Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

include/linux/ieee80211.h

@@ -1085,12 +1085,12 @@ enum ieee80211_eid {
 	WLAN_EID_TIM = 5,
 	WLAN_EID_IBSS_PARAMS = 6,
 	WLAN_EID_CHALLENGE = 16,
-	/* 802.11d */
+
 	WLAN_EID_COUNTRY = 7,
 	WLAN_EID_HP_PARAMS = 8,
 	WLAN_EID_HP_TABLE = 9,
 	WLAN_EID_REQUEST = 10,
-	/* 802.11e */
+
 	WLAN_EID_QBSS_LOAD = 11,
 	WLAN_EID_EDCA_PARAM_SET = 12,
 	WLAN_EID_TSPEC = 13,
@@ -1113,7 +1113,7 @@ enum ieee80211_eid {
 	WLAN_EID_PREP = 69,
 	WLAN_EID_PERR = 70,
 	WLAN_EID_RANN = 49,	/* compatible with FreeBSD */
-	/* 802.11h */
+
 	WLAN_EID_PWR_CONSTRAINT = 32,
 	WLAN_EID_PWR_CAPABILITY = 33,
 	WLAN_EID_TPC_REQUEST = 34,
@@ -1124,20 +1124,41 @@ enum ieee80211_eid {
 	WLAN_EID_MEASURE_REPORT = 39,
 	WLAN_EID_QUIET = 40,
 	WLAN_EID_IBSS_DFS = 41,
-	/* 802.11g */
+
 	WLAN_EID_ERP_INFO = 42,
 	WLAN_EID_EXT_SUPP_RATES = 50,
-	/* 802.11n */
+
 	WLAN_EID_HT_CAPABILITY = 45,
 	WLAN_EID_HT_INFORMATION = 61,
-	/* 802.11i */
+
 	WLAN_EID_RSN = 48,
-	WLAN_EID_TIMEOUT_INTERVAL = 56,
-	WLAN_EID_MMIE = 76 /* 802.11w */,
+	WLAN_EID_MMIE = 76,
 	WLAN_EID_WPA = 221,
 	WLAN_EID_GENERIC = 221,
 	WLAN_EID_VENDOR_SPECIFIC = 221,
-	WLAN_EID_QOS_PARAMETER = 222
+	WLAN_EID_QOS_PARAMETER = 222,
+
+	WLAN_EID_AP_CHAN_REPORT = 51,
+	WLAN_EID_NEIGHBOR_REPORT = 52,
+	WLAN_EID_RCPI = 53,
+	WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
+	WLAN_EID_ANTENNA_INFO = 64,
+	WLAN_EID_RSNI = 65,
+	WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
+	WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
+	WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
+	WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
+	WLAN_EID_MULTIPLE_BSSID = 71,
+
+	WLAN_EID_MOBILITY_DOMAIN = 54,
+	WLAN_EID_FAST_BSS_TRANSITION = 55,
+	WLAN_EID_TIMEOUT_INTERVAL = 56,
+	WLAN_EID_RIC_DATA = 57,
+	WLAN_EID_RIC_DESCRIPTOR = 75,
+
+	WLAN_EID_DSE_REGISTERED_LOCATION = 58,
+	WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
+	WLAN_EID_EXT_CHANSWITCH_ANN = 60,
 };
 
 /* Action category code */

include/linux/nl80211.h

@@ -270,6 +270,31 @@
  * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
  *	associated with this wiphy must be down and will follow.
  *
+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
+ *	channel for the specified amount of time. This can be used to do
+ *	off-channel operations like transmit a Public Action frame and wait for
+ *	a response while being associated to an AP on another channel.
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+ *	radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+ *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+ *	optionally used to specify additional channel parameters.
+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+ *	to remain on the channel. This command is also used as an event to
+ *	notify when the requested duration starts (it may take a while for the
+ *	driver to schedule this time due to other concurrent needs for the
+ *	radio).
+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
+ *	that will be included with any events pertaining to this request;
+ *	the cookie is also used to cancel the request.
+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
+ *	pending remain-on-channel duration if the desired operation has been
+ *	completed prior to expiration of the originally requested duration.
+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
+ *	uniquely identify the request.
+ *	This command is also used as an event to notify when a requested
+ *	remain-on-channel duration has expired.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -353,6 +378,9 @@ enum nl80211_commands {
 	NL80211_CMD_DEL_PMKSA,
 	NL80211_CMD_FLUSH_PMKSA,
 
+	NL80211_CMD_REMAIN_ON_CHANNEL,
+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -606,6 +634,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
  *	cache, a wiphy attribute.
  *
+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ *
+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -743,6 +775,10 @@ enum nl80211_attrs {
 	NL80211_ATTR_PMKID,
 	NL80211_ATTR_MAX_NUM_PMKIDS,
 
+	NL80211_ATTR_DURATION,
+
+	NL80211_ATTR_COOKIE,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,