From d52459ca3047435aa5d7957e50857fc7ba193411 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 23 Jul 2013 20:21:11 -0500 Subject: [PATCH 01/11] powerpc/fsl-booke: Work around erratum A-006958 Erratum A-006598 says that 64-bit mftb is not atomic -- it's subject to a similar race condition as doing mftbu/mftbl on 32-bit. The lower half of timebase is updated before the upper half; thus, we can share the workaround for a similar bug on Cell. This workaround involves looping if the lower half of timebase is zero, thus avoiding the need for a scratch register (other than CR0). This workaround must be avoided when the timebase is frozen, such as during the timebase sync code. This deals with kernel and vdso accesses, but other userspace accesses will of course need to be fixed elsewhere. Signed-off-by: Scott Wood --- arch/powerpc/include/asm/cputable.h | 9 +++++++-- arch/powerpc/include/asm/ppc_asm.h | 2 +- arch/powerpc/include/asm/reg.h | 2 +- arch/powerpc/platforms/85xx/smp.c | 23 +++++++++++++++++++++++ 4 files changed, 32 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 6f3887d884d2..0d4939ba48e7 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -371,14 +371,19 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_E500MC (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL | CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV) +/* + * e5500/e6500 erratum A-006958 is a timebase bug that can use the + * same workaround as CPU_FTR_CELL_TB_BUG. + */ #define CPU_FTRS_E5500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ - CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV) + CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_CELL_TB_BUG) #define CPU_FTRS_E6500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ - CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP) + CPU_FTR_DEBUG_LVL_EXC | CPU_FTR_EMB_HV | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_CELL_TB_BUG) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 4ebb4f8f4188..8fdd3da134e0 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -431,7 +431,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) #define ISYNC_601 #endif -#ifdef CONFIG_PPC_CELL +#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E) #define MFTB(dest) \ 90: mftb dest; \ BEGIN_FTR_SECTION_NESTED(96); \ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a312e0c8cef4..55b03079d197 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1117,7 +1117,7 @@ : "memory") #ifdef __powerpc64__ -#ifdef CONFIG_PPC_CELL +#if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E) #define mftb() ({unsigned long rval; \ asm volatile( \ "90: mftb %0;\n" \ diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index ea9c6269ead0..ea7e62910891 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -69,7 +69,30 @@ static void mpc85xx_give_timebase(void) tb_req = 0; mpc85xx_timebase_freeze(1); +#ifdef CONFIG_PPC64 + /* + * e5500/e6500 have a workaround for erratum A-006958 in place + * that will reread the timebase until TBL is non-zero. + * That would be a bad thing when the timebase is frozen. + * + * Thus, we read it manually, and instead of checking that + * TBL is non-zero, we ensure that TB does not change. We don't + * do that for the main mftb implementation, because it requires + * a scratch register + */ + { + u64 prev; + + asm volatile("mftb %0" : "=r" (timebase)); + + do { + prev = timebase; + asm volatile("mftb %0" : "=r" (timebase)); + } while (prev != timebase); + } +#else timebase = get_tb(); +#endif mb(); tb_valid = 1; From beb2dc0a7a84be003ce54e98b95d65cc66e6e536 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 20 Aug 2013 19:33:12 -0500 Subject: [PATCH 02/11] powerpc: Convert some mftb/mftbu into mfspr Some CPUs (such as e500v1/v2) don't implement mftb and will take a trap. mfspr should work on everything that has a timebase, and is the preferred instruction according to ISA v2.06. Currently we get away with mftb on 85xx because the assembler converts it to mfspr due to -Wa,-me500. However, that flag has other effects that are undesireable for certain targets (e.g. lwsync is converted to sync), and is hostile to multiplatform kernels. Thus we would like to stop setting it for all e500-family builds. mftb/mftbu instances which are in 85xx code or common code are converted. Instances which will never run on 85xx are left alone. Signed-off-by: Scott Wood --- arch/powerpc/boot/ppc_asm.h | 3 +++ arch/powerpc/boot/util.S | 10 +++++----- arch/powerpc/include/asm/ppc_asm.h | 4 ++-- arch/powerpc/include/asm/reg.h | 15 ++++++++++----- arch/powerpc/include/asm/timex.h | 4 ++-- arch/powerpc/kernel/vdso32/gettimeofday.S | 6 +++--- arch/powerpc/platforms/85xx/smp.c | 6 ++++-- 7 files changed, 29 insertions(+), 19 deletions(-) diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h index 1c2c2817f9b7..eb0e98be69e0 100644 --- a/arch/powerpc/boot/ppc_asm.h +++ b/arch/powerpc/boot/ppc_asm.h @@ -59,4 +59,7 @@ #define r30 30 #define r31 31 +#define SPRN_TBRL 268 +#define SPRN_TBRU 269 + #endif /* _PPC64_PPC_ASM_H */ diff --git a/arch/powerpc/boot/util.S b/arch/powerpc/boot/util.S index 427ddfc11991..5143228e3e5f 100644 --- a/arch/powerpc/boot/util.S +++ b/arch/powerpc/boot/util.S @@ -71,18 +71,18 @@ udelay: add r4,r4,r5 addi r4,r4,-1 divw r4,r4,r5 /* BUS ticks */ -1: mftbu r5 - mftb r6 - mftbu r7 +1: mfspr r5, SPRN_TBRU + mfspr r6, SPRN_TBRL + mfspr r7, SPRN_TBRU cmpw 0,r5,r7 bne 1b /* Get [synced] base time */ addc r9,r6,r4 /* Compute end time */ addze r8,r5 -2: mftbu r5 +2: mfspr r5, SPRN_TBRU cmpw 0,r5,r8 blt 2b bgt 3f - mftb r6 + mfspr r6, SPRN_TBRL cmpw 0,r6,r9 blt 2b 3: blr diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 8fdd3da134e0..599545738af3 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -433,13 +433,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) #if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E) #define MFTB(dest) \ -90: mftb dest; \ +90: mfspr dest, SPRN_TBRL; \ BEGIN_FTR_SECTION_NESTED(96); \ cmpwi dest,0; \ beq- 90b; \ END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96) #else -#define MFTB(dest) mftb dest +#define MFTB(dest) mfspr dest, SPRN_TBRL #endif #ifndef CONFIG_SMP diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 55b03079d197..64264bf601f5 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1120,7 +1120,7 @@ #if defined(CONFIG_PPC_CELL) || defined(CONFIG_PPC_FSL_BOOK3E) #define mftb() ({unsigned long rval; \ asm volatile( \ - "90: mftb %0;\n" \ + "90: mfspr %0, %2;\n" \ "97: cmpwi %0,0;\n" \ " beq- 90b;\n" \ "99:\n" \ @@ -1134,18 +1134,23 @@ " .llong 0\n" \ " .llong 0\n" \ ".previous" \ - : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) + : "=r" (rval) \ + : "i" (CPU_FTR_CELL_TB_BUG), "i" (SPRN_TBRL)); \ + rval;}) #else #define mftb() ({unsigned long rval; \ - asm volatile("mftb %0" : "=r" (rval)); rval;}) + asm volatile("mfspr %0, %1" : \ + "=r" (rval) : "i" (SPRN_TBRL)); rval;}) #endif /* !CONFIG_PPC_CELL */ #else /* __powerpc64__ */ #define mftbl() ({unsigned long rval; \ - asm volatile("mftbl %0" : "=r" (rval)); rval;}) + asm volatile("mfspr %0, %1" : "=r" (rval) : \ + "i" (SPRN_TBRL)); rval;}) #define mftbu() ({unsigned long rval; \ - asm volatile("mftbu %0" : "=r" (rval)); rval;}) + asm volatile("mfspr %0, %1" : "=r" (rval) : \ + "i" (SPRN_TBRU)); rval;}) #endif /* !__powerpc64__ */ #define mttbl(v) asm volatile("mttbl %0":: "r"(v)) diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h index c55e14f7ef44..18908caa1f3b 100644 --- a/arch/powerpc/include/asm/timex.h +++ b/arch/powerpc/include/asm/timex.h @@ -29,7 +29,7 @@ static inline cycles_t get_cycles(void) ret = 0; __asm__ __volatile__( - "97: mftb %0\n" + "97: mfspr %0, %2\n" "99:\n" ".section __ftr_fixup,\"a\"\n" ".align 2\n" @@ -41,7 +41,7 @@ static inline cycles_t get_cycles(void) " .long 0\n" " .long 0\n" ".previous" - : "=r" (ret) : "i" (CPU_FTR_601)); + : "=r" (ret) : "i" (CPU_FTR_601), "i" (SPRN_TBRL)); return ret; #endif } diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 27e2f623210b..6b1f2a6d5517 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -232,9 +232,9 @@ __do_get_tspec: lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) /* Get a stable TB value */ -2: mftbu r3 - mftbl r4 - mftbu r0 +2: mfspr r3, SPRN_TBRU + mfspr r4, SPRN_TBRL + mfspr r0, SPRN_TBRU cmplw cr0,r3,r0 bne- 2b diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c index ea7e62910891..281b7f01df63 100644 --- a/arch/powerpc/platforms/85xx/smp.c +++ b/arch/powerpc/platforms/85xx/smp.c @@ -83,11 +83,13 @@ static void mpc85xx_give_timebase(void) { u64 prev; - asm volatile("mftb %0" : "=r" (timebase)); + asm volatile("mfspr %0, %1" : "=r" (timebase) : + "i" (SPRN_TBRL)); do { prev = timebase; - asm volatile("mftb %0" : "=r" (timebase)); + asm volatile("mfspr %0, %1" : "=r" (timebase) : + "i" (SPRN_TBRL)); } while (prev != timebase); } #else From f49596a4cf4753d13951608f24f939a59fdcc653 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 20 Aug 2013 19:53:10 -0500 Subject: [PATCH 03/11] powerpc/85xx: Remove -Wa,-me500 This caused lwsync to be converted to sync on 64-bit (on 32-bit lwsync is generated at runtime, and so wasn't affected). Not using lwsync caused a significant slowdown on certain workloads. Setting this flag for any e500-enabled build is also not friendly to multiplatform kernels. Signed-off-by: Scott Wood --- arch/powerpc/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 967fd23ace78..6930c935d292 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -139,7 +139,6 @@ endif cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec -cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_E200) += -Wa,-me200 KBUILD_AFLAGS += $(cpu-as-y) From 01718ba6ec30013c7d47084876b9c16471b291af Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 20 Aug 2013 19:55:36 -0500 Subject: [PATCH 04/11] powerpc/booke64: Use appropriate -mcpu By default use -mcpu=powerpc64 rather than -mtune=power7 Add options for e5500/e6500, with fallbacks for older compilers. Hide the POWER cpu options in booke configs. Signed-off-by: Scott Wood --- arch/powerpc/Makefile | 9 +++++++++ arch/powerpc/platforms/Kconfig.cputype | 13 +++++++++++++ 2 files changed, 22 insertions(+) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 6930c935d292..32dfd5dc2be6 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -88,13 +88,22 @@ CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions) CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple +ifeq ($(CONFIG_PPC_BOOK3S_64),y) CFLAGS-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=power7,-mtune=power4) +else +CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64 +endif + CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell) CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4) CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6) CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7) +E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64) +CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU) +CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU)) + CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell) KBUILD_CPPFLAGS += -Iarch/$(ARCH) diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 47d9a03dd415..6704e2e20e6b 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -96,18 +96,31 @@ config GENERIC_CPU config CELL_CPU bool "Cell Broadband Engine" + depends on PPC_BOOK3S_64 config POWER4_CPU bool "POWER4" + depends on PPC_BOOK3S_64 config POWER5_CPU bool "POWER5" + depends on PPC_BOOK3S_64 config POWER6_CPU bool "POWER6" + depends on PPC_BOOK3S_64 config POWER7_CPU bool "POWER7" + depends on PPC_BOOK3S_64 + +config E5500_CPU + bool "Freescale e5500" + depends on E500 + +config E6500_CPU + bool "Freescale e6500" + depends on E500 endchoice From 847f56b0cc2fe431a1272eb586e316ba2c02c55f Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Thu, 15 Aug 2013 19:19:10 -0500 Subject: [PATCH 05/11] powerpc/e500: Set -mcpu flag for 32-bit e500 Unlike 64-bit, we don't currently support multiplatform between e500 and non-e500, so the -mcpu is not configurable at this time. -msoft-float is specified when testing for -mcpu=8540 because otherwise some older toolchains will fail with "error: E500 and FPRs not supported". Signed-off-by: Scott Wood --- arch/powerpc/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 32dfd5dc2be6..51cfb78d4061 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -104,6 +104,14 @@ E5500_CPU := $(call cc-option,-mcpu=e500mc64,-mcpu=powerpc64) CFLAGS-$(CONFIG_E5500_CPU) += $(E5500_CPU) CFLAGS-$(CONFIG_E6500_CPU) += $(call cc-option,-mcpu=e6500,$(E5500_CPU)) +ifeq ($(CONFIG_PPC32),y) +ifeq ($(CONFIG_PPC_E500MC),y) +CFLAGS-y += $(call cc-option,-mcpu=e500mc,-mcpu=powerpc) +else +CFLAGS-$(CONFIG_E500) += $(call cc-option,-mcpu=8540 -msoft-float,-mcpu=powerpc) +endif +endif + CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell) KBUILD_CPPFLAGS += -Iarch/$(ARCH) From b9b5350b828276169b3e33d154e9f8bbd4b262a6 Mon Sep 17 00:00:00 2001 From: "Haijun.Zhang" Date: Wed, 17 Jul 2013 13:12:27 +0800 Subject: [PATCH 06/11] powerpc/85xx: Add support for 85xx cpu type detection Add this file to help detect cpu type in runtime. These macros will be more favorable for driver to apply errata and workaround to specified cpu type. Signed-off-by: Haijun Zhang Signed-off-by: Zhao Chenhui Signed-off-by: Scott Wood --- arch/powerpc/include/asm/mpc85xx.h | 92 ++++++++++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 arch/powerpc/include/asm/mpc85xx.h diff --git a/arch/powerpc/include/asm/mpc85xx.h b/arch/powerpc/include/asm/mpc85xx.h new file mode 100644 index 000000000000..736d4acc05a8 --- /dev/null +++ b/arch/powerpc/include/asm/mpc85xx.h @@ -0,0 +1,92 @@ +/* + * MPC85xx cpu type detection + * + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_PPC_MPC85XX_H +#define __ASM_PPC_MPC85XX_H + +#define SVR_REV(svr) ((svr) & 0xFF) /* SOC design resision */ +#define SVR_MAJ(svr) (((svr) >> 4) & 0xF) /* Major revision field*/ +#define SVR_MIN(svr) (((svr) >> 0) & 0xF) /* Minor revision field*/ + +/* Some parts define SVR[0:23] as the SOC version */ +#define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFF7FF) /* SOC Version fields */ + +#define SVR_8533 0x803400 +#define SVR_8535 0x803701 +#define SVR_8536 0x803700 +#define SVR_8540 0x803000 +#define SVR_8541 0x807200 +#define SVR_8543 0x803200 +#define SVR_8544 0x803401 +#define SVR_8545 0x803102 +#define SVR_8547 0x803101 +#define SVR_8548 0x803100 +#define SVR_8555 0x807100 +#define SVR_8560 0x807000 +#define SVR_8567 0x807501 +#define SVR_8568 0x807500 +#define SVR_8569 0x808000 +#define SVR_8572 0x80E000 +#define SVR_P1010 0x80F100 +#define SVR_P1011 0x80E500 +#define SVR_P1012 0x80E501 +#define SVR_P1013 0x80E700 +#define SVR_P1014 0x80F101 +#define SVR_P1017 0x80F700 +#define SVR_P1020 0x80E400 +#define SVR_P1021 0x80E401 +#define SVR_P1022 0x80E600 +#define SVR_P1023 0x80F600 +#define SVR_P1024 0x80E402 +#define SVR_P1025 0x80E403 +#define SVR_P2010 0x80E300 +#define SVR_P2020 0x80E200 +#define SVR_P2040 0x821000 +#define SVR_P2041 0x821001 +#define SVR_P3041 0x821103 +#define SVR_P4040 0x820100 +#define SVR_P4080 0x820000 +#define SVR_P5010 0x822100 +#define SVR_P5020 0x822000 +#define SVR_P5021 0X820500 +#define SVR_P5040 0x820400 +#define SVR_T4240 0x824000 +#define SVR_T4120 0x824001 +#define SVR_T4160 0x824100 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 +#define SVR_B4860 0X868000 +#define SVR_G4860 0x868001 +#define SVR_G4060 0x868003 +#define SVR_B4440 0x868100 +#define SVR_G4440 0x868101 +#define SVR_B4420 0x868102 +#define SVR_B4220 0x868103 +#define SVR_T1040 0x852000 +#define SVR_T1041 0x852001 +#define SVR_T1042 0x852002 +#define SVR_T1020 0x852100 +#define SVR_T1021 0x852101 +#define SVR_T1022 0x852102 + +#define SVR_8610 0x80A000 +#define SVR_8641 0x809000 +#define SVR_8641D 0x809001 + +#define SVR_9130 0x860001 +#define SVR_9131 0x860000 +#define SVR_9132 0x861000 +#define SVR_9232 0x861400 + +#define SVR_Unknown 0xFFFFFF + +#endif From 75898156bcf0f524a00e5140bc644f2dda5a099a Mon Sep 17 00:00:00 2001 From: Chunhe Lan Date: Wed, 31 Jul 2013 05:39:26 +0800 Subject: [PATCH 07/11] powerpc/85xx: Add P1023RDB board support P1023RDB Specification: ----------------------- Memory subsystem: 512MB DDR3 (Fixed DDR on board) 64MB NOR flash 128MB NAND flash Ethernet: eTSEC1: Connected to Atheros AR8035 GETH PHY eTSEC2: Connected to Atheros AR8035 GETH PHY PCIe: Three mini-PCIe slots USB: Two USB2.0 Type A ports I2C: AT24C08 8K Board EEPROM (8 bit address) Signed-off-by: Chunhe Lan Cc: Scott Wood Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/p1023rdb.dts | 234 ++++++++++++++++++ .../{p1023rds_defconfig => p1023_defconfig} | 24 +- arch/powerpc/platforms/85xx/Kconfig | 4 +- arch/powerpc/platforms/85xx/p1023_rds.c | 24 +- 4 files changed, 280 insertions(+), 6 deletions(-) create mode 100644 arch/powerpc/boot/dts/p1023rdb.dts rename arch/powerpc/configs/85xx/{p1023rds_defconfig => p1023_defconfig} (88%) diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/p1023rdb.dts new file mode 100644 index 000000000000..0a06a88ddbd5 --- /dev/null +++ b/arch/powerpc/boot/dts/p1023rdb.dts @@ -0,0 +1,234 @@ +/* + * P1023 RDB Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Author: Chunhe Lan + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1023si-pre.dtsi" + +/ { + model = "fsl,P1023"; + compatible = "fsl,P1023RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + soc: soc@ff600000 { + ranges = <0x0 0x0 0xff600000 0x200000>; + + i2c@3000 { + eeprom@53 { + compatible = "at24,24c04"; + reg = <0x53>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + lbc: localbus@ff605000 { + reg = <0 0xff605000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 48MB for Root File System */ + reg = <0x00000000 0x03000000>; + label = "NOR Root File System"; + }; + + partition@3000000 { + /* 1MB for DTB Image */ + reg = <0x03000000 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@3100000 { + /* 14MB for Linux Kernel Image */ + reg = <0x03100000 0x00e00000>; + label = "NOR Linux Kernel Image"; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 14MB for Linux Kernel Image */ + reg = <0x00200000 0x00e00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1000000 { + /* 96MB for Root File System Image */ + reg = <0x01000000 0x06000000>; + label = "NAND Root File System"; + }; + + partition@7000000 { + /* 16MB for User Writable Area */ + reg = <0x07000000 0x01000000>; + label = "NAND Writable User area"; + }; + }; + }; + + pci0: pcie@ff60a000 { + reg = <0 0xff60a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + board_pci1: pci1: pcie@ff609000 { + reg = <0 0xff609000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ff60b000 { + reg = <0 0xff60b000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 + >; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + +}; + +/include/ "fsl/p1023si-post.dtsi" diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023_defconfig similarity index 88% rename from arch/powerpc/configs/85xx/p1023rds_defconfig rename to arch/powerpc/configs/85xx/p1023_defconfig index 18badca726c6..b06d37da44f4 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023_defconfig @@ -1,14 +1,13 @@ CONFIG_PPC_85xx=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -22,6 +21,8 @@ CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_MAC_PARTITION=y +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_P1023_RDB=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y @@ -64,10 +65,20 @@ CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -83,6 +94,8 @@ CONFIG_DUMMY=y CONFIG_FS_ENET=y CONFIG_FSL_PQ_MDIO=y CONFIG_E1000E=y +CONFIG_PHYLIB=y +CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y @@ -97,12 +110,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_QE=m +CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y CONFIG_GPIO_MPC8XXX=y @@ -122,6 +138,7 @@ CONFIG_USB_STORAGE=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_CMOS=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y @@ -162,6 +179,7 @@ CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y +CONFIG_STRICT_DEVMEM=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index efdd37c775ad..b8f0d3270d7a 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -112,10 +112,10 @@ config P1022_RDK reference board. config P1023_RDS - bool "Freescale P1023 RDS" + bool "Freescale P1023 RDS/RDB" select DEFAULT_UIMAGE help - This option enables support for the P1023 RDS board + This option enables support for the P1023 RDS and RDB boards config SOCRATES bool "Socrates" diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c index 9cc60a738834..2ae9d490c3d9 100644 --- a/arch/powerpc/platforms/85xx/p1023_rds.c +++ b/arch/powerpc/platforms/85xx/p1023_rds.c @@ -1,5 +1,5 @@ /* - * Copyright 2010-2011 Freescale Semiconductor, Inc. + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. * * Author: Roy Zang * @@ -86,6 +86,7 @@ static void __init mpc85xx_rds_setup_arch(void) } machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices); +machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices); static void __init mpc85xx_rds_pic_init(void) { @@ -106,6 +107,14 @@ static int __init p1023_rds_probe(void) } +static int __init p1023_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1023RDB"); + +} + define_machine(p1023_rds) { .name = "P1023 RDS", .probe = p1023_rds_probe, @@ -120,3 +129,16 @@ define_machine(p1023_rds) { #endif }; +define_machine(p1023_rdb) { + .name = "P1023 RDB", + .probe = p1023_rdb_probe, + .setup_arch = mpc85xx_rds_setup_arch, + .init_IRQ = mpc85xx_rds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; From 5a31057fc06c3ffa2df7f44c4e4884f3330707ff Mon Sep 17 00:00:00 2001 From: Wang Dongsheng Date: Thu, 8 Aug 2013 10:06:45 +0800 Subject: [PATCH 08/11] powerpc: add Book E support to 64-bit hibernation Update the 64-bit hibernation code to support Book E CPUs. Some registers and instructions are not defined for Book3e (SDR reg, tlbia instruction). SDR: Storage Description Register. Book3S and Book3E have different address translation mode, we do not need HTABORG & HTABSIZE to translate virtual address to real address. More registers are saved in BookE-64bit.(TCR, SPRG1) Signed-off-by: Wang Dongsheng Signed-off-by: Scott Wood --- arch/powerpc/kernel/swsusp_asm64.S | 45 ++++++++++++++++++++++++++++-- 1 file changed, 43 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/swsusp_asm64.S b/arch/powerpc/kernel/swsusp_asm64.S index 86ac1d90d02b..22045984835f 100644 --- a/arch/powerpc/kernel/swsusp_asm64.S +++ b/arch/powerpc/kernel/swsusp_asm64.S @@ -46,10 +46,19 @@ #define SL_r29 0xe8 #define SL_r30 0xf0 #define SL_r31 0xf8 -#define SL_SIZE SL_r31+8 +#define SL_SPRG1 0x100 +#define SL_TCR 0x108 +#define SL_SIZE SL_TCR+8 /* these macros rely on the save area being * pointed to by r11 */ + +#define SAVE_SPR(register) \ + mfspr r0, SPRN_##register ;\ + std r0, SL_##register(r11) +#define RESTORE_SPR(register) \ + ld r0, SL_##register(r11) ;\ + mtspr SPRN_##register, r0 #define SAVE_SPECIAL(special) \ mf##special r0 ;\ std r0, SL_##special(r11) @@ -103,8 +112,15 @@ _GLOBAL(swsusp_arch_suspend) SAVE_REGISTER(r30) SAVE_REGISTER(r31) SAVE_SPECIAL(MSR) - SAVE_SPECIAL(SDR1) SAVE_SPECIAL(XER) +#ifdef CONFIG_PPC_BOOK3S_64 + SAVE_SPECIAL(SDR1) +#else + SAVE_SPR(TCR) + + /* Save SPRG1, SPRG1 be used save paca */ + SAVE_SPR(SPRG1) +#endif /* we push the stack up 128 bytes but don't store the * stack pointer on the stack like a real stackframe */ @@ -151,6 +167,7 @@ copy_page_loop: bne+ copyloop nothing_to_copy: +#ifdef CONFIG_PPC_BOOK3S_64 /* flush caches */ lis r3, 0x10 mtctr r3 @@ -167,6 +184,7 @@ nothing_to_copy: sync tlbia +#endif ld r11,swsusp_save_area_ptr@toc(r2) @@ -208,16 +226,39 @@ nothing_to_copy: RESTORE_REGISTER(r29) RESTORE_REGISTER(r30) RESTORE_REGISTER(r31) + +#ifdef CONFIG_PPC_BOOK3S_64 /* can't use RESTORE_SPECIAL(MSR) */ ld r0, SL_MSR(r11) mtmsrd r0, 0 RESTORE_SPECIAL(SDR1) +#else + /* Restore SPRG1, be used to save paca */ + ld r0, SL_SPRG1(r11) + mtsprg 1, r0 + + RESTORE_SPECIAL(MSR) + + /* Restore TCR and clear any pending bits in TSR. */ + RESTORE_SPR(TCR) + lis r0, (TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS)@h + mtspr SPRN_TSR, r0 + + /* Kick decrementer */ + li r0, 1 + mtdec r0 + + /* Invalidate all tlbs */ + bl _tlbil_all +#endif RESTORE_SPECIAL(XER) sync addi r1,r1,-128 +#ifdef CONFIG_PPC_BOOK3S_64 bl slb_flush_and_rebolt +#endif bl do_after_copyback addi r1,r1,128 From afb41a35ef26c564765e6b47925b9d8a29cf529f Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Fri, 2 Aug 2013 14:39:09 +0800 Subject: [PATCH 09/11] powerpc/85xx: Add SEC6.0 device tree Add device tree for SEC 6.0 used on C29x silicon. Signed-off-by: Mingkai Hu Signed-off-by: Po Liu Signed-off-by: Scott Wood --- .../devicetree/bindings/crypto/fsl-sec6.txt | 157 ++++++++++++++++++ arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi | 56 +++++++ 2 files changed, 213 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/fsl-sec6.txt create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt new file mode 100644 index 000000000000..c0a20cd972e3 --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt @@ -0,0 +1,157 @@ +SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM). +Currently Freescale powerpc chip C29X is embeded with SEC 6. +SEC 6 device tree binding include: + -SEC 6 Node + -Job Ring Node + -Full Example + +===================================================================== +SEC 6 Node + +Description + + Node defines the base address of the SEC 6 block. + This block specifies the address range of all global + configuration registers for the SEC 6 block. + For example, In C293, we could see three SEC 6 node. + +PROPERTIES + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v6.0". + + - fsl,sec-era + Usage: optional + Value type: + Definition: A standard property. Define the 'ERA' of the SEC + device. + + - #address-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. + + - #size-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. + + - reg + Usage: required + Value type: + Definition: A standard property. Specifies the physical + address and length of the SEC 6 configuration registers. + + - ranges + Usage: required + Value type: + Definition: A standard property. Specifies the physical address + range of the SEC 6.0 register space (-SNVS not included). A + triplet that includes the child address, parent address, & + length. + + Note: All other standard properties (see the ePAPR) are allowed + but are optional. + +EXAMPLE + crypto@a0000 { + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + }; + +===================================================================== +Job Ring (JR) Node + + Child of the crypto node defines data processing interface to SEC 6 + across the peripheral bus for purposes of processing + cryptographic descriptors. The specified address + range can be made visible to one (or more) cores. + The interrupt defined for this node is controlled within + the address range of this node. + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v6.0-job-ring". + + - reg + Usage: required + Value type: + Definition: Specifies a two JR parameters: an offset from + the parent physical address and the length the JR registers. + + - interrupts + Usage: required + Value type: + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + +EXAMPLE + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <49 2 0 0>; + }; + +=================================================================== +Full Example + +Since some chips may contain more than one SEC, the dtsi contains +only the node contents, not the node itself. A chip using the SEC +should include the dtsi inside each SEC node. Example: + +In qoriq-sec6.0.dtsi: + + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; + +In the C293 device tree, we add the include of public property: + + crypto@a0000 { + /include/ "qoriq-sec6.0.dtsi" + } + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0 0xa0000 0x20000>; + + jr@1000 { + interrupts = <49 2 0 0>; + }; + + jr@2000 { + interrupts = <50 2 0 0>; + }; + }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi new file mode 100644 index 000000000000..f75b4f820c3c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi @@ -0,0 +1,56 @@ +/* + * QorIQ Sec/Crypto 6.0 device tree stub + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + compatible = "fsl,sec-v6.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; From 2c2f036afee7c28a2019b34134c4ea002a2d2c36 Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Fri, 2 Aug 2013 14:39:10 +0800 Subject: [PATCH 10/11] powerpc/85xx: Add silicon device tree for C293 Signed-off-by: Mingkai Hu Signed-off-by: Po Liu Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/fsl/c293si-post.dtsi | 193 +++++++++++++++++++++ arch/powerpc/boot/dts/fsl/c293si-pre.dtsi | 63 +++++++ 2 files changed, 256 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/c293si-post.dtsi create mode 100644 arch/powerpc/boot/dts/fsl/c293si-pre.dtsi diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi new file mode 100644 index 000000000000..bd208320bff5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi @@ -0,0 +1,193 @@ +/* + * C293 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,c293-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,c293-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" + L2: l2-cache-controller@20000 { + compatible = "fsl,c293-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,c293-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + + crypto@80000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@80000 { + reg = <0x80000 0x20000>; + ranges = <0x0 0x80000 0x20000>; + + jr@1000{ + interrupts = <45 2 0 0>; + }; + jr@2000{ + interrupts = <57 2 0 0>; + }; + }; + + crypto@a0000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0x0 0xa0000 0x20000>; + + jr@1000{ + interrupts = <49 2 0 0>; + }; + jr@2000{ + interrupts = <50 2 0 0>; + }; + }; + + crypto@c0000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@c0000 { + reg = <0xc0000 0x20000>; + ranges = <0x0 0xc0000 0x20000>; + + jr@1000{ + interrupts = <55 2 0 0>; + }; + jr@2000{ + interrupts = <56 2 0 0>; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + reg = <0x10000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + reg = <0x11000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + + global-utilities@e0000 { + compatible = "fsl,c293-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi new file mode 100644 index 000000000000..065049d76245 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * C293 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,C293"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; From 622e03eb3498c32ee29de5c1d6d381f443e58fad Mon Sep 17 00:00:00 2001 From: Mingkai Hu Date: Fri, 2 Aug 2013 14:39:11 +0800 Subject: [PATCH 11/11] powerpc/85xx: Add C293PCIE board support C293PCIE board is a series of Freescale PCIe add-in cards to perform as public key crypto accelerator or secure key management module. - 512KB platform SRAM in addition to 512K L2 Cache/SRAM - 512MB soldered DDR3 32bit memory - CPLD System Logic - 64MB x16 NOR flash and 4GB x8 NAND flash - 16MB SPI flash Signed-off-by: Mingkai Hu Signed-off-by: Po Liu Signed-off-by: Scott Wood --- arch/powerpc/boot/dts/c293pcie.dts | 223 +++++++++++++++++++++ arch/powerpc/configs/mpc85xx_defconfig | 1 + arch/powerpc/configs/mpc85xx_smp_defconfig | 1 + arch/powerpc/platforms/85xx/Kconfig | 6 + arch/powerpc/platforms/85xx/Makefile | 1 + arch/powerpc/platforms/85xx/c293pcie.c | 75 +++++++ 6 files changed, 307 insertions(+) create mode 100644 arch/powerpc/boot/dts/c293pcie.dts create mode 100644 arch/powerpc/platforms/85xx/c293pcie.c diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/c293pcie.dts new file mode 100644 index 000000000000..1238bda8901f --- /dev/null +++ b/arch/powerpc/boot/dts/c293pcie.dts @@ -0,0 +1,223 @@ +/* + * C293 PCIE Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/c293si-pre.dtsi" + +/ { + model = "fsl,C293PCIE"; + compatible = "fsl,C293PCIE"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@fffe1e000 { + reg = <0xf 0xffe1e000 0 0x2000>; + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x2 0x0 0xf 0xffdf0000 0x00010000>; + + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 1MB for DTB Image */ + reg = <0x0 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@100000 { + /* 8 MB for Linux Kernel Image */ + reg = <0x00100000 0x00800000>; + label = "NOR Linux Kernel Image"; + }; + + partition@900000 { + /* 53MB for rootfs */ + reg = <0x00900000 0x03500000>; + label = "NOR Rootfs Image"; + }; + + partition@3e00000 { + /* 1MB for blob encrypted key */ + reg = <0x03e00000 0x00100000>; + label = "NOR blob encrypted key"; + }; + + partition@3f00000 { + /* 512KB for u-boot Bootloader Image and evn */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 16MB for Linux Kernel Image */ + reg = <0x00200000 0x01000000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1200000 { + /* 4078MB for Root file System Image */ + reg = <0x00600000 0xfee00000>; + label = "NAND RFS Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,c293pcie-cpld"; + reg = <0x2 0x0 0x20>; + }; +}; + +&soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c1024"; + reg = <0x50>; + }; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 10.5MB for RFS Image */ + reg = <0x00580000 0x00a80000>; + label = "SPI Flash RFS Image"; + }; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <2 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x2>; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; +/include/ "fsl/c293si-post.dtsi" diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index b90c7af2ca1e..dc098d988211 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -27,6 +27,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_C293_PCIE=y CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 9ced85188534..5bca60161bb3 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -30,6 +30,7 @@ CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y +CONFIG_C293_PCIE=y CONFIG_P1010_RDB=y CONFIG_P1022_DS=y CONFIG_P1022_RDK=y diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index b8f0d3270d7a..de2eb9320993 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -32,6 +32,12 @@ config BSC9131_RDB StarCore SC3850 DSP Manufacturer : Freescale Semiconductor, Inc +config C293_PCIE + bool "Freescale C293PCIE" + select DEFAULT_UIMAGE + help + This option enables support for the C293PCIE board + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 2eab37ea4a9d..53c9f75a6907 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o obj-y += common.o obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o +obj-$(CONFIG_C293_PCIE) += c293pcie.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o diff --git a/arch/powerpc/platforms/85xx/c293pcie.c b/arch/powerpc/platforms/85xx/c293pcie.c new file mode 100644 index 000000000000..6208e49142bf --- /dev/null +++ b/arch/powerpc/platforms/85xx/c293pcie.c @@ -0,0 +1,75 @@ +/* + * C293PCIE Board Setup + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "mpc85xx.h" + +void __init c293_pcie_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + + mpic_init(mpic); +} + + +/* + * Setup the architecture + */ +static void __init c293_pcie_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("c293_pcie_setup_arch()", 0); + + fsl_pci_assign_primary(); + + printk(KERN_INFO "C293 PCIE board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(c293_pcie, mpc85xx_common_publish_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init c293_pcie_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,C293PCIE")) + return 1; + return 0; +} + +define_machine(c293_pcie) { + .name = "C293 PCIE", + .probe = c293_pcie_probe, + .setup_arch = c293_pcie_setup_arch, + .init_IRQ = c293_pcie_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +};