arm64: tegra: Bump #address-cells and #size-cells

The #address-cells and #size-cells properties for the top-level bus were
set to 1 because that was enough to represent the register ranges of all
the IP blocks on that bus. However, most of these devices can do DMA to
a larger address space, so translation of DMA addresses needs to happen
in a 64-bit address space.

Partially this was already done by the memory controller increasing that
address space by setting #address-cells and #size-cells to 2, but a full
DMA address translation would still cause truncation when traversing to
the top-level bus.

Fix this by setting #address-cells = <2> and #size-cells = <2> on the
top-level bus and adjusting all "reg" and "ranges" properties of its
children.

While at it, also move the PCI and GPU nodes back under the top-level
bus where they belong. The were put outside of it to work around this
same problem.

Signed-off-by: Thierry Reding <treding@nvidia.com>

arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts

@@ -2184,7 +2184,6 @@
 							 GPIO_ACTIVE_LOW>;
 			};
 		};
-	};
 
 		pcie@14100000 {
 			status = "okay";
@@ -2246,6 +2245,7 @@
 			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
 				    "p2u-5", "p2u-6", "p2u-7";
 		};
+	};
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";

arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi

@@ -2209,7 +2209,6 @@
 							 GPIO_ACTIVE_LOW>;
 			};
 		};
-	};
 
 		pcie@14160000 {
 			status = "okay";
@@ -2250,6 +2249,7 @@
 			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
 				    "p2u-5", "p2u-6", "p2u-7";
 		};
+	};
 
 	fan: pwm-fan {
 		compatible = "pwm-fan";

arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts

@@ -2048,6 +2048,57 @@
 				};
 			};
 		};
+
+		pcie@14100000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_3>;
+			phy-names = "p2u-0";
+		};
+
+		pcie@14160000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ao>;
+
+			phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+			       <&p2u_hsio_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+		};
+
+		pcie@141a0000 {
+			status = "okay";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+			vpcie3v3-supply = <&vdd_3v3_pcie>;
+			vpcie12v-supply = <&vdd_12v_pcie>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
+
+		pcie-ep@141a0000 {
+			status = "disabled";
+
+			vddio-pex-ctl-supply = <&vdd_1v8_ls>;
+
+			reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+			nvidia,refclk-select-gpios = <&gpio_aon
+						      TEGRA234_AON_GPIO(AA, 4)
+						      GPIO_ACTIVE_HIGH>;
+
+			phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+			       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+			       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+			phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+				    "p2u-5", "p2u-6", "p2u-7";
+		};
 	};
 
 	gpio-keys {
@@ -2145,57 +2196,6 @@
 		label = "NVIDIA Jetson AGX Orin APE";
 	};
 
-	pcie@14100000 {
-		status = "okay";
-
-		vddio-pex-ctl-supply = <&vdd_1v8_ao>;
-
-		phys = <&p2u_hsio_3>;
-		phy-names = "p2u-0";
-	};
-
-	pcie@14160000 {
-		status = "okay";
-
-		vddio-pex-ctl-supply = <&vdd_1v8_ao>;
-
-		phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
-		       <&p2u_hsio_7>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
-	};
-
-	pcie@141a0000 {
-		status = "okay";
-
-		vddio-pex-ctl-supply = <&vdd_1v8_ls>;
-		vpcie3v3-supply = <&vdd_3v3_pcie>;
-		vpcie12v-supply = <&vdd_12v_pcie>;
-
-		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-			    "p2u-5", "p2u-6", "p2u-7";
-	};
-
-	pcie-ep@141a0000 {
-		status = "disabled";
-
-		vddio-pex-ctl-supply = <&vdd_1v8_ls>;
-
-		reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
-
-		nvidia,refclk-select-gpios = <&gpio_aon
-					      TEGRA234_AON_GPIO(AA, 4)
-					      GPIO_ACTIVE_HIGH>;
-
-		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-			    "p2u-5", "p2u-6", "p2u-7";
-	};
-
 	pwm-fan {
 		compatible = "pwm-fan";
 		pwms = <&pwm3 0 45334>;