Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

include/video/omap-panel-nokia-dsi.h

@@ -11,6 +11,7 @@ struct omap_dss_device;
  * @esd_interval: interval of ESD checks, 0 = disabled (ms)
  * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
  * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ * @pin_config: DSI pin configuration
  */
 struct nokia_dsi_panel_data {
 	const char *name;
@@ -24,6 +25,8 @@ struct nokia_dsi_panel_data {
 	unsigned ulps_timeout;
 
 	bool use_dsi_backlight;
+
+	struct omap_dsi_pin_config pin_config;
 };
 
 #endif /* __OMAP_NOKIA_DSI_PANEL_H */

include/video/omap-panel-tfp410.h

@@ -1,5 +1,5 @@
 /*
- * Header for DVI output driver
+ * Header for TFP410 chip driver
  *
  * Copyright (C) 2011 Texas Instruments Inc
  * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
@@ -17,21 +17,19 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef __OMAP_PANEL_DVI_H
-#define __OMAP_PANEL_DVI_H
+#ifndef __OMAP_PANEL_TFP410_H
+#define __OMAP_PANEL_TFP410_H
 
 struct omap_dss_device;
 
 /**
- * struct panel_dvi_platform_data - panel driver configuration data
- * @platform_enable: platform specific panel enable function
- * @platform_disable: platform specific panel disable function
+ * struct tfp410_platform_data - panel driver configuration data
  * @i2c_bus_num: i2c bus id for the panel
+ * @power_down_gpio: gpio number for PD pin (or -1 if not available)
  */
-struct panel_dvi_platform_data {
-	int (*platform_enable)(struct omap_dss_device *dssdev);
-	void (*platform_disable)(struct omap_dss_device *dssdev);
+struct tfp410_platform_data {
 	u16 i2c_bus_num;
+	int power_down_gpio;
 };
 
-#endif /* __OMAP_PANEL_DVI_H */
+#endif /* __OMAP_PANEL_TFP410_H */

include/video/omapdss.h

@@ -468,6 +468,21 @@ struct omap_overlay_manager {
 	int (*wait_for_vsync)(struct omap_overlay_manager *mgr);
 };
 
+/* 22 pins means 1 clk lane and 10 data lanes */
+#define OMAP_DSS_MAX_DSI_PINS 22
+
+struct omap_dsi_pin_config {
+	int num_pins;
+	/*
+	 * pin numbers in the following order:
+	 * clk+, clk-
+	 * data1+, data1-
+	 * data2+, data2-
+	 * ...
+	 */
+	int pins[OMAP_DSS_MAX_DSI_PINS];
+};
+
 struct omap_dss_device {
 	struct device dev;
 
@@ -490,17 +505,6 @@ struct omap_dss_device {
 		} sdi;
 
 		struct {
-			u8 clk_lane;
-			u8 clk_pol;
-			u8 data1_lane;
-			u8 data1_pol;
-			u8 data2_lane;
-			u8 data2_pol;
-			u8 data3_lane;
-			u8 data3_pol;
-			u8 data4_lane;
-			u8 data4_pol;
-
 			int module;
 
 			bool ext_te;
@@ -687,6 +691,8 @@ int omap_dsi_update(struct omap_dss_device *dssdev, int channel,
 int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel);
 int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id);
 void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel);
+int omapdss_dsi_configure_pins(struct omap_dss_device *dssdev,
+		const struct omap_dsi_pin_config *pin_cfg);
 
 int omapdss_dsi_display_enable(struct omap_dss_device *dssdev);
 void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,