Input: add support for NI Ettus Research USRP E3x0 button
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Moritz Fischer
committed by
Dmitry Torokhov
Dmitry Torokhov
parent
b388de8830
commit
846a7fc8f4
@@ -0,0 +1,25 @@
|
||||
National Instruments Ettus Research USRP E3x0 button driver
|
||||
|
||||
This module is part of the NI Ettus Research USRP E3x0 SDR.
|
||||
|
||||
This module provides a simple power button event via two interrupts.
|
||||
|
||||
Required properties:
|
||||
- compatible: should be one of the following
|
||||
- "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
|
||||
- interrupt-parent:
|
||||
- a phandle to the interrupt controller that it is attached to.
|
||||
- interrupts: should be one of the following
|
||||
- <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
|
||||
- interrupt-names: should be one of the following
|
||||
- "press", "release": For devices such as the NI Ettus Research USRP E3x0
|
||||
|
||||
Note: Interrupt numbers might vary depending on the FPGA configuration.
|
||||
|
||||
Example:
|
||||
button {
|
||||
compatible = "ettus,e3x0-button";
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <0 30 1>, <0 31 1>;
|
||||
interrupt-names = "press", "release";
|
||||
}
|
||||
@@ -48,6 +48,7 @@ epcos EPCOS AG
|
||||
epfl Ecole Polytechnique Fédérale de Lausanne
|
||||
epson Seiko Epson Corp.
|
||||
est ESTeem Wireless Modems
|
||||
ettus NI Ettus Research
|
||||
eukrea Eukréa Electromatique
|
||||
excito Excito
|
||||
fsl Freescale Semiconductor
|
||||
|
||||
@@ -93,6 +93,16 @@ config INPUT_BMA150
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called bma150.
|
||||
|
||||
config INPUT_E3X0_BUTTON
|
||||
tristate "NI Ettus Research USRP E3x0 Button support."
|
||||
default n
|
||||
help
|
||||
Say Y here to enable support for the NI Ettus Research
|
||||
USRP E3x0 Button.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called e3x0_button.
|
||||
|
||||
config INPUT_PCSPKR
|
||||
tristate "PC Speaker support"
|
||||
depends on PCSPKR_PLATFORM
|
||||
|
||||
@@ -26,6 +26,7 @@ obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
|
||||
obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
|
||||
obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
|
||||
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
|
||||
obj-$(CONFIG_INPUT_E3X0_BUTTON) += e3x0-button.o
|
||||
obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
|
||||
obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
|
||||
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
|
||||
|
||||
@@ -0,0 +1,157 @@
|
||||
/*
|
||||
* Copyright (c) 2014, National Instruments Corp. All rights reserved.
|
||||
*
|
||||
* Driver for NI Ettus Research USRP E3x0 Button Driver
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
static irqreturn_t e3x0_button_release_handler(int irq, void *data)
|
||||
{
|
||||
struct input_dev *idev = data;
|
||||
|
||||
input_report_key(idev, KEY_POWER, 0);
|
||||
input_sync(idev);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static irqreturn_t e3x0_button_press_handler(int irq, void *data)
|
||||
{
|
||||
struct input_dev *idev = data;
|
||||
|
||||
input_report_key(idev, KEY_POWER, 1);
|
||||
pm_wakeup_event(idev->dev.parent, 0);
|
||||
input_sync(idev);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int __maybe_unused e3x0_button_suspend(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
|
||||
if (device_may_wakeup(dev))
|
||||
enable_irq_wake(platform_get_irq_byname(pdev, "press"));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused e3x0_button_resume(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
|
||||
if (device_may_wakeup(dev))
|
||||
disable_irq_wake(platform_get_irq_byname(pdev, "press"));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(e3x0_button_pm_ops,
|
||||
e3x0_button_suspend, e3x0_button_resume);
|
||||
|
||||
static int e3x0_button_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct input_dev *input;
|
||||
int irq_press, irq_release;
|
||||
int error;
|
||||
|
||||
irq_press = platform_get_irq_byname(pdev, "press");
|
||||
if (irq_press < 0) {
|
||||
dev_err(&pdev->dev, "No IRQ for 'press', error=%d\n",
|
||||
irq_press);
|
||||
return irq_press;
|
||||
}
|
||||
|
||||
irq_release = platform_get_irq_byname(pdev, "release");
|
||||
if (irq_release < 0) {
|
||||
dev_err(&pdev->dev, "No IRQ for 'release', error=%d\n",
|
||||
irq_release);
|
||||
return irq_release;
|
||||
}
|
||||
|
||||
input = devm_input_allocate_device(&pdev->dev);
|
||||
if (!input)
|
||||
return -ENOMEM;
|
||||
|
||||
input->name = "NI Ettus Research USRP E3x0 Button Driver";
|
||||
input->phys = "e3x0_button/input0";
|
||||
input->dev.parent = &pdev->dev;
|
||||
|
||||
input_set_capability(input, EV_KEY, KEY_POWER);
|
||||
|
||||
error = devm_request_irq(&pdev->dev, irq_press,
|
||||
e3x0_button_press_handler, 0,
|
||||
"e3x0-button", input);
|
||||
if (error) {
|
||||
dev_err(&pdev->dev, "Failed to request 'press' IRQ#%d: %d\n",
|
||||
irq_press, error);
|
||||
return error;
|
||||
}
|
||||
|
||||
error = devm_request_irq(&pdev->dev, irq_release,
|
||||
e3x0_button_release_handler, 0,
|
||||
"e3x0-button", input);
|
||||
if (error) {
|
||||
dev_err(&pdev->dev, "Failed to request 'release' IRQ#%d: %d\n",
|
||||
irq_release, error);
|
||||
return error;
|
||||
}
|
||||
|
||||
error = input_register_device(input);
|
||||
if (error) {
|
||||
dev_err(&pdev->dev, "Can't register input device: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, input);
|
||||
device_init_wakeup(&pdev->dev, 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int e3x0_button_remove(struct platform_device *pdev)
|
||||
{
|
||||
device_init_wakeup(&pdev->dev, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id e3x0_button_match[] = {
|
||||
{ .compatible = "ettus,e3x0-button", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, e3x0_button_match);
|
||||
#endif
|
||||
|
||||
static struct platform_driver e3x0_button_driver = {
|
||||
.driver = {
|
||||
.name = "e3x0-button",
|
||||
.of_match_table = of_match_ptr(e3x0_button_match),
|
||||
.pm = &e3x0_button_pm_ops,
|
||||
},
|
||||
.probe = e3x0_button_probe,
|
||||
.remove = e3x0_button_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(e3x0_button_driver);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Moritz Fischer <moritz.fischer@ettus.com>");
|
||||
MODULE_DESCRIPTION("NI Ettus Research USRP E3x0 Button driver");
|
||||
MODULE_ALIAS("platform:e3x0-button");
|
||||
Reference in New Issue
Block a user