 Optional properties:
-- xlnx,include-sg: Tells whether configured for Scatter-mode in
+- xlnx,include-sg: Tells configured for Scatter-mode in
 	the hardware.
+Optional properties for AXI DMA:
+- xlnx,mcdma: Tells whether configured for multi-channel mode in the hardware.
+Optional properties for VDMA:
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+	It takes following values:
+	{1}, flush both channels
+	{2}, flush mm2s channel
+	{3}, flush s2mm channel
 
 Required child node properties:
-- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or
+- compatible:
+	For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
+	"xlnx,axi-vdma-s2mm-channel".
+	For CDMA: It should be "xlnx,axi-cdma-channel".
+	For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or
 	"xlnx,axi-dma-s2mm-channel".
-- interrupts: Should contain per channel DMA interrupts.
+- interrupts: Should contain per channel VDMA interrupts.
 - xlnx,datawidth: Should contain the stream data width, take values
 	{32,64...1024}.
 
-Option child node properties:
+Optional child node properties:
-- xlnx,include-dre: Tells whether hardware is configured for Data
+- xlnx,include-dre: Tells hardware is configured for Data
 	Realignment Engine.
+Optional child node properties for VDMA:
+- xlnx,genlock-mode: Tells Genlock synchronization is
+	enabled/disabled in hardware.
+Optional child node properties for AXI DMA:
+-dma-channels: Number of dma channels in child node.
 
 Example:
 ++++++++
 
-axi_dma_0: axidma@40400000 {
+axi_vdma_0: axivdma@40030000 {
-	compatible = "xlnx,axi-dma-1.00.a";
+	compatible = "xlnx,axi-vdma-1.00.a";
 	#dma_cells = <1>;
-	reg = < 0x40400000 0x10000 >;
+	reg = < 0x40030000 0x10000 >;
-	dma-channel@40400000 {
+	dma-ranges = <0x00000000 0x00000000 0x40000000>;
-		compatible = "xlnx,axi-dma-mm2s-channel";
+	xlnx,num-fstores = <0x8>;
-		interrupts = < 0 59 4 >;
+	xlnx,flush-fsync = <0x1>;
+	xlnx,addrwidth = <0x20>;
+	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
+	dma-channel@40030000 {
+		compatible = "xlnx,axi-vdma-mm2s-channel";
+		interrupts = < 0 54 4 >;
 		xlnx,datawidth = <0x40>;
 	} ;
-	dma-channel@40400030 {
+	dma-channel@40030030 {
-		compatible = "xlnx,axi-dma-s2mm-channel";
+		compatible = "xlnx,axi-vdma-s2mm-channel";
-		interrupts = < 0 58 4 >;
+		interrupts = < 0 53 4 >;
 		xlnx,datawidth = <0x40>;
 	} ;
 } ;
@@ -49,7 +99,7 @@ axi_dma_0: axidma@40400000 {
 * DMA client
 
 Required properties:
-- dmas: a list of <[DMA device phandle] [Channel ID]> pairs,
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
 	where Channel ID is '0' for write/tx and '1' for read/rx
 	channel.
 - dma-names: a list of DMA channel names, one per "dmas" entry
@@ -57,9 +107,9 @@ Required properties:
 Example:
 ++++++++
 
-dmatest_0: dmatest@0 {
+vdmatest_0: vdmatest@0 {
-	compatible ="xlnx,axi-dma-test-1.00.a";
+	compatible ="xlnx,axi-vdma-test-1.00.a";
-	dmas = <&axi_dma_0 0
+	dmas = <&axi_vdma_0 0
-		&axi_dma_0 1>;
+		&axi_vdma_0 1>;
-	dma-names = "dma0", "dma1";
+	dma-names = "vdma0", "vdma1";
 } ;

Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt

@@ -1,107 +0,0 @@
-Xilinx AXI VDMA engine, it does transfers between memory and video devices.
-It can be configured to have one channel or two channels. If configured
-as two channels, one is to transmit to the video device and another is
-to receive from the video device.
-
-Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
-target devices. It can be configured to have one channel or two channels.
-If configured as two channels, one is to transmit to the device and another
-is to receive from the device.
-
-Xilinx AXI CDMA engine, it does transfers between memory-mapped source
-address and a memory-mapped destination address.
-
-Required properties:
-- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or
-	      "xlnx,axi-cdma-1.00.a""
-- #dma-cells: Should be <1>, see "dmas" property below
-- reg: Should contain VDMA registers location and length.
-- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
-- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
-- dma-channel child node: Should have at least one channel and can have up to
-	two channels per device. This node specifies the properties of each
-	DMA channel (see child node properties below).
-- clocks: Input clock specifier. Refer to common clock bindings.
-- clock-names: List of input clocks
-	For VDMA:
-	Required elements: "s_axi_lite_aclk"
-	Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
-			   "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
-	For CDMA:
-	Required elements: "s_axi_lite_aclk", "m_axi_aclk"
-	FOR AXIDMA:
-	Required elements: "s_axi_lite_aclk"
-	Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
-			   "m_axi_sg_aclk"
-
-Required properties for VDMA:
-- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
-
-Optional properties:
-- xlnx,include-sg: Tells configured for Scatter-mode in
-	the hardware.
-Optional properties for VDMA:
-- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
-	It takes following values:
-	{1}, flush both channels
-	{2}, flush mm2s channel
-	{3}, flush s2mm channel
-
-Required child node properties:
-- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
-	"xlnx,axi-vdma-s2mm-channel".
-- interrupts: Should contain per channel VDMA interrupts.
-- xlnx,datawidth: Should contain the stream data width, take values
-	{32,64...1024}.
-
-Optional child node properties:
-- xlnx,include-dre: Tells hardware is configured for Data
-	Realignment Engine.
-Optional child node properties for VDMA:
-- xlnx,genlock-mode: Tells Genlock synchronization is
-	enabled/disabled in hardware.
-
-Example:
-++++++++
-
-axi_vdma_0: axivdma@40030000 {
-	compatible = "xlnx,axi-vdma-1.00.a";
-	#dma_cells = <1>;
-	reg = < 0x40030000 0x10000 >;
-	dma-ranges = <0x00000000 0x00000000 0x40000000>;
-	xlnx,num-fstores = <0x8>;
-	xlnx,flush-fsync = <0x1>;
-	xlnx,addrwidth = <0x20>;
-	clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
-	clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
-		      "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
-	dma-channel@40030000 {
-		compatible = "xlnx,axi-vdma-mm2s-channel";
-		interrupts = < 0 54 4 >;
-		xlnx,datawidth = <0x40>;
-	} ;
-	dma-channel@40030030 {
-		compatible = "xlnx,axi-vdma-s2mm-channel";
-		interrupts = < 0 53 4 >;
-		xlnx,datawidth = <0x40>;
-	} ;
-} ;
-
-
-* DMA client
-
-Required properties:
-- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
-	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
-- dma-names: a list of DMA channel names, one per "dmas" entry
-
-Example:
-++++++++
-
-vdmatest_0: vdmatest@0 {
-	compatible ="xlnx,axi-vdma-test-1.00.a";
-	dmas = <&axi_vdma_0 0
-		&axi_vdma_0 1>;
-	dma-names = "vdma0", "vdma1";
-} ;

Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt

@@ -0,0 +1,27 @@
+Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
+memory to device and device to memory transfers. It also has flow
+control and rate control support for slave/peripheral dma access.
+
+Required properties:
+- compatible		: Should be "xlnx,zynqmp-dma-1.0"
+- reg			: Memory map for gdma/adma module access.
+- interrupt-parent	: Interrupt controller the interrupt is routed through
+- interrupts		: Should contain DMA channel interrupt.
+- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
+- clock-names		: List of input clocks "clk_main", "clk_apb"
+			  (see clock bindings for details)
+
+Optional properties:
+- dma-coherent		: Present if dma operations are coherent.
+
+Example:
+++++++++
+fpd_dma_chan1: dma@fd500000 {
+	compatible = "xlnx,zynqmp-dma-1.0";
+	reg = <0x0 0xFD500000 0x1000>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 117 4>;
+	clock-names = "clk_main", "clk_apb";
+	xlnx,bus-width = <128>;
+	dma-coherent;
+};

drivers/dma/Kconfig

@@ -533,19 +533,31 @@ config XGENE_DMA
 	help
 	  Enable support for the APM X-Gene SoC DMA engine.
 
-config XILINX_VDMA
+config XILINX_DMA
-	tristate "Xilinx AXI VDMA Engine"
+	tristate "Xilinx AXI DMAS Engine"
 	depends on (ARCH_ZYNQ || MICROBLAZE || ARM64)
 	select DMA_ENGINE
 	help
 	  Enable support for Xilinx AXI VDMA Soft IP.
 
-	  This engine provides high-bandwidth direct memory access
+	  AXI VDMA engine provides high-bandwidth direct memory access
 	  between memory and AXI4-Stream video type target
 	  peripherals including peripherals which support AXI4-
 	  Stream Video Protocol.  It has two stream interfaces/
 	  channels, Memory Mapped to Stream (MM2S) and Stream to
 	  Memory Mapped (S2MM) for the data transfers.
+	  AXI CDMA engine provides high-bandwidth direct memory access
+	  between a memory-mapped source address and a memory-mapped
+	  destination address.
+	  AXI DMA engine provides high-bandwidth one dimensional direct
+	  memory access between memory and AXI4-Stream target peripherals.
+
+config XILINX_ZYNQMP_DMA
+	tristate "Xilinx ZynqMP DMA Engine"
+	depends on (ARCH_ZYNQ || MICROBLAZE || ARM64)
+	select DMA_ENGINE
+	help
+	  Enable support for Xilinx ZynqMP DMA controller.
 
 config ZX_DMA
 	tristate "ZTE ZX296702 DMA support"

drivers/dma/xilinx/Makefile

@@ -1 +1,2 @@
-obj-$(CONFIG_XILINX_VDMA) += xilinx_vdma.o
+obj-$(CONFIG_XILINX_DMA) += xilinx_dma.o
+obj-$(CONFIG_XILINX_ZYNQMP_DMA) += zynqmp_dma.o

drivers/dma/xilinx/xilinx_dma.c

@@ -45,6 +45,7 @@
 #include <linux/of_irq.h>
 #include <linux/slab.h>
 #include <linux/clk.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 
 #include "../dmaengine.h"
 
@@ -113,7 +114,7 @@
 #define XILINX_VDMA_REG_START_ADDRESS_64(n)	(0x000c + 8 * (n))
 
 /* HW specific definitions */
-#define XILINX_DMA_MAX_CHANS_PER_DEVICE	0x2
+#define XILINX_DMA_MAX_CHANS_PER_DEVICE	0x20
 
 #define XILINX_DMA_DMAXR_ALL_IRQ_MASK	\
 		(XILINX_DMA_DMASR_FRM_CNT_IRQ | \
@@ -157,12 +158,25 @@
 /* AXI DMA Specific Masks/Bit fields */
 #define XILINX_DMA_MAX_TRANS_LEN	GENMASK(22, 0)
 #define XILINX_DMA_CR_COALESCE_MAX	GENMASK(23, 16)
+#define XILINX_DMA_CR_CYCLIC_BD_EN_MASK	BIT(4)
 #define XILINX_DMA_CR_COALESCE_SHIFT	16
 #define XILINX_DMA_BD_SOP		BIT(27)
 #define XILINX_DMA_BD_EOP		BIT(26)
 #define XILINX_DMA_COALESCE_MAX		255
 #define XILINX_DMA_NUM_APP_WORDS	5
 
+/* Multi-Channel DMA Descriptor offsets*/
+#define XILINX_DMA_MCRX_CDESC(x)	(0x40 + (x-1) * 0x20)
+#define XILINX_DMA_MCRX_TDESC(x)	(0x48 + (x-1) * 0x20)
+
+/* Multi-Channel DMA Masks/Shifts */
+#define XILINX_DMA_BD_HSIZE_MASK	GENMASK(15, 0)
+#define XILINX_DMA_BD_STRIDE_MASK	GENMASK(15, 0)
+#define XILINX_DMA_BD_VSIZE_MASK	GENMASK(31, 19)
+#define XILINX_DMA_BD_TDEST_MASK	GENMASK(4, 0)
+#define XILINX_DMA_BD_STRIDE_SHIFT	0
+#define XILINX_DMA_BD_VSIZE_SHIFT	19
+
 /* AXI CDMA Specific Registers/Offsets */
 #define XILINX_CDMA_REG_SRCADDR		0x18
 #define XILINX_CDMA_REG_DSTADDR		0x20
@@ -194,22 +208,22 @@ struct xilinx_vdma_desc_hw {
 /**
  * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
  * @next_desc: Next Descriptor Pointer @0x00
- * @pad1: Reserved @0x04
+ * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
  * @buf_addr: Buffer address @0x08
- * @pad2: Reserved @0x0C
+ * @buf_addr_msb: MSB of Buffer address @0x0C
- * @pad3: Reserved @0x10
+ * @pad1: Reserved @0x10
- * @pad4: Reserved @0x14
+ * @pad2: Reserved @0x14
  * @control: Control field @0x18
  * @status: Status field @0x1C
  * @app: APP Fields @0x20 - 0x30
  */
 struct xilinx_axidma_desc_hw {
 	u32 next_desc;
-	u32 pad1;
+	u32 next_desc_msb;
 	u32 buf_addr;
-	u32 pad2;
+	u32 buf_addr_msb;
-	u32 pad3;
+	u32 mcdma_control;
-	u32 pad4;
+	u32 vsize_stride;
 	u32 control;
 	u32 status;
 	u32 app[XILINX_DMA_NUM_APP_WORDS];
@@ -218,21 +232,21 @@ struct xilinx_axidma_desc_hw {
 /**
  * struct xilinx_cdma_desc_hw - Hardware Descriptor
  * @next_desc: Next Descriptor Pointer @0x00
- * @pad1: Reserved @0x04
+ * @next_descmsb: Next Descriptor Pointer MSB @0x04
  * @src_addr: Source address @0x08
- * @pad2: Reserved @0x0C
+ * @src_addrmsb: Source address MSB @0x0C
  * @dest_addr: Destination address @0x10
- * @pad3: Reserved @0x14
+ * @dest_addrmsb: Destination address MSB @0x14
  * @control: Control field @0x18
  * @status: Status field @0x1C
  */
 struct xilinx_cdma_desc_hw {
 	u32 next_desc;
-	u32 pad1;
+	u32 next_desc_msb;
 	u32 src_addr;
-	u32 pad2;
+	u32 src_addr_msb;
 	u32 dest_addr;
-	u32 pad3;
+	u32 dest_addr_msb;
 	u32 control;
 	u32 status;
 } __aligned(64);
@@ -278,11 +292,13 @@ struct xilinx_cdma_tx_segment {
  * @async_tx: Async transaction descriptor
  * @segments: TX segments list
  * @node: Node in the channel descriptors list
+ * @cyclic: Check for cyclic transfers.
  */
 struct xilinx_dma_tx_descriptor {
 	struct dma_async_tx_descriptor async_tx;
 	struct list_head segments;
 	struct list_head node;
+	bool cyclic;
 };
 
 /**
@@ -302,6 +318,7 @@ struct xilinx_dma_tx_descriptor {
  * @direction: Transfer direction
  * @num_frms: Number of frames
  * @has_sg: Support scatter transfers
+ * @cyclic: Check for cyclic transfers.
  * @genlock: Support genlock mode
  * @err: Channel has errors
  * @tasklet: Cleanup work after irq
@@ -312,6 +329,7 @@ struct xilinx_dma_tx_descriptor {
  * @desc_submitcount: Descriptor h/w submitted count
  * @residue: Residue for AXI DMA
  * @seg_v: Statically allocated segments base
+ * @cyclic_seg_v: Statically allocated segment base for cyclic transfers
  * @start_transfer: Differentiate b/w DMA IP's transfer
  */
 struct xilinx_dma_chan {
@@ -330,6 +348,7 @@ struct xilinx_dma_chan {
 	enum dma_transfer_direction direction;
 	int num_frms;
 	bool has_sg;
+	bool cyclic;
 	bool genlock;
 	bool err;
 	struct tasklet_struct tasklet;
@@ -340,7 +359,9 @@ struct xilinx_dma_chan {
 	u32 desc_submitcount;
 	u32 residue;
 	struct xilinx_axidma_tx_segment *seg_v;
+	struct xilinx_axidma_tx_segment *cyclic_seg_v;
 	void (*start_transfer)(struct xilinx_dma_chan *chan);
+	u16 tdest;
 };
 
 struct xilinx_dma_config {
@@ -357,6 +378,7 @@ struct xilinx_dma_config {
  * @common: DMA device structure
  * @chan: Driver specific DMA channel
  * @has_sg: Specifies whether Scatter-Gather is present or not
+ * @mcdma: Specifies whether Multi-Channel is present or not
  * @flush_on_fsync: Flush on frame sync
  * @ext_addr: Indicates 64 bit addressing is supported by dma device
  * @pdev: Platform device structure pointer
@@ -366,6 +388,8 @@ struct xilinx_dma_config {
  * @txs_clk: DMA mm2s stream clock
  * @rx_clk: DMA s2mm clock
  * @rxs_clk: DMA s2mm stream clock
+ * @nr_channels: Number of channels DMA device supports
+ * @chan_id: DMA channel identifier
  */
 struct xilinx_dma_device {
 	void __iomem *regs;
@@ -373,6 +397,7 @@ struct xilinx_dma_device {
 	struct dma_device common;
 	struct xilinx_dma_chan *chan[XILINX_DMA_MAX_CHANS_PER_DEVICE];
 	bool has_sg;
+	bool mcdma;
 	u32 flush_on_fsync;
 	bool ext_addr;
 	struct platform_device  *pdev;
@@ -382,6 +407,8 @@ struct xilinx_dma_device {
 	struct clk *txs_clk;
 	struct clk *rx_clk;
 	struct clk *rxs_clk;
+	u32 nr_channels;
+	u32 chan_id;
 };
 
 /* Macros */
@@ -454,6 +481,34 @@ static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
 	writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
 }
 
+static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
+{
+	lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
+}
+
+static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
+				dma_addr_t addr)
+{
+	if (chan->ext_addr)
+		dma_writeq(chan, reg, addr);
+	else
+		dma_ctrl_write(chan, reg, addr);
+}
+
+static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
+				     struct xilinx_axidma_desc_hw *hw,
+				     dma_addr_t buf_addr, size_t sg_used,
+				     size_t period_len)
+{
+	if (chan->ext_addr) {
+		hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
+		hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
+						 period_len);
+	} else {
+		hw->buf_addr = buf_addr + sg_used + period_len;
+	}
+}
+
 /* -----------------------------------------------------------------------------
  * Descriptors and segments alloc and free
  */
@@ -491,11 +546,10 @@ xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
 	struct xilinx_cdma_tx_segment *segment;
 	dma_addr_t phys;
 
-	segment = dma_pool_alloc(chan->desc_pool, GFP_ATOMIC, &phys);
+	segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
 	if (!segment)
 		return NULL;
 
-	memset(segment, 0, sizeof(*segment));
 	segment->phys = phys;
 
 	return segment;
@@ -513,11 +567,10 @@ xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
 	struct xilinx_axidma_tx_segment *segment;
 	dma_addr_t phys;
 
-	segment = dma_pool_alloc(chan->desc_pool, GFP_ATOMIC, &phys);
+	segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
 	if (!segment)
 		return NULL;
 
-	memset(segment, 0, sizeof(*segment));
 	segment->phys = phys;
 
 	return segment;
@@ -660,12 +713,36 @@ static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
 	dev_dbg(chan->dev, "Free all channel resources.\n");
 
 	xilinx_dma_free_descriptors(chan);
-	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+		xilinx_dma_free_tx_segment(chan, chan->cyclic_seg_v);
 		xilinx_dma_free_tx_segment(chan, chan->seg_v);
+	}
 	dma_pool_destroy(chan->desc_pool);
 	chan->desc_pool = NULL;
 }
 
+/**
+ * xilinx_dma_chan_handle_cyclic - Cyclic dma callback
+ * @chan: Driver specific dma channel
+ * @desc: dma transaction descriptor
+ * @flags: flags for spin lock
+ */
+static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
+					  struct xilinx_dma_tx_descriptor *desc,
+					  unsigned long *flags)
+{
+	dma_async_tx_callback callback;
+	void *callback_param;
+
+	callback = desc->async_tx.callback;
+	callback_param = desc->async_tx.callback_param;
+	if (callback) {
+		spin_unlock_irqrestore(&chan->lock, *flags);
+		callback(callback_param);
+		spin_lock_irqsave(&chan->lock, *flags);
+	}
+}
+
 /**
  * xilinx_dma_chan_desc_cleanup - Clean channel descriptors
  * @chan: Driver specific DMA channel
@@ -681,6 +758,11 @@ static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
 		dma_async_tx_callback callback;
 		void *callback_param;
 
+		if (desc->cyclic) {
+			xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
+			break;
+		}
+
 		/* Remove from the list of running transactions */
 		list_del(&desc->node);
 
@@ -757,7 +839,7 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 		return -ENOMEM;
 	}
 
-	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		/*
 		 * For AXI DMA case after submitting a pending_list, keep
 		 * an extra segment allocated so that the "next descriptor"
@@ -768,6 +850,15 @@ static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
 		 */
 		chan->seg_v = xilinx_axidma_alloc_tx_segment(chan);
 
+		/*
+		 * For cyclic DMA mode we need to program the tail Descriptor
+		 * register with a value which is not a part of the BD chain
+		 * so allocating a desc segment during channel allocation for
+		 * programming tail descriptor.
+		 */
+		chan->cyclic_seg_v = xilinx_axidma_alloc_tx_segment(chan);
+	}
+
 	dma_cookie_init(dchan);
 
 	if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
@@ -1065,12 +1156,12 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
 	}
 
 	if (chan->has_sg) {
-		dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
+		xilinx_write(chan, XILINX_DMA_REG_CURDESC,
-			   head_desc->async_tx.phys);
+			     head_desc->async_tx.phys);
 
 		/* Update tail ptr register which will start the transfer */
-		dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
+		xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
-			       tail_segment->phys);
+			     tail_segment->phys);
 	} else {
 		/* In simple mode */
 		struct xilinx_cdma_tx_segment *segment;
@@ -1082,8 +1173,8 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
 
 		hw = &segment->hw;
 
-		dma_ctrl_write(chan, XILINX_CDMA_REG_SRCADDR, hw->src_addr);
+		xilinx_write(chan, XILINX_CDMA_REG_SRCADDR, hw->src_addr);
-		dma_ctrl_write(chan, XILINX_CDMA_REG_DSTADDR, hw->dest_addr);
+		xilinx_write(chan, XILINX_CDMA_REG_DSTADDR, hw->dest_addr);
 
 		/* Start the transfer */
 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
@@ -1124,18 +1215,20 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 	tail_segment = list_last_entry(&tail_desc->segments,
 				       struct xilinx_axidma_tx_segment, node);
 
-	old_head = list_first_entry(&head_desc->segments,
+	if (chan->has_sg && !chan->xdev->mcdma) {
-				struct xilinx_axidma_tx_segment, node);
+		old_head = list_first_entry(&head_desc->segments,
-	new_head = chan->seg_v;
+					struct xilinx_axidma_tx_segment, node);
-	/* Copy Buffer Descriptor fields. */
+		new_head = chan->seg_v;
-	new_head->hw = old_head->hw;
+		/* Copy Buffer Descriptor fields. */
+		new_head->hw = old_head->hw;
 
-	/* Swap and save new reserve */
+		/* Swap and save new reserve */
-	list_replace_init(&old_head->node, &new_head->node);
+		list_replace_init(&old_head->node, &new_head->node);
-	chan->seg_v = old_head;
+		chan->seg_v = old_head;
 
-	tail_segment->hw.next_desc = chan->seg_v->phys;
+		tail_segment->hw.next_desc = chan->seg_v->phys;
-	head_desc->async_tx.phys = new_head->phys;
+		head_desc->async_tx.phys = new_head->phys;
+	}
 
 	reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
 
@@ -1146,9 +1239,25 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
 	}
 
-	if (chan->has_sg)
+	if (chan->has_sg && !chan->xdev->mcdma)
-		dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
+		xilinx_write(chan, XILINX_DMA_REG_CURDESC,
-			       head_desc->async_tx.phys);
+			     head_desc->async_tx.phys);
+
+	if (chan->has_sg && chan->xdev->mcdma) {
+		if (chan->direction == DMA_MEM_TO_DEV) {
+			dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
+				       head_desc->async_tx.phys);
+		} else {
+			if (!chan->tdest) {
+				dma_ctrl_write(chan, XILINX_DMA_REG_CURDESC,
+				       head_desc->async_tx.phys);
+			} else {
+				dma_ctrl_write(chan,
+					XILINX_DMA_MCRX_CDESC(chan->tdest),
+				       head_desc->async_tx.phys);
+			}
+		}
+	}
 
 	xilinx_dma_start(chan);
 
@@ -1156,9 +1265,27 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 		return;
 
 	/* Start the transfer */
-	if (chan->has_sg) {
+	if (chan->has_sg && !chan->xdev->mcdma) {
-		dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
+		if (chan->cyclic)
+			xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
+				     chan->cyclic_seg_v->phys);
+		else
+			xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
+				     tail_segment->phys);
+	} else if (chan->has_sg && chan->xdev->mcdma) {
+		if (chan->direction == DMA_MEM_TO_DEV) {
+			dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
 			       tail_segment->phys);
+		} else {
+			if (!chan->tdest) {
+				dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
+					       tail_segment->phys);
+			} else {
+				dma_ctrl_write(chan,
+					XILINX_DMA_MCRX_TDESC(chan->tdest),
+					tail_segment->phys);
+			}
+		}
 	} else {
 		struct xilinx_axidma_tx_segment *segment;
 		struct xilinx_axidma_desc_hw *hw;
@@ -1168,7 +1295,7 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
 					   node);
 		hw = &segment->hw;
 
-		dma_ctrl_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr);
+		xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr);
 
 		/* Start the transfer */
 		dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
@@ -1209,7 +1336,8 @@ static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
 
 	list_for_each_entry_safe(desc, next, &chan->active_list, node) {
 		list_del(&desc->node);
-		dma_cookie_complete(&desc->async_tx);
+		if (!desc->cyclic)
+			dma_cookie_complete(&desc->async_tx);
 		list_add_tail(&desc->node, &chan->done_list);
 	}
 }
@@ -1397,6 +1525,11 @@ static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	unsigned long flags;
 	int err;
 
+	if (chan->cyclic) {
+		xilinx_dma_free_tx_descriptor(chan, desc);
+		return -EBUSY;
+	}
+
 	if (chan->err) {
 		/*
 		 * If reset fails, need to hard reset the system.
@@ -1414,6 +1547,9 @@ static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	/* Put this transaction onto the tail of the pending queue */
 	append_desc_queue(chan, desc);
 
+	if (desc->cyclic)
+		chan->cyclic = true;
+
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	return cookie;
@@ -1541,6 +1677,10 @@ xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
 	hw->control = len;
 	hw->src_addr = dma_src;
 	hw->dest_addr = dma_dst;
+	if (chan->ext_addr) {
+		hw->src_addr_msb = upper_32_bits(dma_src);
+		hw->dest_addr_msb = upper_32_bits(dma_dst);
+	}
 
 	/* Fill the previous next descriptor with current */
 	prev = list_last_entry(&desc->segments,
@@ -1623,7 +1763,8 @@ static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
 			hw = &segment->hw;
 
 			/* Fill in the descriptor */
-			hw->buf_addr = sg_dma_address(sg) + sg_used;
+			xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
+					  sg_used, 0);
 
 			hw->control = copy;
 
@@ -1668,6 +1809,194 @@ error:
 	return NULL;
 }
 
+/**
+ * xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: transfer ack flags
+ */
+static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
+	struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
+	size_t period_len, enum dma_transfer_direction direction,
+	unsigned long flags)
+{
+	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+	struct xilinx_dma_tx_descriptor *desc;
+	struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
+	size_t copy, sg_used;
+	unsigned int num_periods;
+	int i;
+	u32 reg;
+
+	if (!period_len)
+		return NULL;
+
+	num_periods = buf_len / period_len;
+
+	if (!num_periods)
+		return NULL;
+
+	if (!is_slave_direction(direction))
+		return NULL;
+
+	/* Allocate a transaction descriptor. */
+	desc = xilinx_dma_alloc_tx_descriptor(chan);
+	if (!desc)
+		return NULL;
+
+	chan->direction = direction;
+	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+
+	for (i = 0; i < num_periods; ++i) {
+		sg_used = 0;
+
+		while (sg_used < period_len) {
+			struct xilinx_axidma_desc_hw *hw;
+
+			/* Get a free segment */
+			segment = xilinx_axidma_alloc_tx_segment(chan);
+			if (!segment)
+				goto error;
+
+			/*
+			 * Calculate the maximum number of bytes to transfer,
+			 * making sure it is less than the hw limit
+			 */
+			copy = min_t(size_t, period_len - sg_used,
+				     XILINX_DMA_MAX_TRANS_LEN);
+			hw = &segment->hw;
+			xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
+					  period_len * i);
+			hw->control = copy;
+
+			if (prev)
+				prev->hw.next_desc = segment->phys;
+
+			prev = segment;
+			sg_used += copy;
+
+			/*
+			 * Insert the segment into the descriptor segments
+			 * list.
+			 */
+			list_add_tail(&segment->node, &desc->segments);
+		}
+	}
+
+	head_segment = list_first_entry(&desc->segments,
+				   struct xilinx_axidma_tx_segment, node);
+	desc->async_tx.phys = head_segment->phys;
+
+	desc->cyclic = true;
+	reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+	reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
+	dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
+
+	segment = list_last_entry(&desc->segments,
+				  struct xilinx_axidma_tx_segment,
+				  node);
+	segment->hw.next_desc = (u32) head_segment->phys;
+
+	/* For the last DMA_MEM_TO_DEV transfer, set EOP */
+	if (direction == DMA_MEM_TO_DEV) {
+		head_segment->hw.control |= XILINX_DMA_BD_SOP;
+		segment->hw.control |= XILINX_DMA_BD_EOP;
+	}
+
+	return &desc->async_tx;
+
+error:
+	xilinx_dma_free_tx_descriptor(chan, desc);
+	return NULL;
+}
+
+/**
+ * xilinx_dma_prep_interleaved - prepare a descriptor for a
+ *	DMA_SLAVE transaction
+ * @dchan: DMA channel
+ * @xt: Interleaved template pointer
+ * @flags: transfer ack flags
+ *
+ * Return: Async transaction descriptor on success and NULL on failure
+ */
+static struct dma_async_tx_descriptor *
+xilinx_dma_prep_interleaved(struct dma_chan *dchan,
+				 struct dma_interleaved_template *xt,
+				 unsigned long flags)
+{
+	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+	struct xilinx_dma_tx_descriptor *desc;
+	struct xilinx_axidma_tx_segment *segment;
+	struct xilinx_axidma_desc_hw *hw;
+
+	if (!is_slave_direction(xt->dir))
+		return NULL;
+
+	if (!xt->numf || !xt->sgl[0].size)
+		return NULL;
+
+	if (xt->frame_size != 1)
+		return NULL;
+
+	/* Allocate a transaction descriptor. */
+	desc = xilinx_dma_alloc_tx_descriptor(chan);
+	if (!desc)
+		return NULL;
+
+	chan->direction = xt->dir;
+	dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
+	desc->async_tx.tx_submit = xilinx_dma_tx_submit;
+
+	/* Get a free segment */
+	segment = xilinx_axidma_alloc_tx_segment(chan);
+	if (!segment)
+		goto error;
+
+	hw = &segment->hw;
+
+	/* Fill in the descriptor */
+	if (xt->dir != DMA_MEM_TO_DEV)
+		hw->buf_addr = xt->dst_start;
+	else
+		hw->buf_addr = xt->src_start;
+
+	hw->mcdma_control = chan->tdest & XILINX_DMA_BD_TDEST_MASK;
+	hw->vsize_stride = (xt->numf << XILINX_DMA_BD_VSIZE_SHIFT) &
+			    XILINX_DMA_BD_VSIZE_MASK;
+	hw->vsize_stride |= (xt->sgl[0].icg + xt->sgl[0].size) &
+			    XILINX_DMA_BD_STRIDE_MASK;
+	hw->control = xt->sgl[0].size & XILINX_DMA_BD_HSIZE_MASK;
+
+	/*
+	 * Insert the segment into the descriptor segments
+	 * list.
+	 */
+	list_add_tail(&segment->node, &desc->segments);
+
+
+	segment = list_first_entry(&desc->segments,
+				   struct xilinx_axidma_tx_segment, node);
+	desc->async_tx.phys = segment->phys;
+
+	/* For the last DMA_MEM_TO_DEV transfer, set EOP */
+	if (xt->dir == DMA_MEM_TO_DEV) {
+		segment->hw.control |= XILINX_DMA_BD_SOP;
+		segment = list_last_entry(&desc->segments,
+					  struct xilinx_axidma_tx_segment,
+					  node);
+		segment->hw.control |= XILINX_DMA_BD_EOP;
+	}
+
+	return &desc->async_tx;
+
+error:
+	xilinx_dma_free_tx_descriptor(chan, desc);
+	return NULL;
+}
+
 /**
  * xilinx_dma_terminate_all - Halt the channel and free descriptors
  * @chan: Driver specific DMA Channel pointer
@@ -1675,6 +2004,10 @@ error:
 static int xilinx_dma_terminate_all(struct dma_chan *dchan)
 {
 	struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
+	u32 reg;
+
+	if (chan->cyclic)
+		xilinx_dma_chan_reset(chan);
 
 	/* Halt the DMA engine */
 	xilinx_dma_halt(chan);
@@ -1682,6 +2015,13 @@ static int xilinx_dma_terminate_all(struct dma_chan *dchan)
 	/* Remove and free all of the descriptors in the lists */
 	xilinx_dma_free_descriptors(chan);
 
+	if (chan->cyclic) {
+		reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
+		reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
+		dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
+		chan->cyclic = false;
+	}
+
 	return 0;
 }
 
@@ -1972,7 +2312,7 @@ static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
  * Return: '0' on success and failure value on error
  */
 static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
-				  struct device_node *node)
+				  struct device_node *node, int chan_id)
 {
 	struct xilinx_dma_chan *chan;
 	bool has_dre = false;
@@ -2014,9 +2354,12 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 	if (!has_dre)
 		xdev->common.copy_align = fls(width - 1);
 
-	if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel")) {
+	if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
+	    of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
+	    of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
 		chan->direction = DMA_MEM_TO_DEV;
-		chan->id = 0;
+		chan->id = chan_id;
+		chan->tdest = chan_id;
 
 		chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
 		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2027,9 +2370,12 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 				chan->flush_on_fsync = true;
 		}
 	} else if (of_device_is_compatible(node,
-					    "xlnx,axi-vdma-s2mm-channel")) {
+					   "xlnx,axi-vdma-s2mm-channel") ||
+		   of_device_is_compatible(node,
+					   "xlnx,axi-dma-s2mm-channel")) {
 		chan->direction = DMA_DEV_TO_MEM;
-		chan->id = 1;
+		chan->id = chan_id;
+		chan->tdest = chan_id - xdev->nr_channels;
 
 		chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
 		if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -2083,6 +2429,32 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
 	return 0;
 }
 
+/**
+ * xilinx_dma_child_probe - Per child node probe
+ * It get number of dma-channels per child node from
+ * device-tree and initializes all the channels.
+ *
+ * @xdev: Driver specific device structure
+ * @node: Device node
+ *
+ * Return: 0 always.
+ */
+static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
+				    struct device_node *node) {
+	int ret, i, nr_channels = 1;
+
+	ret = of_property_read_u32(node, "dma-channels", &nr_channels);
+	if ((ret < 0) && xdev->mcdma)
+		dev_warn(xdev->dev, "missing dma-channels property\n");
+
+	for (i = 0; i < nr_channels; i++)
+		xilinx_dma_chan_probe(xdev, node, xdev->chan_id++);
+
+	xdev->nr_channels += nr_channels;
+
+	return 0;
+}
+
 /**
  * of_dma_xilinx_xlate - Translation function
  * @dma_spec: Pointer to DMA specifier as found in the device tree
@@ -2096,7 +2468,7 @@ static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
 	struct xilinx_dma_device *xdev = ofdma->of_dma_data;
 	int chan_id = dma_spec->args[0];
 
-	if (chan_id >= XILINX_DMA_MAX_CHANS_PER_DEVICE || !xdev->chan[chan_id])
+	if (chan_id >= xdev->nr_channels || !xdev->chan[chan_id])
 		return NULL;
 
 	return dma_get_slave_channel(&xdev->chan[chan_id]->common);
@@ -2172,6 +2544,8 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->has_sg = of_property_read_bool(node, "xlnx,include-sg");
+	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
+		xdev->mcdma = of_property_read_bool(node, "xlnx,mcdma");
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 		err = of_property_read_u32(node, "xlnx,num-fstores",
@@ -2218,7 +2592,12 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.device_tx_status = xilinx_dma_tx_status;
 	xdev->common.device_issue_pending = xilinx_dma_issue_pending;
 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
+		dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
 		xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
+		xdev->common.device_prep_dma_cyclic =
+					  xilinx_dma_prep_dma_cyclic;
+		xdev->common.device_prep_interleaved_dma =
+					xilinx_dma_prep_interleaved;
 		/* Residue calculation is supported by only AXI DMA */
 		xdev->common.residue_granularity =
 					  DMA_RESIDUE_GRANULARITY_SEGMENT;
@@ -2234,13 +2613,13 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Initialize the channels */
 	for_each_child_of_node(node, child) {
-		err = xilinx_dma_chan_probe(xdev, child);
+		err = xilinx_dma_child_probe(xdev, child);
 		if (err < 0)
 			goto disable_clks;
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
-		for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
+		for (i = 0; i < xdev->nr_channels; i++)
 			if (xdev->chan[i])
 				xdev->chan[i]->num_frms = num_frames;
 	}
@@ -2263,7 +2642,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 disable_clks:
 	xdma_disable_allclks(xdev);
 error:
-	for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
+	for (i = 0; i < xdev->nr_channels; i++)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
 
@@ -2285,7 +2664,7 @@ static int xilinx_dma_remove(struct platform_device *pdev)
 
 	dma_async_device_unregister(&xdev->common);
 
-	for (i = 0; i < XILINX_DMA_MAX_CHANS_PER_DEVICE; i++)
+	for (i = 0; i < xdev->nr_channels; i++)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);