Merge tag 'soc-arm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC ARM platform updates from Arnd Bergmann:
 "Most of these updates are for removing dead code on the Samsung S3C,
  NXP i.MX, TI OMAP and TI DaVinci platforms, though this appears to be
  a coincidence.

  There are also cleanups for the Marvell Orion family and the Arm
  integrator series and a Kconfig change for Broadcom"

* tag 'soc-arm-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dove: Drop a write-only variable
  ARM: orion5x: Switch to new sys-off handler API
  ARM: mvebu: Warn about memory chunks too small for DDR training
  ARM: imx: Annotate imx7d_enet_init() as __init
  ARM: OMAP1: Remove unused declarations in arch/arm/mach-omap1/pm.h
  ARM: s3c: remove unused s3c2410_cpu_suspend() declaration
  ARM: s3c: remove unused declarations for s3c6400
  ARM: s3c: Remove unused s3c_init_uart_irqs() declaration
  ARM: davinci: remove unused cpuidle code
  ARM: davinci: remove unused davinci_init_ide() declaration
  ARM: davinci: remove unused davinci_cfg_reg_list() declaration
  ARM: mach-imx: imx6sx: Remove Ethernet refclock setting
  MAINTAINERS: Add entry for Samsung Exynos850 SoC
  ARM: bcm: Select ARM_GIC_V3 for ARCH_BRCMSTB
  ARM: omap2: Switch to use kmemdup_array()
  ARM: omap1: Remove unused struct 'dma_link_info'
  ARM: s3c: Drop explicit initialization of struct i2c_device_id::driver_data to 0

MAINTAINERS

@@ -20243,6 +20243,16 @@ B:	mailto:linux-samsung-soc@vger.kernel.org
 F:	Documentation/devicetree/bindings/sound/samsung*
 F:	sound/soc/samsung/
 
+SAMSUNG EXYNOS850 SoC SUPPORT
+M:	Sam Protsenko <semen.protsenko@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
+F:	arch/arm64/boot/dts/exynos/exynos850*
+F:	drivers/clk/samsung/clk-exynos850.c
+F:	include/dt-bindings/clock/exynos850.h
+
 SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
 M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-crypto@vger.kernel.org

arch/arm/mach-bcm/Kconfig

@@ -185,6 +185,7 @@ config ARCH_BRCMSTB
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GIC_V3
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ZONE_DMA if ARM_LPAE

arch/arm/mach-davinci/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o pdata-quirks.o
 obj-y					+= da8xx-dt.o
 
 # Power Management
-obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_HAVE_CLK)			+= pm_domain.o
 ifeq ($(CONFIG_SUSPEND),y)
 obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= pm.o sleep.o

arch/arm/mach-davinci/common.h

@@ -52,7 +52,6 @@ struct davinci_soc_info {
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(const struct davinci_soc_info *soc_info);
-extern void davinci_init_ide(void);
 void davinci_init_late(void);
 
 #ifdef CONFIG_SUSPEND

arch/arm/mach-davinci/cpuidle.c

@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * CPU idle for DaVinci SoCs
- *
- * Copyright (C) 2009 Texas Instruments Incorporated. https://www.ti.com/
- *
- * Derived from Marvell Kirkwood CPU idle code
- * (arch/arm/mach-kirkwood/cpuidle.c)
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/cpuidle.h>
-
-#include "cpuidle.h"
-#include "ddr2.h"
-
-#define DAVINCI_CPUIDLE_MAX_STATES	2
-
-static void __iomem *ddr2_reg_base;
-static bool ddr2_pdown;
-
-static void davinci_save_ddr_power(int enter, bool pdown)
-{
-	u32 val;
-
-	val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
-
-	if (enter) {
-		if (pdown)
-			val |= DDR2_SRPD_BIT;
-		else
-			val &= ~DDR2_SRPD_BIT;
-		val |= DDR2_LPMODEN_BIT;
-	} else {
-		val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
-	}
-
-	__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
-}
-
-/* Actual code that puts the SoC in different idle states */
-static __cpuidle int davinci_enter_idle(struct cpuidle_device *dev,
-					struct cpuidle_driver *drv, int index)
-{
-	davinci_save_ddr_power(1, ddr2_pdown);
-	cpu_do_idle();
-	davinci_save_ddr_power(0, ddr2_pdown);
-
-	return index;
-}
-
-static struct cpuidle_driver davinci_idle_driver = {
-	.name			= "cpuidle-davinci",
-	.owner			= THIS_MODULE,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= davinci_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 10000,
-		.name			= "DDR SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = DAVINCI_CPUIDLE_MAX_STATES,
-};
-
-static int __init davinci_cpuidle_probe(struct platform_device *pdev)
-{
-	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "cannot get platform data\n");
-		return -ENOENT;
-	}
-
-	ddr2_reg_base = pdata->ddr2_ctlr_base;
-
-	ddr2_pdown = pdata->ddr2_pdown;
-
-	return cpuidle_register(&davinci_idle_driver, NULL);
-}
-
-static struct platform_driver davinci_cpuidle_driver = {
-	.driver = {
-		.name	= "cpuidle-davinci",
-	},
-};
-
-static int __init davinci_cpuidle_init(void)
-{
-	return platform_driver_probe(&davinci_cpuidle_driver,
-						davinci_cpuidle_probe);
-}
-device_initcall(davinci_cpuidle_init);
-

arch/arm/mach-davinci/cpuidle.h

@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * TI DaVinci cpuidle platform support
- *
- * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
- */
-#ifndef _MACH_DAVINCI_CPUIDLE_H
-#define _MACH_DAVINCI_CPUIDLE_H
-
-struct davinci_cpuidle_config {
-	u32 ddr2_pdown;
-	void __iomem *ddr2_ctlr_base;
-};
-
-#endif

arch/arm/mach-davinci/devices-da8xx.c

@@ -21,7 +21,6 @@
 #include "common.h"
 #include "cputype.h"
 #include "da8xx.h"
-#include "cpuidle.h"
 #include "irqs.h"
 #include "sram.h"
 

arch/arm/mach-davinci/mux.h

@@ -654,14 +654,9 @@ enum davinci_da850_index {
 #ifdef CONFIG_DAVINCI_MUX
 /* setup pin muxing */
 extern int davinci_cfg_reg(unsigned long reg_cfg);
-extern int davinci_cfg_reg_list(const short pins[]);
 #else
 /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
 static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
-static inline int davinci_cfg_reg_list(const short pins[])
-{
-	return 0;
-}
 #endif
 
 

arch/arm/mach-dove/common.c

@@ -82,7 +82,7 @@ static void __init dove_clk_init(void)
 {
 	struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
 	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
-	struct clk *xor0, *xor1, *ge, *gephy;
+	struct clk *xor0, *xor1, *ge;
 
 	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk);
 
@@ -102,7 +102,7 @@ static void __init dove_clk_init(void)
 	pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
 	xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
 	xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
-	gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+	dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
 	ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
 
 	orion_clkdev_add(NULL, "orion_spi.0", tclk);

arch/arm/mach-imx/mach-imx6sx.c

@@ -7,37 +7,15 @@
 #include <linux/of_platform.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
 #include "cpuidle.h"
 
-static void __init imx6sx_enet_clk_sel(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
-	if (!IS_ERR(gpr)) {
-		regmap_update_bits(gpr, IOMUXC_GPR1,
-				   IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0);
-		regmap_update_bits(gpr, IOMUXC_GPR1,
-				   IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0);
-	} else {
-		pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
-	}
-}
-
-static inline void imx6sx_enet_init(void)
-{
-	imx6sx_enet_clk_sel();
-}
-
 static void __init imx6sx_init_machine(void)
 {
 	of_platform_default_populate(NULL, NULL, NULL);
 
-	imx6sx_enet_init();
 	imx_anatop_init();
 	imx6sx_pm_init();
 }

arch/arm/mach-imx/mach-imx7d.c

@@ -48,7 +48,7 @@ static void __init imx7d_enet_clk_sel(void)
 	}
 }
 
-static inline void imx7d_enet_init(void)
+static void __init imx7d_enet_init(void)
 {
 	imx7d_enet_phy_init();
 	imx7d_enet_clk_sel();

arch/arm/mach-mvebu/board-v7.c

@@ -86,6 +86,9 @@ static int __init mvebu_scan_mem(unsigned long node, const char *uname,
 		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
 		size = dt_mem_next_cell(dt_root_size_cells, &reg);
 
+		if (size < MVEBU_DDR_TRAINING_AREA_SZ)
+			pr_warn("Too little memory to reserve for DDR training\n");
+
 		memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
 	}
 

arch/arm/mach-omap1/omap-dma.c

@@ -59,19 +59,6 @@ static struct omap_dma_dev_attr *d;
 static int enable_1510_mode;
 static u32 errata;
 
-struct dma_link_info {
-	int *linked_dmach_q;
-	int no_of_lchs_linked;
-
-	int q_count;
-	int q_tail;
-	int q_head;
-
-	int chain_state;
-	int chain_mode;
-
-};
-
 static int dma_lch_count;
 static int dma_chan_count;
 static int omap_dma_reserve_channels;

arch/arm/mach-omap1/pm.h

@@ -114,13 +114,9 @@ extern void omap1_pm_suspend(void);
 
 extern void omap1510_cpu_suspend(unsigned long, unsigned long);
 extern void omap1610_cpu_suspend(unsigned long, unsigned long);
-extern void omap1510_idle_loop_suspend(void);
-extern void omap1610_idle_loop_suspend(void);
 
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap1510_idle_loop_suspend_sz;
-extern unsigned int omap1610_idle_loop_suspend_sz;
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 extern void omap_serial_wake_trigger(int enable);

arch/arm/mach-omap2/omap_device.c

@@ -315,7 +315,7 @@ static struct omap_device *omap_device_alloc(struct platform_device *pdev,
 
 	od->hwmods_cnt = oh_cnt;
 
-	hwmods = kmemdup(ohs, sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL);
+	hwmods = kmemdup_array(ohs, oh_cnt, sizeof(*hwmods), GFP_KERNEL);
 	if (!hwmods)
 		goto oda_exit2;
 

arch/arm/mach-orion5x/board-mss2.c

@@ -82,5 +82,5 @@ static void mss2_power_off(void)
 void __init mss2_init(void)
 {
 	/* register mss2 specific power-off method */
-	pm_power_off = mss2_power_off;
+	register_platform_power_off(mss2_power_off);
 }

arch/arm/mach-orion5x/dns323-setup.c

@@ -700,7 +700,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323a_power_off;
+		register_platform_power_off(dns323a_power_off);
 		break;
 	case DNS323_REV_B1:
 		/* 5182 built-in SATA init */
@@ -717,7 +717,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323b_power_off;
+		register_platform_power_off(dns323b_power_off);
 		break;
 	case DNS323_REV_C1:
 		/* 5182 built-in SATA init */
@@ -727,7 +727,7 @@ static void __init dns323_init(void)
 		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
 			pr_err("DNS-323: failed to setup power-off GPIO\n");
-		pm_power_off = dns323c_power_off;
+		register_platform_power_off(dns323c_power_off);
 
 		/* Now, -this- should theoretically be done by the sata_mv driver
 		 * once I figure out what's going on there. Maybe the behaviour

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void)
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
 
 	/* register Kurobox Pro specific power-off method */
-	pm_power_off = kurobox_pro_power_off;
+	register_platform_power_off(kurobox_pro_power_off);
 }
 
 #ifdef CONFIG_MACH_KUROBOX_PRO

arch/arm/mach-orion5x/mv2120-setup.c

@@ -238,7 +238,7 @@ static void __init mv2120_init(void)
 	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
 		pr_err("mv2120: failed to setup power-off GPIO\n");
-	pm_power_off = mv2120_power_off;
+	register_platform_power_off(mv2120_power_off);
 }
 
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */

arch/arm/mach-orion5x/net2big-setup.c

@@ -423,7 +423,7 @@ static void __init net2big_init(void)
 
 	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
 	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
-		pm_power_off = net2big_power_off;
+		register_platform_power_off(net2big_power_off);
 	else
 		pr_err("net2big: failed to configure power-off GPIO\n");
 

arch/arm/mach-orion5x/terastation_pro2-setup.c

@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
 	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
 
 	/* register Terastation Pro II specific power-off method */
-	pm_power_off = tsp2_power_off;
+	register_platform_power_off(tsp2_power_off);
 }
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")

arch/arm/mach-orion5x/ts209-setup.c

@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_platform_power_off(qnap_tsx09_power_off);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")

arch/arm/mach-orion5x/ts409-setup.c

@@ -312,7 +312,7 @@ static void __init qnap_ts409_init(void)
 	platform_device_register(&ts409_leds);
 
 	/* register tsx09 specific power-off method */
-	pm_power_off = qnap_tsx09_power_off;
+	register_platform_power_off(qnap_tsx09_power_off);
 }
 
 MACHINE_START(TS409, "QNAP TS-409")

arch/arm/mach-s3c/irq-uart-s3c64xx.h

@@ -12,5 +12,3 @@ struct s3c_uart_irq {
 	unsigned int	 parent_irq;
 };
 
-extern void s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs);
-

arch/arm/mach-s3c/mach-crag6410-module.c

@@ -446,7 +446,7 @@ static int wlf_gf_module_probe(struct i2c_client *i2c)
 }
 
 static const struct i2c_device_id wlf_gf_module_id[] = {
-	{ "wlf-gf-module", 0 },
+	{ "wlf-gf-module" },
 	{ }
 };
 

arch/arm/mach-s3c/pm.h

@@ -48,8 +48,6 @@ extern unsigned long s3c_pm_flags;
 
 /* from sleep.S */
 
-extern int s3c2410_cpu_suspend(unsigned long);
-
 #ifdef CONFIG_PM_SLEEP
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern void s3c_cpu_resume(void);

arch/arm/mach-s3c/s3c64xx.h

@@ -23,17 +23,6 @@ struct device_node;
 void s3c64xx_set_xtal_freq(unsigned long freq);
 void s3c64xx_set_xusbxti_freq(unsigned long freq);
 
-#ifdef CONFIG_CPU_S3C6400
-
-extern  int s3c6400_init(void);
-extern void s3c6400_init_irq(void);
-extern void s3c6400_map_io(void);
-
-#else
-#define s3c6400_map_io NULL
-#define s3c6400_init NULL
-#endif
-
 #ifdef CONFIG_CPU_S3C6410
 
 extern  int s3c6410_init(void);